My thoughts of the Route 129 Windshield. Mix Reviews to sum it up. I am willing to give it a chance. It appears that with time, the windshield is looking more favorable to me. We will see!
D, that's about the best one I've seen. Blocks that chest wind on the highway. As far as the lettering 'loving mine'. Keep posting. I'm with you over here in Charlotte!!
That’s the same windshield that came on my bike. (I bought it used) it seemed to just push wind up into my face/ helmet. Yours looks better. Mine is clear. I had just took it off and put the gauge cluster shield back on.
Gauge cluster looks way better to me. I knew I didn't want clear. I believe what I am going to do is use the gauge cluster for everyday use and switch out if I take longer trips.
Probably shoukd have rode it before giving feedback. You notice it on your lower half as you have found out, but you still look over it like a sportbike. I have a Blueridge i cut down to the 129 height about 4 years ago. I took that gauge spoiler off when i got home and never put it back on. I added an xcreen deflector to it and have traveled out of state no problem.
I purchased the windshield from Canam website. I took it off for everyday use. Will be using it on longer trips. Thanks for the support! Enjoy the ride.
I like the look and set up. It accentuates the bike well. Your overall bike is nice. Question- the windshield can go over the gauge? Do the gauge have to be removed for installation? I’m about to have it installed and don’t want the gauge removed.
Bruh please don't do the lettering. A fully blacked out bike looks better. I'm looking for a monolith black f3 t myself so I can do some state to state. But your bike as of now looks great.
Yessir! It does look a bit "in your face" as installed on the bike, but honestly it doesn't look bad. Luckily you have a seat backrest to kind of even things out some. In my humble opinion, I'd probably keep it on the bike though.
Looks 🔥 man! But it needs to be pitch black. I do know what you mean on the height but you can lay painters tape across the top and cut that lip off. I’ve seen them done like that and they are really clean!! I definitely like it better than the old windshield. But you gotta do what you like but I think it’s 🔥 but would cut the the lip off and black it out! From the video it looks more gray than and piano black. Gloss black is what it needs!! Wife is right just needs to be pure gloss back! I think I see what you attempted. Looks like you tried to keep it gray with the new carbon fiber stickers but I think it throws it off. I believe you will be happier with the gloss black. Tire let’s need to be white with some flashes of red thrown in. The cannon ball is the most comfortable seat. Treat yourself don’t cheat yourself. You will shake your hard like you didn’t on the back rest and say “Man, why didn’t I do this first”. 😂 major comfort!
Dwism! Man that Route 129 is soooo 🔥 🔥🔥🔥🔥. I got a 23 F3s and i been waiting on you to drop this vid just so i can see how it look on yours. I was hoping you did a step by step video on how you painted it. I’m going to go ahead and grab the windshield but where did you get the paint and that carbon look?
I don’t have much in the sound system. I have the 2 speakers (JBL) from Slingmods!! lol.. if you go more than 5 mph, then you won’t hear anything. Just don’t like the look of the big speakers.🔊
Merry Christmas 🎄🎁 D.
Merry Christmas. Hope you and your family have a good Christmas!
D, that's about the best one I've seen. Blocks that chest wind on the highway. As far as the lettering 'loving mine'. Keep posting. I'm with you over here in Charlotte!!
Appreciate that feedback!!
I like it! What paint did you use?
It looks nice
Appreciate it!!!
Looks ok but that 7jurock looks much better wish I could send a pick.
Can you send me a picture to dwismwurks@gmail.com?
Keep it
Man that joint is hard bro! I have never seen one that style! She a keeper for me!!!!!!!!!
It’s the base model
Yes, base model with a lot of additions!
That’s the same windshield that came on my bike. (I bought it used) it seemed to just push wind up into my face/ helmet. Yours looks better. Mine is clear. I had just took it off and put the gauge cluster shield back on.
Gauge cluster looks way better to me. I knew I didn't want clear. I believe what I am going to do is use the gauge cluster for everyday use and switch out if I take longer trips.
Did the same to me. Making me dizzy so remove it and went with gauge cluster spoiler
I think if it increases your safety then it's a keeper. It's also 🔥🔥🔥 from the aesthetics perspective.
I think the windshield looks good. I my self think the tire letters don't look good. Just my opinion. Merry Christmas to you and your family.
Merry Christmas. I was torn with the letters, but some other bikes where it looked like fire.
I think it looks good man, I would leave it on for awhile, you might get used to it but at the end of the day, it's your choice?
Probably shoukd have rode it before giving feedback. You notice it on your lower half as you have found out, but you still look over it like a sportbike. I have a Blueridge i cut down to the 129 height about 4 years ago. I took that gauge spoiler off when i got home and never put it back on. I added an xcreen deflector to it and have traveled out of state no problem.
Love the windshield where did you get it looks great ❗️❗️❗️
I purchased the windshield from Canam website. I took it off for everyday use. Will be using it on longer trips. Thanks for the support! Enjoy the ride.
It looks good, if anything it could be blacker, more like the spyders glossy black
Man if you don't like it change it back. Especially if you don't mind the wind. I just don't like that particular one. I like Madstad
Yeap.
I like the look and set up. It accentuates the bike well. Your overall bike is nice.
Question- the windshield can go over the gauge? Do the gauge have to be removed for installation? I’m about to have it installed and don’t want the gauge removed.
Unfortunately, you cannot put that route on, with the gauge cluster on. I feel you!! The gauge cluster is sporty.
I appreciate your comment and support.
Bruh please don't do the lettering. A fully blacked out bike looks better. I'm looking for a monolith black f3 t myself so I can do some state to state. But your bike as of now looks great.
Yessir! It does look a bit "in your face" as installed on the bike, but honestly it doesn't look bad. Luckily you have a seat backrest to kind of even things out some. In my humble opinion, I'd probably keep it on the bike though.
Thanks! I think also it ages the bike!
That windshield looks like it is blocking nothing!
lol. Pushes air up
Ive been thinking about taking a dremel tool and redesigning mines
How much are you going to trim away?
@dwismwurks maybe the highest point
Looks 🔥 man! But it needs to be pitch black. I do know what you mean on the height but you can lay painters tape across the top and cut that lip off. I’ve seen them done like that and they are really clean!! I definitely like it better than the old windshield. But you gotta do what you like but I think it’s 🔥 but would cut the the lip off and black it out! From the video it looks more gray than and piano black. Gloss black is what it needs!! Wife is right just needs to be pure gloss back! I think I see what you attempted. Looks like you tried to keep it gray with the new carbon fiber stickers but I think it throws it off. I believe you will be happier with the gloss black. Tire let’s need to be white with some flashes of red thrown in. The cannon ball is the most comfortable seat. Treat yourself don’t cheat yourself. You will shake your hard like you didn’t on the back rest and say “Man, why didn’t I do this first”. 😂 major comfort!
Ok. Didn't think about the pitch black part maybe making a difference. Appreciate that. Will explore.
Nice man keep it on did you paint it
Dwism! Man that Route 129 is soooo 🔥 🔥🔥🔥🔥. I got a 23 F3s and i been waiting on you to drop this vid just so i can see how it look on yours. I was hoping you did a step by step video on how you painted it. I’m going to go ahead and grab the windshield but where did you get the paint and that carbon look?
I am going to respond again with what I used and where I purchased. I will give my thoughts about it as well and some of the feedback I received.
Do you have a video of how you paint it this windshield?
Also I just got the 2024 can-am spyder f3 ready for sound system what's your recommendation help
I don’t have much in the sound system. I have the 2 speakers (JBL) from Slingmods!! lol.. if you go more than 5 mph, then you won’t hear anything. Just don’t like the look of the big speakers.🔊
Where did you get it from? I want one please leave the link
I don't like that sheel on the bike 😂
Obtrusive it is! That’s why I took it off! Lol
It takes the good look away from your bike to mouch of stuff on a bike it make it look junking 😂
That was indeed part of the thoughts I was having as well.
Tire lettering is a waste of time and money. They burn off
It’s a negative!!!
That don't look good on your bike that windshield 😂
Yeah. Certain angles aren’t right to me.