Head lights look good on her dude! About the dent in the bumper, take the bumper off, lay it down where it won’t scratch, and take a wood 2x4 and a hammer to work that dent out. The wood is a little more forgiving than metal on metal. As far as the grille goes I’d put a chrome Harley Davidson grille in it, my dad put one in his 99 and it looks awesome!
I have the same truck but mines has the whole headlight Assembly together I wanted to know that do I have to do some modifications or can I just swap the whole front clip on it. Do you have any idea’s
Also do auxbeam led, switchbacks n lowbean/highbeam, do led reverse lights the red ones n white ones, led license plate lights, and get the front bumper with fog lights
Polish the truck. Change the brake lights. Full led conversion. Add a grille guard plus winch. Lockers. Skid plates. Sliders. Radio and speaker upgrade.+ rearview camera. Roll bar with light pods. Exhaust. Grille guard and roll bar in chrome. I know you said you dont want anymore chrome but it could work.
Squat trucks are so ugly! What's the point? They don't have an off road or on road advantage and is stupid looking (In my opinion). I'm just curious as to why people do it looks like people can only afford half of a lift kit.
BUSTED actually a little bit of squat changes your center of gravity and if you take a vehicle off jumps you want a little bit of squat because it helps not to flip it keeps the vehicle level in the air instead of the nose going into the ground
I heard the seal on the transmission on baby squat will ruin and start leaking because of the lean. I have the same suspension set up and was wondering if you could do a video on that. They say it’s because the drive shaft is being pressed into the transmission
You're right Asheton because you're changing the angle of the driveshaft. You would have to adjust the pinion angle on the rear axle to compensate the change. Just look at lift kits, usually the rear blocks are tapered to get a proper driveshaft angle. To me, squatting your truck ain't worth tearing up your driveline just to look cool
Has the spark plugs been changed? If not, I would highly recommend that. Those 5.4s are known for having the spark plugs seize in place. Definately would put some anti-sieze on them.
Those clips are such a pain in the ass, i recently had to remove everything to swap out a fake nasty chrome grill to a color matched one off a truck i found in the junk yard, i should have waited till i had the new lights cause i definitely do not want to do this shit again lol but larry lookin mint
adam vixaysack I am hosting a Truck and Jeep show @ Larry Puckett Chevrolet Prattville AL December 21,2019 11-2 Entry fee to enter a truck or Jeep is $25.00. Will be judged on Best Overall Best wheels Best lighting Best lift Most custom Entry for General public will be donations and toys. All money and toys will be going to Children’s Hospital in Birmingham.
F-250 rear taillights fit these trucks, you should put those on, bit of a different look than the stock ones
Head lights look good on her dude! About the dent in the bumper, take the bumper off, lay it down where it won’t scratch, and take a wood 2x4 and a hammer to work that dent out. The wood is a little more forgiving than metal on metal. As far as the grille goes I’d put a chrome Harley Davidson grille in it, my dad put one in his 99 and it looks awesome!
some hard metal.
Clean homie 2019 was a good year on your channel, lookin forward to whats in store for 2020
You should get a roof spoiler coler matched
Move that wheel and tires setup what is that setup btw? Wouldn't mind doung the same to my 98 fx2
I have the same truck but mines has the whole headlight Assembly together I wanted to know that do I have to do some modifications or can I just swap the whole front clip on it. Do you have any idea’s
Will u send me the link from where u got Larry’s clear headlights trying to get some for my 1997 f150
Where did you get the wood accent pannels
That’s 97 f150 is way more reliable than the new white Chevy
Just get a 99-03 front bumper piece?
What device are you using to record?
Replace the under hood bulb with LED and save your battery
Headlights make a difference!
How many of y’all are from the gen 10 Facebook groups
I need to join them!
What’s the rims name ? And tire size and brand ? I wanna do the same thing to my Ford F-150
Shoulda got lightning headlights the corners have a small amber strip which imo look better, but ole Larry is looking good
Also do auxbeam led, switchbacks n lowbean/highbeam, do led reverse lights the red ones n white ones, led license plate lights, and get the front bumper with fog lights
Do these still keep water out?. Might buy them for mine.
GM guy all the way but I am just loving ole Larry. from Florence Alabama keep up the content bro
Lparker 328 Go Falcons!
Do a 99-03 STX grille.
This dude stole the dent off my front bumper
Did you take the whip off?
Hey man what size tires and rims ya running
Definitely a full billet grill is needed
Polish the truck. Change the brake lights. Full led conversion. Add a grille guard plus winch. Lockers. Skid plates. Sliders. Radio and speaker upgrade.+ rearview camera. Roll bar with light pods. Exhaust. Grille guard and roll bar in chrome. I know you said you dont want anymore chrome but it could work.
best way to get that dent out is a front license plate...…..
lol
I believe you can fit anything 16 or bigger on baby squat. But they do make adaptors
Paint match the black pieces on the bunpers
Wheels still for sale ?
what size tires and rims?
2inch spacers will let you run 15s on your new body
What brand tool box is Larry sporting ??’
uws
Cab lights
Now you should put some stars in the roof
Do a black billet grille with a polished aluminum front. Would go great together
Where’s the duramax been at
He sold it.
Put switchback bulbs in. No amber bulbs it kills the look
This is my favorite build! My opinion if it was a lil bit taller and more squatted I would love it! But I do love this truck Great build
Squat trucks are so ugly! What's the point? They don't have an off road or on road advantage and is stupid looking (In my opinion). I'm just curious as to why people do it looks like people can only afford half of a lift kit.
BUSTED fair point. I personally love the way squatted trucks look. It’s just my favorite stance on a truck.
@@garretteskridge2552 Hey we all got opinions peace skin!
BUSTED actually a little bit of squat changes your center of gravity and if you take a vehicle off jumps you want a little bit of squat because it helps not to flip it keeps the vehicle level in the air instead of the nose going into the ground
@@buddyrouse3439 Makes sense but, hey good talkin to ya man!
I’ve owned a 2001 Chevy, 2004 dodge and now your making me want a ford like that
I like the way the bug guard looks on it, I won't take mine off either.
Led taillights next?👀💯
Larry needs a GoLight for sure!
been waiting for clears and leds for a while, glad you finally got clears, just need leds and switchbacks.
Do a 2003 f150 bumper on Larry.
I heard the seal on the transmission on baby squat will ruin and start leaking because of the lean. I have the same suspension set up and was wondering if you could do a video on that. They say it’s because the drive shaft is being pressed into the transmission
You're right Asheton because you're changing the angle of the driveshaft. You would have to adjust the pinion angle on the rear axle to compensate the change. Just look at lift kits, usually the rear blocks are tapered to get a proper driveshaft angle. To me, squatting your truck ain't worth tearing up your driveline just to look cool
Put led in the headlights and switchback in turn signals
I’m getting those same headlights for mine and I was worried they weren’t gunna look that good but my god I can’t wait to get mine now😍
Put a 99 to 03 front bumper on Larry
Hey man, if you wanna use LED headlights and bulbs for Larry, look at F150Leds.com they have leds for every halogen bulb inside and out
Larry lookin clean son!
Do the 02 ford front end
Mm yes a 10th gen
Looks sweet
looks sick but i would have gotten single piece lights
I saw you in Hueytown Friday night
Great video. Great look on Larry.
Do leds! And take that bug guard off the hood please ! It would look so clean
GM guy here but have always loved 10th gen f150s
I hope one day I can see you leaving work in that 😂😂
Red f-250 by the way 🤣🤣🤣
Also are dad nows how to fix the dent on the front bumper
Made the truck look ten years newer. Only other think I’d change is tails and a different style chrome and color matched front bumper. Beautiful truck
Has the spark plugs been changed? If not, I would highly recommend that. Those 5.4s are known for having the spark plugs seize in place. Definately would put some anti-sieze on them.
Put a bullydog programmer on it
Finally!!! It looks so clean!!!
get you a switch back led bulb for the turn signal i did on my 03 f150 and its awsome
Hey Imfscrew! Just uploaded another video for you, think this ones gonna be more exciting for you lol. Please check it out! :D
Squat the back more cause it is kinda less than baby squat have the fender close to the tire
Phillip Bass07 nah man just level the truck
Those clips are such a pain in the ass, i recently had to remove everything to swap out a fake nasty chrome grill to a color matched one off a truck i found in the junk yard, i should have waited till i had the new lights cause i definitely do not want to do this shit again lol but larry lookin mint
That’s the only reason I haven’t took the side trim pieces off my 2005 Chevy Silverado 1500.
I wanna see the cats taken out personally
Looks good man throw some LEDs and put some tail lights on it now
Plz take the big guard off
Remove the bug guard in the hood
Is Larry a manual?
Do a 99-03 grill and bumper on larry
What part of Alabama are you from ??
Why don’t you put a cold air intake (k&n)
What do you do for a livin
Milan Minto NC fishing he’s my cousin he works at Pizza Hut Mon-Fri 9-6 pm
Milan Minto NC fishing he’s my cousin he works at Pizza Hut Mon-Fri 9-6 pm
Where’s the whip?
Took it off to pull it inside and forgot to put it back on
Should have got new bulbs to really make that front end pop but we have all been waiting on clears so its all good 🤷🏼♂️
Raise the rear end up to level with the front
I got the black housing headlights and they look amazing
Looks great
LED taillights next 👍
Wheres the antenna
side molding delete?
I’m hosting a truck show this Saturday on the 21
Where at
adam vixaysack I am hosting a Truck and Jeep show
@ Larry Puckett Chevrolet
Prattville AL
December 21,2019 11-2
Entry fee to enter a truck or Jeep is $25.00.
Will be judged on Best Overall
Best wheels
Best lighting
Best lift
Most custom
Entry for General public will be donations and toys.
All money and toys will be going to Children’s Hospital in Birmingham.
Put nightshades on the tail lights and leave the reverse unpainted
I’m a fan of the stock grille, I’d just re paint it metallic black.
What type of grill style is it?
And a chrome billet grille!
Hey I'd hate to see you go to the work and realize it after but the wheels done swap over because you have a 5 lug ford and a 6 lug chevy
Collinb_6.6 that’s why he said he’s getting adapters
I personally love the bug guard that body style ford and 88-98 Chevys look weird without it in my opinion😃
Clean truck man! You should swap the bumper out for the ones on late 99 to 2004 and the grill to
More Dirt Rd., Chronicles
Swap the the front end to the 02 f150
Take the bug guard off the hood and put white rocks lights on it
Roll pan bumper for Larry
dont take the guard off
Your gonna have to buy a led relay if your doing led bulba in the headlights and blinkers
You should put the tailights and third brake light now🥳
Way easier than my 96 😂😂
YESSS FINALLY