This is the only video I found that explained how to set up the new motor before installing. Since it looked nothing like the old one and didn't come with instructions we assumed we'd ordered the wrong part, but this video saved the day. Thank you!
Thanks, this helped me a lot. Broke some clips, but that is what I get for buying crap. The only thing that would have made this video better is how to test to make sure we are replacing the right thing.
I had to buy a replacement but it only has one ground wire. I’m so confused now. The video is exactly what I needed just don’t understand what I’m doing with the pasty’s a bit different. I ordered per the refrigerator model number. Thank you for the very detailed and easy to understand video.
If you ordered the evaporator motor it should have came with the other wires as well not just the ground wire. What is the model number of your refrigerator? Did you order this part through AppliancePartsPros.com?
@@appliancepartspros thank you so much for your response. It’s the wrong part…sigh. We had a professional diagnose it since further research shows it may be a leak. It’d cost more to fix it than it was really worth. I appreciate these videos as I try to educate myself, thank you so much.
Hi, the fan motor is spinning (checked with cover off and can hear it), but no air is getting into fridge. Fridge is room temp, vents in the fridge look open to me. Should I still replace the motor?
If the fan motor is coming on then it's working, so it wouldn't need to be replaced. You will need to check the damper to make sure it's opening properly.
I wish they didn't make the freezer shelving and rails so difficult to remove! The hardest part for me is situating my large, old, inflexible body on the floor trying to reach all the tabs and screws. I wish I was young, small, and flexible. Anyway, thank you for the helpful video.
@@appliancepartspros Thanks! I have the Whirlpool GB2FHDXWS06 (with bottom freezer). My freezer is colder than it should be and the refrigerator is almost room temperature. Is the most likely issue with the control board?
You will need to check the frost pattern on the evaporator coils. You should have a light, even layer of frost on the coils when the compressor is running. If there is nothing on the coils, or only frost on part of the coils, then that would indicate a sealed system issue and will require a licensed technician. If the coils look good you will need to test the temperature sensors for resistance. If the sensors are good then that would indicate a bad control board.
This looks like my Amana 2008 I can't find defrost timer Is it in the upper light assembly? If so how do l get that open l don't see an entrance past the light cover
![Refrigerator Not Cooling - How to Fix - What to Check [2020]](http://i.ytimg.com/vi/ocOW2GYxdTE/mqdefault.jpg)
![Refrigerator Not Cooling - How to Fix - What to Check [2020]](/img/tr.png)
This is the only video I found that explained how to set up the new motor before installing. Since it looked nothing like the old one and didn't come with instructions we assumed we'd ordered the wrong part, but this video saved the day. Thank you!
Technician and cameraman were the best I’ve seen. Clear instructions. The best. Thank you
Thank you so much for going over how to assemble this motor. You cannot believe how much it helped.
You are welcome. Glad we were able to help you out. If there is anything we can help you with in the future please let us know.
Thank you for this excellent video with detailed steps on removing the drawer rails and removing the back panel!
Wonderful video, saved me 100's of dollars and it was fun to learn how to do.
Perfectly solved my problem. The information was well presented and the video was clear and showed the steps well. Thanks for posting this.
You are very welcome! Glad we were able to assist you. If there is anything we can help you with in the future please let us know.
Exceptional! Detailed, accurate, and well shot. Thank you very much.
These videos are the best. Just fixed my fridge. Thanks
Thanks, this helped me a lot. Broke some clips, but that is what I get for buying crap. The only thing that would have made this video better is how to test to make sure we are replacing the right thing.
awesome instructions slowly in details everyone could do it. excellent
This video saved my sanity.
Thank you for this excellent video, it was very helpful! The whole family is relieved that the fridge is working again.
I really appreciate this video, and your company!
Excellent instruction. You made a customer out of me!
Thanks for the video. It helped me fix my freezer blower fan...
You are very welcome!
Great Video!!! Thank you for posting. 👊💯
You're welcome!
Thanks for helping me save a tone of money!
Great detailed video. Helped me fix my fridge. Thank you!.
Absolute excellent video I completely appreciate it!!!
Excellent instructional video, exactly what I needed. Thank You!
I had to buy a replacement but it only has one ground wire. I’m so confused now. The video is exactly what I needed just don’t understand what I’m doing with the pasty’s a bit different. I ordered per the refrigerator model number. Thank you for the very detailed and easy to understand video.
If you ordered the evaporator motor it should have came with the other wires as well not just the ground wire. What is the model number of your refrigerator? Did you order this part through AppliancePartsPros.com?
@@appliancepartspros thank you so much for your response. It’s the wrong part…sigh. We had a professional diagnose it since further research shows it may be a leak. It’d cost more to fix it than it was really worth. I appreciate these videos as I try to educate myself, thank you so much.
Thank you very much great customer service to!!!!
Thank you, very good video! Got the fridge fixed!
Thank you so much. Fixed. God bless you
Question. we do not use the ice maker at all, can we leave it off???? This video has been a life saver for us and our marriage. thanks so much.
If you don't use the icemaker then you should be able to just leave it off.
Thanks you so so much!!!! I did it👍🏿👍🏿👍🏿👍🏿👍🏿
Thank you 🎉
You are welcome!
Hi, the fan motor is spinning (checked with cover off and can hear it), but no air is getting into fridge. Fridge is room temp, vents in the fridge look open to me. Should I still replace the motor?
If the fan motor is coming on then it's working, so it wouldn't need to be replaced. You will need to check the damper to make sure it's opening properly.
I wish they didn't make the freezer shelving and rails so difficult to remove! The hardest part for me is situating my large, old, inflexible body on the floor trying to reach all the tabs and screws. I wish I was young, small, and flexible. Anyway, thank you for the helpful video.
You're welcome! Let us know if you have any questions!
@@appliancepartspros Thanks! I have the Whirlpool GB2FHDXWS06 (with bottom freezer). My freezer is colder than it should be and the refrigerator is almost room temperature. Is the most likely issue with the control board?
You will need to check the frost pattern on the evaporator coils. You should have a light, even layer of frost on the coils when the compressor is running. If there is nothing on the coils, or only frost on part of the coils, then that would indicate a sealed system issue and will require a licensed technician. If the coils look good you will need to test the temperature sensors for resistance. If the sensors are good then that would indicate a bad control board.
This looks like my Amana 2008
I can't find defrost timer
Is it in the upper light assembly?
If so how do l get that open l don't see an entrance past the light cover
What if the component you're trying to replace is completely Frozen over?
Great job, but this is not a dyi job. You better call a professional to do this.
Not everyone can do this repair on their own. If you are not able to do the repair yourself, then you will need to contact a technician.
W we