Mine is definitely a little wonky on the passenger side. There was no a lot of room behind the rear nutsert due to the cup holder. I also had to drill through another piece of plastic behind the console for the upper front nutserts to clear
Ya. There is an additional clip for the console behind the top, front point of attachment. I snapped off this clip to make room for the insert. Obviously I wouldn’t recommend, but it needs to be done to make the two molle panels fit uniformly. Otherwise, you’ll have to place the panel more towards the back/rear-away from the front.
Also the bottom bolt with the long spacer does NOT grab but 2 threads, I had to take the washer off for it to sit, i’ll be replacing that with a longer bolt
Trying to install this kit, the rivets spin in place. The hole is the correct size. Also they never expand. So once I tighten down they pop right back out 🤦🏻♂️
So cool
Yes it is😎
I just installed it...question is the passenger side designed to have more a gap between the center console and the bracket then the driver side ?
It should be pretty similar -- send some photos to the customer service team and they can try to help evaluate!
Mine is definitely a little wonky on the passenger side. There was no a lot of room behind the rear nutsert due to the cup holder. I also had to drill through another piece of plastic behind the console for the upper front nutserts to clear
Ya. There is an additional clip for the console behind the top, front point of attachment. I snapped off this clip to make room for the insert. Obviously I wouldn’t recommend, but it needs to be done to make the two molle panels fit uniformly. Otherwise, you’ll have to place the panel more towards the back/rear-away from the front.
Njluder69 did you get it fixed? My passenger side panel is definitely not as flush as the drivers side . It looks out of place.
@@alexcloyd9620 mine snapped when I was installing and the offset weight provided by the weight of the panel makes it work 👌🏽
Yea my allen bolts were def 5/32 not 3/16
Also the bottom bolt with the long spacer does NOT grab but 2 threads, I had to take the washer off for it to sit, i’ll be replacing that with a longer bolt
Awesome video. Product link in the description doesn’t work :(.
Hi Andrew, sorry about that bud! Check now :)
Trying to install this kit, the rivets spin in place. The hole is the correct size. Also they never expand. So once I tighten down they pop right back out 🤦🏻♂️
Brandon, Please contact our customer support for install help as soon as possible! info@caliraisedled.com (888)-385-5036
I assume you mean 20 inch pounds of torque.