Super73 RX custom e-bike kit 72v 5000w MT5E Magura Brakes rotors installed s2 r rsd Part 4

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 ธ.ค. 2024

ความคิดเห็น • 40

  • @MrCentralDriver
    @MrCentralDriver 2 ปีที่แล้ว +1

    sweet. Might go faster since your using a lighter super73 rear wheel. Wish I did the same

    • @atom0023
      @atom0023  2 ปีที่แล้ว +2

      Idk if it will go faster but I like the look of the S73 wheel better! You’re royalty on this channel lol I shouted you out in the first vid of the series. Thanks for inspiring the build and even answering all my questions!

  • @cyclingseasons
    @cyclingseasons 2 ปีที่แล้ว

    insane build! love the brake discs

    • @atom0023
      @atom0023  2 ปีที่แล้ว

      Thanks I recommend anyone to do this upgrade. Especially if you have 72v in mind for one day. It’s one less thing to do later.

  • @ashpunting
    @ashpunting 2 ปีที่แล้ว +1

    I think I would have gone for the single speed with that sort of power but this is your build 👌

    • @atom0023
      @atom0023  2 ปีที่แล้ว

      I just used what was available and it worked out because I had the 10 speed kit before. but pedaling will not be necessary lol

  • @super73uk
    @super73uk 2 ปีที่แล้ว

    Love it!

    • @atom0023
      @atom0023  2 ปีที่แล้ว

      Thanks!!

  • @ashpunting
    @ashpunting 2 ปีที่แล้ว

    that bike is going to fly like a rocket I'm sure you've seen mrcentraldriver then you already know my friend,your bike will really ride sweet i can't wait see your super72 dreams come true 😂👍🏾🙏

    • @atom0023
      @atom0023  2 ปีที่แล้ว +1

      yea I have seen his build and I’m ready to fly this rocket! The battery arrives tomorrow so it will finished in no time!

    • @ashpunting
      @ashpunting 2 ปีที่แล้ว

      @@atom0023 I'm getting excited for you and it's not even my ride 🤣🙏

    • @retro93277
      @retro93277 2 ปีที่แล้ว

      @@atom0023 what battery did you go with ? Do you have a link ?

    • @atom0023
      @atom0023  2 ปีที่แล้ว +1

      @@retro93277 the battery vid comes out Sunday! I’ll link it there and put a discount code

    • @retro93277
      @retro93277 2 ปีที่แล้ว

      @@atom0023 sweet !

  • @Shrimp003
    @Shrimp003 7 หลายเดือนก่อน

    What size spokes did you use for the 5000 watt hub ? A few of mines broke and custom ebike company does not reply to me

  • @brownbriansjeep9020
    @brownbriansjeep9020 2 ปีที่แล้ว

    Do you have to take the plates from both sides of the rear hub to a machine shop?

    • @atom0023
      @atom0023  2 ปีที่แล้ว

      One side only

  • @brownbriansjeep9020
    @brownbriansjeep9020 2 ปีที่แล้ว

    Do you have to machine both sides of the hub to clear the bigger spindles on the bigger engine

    • @atom0023
      @atom0023  2 ปีที่แล้ว +1

      Nope just one side

    • @brownbriansjeep9020
      @brownbriansjeep9020 2 ปีที่แล้ว

      @@atom0023 is it the side with the chain

    • @atom0023
      @atom0023  2 ปีที่แล้ว

      @@brownbriansjeep9020 yes, it’s the side with the chain. The other side it slides right in and locks with a screw doesn’t need adjustment

  • @brownbriansjeep9020
    @brownbriansjeep9020 2 ปีที่แล้ว

    Do you have to machine both sides of the rear hub for the mounting brackets

    • @atom0023
      @atom0023  2 ปีที่แล้ว

      just one side

  • @brownbriansjeep9020
    @brownbriansjeep9020 2 ปีที่แล้ว

    Do you have to make the rear plate bigger for both sides?

    • @atom0023
      @atom0023  2 ปีที่แล้ว

      just one side

  • @spxo
    @spxo 4 หลายเดือนก่อน

    Hey how did those tires hold up at higher speedS?

    • @atom0023
      @atom0023  4 หลายเดือนก่อน

      The huntsman vee were the worst quality tire. I shredded a few tires and had to switch back to the motor cycle tires.

  • @tinongnjong1305
    @tinongnjong1305 2 ปีที่แล้ว

    Hey man how were you able to make the brakes fit?.
    I have the same motor but my disk brake on the motor is way far off from the brake caliper

    • @atom0023
      @atom0023  2 ปีที่แล้ว

      Hey, I really didn’t do anything special. I left the spacer on that was there but that was only 1/8” or so. I ordered 190mm dropout are you sure you have the correct dropout for your bike?

    • @tinongnjong1305
      @tinongnjong1305 2 ปีที่แล้ว

      @@atom0023 I got my own wheel on Amazon last year and there was not an option for the dropouts, maybe that’s why 😭😭😭

    • @atom0023
      @atom0023  2 ปีที่แล้ว

      @@tinongnjong1305 yea that could be the problem :/ maybe sell the old motor and buy the one I linked

  • @dayuum5256
    @dayuum5256 ปีที่แล้ว

    Hi is the rear rack worth it in your opinion?

    • @atom0023
      @atom0023  ปีที่แล้ว

      I like the look of it. I like pulling my bike around by it when it’s off. I haven’t used it for hauling anything yet so can’t speak much on that. But sitting on it, I know it can hold way more weight than it’s rated but it may effect handling.

  • @brenthampton7025
    @brenthampton7025 2 ปีที่แล้ว

    Do u know if the kit is higo open or higo closed?

    • @atom0023
      @atom0023  2 ปีที่แล้ว +1

      Not sure

  • @s.fahad.s
    @s.fahad.s 2 ปีที่แล้ว

    With the magura brakes are they same as European spec mt4 and mt5 if so where could I get pads from my front is gone and rear is real low

    • @atom0023
      @atom0023  2 ปีที่แล้ว

      not sure

    • @s.fahad.s
      @s.fahad.s 2 ปีที่แล้ว

      @@atom0023 no problem

  • @sleepingbearffg5008
    @sleepingbearffg5008 2 ปีที่แล้ว

    Great build my brother.. I built my first ebike just awhile ago.. new sub. Check out my build 💪💪👊👊