How Does a Plasterer Sand a Ceiling with Makita Drywall Sander & Vacuum
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- Sanding plasterboard ceiling using my Makita 18v drywall sander and Makita Vacuum. Once sanded we can prepare for cornice as shown in the next video.
#makita #drywall #cornice
These are the work videos I like to see. Drywall finishing is your specialty sir.
Worth the money
Thought you might run a light on the corners and joints
Wow amazzing
Can you use sander to remove waterproofing membrane that were from gyprock ceiling
What sanding mesh do you use for final sand of the ceiling top coat, 150, 180, 220? Do you always do it using the tool at angle? What about on higher ceilings?
At the top, cornice will be installed
I’d love the try n compare Makita to my Festool sander
Makita хорошая,но Festool вне конкуренции.
С уважением, Саняб)
No comparison, festool wins by a long shot
How is the dust extraction with the battery hoover? I've tried my makita on a few different hoovers and nun of them seemed to work that great... think it's a design fault.
👍👍
Hows the sinat top to sand . I can’t get csr on current job it’s all that was available. Cornice just upside down back the front for me
Been using it since the change,the all purpose is great,normal topping not so much..
Too confusing for my simple brain
How come there's no screws on wall panels?
It gets stud adhesive
@@Maxkil what type of adhesive is it and how does it keep the drywall back paper from tearing off?
good video. It would also be good to know what grit sandpaper is used?
180 is ideal, this sander i have found it doesnt work well with other sanding pads, only the sandpaper types, not mesh.. maybe its just the way i have it set up.
Doesn’t look like it sanded the edges
Hm he marks his tape metric isn't always best.
I'm messing around
So your tape and spackling with water soluble joint compound.. ...no actual plaster products being used.. unfortunately you weren't sanding plaster because In reality genuine plaster is too hard to sand... It's really disappointing to hear the new generation not understanding the difference between plaster products and cheap tape and spackling joint compound..
You are willing. There is many types of plaster, such as plaster of Paris, dental plaster etc. . all made by the same companies too here in Australia. What we don't call it is "spackle"
Everything is water soluble even concrete. The trade here is called Drywall Plastering. If it's outside and using cement based products, the call it a renderer of solid plasterer. And now I will share with you from Wikipedia...
Plaster is a building material used for the protective or decorative coating of walls and ceilings and for moulding and casting decorative elements. In English, "plaster" usually means a material used for the interiors of buildings, while "render" commonly refers to external applications.
Wikipedia
@@Maxkil gotcha..it's an Aussie thing..and a new world generation thing.. in America plaster is completely separate from drywall finishing.. and our plasters are not water soluble.nor sandable.... I didn't realize the difference between the two countries... thank you for the insight..
@lanceladue2818 no worries man, normally English folks say the same thing as you and they tell me all the time. 😅