How To Street Tune Part 2 Hondata S300 Reading Logs
ฝัง
- เผยแพร่เมื่อ 5 ธ.ค. 2024
- Today we are showing you how to load a datalog and review it.
**Start with a conservative map**
*Only add timing on a dyno or with extensive knowledge on how to read spark plugs*
Link To Basemaps:
mailchi.mp/5e2...
All Motor Basemap Setup:
Stock 240cc Injectors
Stock Map Sensor
2-Step
Shift Light 7500RPM
Rev Limiter 8000
To start tuning you need: (1)Hondata S300 Installed in a Vtec ECU. (1) Wideband (1)Be comfortable cutting 1 wire and joining it to a new wire.
Hondata S300 + ECU Combo from HA Motorsports On Our Website below:
kugantuning.co...
You can monitor your Air/Fuel Ratio using this AEM X Series Wideband: (The 0-5v White Wire should be connected to OBD1 ECU Pin D14) (Do not splice)
kugantuning.co...
Follow and subscribe to us below on our social media platforms.
IG ~ / kugantuning
Twitter ~ / kugantuning
TH-cam ~ / @kugantuning
You can download Hondata S300 Smanager from Hondata below
www.hondata.co...
POPS & BANGS READ HERE
Use the overrun fuel table settings in Parameters / TPS & Parameters / TPS IGN