Kwikee Step Repair on a Class A Fleetwood Bounder
ฝัง
- เผยแพร่เมื่อ 18 ก.ย. 2019
- In today's video we are going to try and figure out what is wrong with our Kwikee Steps on the Fleetwood Bounder Class A. They are stuck in the almost closed position. They just stopped working and nothing will make them go in or out.
Kwikee Motor
amzn.to/2LC69BA ***
Kwikee Gear Box
amzn.to/2Oassjn ***
Kwikee Controller
amzn.to/2LDiOnD
Door Switch
amzn.to/30xiyi3
Equipment used in the making of this video.
Canon EOS 80D
amzn.to/32P4yOK ***
Camera Mount
amzn.to/2LYGhyV ***
Lighting
amzn.to/32KgNvO ***
Batteries
amzn.to/32LKzAc ***
If you like tattoos and permanent makeup check out our sister channel
/ agoodmansink
camping glamping rv towing anti sway bar rving - แนวปฏิบัติและการใช้ชีวิต
I watched until Bear tried touching his shop magnet to it (1:35), went out and poked my magnetic switch with my shop magnet, and the step extended after being dead for days. Now it works with the door as well. Thanks, Bear!
YUP- That worked---tape a magnet to the bottom of the door and its fixed...Never knew if there was a magnet there or not but after checking Amazon, they do sell both products along with the Magnet..But the magnet I have works fine..Just the right size..I'll use some kind of command strip to attach it later..
Thanks for sharing. It was very helpful.
Thanks for making this video to help all the rest of us RVers
Have identical problem. Your great video illustrated what I needed to do. Another thread mentioned that sometimes the motor binds and the motor needs to be un-mounted and re-mounted. I think that was your problem when you pulled out one bolt and it started working. I loosened the three motor mounting bolts, closed and opened door, steps worked, tightened three bolts, washed hands. Your video was very helpful to me.
Glad it helped
👊🏼👊🏼👊🏼👊🏼👍🏼✌🏽Thanks for this very informative video.
No problem 👍
Mine is working fine. But I wanted to watch this video to see how the steps actually work. Thanks, I now know all I need to know about the function and parts of the steps. Having seen that light underneath, I got another idea. I’m going to put an LED strip under each of the steps powered by that light. That should make it much easier to traverse the steps at night. If anyone else wants to do what I’m going to do, I would recommend carefully choosing a path For the wiring so that it doesn’t get bound or pinched in the mechanism.
Good Vid! Thanks.
Thanks for watching!
Great video. I had nearly the same thing happen. I got all three screws out but I decided to try power to it when it was disconnected from the gear box and it magically started working again. Reinstalled and everything is working. No parts needed.
I had the same problem.
Unplugging the power to the steps resets the control & the steps start working again.
In the spring I made sure that I lube/spray oil on all the parts. It was working fine until it was stuck in the out position. Reading/ watching what you did and finally someone brought up the magnet trick. I tried that and it work. I did notice a sticky tape on the bottom of the screen door. I wonder if there was supposed to be some type of magnet there. I found a little square magnet(1") on the fridge which holds our grandkids pictures and used black duck tape and taped it to the bottom of the door. Everything works now.. Thanks....
Check motor voltage first before hitting it with your wrench, also ground on frame can get rusty and light will go out with motor
A good ground can fix a lot of things
my steps just quit working, I have a clue what to do. Thanks
Good vid. I have a Thor Hurricane 2016 29M with a step that won't retract....not even when you start the engine. Tomorrow I'll pull the little 2 wire connector and underrstand that I should get 11 - 12 something voltage. Not sure what you did with the 4 prong connectore to see if power got to there. My light is lit. Any help?
We have a 2019 Bounder and I have had to work on the step motor several times over the last year. The issue that I have found is that if you get in a hurry and come down the stairs before it is fully down, you will jam up the mechanism and it will not open or close. The 90 degree arm goes past center and then the electrical motor cannot power it back. By taking out the bolts or even loosening them it takes the pressure off of the gears and then the motor can engage. The other issue I had was a small traffic cone was sitting in our lane on a busy two lane road and I couldn't avoid it. It was thrown up into the bottom of the step by the front tire and it jammed the gears up. I had to loosen the 3 mounting bolts and it once again started working. This can be resolved by adjusting the rubber stops so the step cannot extend up with pressure, but it will not resolve the issue with putting pressure on the step before it is fully down and locked. For this I need to train my family to wait another couple of seconds :)
I think I may have the same or similar problem steps were working and then an hour later nothing even when starting the engine,...I will try what you did "hooking and un hooking the power line harness. Thanks I will let you know it it worked
While it did work for a few more weeks, I did eventually replace the motor. So keep that in mind. Once the motor was replaces there were no more problems.
@@BearsWorkshop I will plan on replacing the motor asap .Checked 4prong harness and the step light came on. Gave me hope.
So right on design. Sometimes gear strip. Turn gears 180. Good for a while.
Also enclose the step components. All exposed. I live in NorthEast weather destroys everything.
When mine gets "sleepy", I can wave a 3x3inch magnate next to sensor on door and it comes alive, steps work properly👍 and magnate goes with me on the road!
Good idea.
PS a magnate can (get you out of a pinch, or get you home) but needing one can be a signal, calling for inspection and maintenance!
GREAT VIDEO THANKS FOR MAKING IT. My RV steps work but motor continues to run several seconds after it opens or closes making a banging noise, any suggestions how to fix it?
My 09 Tioga SL steps just started making a ratcheting noise when the steps go all the way in. It does this for 1 or 2 seconds and then stops. Thank You
As flakey as these steps are on every RV, I would like to see a simple mechanical lever or crank to operate the steps. Constant pain! Don't tell me that all RV's are just naturally junk. Something like this is very fixable if someone wanted to spend the effort to redesign a reliable set of stairs.
What if the motor runs and you need to assist the lifting with your foot? Is there a gear box thar may need replacing?😊
Can save you some time for the next time it quits. Wires corrode at the plug in. Apply some dielectric grease to the plug and also the plug at the motor
Hi Bear, thanks for your videos. The retractable steps on my 2008 National Pacifica 40E Diesel Pusher just stopped working. I went over to where I store it, opened the door and I started to hear a Pop, Pop, Pop which is the motor running. However the steps won't go up or down. The steps are not bound up either. The steps are loose and will swing up and down as I push on them. Any ideas?
Seems like the pin or the gear is broken. it's on the end of the motor.
I wonder if you reset the control by removing and then replacing the power.
It is possible but the motor did finally fail after a couple of days so we replaced it.
I tapped the motor with a hammer. Steps working again.
Do you know where the fuse for this is, I am having the issue where there is no power getting to it?
I hear a clicking when my chassis battery is weak does it need full 12volts
This replacement motor won't work on my old (1997) Kwikee 32 series step, I don't have that oval connector.
should the light stay on all the time. It comes on when I replug the harness but goes off
You look like David Duchovny :D
Do you gave an updated link for the controller? My steps have power and they click when you open/close the door or out a magnetic next to the door switch but do not move. The motor is very warm to the touch but nothing moves. Any suggestions or way to tell if it is the controller vs the motor? Thank you!
9 times of ten its the motor.
@@BearsWorkshop Thanks!! Will be ordering a motor tonight!
Mine works when connected to 12volts but ,but not when connected to the steps
Ware is the switch I can't find it on my 1999 Fleetwood bounder
You sure it wasn't the ear ring???? Looks like an 80's MTV video. Wake Me Up Before You Go Go!!! Wham.
Mine will not retract when opening and closing the door. They will however retract when the ignition switch is turned on. Problem???
Problem is with the switch on the door frame or the magnet in the door. That is what triggers it when the door opens. Try this. amzn.to/30xiyi3
Mine is making a clicking noise, down or up, they move a little then sit still and click until i help it with my hand.
Probably motor.
@@BearsWorkshop or gearbox
When you hear the click, I thought that the motor likely is not the problem. He didn’t listen for it. The sound is very faint. I’ve used lubricant and cleaned the steps from underneath to get them working. I’m going to check for a loose wire. Mine go long periods of working fine then stop.
If your battery is low, it won’t work. Should mention that first.
Steps retract part way and then all it does is click. If I pushed the steps in all the way by hand , it will not stay in place and continues to click
Seems like the motor under the steps need replaced.
Oh great they used 10mm bolts knowing that everyone that has a tool kit that 10mm is missing
Yeah we just bought a 1945. Drivable RV so I don’t know it’s really nice sorry don’t work the air conditioner at work and the Stairs