small little box turned from ash wood
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- here is a demonstration on how to turn a small lid ash box.Here is a link to my new web blog site i hope to up date with more photo robbiethewoodtu...
here is the link to the wood turner that showed me how to turn this box benoitaverly.co...
This video was produced and made by Robbie power Copyright © All Rights Reserved - แนวปฏิบัติและการใช้ชีวิต
Small in the size but so big in the art. Very nice your job. Congratulations Sir !
No equal to experience. You obviously have some, and thanks for generously sharing it with us cyber-scavengers. Charming little box. But the way you saved it and making the jamb chucks was even better.
I don't want to say that I am glad that you needed to fix a " mistake" but what a valuable lesson. Thanks so much for your videos.
thanks David it all part of the learning curve we all might need to learn how to fix our mistake
Wonderful job Robbie. Thank you for leaving the repair in, it helps everybody. I've just used a different piece of wood so it looked like I did it on purpose lol
Take care, Carl
thanks Carl i normally just burn them lol
take care Robbie
Very nice box! I have repaired a bowl that way but it was nice to see a professional do it . I subscribed
It's really great to see a video with a bit of a problem but then a solution comes out of it and all is right. Many thanks for posting and showing us beginners that it can happen to anyone...
Watched your video for the first time. You are absolutely amazing, love the work and the fact that you continued on. I learned a lot just from the one video. I have now subscribed to your channel. 🇬🇧
Robbie -- Anybody that hasn't gone through a bottom or two hasn't been doing much turning. Nice recovery, my friend!
thanks Gerald
take care,Robbie
I've been turning for 12 years and I learned something today. Thank You.
I have heard the saying the mark of a true craftsmen is not the work they do but how well they can fix there mistakes. That's what I seen in this video. You are a true craftsmen Robbie. Thanks for your time and knowledge. It does not go unappreciated. Looking forward to seeing your next video.
I only started turning in 2020 at the age of 65. Love your videos which have helped and given me the confidence to turn and enjoy the process regardless of mishaps. As you say it's only wood and better than throwing on the fire. Thanks Robbie.
Robbie that was an Official Field Engineering Design Change.
Nice save on the little guy.
I haven't cut through the bottom of one yet because I am to scared to get that thin.
You taught me the box and a great method of repair. All kinds of good stuff.
Then the lid finish at the end. Bravo!
that's what its all about sharing the craft with outers
thanks Dave
maybe because im irish.i find you very easy to understand your way of explaining things.realy like your videos.
I first watched this video when it was published almost three years ago when I first got the turning bug with my first lathe. Now, after watching probably every turning video and channel on TH-cam , I think its safe to say that Robbie has to be one of the finest turners out there. As we come to the end of another year Robbie, I would like to wish you every health and happiness for the new year. I raise my glass to a master...
Robbie amasing how you fix it that makes the real craftsman, i learned much from you thank you very very much.
What a save Robbie, simple box turns into a Master Class by a true Master.
Wonderful
Regards ........ Geof
My hat off to you sir for continuing to turn even though whatever it is that causes your hands to shake like that must be an easy enough reason/excuse to stop. Also, for showing that we all make mistakes. Another thumbs up. :)
A wonderful lesson in practical woodturning, with the added bonus of how to get out of a jam.... a great box rescue.... Many Thanks for sharing.
Hi Robbie, thank you very much for your video. For those who are starting in the woodturning , it is often difficult when you make a mistake and we observe that experienced people, like you, also make their mistakes. Congratulations for showing us how to get around adversity. I would like to thank you for your guidance, even showing the things that don't work out, because that's typical of big people, of people who don't have their vanity registered. I wish you success and a big hug from Brazil and stay with God.
You do such beautiful work! I'm a new turner and have learned so much from you. Thank you for sharing your knowledge and skill!!!
Nice repair job Robbie, learned a lot.
William Donnelly Thanks for watching William
Great job Robbie! A great recevery from an over zealous bit of parting off. Good of you to show mistakes and how to recover from them. It's a lovely little box. You've inspired me to make one!
Great looking little box Robbie. Thanks for showing the save. Recently turned my first box and it suffered the same fate, but without the save. Thanks for sharing. Fred
Great little vid R, proves we don't have to make anything world-changing every time we turn.
A neat rescue job there Robbie and still a lovely little box! thanks for sharing
Great job, great rescue and great accent. Thanks Robbie.
Thanks for another great instructional demo Robbie, has a very very new woodturner I appreciate you more experienced turners sharing your wisdom keep up the great work once again thanks Harry.
thanks Harry glad you gained something from this video
Excellent video Robbie. Many good lessons in this one. Thanks for posting.
A nice job, really liked the way the box was rescued, a lot to learn.
That's a nice little box. I liked the way you did the repair, that was very informative, I learned a great deal from watching it.
Regards,
Bob
tanks bob that's what its all about sharing the craft
Loved that video Robbie it just goes to show that instead of getting annoyed with it and your self you showed all the newbies that's it can be fixed and if you didn't tell anyone they won't know and it's a great little box keep up the great vids
Cheers
Robert
Excellant job again Robbie, I have thrown away many, many projects with holes through the bottom!!!. I will now try out your repair. Thanks for all your help and advice.
Chris.
well Chris i normal throw them away as well lol
thanks robbie
Great job Robbie. Glad to watch how someone else approaches the too often problem I have also.
The repair part was as good as making the box . I have two small bowls that i went through the bottom of , So i figured i would put a piece of would back in the bottom and save them I was"nt sure on how to go about it. Thanks to your repair part of the video I have a way to repair them. They were nice pieces of spalted birch. I was kicking my self for going through the bottom. Now i know they are repairable. Thanks for leaving that repair part in.
This video is awesome for several reasons.
Great little project. Really enjoyed seeing how you repair a problem with the bottom.
thanks for watching louie
Nice fit little project. Thanks for sharing
Robbie, this is an amazing demonstration of detail work, thank you very much for sharing with us.
Kind regards.
thank you Miguel
Miguel Sanchez q
Thanks for that Robbie You had me sitting on the edge of my seat and holding my breath as you re did the bottom. Its good to see the experts sometimes have a stuff up. Cause I have lots.
thanks for watching Allan i have lodes of stuff ups like everyone
Very nice. Got to learn a bit more than I expected. Now I will give it a try minus the bottom problem I hope. If I do blow through the bottom I will get to do a repair!
great job, nice to see others make mistakes but good to see you kept going with it and useful tips how you repaired it and the use of jam chucks.
That's brilliant, fantastic repair.
Love your Box! Nice work man!🤙🏻
Beautiful Robbie, you have an eye for shape. Thank you.
Amazing Robbie is all I can say. Your work is incredible.
Nice job Robbie. I do a fare few saves. It adds character and you don’t feel so disheartened when you know there is a way so save a piece.
Many thanks take care.
David
thanks for watching Dave glad you enjoyed the video
Wonderful project Robbie, and a great save mate. I love making the little boxes, they are always very popular with the ladies!
Take care
Mike
thanks mike not so popular whit the wife you can only give so many then she throws them at you lol
Robbiethewoodturner Lol...I know exactly what you mean mate.....I have the very same problem ;)
What a lovely little box and a great save! Looking forward to seeing more great videos
Nice recovery Robbie great video
thanks for watching Harry
This was a nice "little" skill building project. I did it out of a small piece of maple I picked up in the woods. It turned out great and the jam chuck experience was helpful.
Nice job and repair Robbie. Very good video. The piece turned out beautifully
thanks Stephen glad you enjoyed the video
take care,Robbie
Many thanks Robbie for a great video. The making of the jam chucks was especially helpful as sometimes I get a little impatient when I should be making them but I can now see their true value.
Looking forward to your next video.
Best wishes,
Alan.
tanks Alan its the old way before the chuck came along making jam chuck was the only way
Many thanks Robbie learnt a few useful tricks here top man, knew Mike Waldt and Carl Jacobson had good taste in turners to watch ;)
Miller's Of Sedgemoor Thanks glad you enjoy my work
Really good job robbie I was peeking through my fingers as you were turning the bottom haha amazing come bk learnt a lot especially as I am a new woodturner take care x
it can happen to anyone Elisha so i just showed how to fix the problem
Robbie
great job as ever Robbie very well done mate
thanks Paul
take care Robbie
thanks Robbie, for teaching all of us something new and different, t.s.
This has to be one of the very best turning videos on here. You had me holding my breath a few times.
Best Wishes, Brendan.
thanks Brendan I had a job keeping my hands steadies
I don't know why, but I thought of Clementine. Reviewing the lyrics it hadn't been little boxes, but herring boxes, oh, I'm getting old, memory's fading...
Nice rescue of your little "bottomless" box. As you said, the ladies love these boxes, for us it's better they get a bottom, otherwise it'll cost a fortune to fill it with the neat little presents for Valentine's Day.
Thank you for sharing your mistakes, I'd rather call them mishaps, and the fixtures. I think, I do learn the most out of my mistakes, and I am always glad to see other people's mistakes, as they save my wood and leave more room for my own ones. (Forcing one of these little boxes onto a slight tapered and therefor too big jam chuck, the box ended up exploding on me, as soon as I tried to finish the base).
Another great (little) project also for us turners with low end equipment like me.
Thank you Robbie for sharing.
Greetings from Good Old Germany
Peter
thanks peter i gave it to the wife no gold in it
its on the pile with the outer 200 she has lol
we all try to achive perfection, and you just show to us how dificult it can be, we are all dommed, what a big hole. Great video thx
good save, great job, love your work.
thank you for all your videos Robbie. I tend to watch them several times. I have just recently gotten back into turning and i have learned a lot from watching you.
thanks johny glad you enjoy my videos
Robbie
Published on Jan 24, 2014
here is a demonstration on how to turn a small lid ash box.Here is a link to my new web blog site i hope to up date with more photo robbiethewoodturner.net
here is the link to the wood turner that showed me how to turn this box benoitaverly.com/home/
Great job Robbie.
mike atkinson thanks mike
excellent video Robbie fantastic work and thank you for the repair idea i have tossed a few projects away cos i have done that not anymore thank you again
Thanks Ben glad you enjoyed the video
All the best,Robbie
Nice work man you are the master craftman tankyou for giving yours videos.
Hi Robbie, I’ve watched all your videos and have learned a great deal from your work.. You inspired me in my early days and Im sure I’m not the only amateur turner out there that loved the way you explained each part and process of particular project, a true teacher that connected with the camera like no other. You haven’t posted anything for a while now, are you okay? Can anyone shed any light on Robbie? My best wishes. Craig.
First time I've seen your videos. Great job; enjoyed it.
Great recovery!! Thanks Robbie
To err is human - or so they say! But nicely repaired in the end. Thank you for sharing it with us. Best wishes.
glad you enjoyed the video Alan
take care,Robbie
A beautiful box, Robbie! A very nice repair job, too! :)
Wayne Hodges
Thanks Wayne
All the best Robbie
Cracking job mate really nice & well saved great
Thanks Gary
All the best,Robbie
It's a very pretty box. I like very much.
Inspirational as always Robbie! Thanks!
thanks for watching ,Tom
Yes, I did subscribe, to see more mistakes! Ha! A real master craftsman knows how to fix his mistakes and still make it look right. Yours came out awesome! Looking forward to seeing more. Oh , and Happy Healthy New Year to you sir!
billfromelma Thank you Bill
excellent video ......learned a lot thanx robbie
It's good to know you can actually repair, I never thought of that. I haven't got my chuck yet.....
Nice little box love it.
Es usted un artista!!
Nice work. I will try it and see how the ladies react.
Greetings from the Netherlands.
thanks for watching Bert hope it turns out all right for you
Most excellent Robbie. just a little bigger and it could be used as a tobacco box. make it like two frisbees put together maybe 6 inches around. Ya, I will buy one from you . from Michigan USA. 8/14/2021 11:43 PM. sending love to you God Bless
Ola Sr Robbie eu sou Carlos do Brasil e quero dizer que sou fa de seus trabalhos vejo todos seus videos e quero parabeniza-lo pelo belo trabalho que o Sr faz um abraço e ate mais.
Good design. Ever happened to me to break the back glass I was doing. But in my case I could paste the same piece that had broken after pasted was also noticeable. Congratulations on your recovery.
hug
Eduardo
thanks for the complement Eduardo
take care Robbie
great video pleasure to watch..
Derek Smith Thank you Derek
thanks Robbie, Great job
Very cute. Elegant
Cute box!
呂踢那 Thanks
It happens to the best of them. There 2 kinds of turners those that have and those that will make a tunnel. I have already. Good recovery my friend.
Cheers mate
Thanks Marc
Lovely little box Robbie and great to see how you rescued it. Like the joke about subscribing to see more mistakes as well lol
thanks Chas its all about learning
nice small bowl!
wonderful job robbie, how you know ways to spare sommething realy amasing
Hey Robbie:
Do you know that this way of making a box never occurred to me before seeing this? Another one to stash away!!
Thanks!
And a very nice recovery job as well!
Larry
thanks Larry this type of lid can be used on a lot of different type of projects
good job Robbiethe
That was really Great!!
thanks Dan
Robbie absolutely riveted watching that save , love the way your videos are made I feel like I'm sat in your shed with you loved it
Great video!!!!
thanks
here is a demonstration on how to turn a small lid ash box
I hope it isn't offensive for me asking, but what causes your hands to shake? What is it called and does it cause you any issues in turning? Your work is amazingly good and helpful to guys like me who are just getting into the hobby
Fun to watch!
Very nice! Love the "rescue", honestly never considered that!
What gear do you use to video and edit?
I really enjoy your videos please continue the great work!
Hi Robbie. I hope you are we'll. I've missed you online. Let us know if you're okay.
thought i was being original when i talked about the 2p inserts. iv just seen a bowl on ebay with an old 5p in it
yep it being around a long time :-)
HI rOBBIE, WHAT SIZE/ SORT OF LATHE WOULD YA RECCOMMEND STARTING WITH. i DONT REALLY WANT TO BE SPENDING MONEY TWICE..LOL
RODNEY