How to Replace Front Wheel Bearing 2004-2008 Acura TL

Buy Now!
New Wheel Bearing from 1AAuto.com 1aau.to/ia/1ASH...
New Wheel Bearing Set from 1AAuto.com 1aau.to/ia/1ASH...
This video shows you how to install a wheel hub and bearing on your 2004-2008 Acura TL. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This repair was done on a 2006 Acura TL Base 3.2L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2004 Acura TL
2005 Acura TL
2006 Acura TL
2007 Acura TL
2008 Acura TL
Tools you will need:
• Impact Screwdriver 1aau.to/o3/1AXA...
• Phillips Head Screwdriver 1aau.to/oKY/1AX...
• Pry Bar 1aau.to/oke/1AX...
• 10mm Wrench 1aau.to/okW/1AX...
• 17mm Wrench 1aau.to/okW/1AX...
• 10mm Socket 1aau.to/oE8/1AX...
• 14mm Socket 1aau.to/oKc/1AX...
• 19mm Socket
• 36mm Socket 1aau.to/oL/1AAS...
• Blowtorch
• Brake Caliper Hanger 1aau.to/obY/1AX...
• Press
• Circlip Pliers
• Side Cutters
• 3/8 Inch Impact Gun
• Air Chisel
• Ratchet 1aau.to/oNH/1AX...
• Torque Wrench 1aau.to/ow9/1AX...
• Cotter Pin
• sanding disc
• Center Punch 1aau.to/ocv/1AX...
• Hammer
Subscribe: / @trq
Check out our playlist:
Acura TL 2004-2008 3rd Generation: • Acura TL 2004-2008 3rd...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@jarrettsharp1066]

I watch the video and was realy surprised how good the video was. Out side not having the press. I feel any one could do this. Thank youuu

[@bobbyross2552]

Im glad I watched this video before attempting to do this myself

[@Tech9641]

One of the best videos on how to do it.

[@johnmanning6572]

I'd say that was the best, most comprehensive tutorial I have seen, obviously performed by an experienced, skilled mechanic. I guess I missed the section on tightening the axle nut to the specified torque, but I guess it goes without saying.

[@jhwardius]

Just did this on my 2004. I bought a hub with the wheel bearing already in it from rock auto, it ended up being a lot easier than it looks in this video

[@zellous2928]

thanks bro, this video is great, bout to go do it on my rsx

[@Sk8money562]

No u aint

[@maximobautista4854]

Thanks. Question why did you disconnect the battery?

[@rthinds]

Acuras have the ABS/speed sensor on the axle shaft.

[@nateoliver3285]

Wait, do you have to put the wheel bearing race back on? I have a new hub and bearing and it didn't come with one - do I have to take off the one in my car and put it on the new hub?

[@JohnDoe-kl8cd]

Are those ball joints worn to the point they should be replaced? They look a bit flat out is that normal?

[@qualidybeats2953]

Im just trying to remove the wheel hub and replace it with another wheel hub. Does the whole suspension assembly have to be removed?

[@marcelofountas8561]

What rotor are you using to press the hub out of the spindle

[@Blaze7777]

what rotor are you using to push the hub through on the press?

[@CristinaDelsocorro]

Wow that was so perfect Thank’s

[@omarcastro8970]

Do you need an alignment after this?

[@Tech9641]

How much did this repair cost you

[@Tech9641]

How much does this repair cost for the passenger side?

[@karna6337]

Good stuff