I do the same, but I hate driving a tank through the woods and cant stand the stupid CVT. The only place my raptor wont go is a mud hole that you really need a boat to go through not a atv lol. Either way enjoy the ride and be safe!
Fullforce LTX yeah but i cant ride a raptor up a 60 degree sandy incline while dodging trees...yes im sure the raptor could get up there with a 60mph running start..but you will probably end up embedded into a tree..some things just NEED 4wd..i have a KTM 450SX ATV if i feel like an adrenalin rush
This guy must get bored a lot. He's gotta a 40,000$ truck, prob 10k plus in the atv, and like 250k house and dressed like Ricky Carmichael, but still loads his atv like a broke ass.
My first quad was an '87 Yamaha Warrior. After that was an '86 Suzuki Quadracer, an '87 Quadracer and an '89 Quadracer. I always loaded my quads just like that, of course, they were all around 400 lbs. Pretty easy.
This is IF your bed is wide enough to roll it in straight. Most people have narrower ones so you have to get the front wheels over the wells which makes this not doable by yourself.
Even though this does seem to work pretty well, I am sad to admit that this doesn’t work with all trucks because my dads old Tacoma is an example of how the hump caused by the wheels can cause loading difficulties when combined with the fact that the bed isn’t very large either.
if u dont have a tailgate extender, you can lift up the tailgate and put those cables over the closing hinges, so it is like half closed, thats what i always do...
How can I load a quad that has wheels too wide to fit in between the wheel wells? i can get it almost in myself but cant push the tires over the trucks wheel wells.
This guy shows how to load and load a quad on to a pickup. If you dont agree with that, then do it on your on way and stop writing crazy about him and his and his house and may be next time about his shoes and about his shorts.....oh wait a minute! I forgot something.....Why youre not comment his haircolor??? But as still as guys like you exists may he will stop to upload vids such like this....thanks for everything dude and dont worry about some infant guys writing down stupid comments!!
Cool video never seen it done that way, good to know especially if you come back from a ride and somebody made off with your ramps, thanks for the video.
Been doing this for years. He's such a hard as. Not hard to do with a 400 pound 4 wheeler I'm 120 lbs and I do this with my 70 xx Honda. It's 530 pounds.
I used to load my old lawn tractor that way , 1979 roper , 18 hp briggs twin cyl , 13 inch rear wheels , 3 point hitch , 3 speed trans with high and low range , had a 3 ft box blade with it , a 1 rox bottom plow , and had a 52 inch drive on deck , 4 blade , rear tires were apx 12 inches wide filled with water
Hey Mark, what was that sound @1:22? It sure sounded like a little poop.....lol, thats an easy bike to load, wish my pig was that easy, I dam near need a crane to load mine, phuckin tank....lol
at 1:05 if that was me I would just fall over top of it hahaaha...and also That does seems like a shorter bed because I have a Chevy S10 & I can fit my 250cc quad in the back and still close the tail gate..
Fantastic solution !!! Now I'm waiting for instructions nailing and a movie about the construction of a hammer. Interesting may be the movie "How to dig a hole in the ground," US is a great country with a huge very wise people. Now I know why Home Depot is doing training for their employees how to load a bag of concrete or garden soil on a pickup truck.
DO NOT TRY THIS IF YOUR QUAD HAS LINKAGE! Lol my linkage got hung up on the tail gate, now my tailgate is bent up pretty good. At about 1:25, you can see what I'm talking about. Of course if you can lift it all the way up without resting on the swingarm go right ahead.
fine when your fresh in the morning but after riding 8 hour i want you to do the same or if your alone and you hurt an arm wich you know is common then what???? nothing beats the aluminum folding ramps bro. keep on riding and hi from girona spain.
I knew this guy was skilled the second I saw his flip-flops.
Nathan Jones you sir are on the money
LOL!!!
looks simple now I need a Quad to try it
looks simple now I need a pickup truck to try it
looks simple now i need arms to try it
looks simple now I need ehmm... FML
looks simple now I need black clothes
@@chrisvandamme3738 💀tha was uncalled for.
GINGER POWERRRRRR!!!!!
Lol, I'm a ginger too
We have no soul...
@@Exempty 😳
@@julesp.5801 I forgot about this comment lmao
yeah i tried this with my can-am outlander x 1000..now i am a paraplegic..
I thought only paraplegics ride utility atvs anyways?
Fullforce LTX a racing quad wouldn't go where i go. i like to enjoy the nature and wildlife...not whizz by it going 90mph..
I do the same, but I hate driving a tank through the woods and cant stand the stupid CVT. The only place my raptor wont go is a mud hole that you really need a boat to go through not a atv lol. Either way enjoy the ride and be safe!
Fullforce LTX yeah but i cant ride a raptor up a 60 degree sandy incline while dodging trees...yes im sure the raptor could get up there with a 60mph running start..but you will probably end up embedded into a tree..some things just NEED 4wd..i have a KTM 450SX ATV if i feel like an adrenalin rush
on something close to a 60deg incline you will not have much if any traction from the front tires anyways.
1 year later quad for sale reason no longer ride back issues
That drop was so satisfying.
This guy must get bored a lot. He's gotta a 40,000$ truck, prob 10k plus in the atv, and like 250k house and dressed like Ricky Carmichael, but still loads his atv like a broke ass.
patched. we need an update
+xZoku kek
Lol tho
lol I'm dieing. thank you for the laugh
ukoz I found a new glitch for this! (Doesn't tell you just to be that one dick on your friends list)
My first quad was an '87 Yamaha Warrior. After that was an '86 Suzuki Quadracer, an '87 Quadracer and an '89 Quadracer. I always loaded my quads just like that, of course, they were all around 400 lbs. Pretty easy.
You made a instructional video on how to load a quad in a truck without ramps! Rides have been doing it this way for 30 years now
Brilliant! And there was me looking for ramps or a trailer with built in rear ramp. You just saved me a fortune! Cheers dude !
Flaxvert Steve C Exactly...I just decided not to go buy them today because of this video. markfreeman408 Thanks Man!
A fortune 🤣🤣🤣. I spent $50 on my aluminum ramps from marketplace
now everyone can steal a fourwheeler even fast now thanks
lock your tail gate...
Enzo why would they use your truck to steal your atv?
If everybody did it like that.....I would have no funny fail videos to watch now would I.
I did this with my 86 Honda Fourtrax 250 and I felt like I got hit by a truck the next day. Utility ATVs are PIGS but still awesome as all hell! XD
Ha ha that’s so great man!! Nice job
Big ole' strong ginger right there boy.
And next week we get to learn how to wipe our ass?
Stfu
hahahahahaha
lmao xD
Good job! I won't be trying that with my Can AM Outty Maxx though. I think that thing weighs 700lbs.
I want to see the blooper version of this easy Quad load! hehehe
This is IF your bed is wide enough to roll it in straight. Most people have narrower ones so you have to get the front wheels over the wells which makes this not doable by yourself.
It's pretty sad that a $50k "truck" can't fit a whole quad in the back with the tailgate closed
well its a shortbed soooo it would only make sense... plus you dont know if thats a 50k truck F-150's can start as low as 25K
icebox829 the ones that are 25k are reg cab long bed NA V6 trucks this looks like it has a v8 and its a crew cab so its probably upward of 40,
dave194315 but it is a short bed
icebox829
My short bed isn't that short. Must be a Chevy thing. Can fit my YFZ in the bed and close the tail gate, no problems.
Tboninator But thats a Ford
he did it again cus the other one got 3/4 of a million views
Damn the unload was what i didnt know I was here for.
😂
What shocks are those? They are really nice.
Looks like a "FOX" logo
Second gen Fox evol X shocks.
soulless flipflop rockstar ginger. i hope he got payed for this.
Even though this does seem to work pretty well, I am sad to admit that this doesn’t work with all trucks because my dads old Tacoma is an example of how the hump caused by the wheels can cause loading difficulties when combined with the fact that the bed isn’t very large either.
ramps are wonderful things
That's a great way to bend your rims
shut up
This bike is designed for jumps and rough terrain... if you bend a rim dropping it off a truck you must got some cheap rims lol
@@jacobroom5775 You dipshit. The only way you're gonna bend a rim like that is if you don't have any tires on them.
It’s a racing quad
People who no health insurance, don't try it.
+Mohamed Alkaabi lol
never thought of tipping it up like that. genius!
Now do that with a DS650 :D
absolutely the best video about this matter.
Love the pentagram on the window
if u dont have a tailgate extender, you can lift up the tailgate and put those cables over the closing hinges, so it is like half closed, thats what i always do...
In sandals too!
so glad I watched this first thing Im doin when I wake up is throwing my ramps away and then goin ridin
I never liked using ramps I was always afraid of slipping off, now this is how I load my ATV nice video
How can I load a quad that has wheels too wide to fit in between the wheel wells? i can get it almost in myself but cant push the tires over the trucks wheel wells.
If you showed me the quad and the truck and said "get it in and out in 2 minutes" I probably would have said "You're nuts."
This guy shows how to load and load a quad on to a pickup.
If you dont agree with that, then do it on your on way and stop writing crazy about him and his and his house and may be next time about his shoes and about his shorts.....oh wait a minute!
I forgot something.....Why youre not comment his haircolor???
But as still as guys like you exists may he will stop to upload vids such like this....thanks for everything dude and dont worry about some infant guys writing down stupid comments!!
I was doing that years ago with my Quadzilla I bet you guys don't even know what a Quadzilla is
Yamaha kodiak 700: “I’m boutta end this man’s arms”
😂 💪🏼
Cool video never seen it done that way, good to know especially if you come back from a ride and somebody made off with your ramps, thanks for the video.
Yellow beadlock rings and black nerfbars would look sick!
That drop is easy if you get some billstine suspension
Been doing this for years. He's such a hard as. Not hard to do with a 400 pound 4 wheeler I'm 120 lbs and I do this with my 70 xx Honda. It's 530 pounds.
I gave you a thumbs up, but remember (or learn...), it is really easy to damage your back. And once your back is damaged, it is damaged for life.
-
I used to load my old lawn tractor that way , 1979 roper , 18 hp briggs twin cyl , 13 inch rear wheels , 3 point hitch , 3 speed trans with high and low range , had a 3 ft box blade with it , a 1 rox bottom plow , and had a 52 inch drive on deck , 4 blade , rear tires were apx 12 inches wide filled with water
+Debbie Dude it also has a removable cab for the winter months
+Debbie Dude plus, I just installed tire chains on it.
Nice truck and wheeler!
2 Smile More stickers on the seat
hell yeah! a friendly competition!
THUMBS UP IF YOU THINK MARK FREEMAN 408 AWSOME.
When its in the bed of your truck you should still use tie downs since atv's are so heavy they can break the door if its an old truck or new
Thums Up If You Love Mark And Hes Amazing For Giving 1 Of Us A Free 4 Wheeler!!!
Looks insane.
lol Spencer thinks your sweet. Must be the flip flops!
Love the safety boots 😂
in flip flops like a boss
I do this with my Honda trx 700 and its a pain in the ass to do, mostly because the trx weighs 500lbs lol
I use to always do this with my 450r. I like it better than ramps
Wow! I like it! Will you help me load this on to the back of my Plymouth Neon?
In sandals...brave dude
thanks for the advice
Im going riding this weekend,will you come load our bikes? All 6 of them.
My way to get it out.
1. unstrap it
2. put it in neutral
3. drive the truck fast
u make that look really lite
Big swole in the house! How come always Ford's mark??
I have done this with my ATC200S many times!
WHAT A MAN, WHAT A MAN!!!!
Hey Mark, what was that sound @1:22? It sure sounded like a little poop.....lol, thats an easy bike to load, wish my pig was that easy, I dam near need a crane to load mine, phuckin tank....lol
That was so easy thanks for your video.
Made that look to dam easy
at 1:05 if that was me I would just fall over top of it hahaaha...and also That does seems like a shorter bed because I have a Chevy S10 & I can fit my 250cc quad in the back and still close the tail gate..
I guess the graphics on the quad, makes it wider?
We do this all the time with a Honda Rancher 450 into a lifted Toyota.
How do we do this is we don’t own a ATV?
Use a golf cart
Fantastic solution !!! Now I'm waiting for instructions nailing and a movie about the construction of a hammer. Interesting may be the movie "How to dig a hole in the ground," US is a great country with a huge very wise people. Now I know why Home Depot is doing training for their employees how to load a bag of concrete or garden soil on a pickup truck.
Yup... I'm sure your little sand covered country is just FULL of geniuses... hmmm?
Colonel Klink Yeah. You have right. Change your doctor.
Did anybody else have a mini heart attack when he dropped the quad
Why? Don't you know anything about quads?
great vid, no more carrying ramps!
Even enough but I'll stick to my ramps and save my back
My backs wrecked 😂
Is this the same for a fuel injected quad? Can't shut the gas off.
bobwatters Thanks man! This worked perfect, my truck is lifted so my ramp isn't very useful.
God dam red heads 🤘🏻
Good job good strong lad👆
I love this quad *-*
DO NOT TRY THIS IF YOUR QUAD HAS LINKAGE! Lol my linkage got hung up on the tail gate, now my tailgate is bent up pretty good. At about 1:25, you can see what I'm talking about. Of course if you can lift it all the way up without resting on the swingarm go right ahead.
quad is mint
If you have a heavy utility atv and no ramps, back the truck into a ditch or up next to a hill.
Under 408 club!
2:15 You killed poor thing last sound from it :)
thats a sexy quad
Do I need to buy a pair of mandles to do this properly?
DO THIS WITH POLARIS SPORTSMAAN!! HAHAAHHA
fine when your fresh in the morning but after riding 8 hour i want you to do the same or if your alone and you hurt an arm wich you know is common then what???? nothing beats the aluminum folding ramps bro. keep on riding and hi from girona spain.
are you going somewhere or did you just get your truck and fourwheeler out to do that
ginga power!!
I have! Tore the plastic off of the top of my tailgate lol
You have another video like this!
What brand is atv?
Sveti Nikola ktm
Cool!
👍 now try that with a ride on mower !