4 turns out from stock and a 4 degree advance, I’m pushing 35 lbs of boost with OR8785 marine nozzles, a BullyDog Stage II turbo, and a heavier dozer spring on the AFRC.
Hi can I get more smokey smoke from the afc without messing with the screws. I want smoke but I’m happy with my stock power it doesn’t get hot and I’m happy
What functions does each screw have? I have heard that they say that one is the torque one and the other is the diesel passage.. but I don't know which one it is for each thing.. by the way, excellent video 👍🏻👍🏻
as a Cat tech you don't do this unless you know what you are doing and have the proper tools that is not here and they don't always turn 1 for 1 that is the FLS FTS settings there is a measurements that this goes to but if people would like to do it this way I am happy to rebuild eng. when you destroy it. and if you get emissions and the seal tag is not there like in video it wont pass and if a mechanic is caught doing adjustments improperly its a nice EPA fine.
I always had a known Caterpillar mechanic do all of the injection system adjustments on my mechanical and electronic Cats. I never had any trouble with them.
I’m not 100% sure since I don’t have a way to measure horsepower but guessing anywhere from 50 HP 80 HP if you turn those screws all the way out you can get well over 600 hp, but it gets hot don’t get greedy or you’re blow it up.
Easily the best made video for this adj. Thank you so much for keeping it short & sweet.
Good video. Much easier to understand seeing the motor out of the frame rails!
lovely vedio
4 turns out from stock and a 4 degree advance, I’m pushing 35 lbs of boost with OR8785 marine nozzles, a BullyDog Stage II turbo, and a heavier dozer spring on the AFRC.
What is stock?
Hi can I get more smokey smoke from the afc without messing with the screws. I want smoke but I’m happy with my stock power it doesn’t get hot and I’m happy
More Smokey Smoke! Love the Smokey Smoke!
Smoke doesn't mean power.
@@SamMaass-s5hthanks Captain obvious…. But it bothers people like you, and I was put on this earth to do just that!
Good work bro
Can you turn the smoky smoke screw in a little bit to get a little smoke instead of all the way
Yes, you can turn it a little bit. If you like the result, you can leave it alone or if you want more smoke you open it a little bit more.
just take those screws out, that pump cant give too much anyway.
Exelent thanks
Good video, do you know any good quality and affordable injectors for a 3406b?
Heavy highway parts and LTA and heavy duty pros that’s where I get most of my aftermarket parts from injectors, rebuilt kits
They don't have injectors the have nozzles but the best thing is to match your turbo with your nozzles sorta like a cam and lifters on a V8 gas motor
OR8785 marine nozzles
@@michaelsetliff1926 Make sure your nozzles match your piston tops , you don't want to burn holes in your tops because they don't match
What functions does each screw have? I have heard that they say that one is the torque one and the other is the diesel passage.. but I don't know which one it is for each thing.. by the way, excellent video 👍🏻👍🏻
Or get a short socket on and extension and it will probably reach
So how much hp do you get from doing this ?
It depends how many times you turn it if you turn it all the way you can get 700 or more and depending on the upgrades you have done to the engine
A perro what happened to the Cummins
Don’t be jealous Catapillar‘s turn
Four 360 turns on each screw?
Yes, you can do more turns if you want but that depends on you
👍😜🤠
Can this same thing be done on a 3406A
It’s different the3406A only has one turn out screw
@@mexicanmexican8682 But it's done the same way?
Yes
@@mexicanmexican8682 thank you so much my friend I appreciate it
as a Cat tech you don't do this unless you know what you are doing and have the proper tools that is not here and they don't always turn 1 for 1 that is the FLS FTS settings there is a measurements that this goes to but if people would like to do it this way I am happy to rebuild eng. when you destroy it. and if you get emissions and the seal tag is not there like in video it wont pass and if a mechanic is caught doing adjustments improperly its a nice EPA fine.
Hey Bud we stopped caring about emissions back in the 60’s
Those screws adjust the smiles per gallon and nothing more here.
I always had a known Caterpillar mechanic do all of the injection system adjustments on my mechanical and electronic Cats. I never had any trouble with them.
Stay in California. We love our B’s in coal country
😮😮😮😮😮😮😮😮😂
You're not a mechanic you just do oil changes 🤣
What kind of HP increase is four turns
I’m not 100% sure since I don’t have a way to measure horsepower but guessing anywhere from 50 HP 80 HP if you turn those screws all the way out you can get well over 600 hp, but it gets hot don’t get greedy or you’re blow it up.
@@mexicanmexican8682 aww shucks let him melt it down. Mechanic wants work.