Thanks for the tutorial man! I did have a question - for me, I'm noticing that the transform zooming in effect doesn't quite seem to be working for me, nor does the rotation 🤔Anything that might be good to check out? Update: nvm - I had the cross all the way up to 1 which is why nothing seemed to be happening 😅
I've been trying to work at 720x1280, which actually seems to come back as 704 x 1280, no big deal. But once in a while, when I start recording with the MovieFileOut, the resolution randomly changes to 320x640. Haven't been able to track down what's causing it, but there's definitely some strangeness with the resolution.
@@aaronc.1362 The max resolution with img 2 img on is apparently 768 X 768. You can use a Fit TOP to resize your input. When img 2 img is turned on it uses the resolution of the input instead of the resolution you specified on the computerender component
Hello Torin! This is fantastic, thank you for the clear tutorial! - when I use the transform/scaling feature my image starts to degrade. Is there a viable workaround to keep the images at a consistent res through the animation?
Thanks for your tutorial! how far do you think we can do this real time, with low request cost and not neccesarily expensive harrware need it thank you
when i generate images , every iterations is super different , either i put the strenght super low and i only get one frame , like at 0.01 or if it is around 0.1 it just changes image every time , i cant seem to make slight changes to images any ideas on solutions?
When I try to use a seed from an image from Lexica, I often get an error. Happens when the seed is very high. I guess the seed can't exceed a certain number. Any workaround?
Check out @dotsimulate's setup. He has a local setup you can use. I wanted to make sure this was accessible to the most number of people so I went with an API
thank you very much for sharing this project, I tried to generate images and everything worked correctly until yesterday. Despite I added credits on computerender, since today, when I generate an image I get an error back “ {”status“: ‘error’, ‘message’: ‘Could not find \’complete\” state within timeout. You may try again.", ‘errorType’: ‘INTERNAL_ERROR’, ‘jobId’: ‘60f87997ecc64cba35e185a74ed0a4498c1b89e5’} ‘ ’, could you tell me how to fix it? thank you very much, i love your channel!
Thanks! At the moment the plugin uses an API, so you don't need to have a fancy GPU to run it and it'll run on Mac + PC. It'll generate the images at around ~3fs. The API is running the model mainly on RTX 3090s, so it's not quite there for real-time yet unless you kept the resolution really low, or the iterations low. I'm not sure how fast the model runs on a 4090 though. I'm sure in the near future there'll be some optimizations that'll bring things closer to real-time.
Hello, Im running a 2021 version of Touchdesigner that is paid for, cant afford the update as yet.. having lots of errors running the program on this version, is there a workaround I wonder?
Incredible work and fantastic tutorial - thanks so much for sharing!
This is so exciting, can't wait to try it tomorrow. I am sure it will be super fun, thanks!
you're the greatest man for this
i literally can not express how much i needed this tutoria.. thank you soo much!!!!!
Super cool technique.
For sure looking forward to trying it out.
great tutorial, thanxx!
Incredible, thanks for sharing!
Added my own API key but doesn't seem to be working. Am I missing anything?
Amazing stuff mate! Thanks for building such awesome comps
boom cheers for the inspiration
Hey Torin, amazing tutorial! Can this be run on local stable diffusion? So there is no need to go through computerender?
Thanks for the tutorial man! I did have a question - for me, I'm noticing that the transform zooming in effect doesn't quite seem to be working for me, nor does the rotation 🤔Anything that might be good to check out?
Update: nvm - I had the cross all the way up to 1 which is why nothing seemed to be happening 😅
I've been trying to work at 720x1280, which actually seems to come back as 704 x 1280, no big deal. But once in a while, when I start recording with the MovieFileOut, the resolution randomly changes to 320x640. Haven't been able to track down what's causing it, but there's definitely some strangeness with the resolution.
The size auto rounds to the nearest power of 2. When you're using img to img it only looks at the resolution of your video
@@blankensmithing So how to fix this, i faced the same problem and the resolution is unuseable.
@@aaronc.1362 The max resolution with img 2 img on is apparently 768 X 768. You can use a Fit TOP to resize your input. When img 2 img is turned on it uses the resolution of the input instead of the resolution you specified on the computerender component
Hello Torin! This is fantastic, thank you for the clear tutorial! - when I use the transform/scaling feature my image starts to degrade. Is there a viable workaround to keep the images at a consistent res through the animation?
Hey make sure the seed is changing every time
Thanks for your tutorial! how far do you think we can do this real time, with low request cost and not neccesarily expensive harrware need it
thank you
when i generate images , every iterations is super different , either i put the strenght super low and i only get one frame , like at 0.01 or if it is around 0.1 it just changes image every time , i cant seem to make slight changes to images any ideas on solutions?
When I try to use a seed from an image from Lexica, I often get an error. Happens when the seed is very high. I guess the seed can't exceed a certain number. Any workaround?
Very nice tutorial. Much appreciated!
Do you know why sometimes it takes very long for the computerender to push out images?
thanks! I'm assuming this video brought a lot more active usage happening at the same time. In general I've found it to be very responsive :)
@@blankensmithing Thanks for your reply. Works better now!
Hey man! Great video! Would be amazing if you could give some info into how to adapt this setup for running Stable Diffusion locally
Check out @dotsimulate's setup. He has a local setup you can use. I wanted to make sure this was accessible to the most number of people so I went with an API
whose paintings are those?
thank you very much for sharing this project, I tried to generate images and everything worked correctly until yesterday. Despite I added credits on computerender, since today, when I generate an image I get an error back “ {”status“: ‘error’, ‘message’: ‘Could not find \’complete\” state within timeout. You may try again.", ‘errorType’: ‘INTERNAL_ERROR’, ‘jobId’: ‘60f87997ecc64cba35e185a74ed0a4498c1b89e5’} ‘ ’, could you tell me how to fix it?
thank you very much, i love your channel!
I've the very same problem. It worked correctly until few hours ago...
Beautiful, thank you Torin! Is this kind of Audio Reactive Animation possible even in real time, say for a live event while playing a midi device?
Thanks! At the moment the plugin uses an API, so you don't need to have a fancy GPU to run it and it'll run on Mac + PC. It'll generate the images at around ~3fs. The API is running the model mainly on RTX 3090s, so it's not quite there for real-time yet unless you kept the resolution really low, or the iterations low. I'm not sure how fast the model runs on a 4090 though.
I'm sure in the near future there'll be some optimizations that'll bring things closer to real-time.
@@blankensmithing great to hear, thank you again Torin.
Great tutorial format and explaination ! I think the vidéo deserves to be a bit shorter in lenght but overall it's great !
Error: (Parameter: Experimental) AttributeError: 'td. App' object has no attribute 'experimental'
(/project1/computerender/docsHelper)
Hello, Im running a 2021 version of Touchdesigner that is paid for, cant afford the update as yet.. having lots of errors running the program on this version, is there a workaround I wonder?
i’ve only tested this on newer versions of TD
@@blankensmithing Hey can u plzz give the link for that version?