Great tip, worth a shot! Once you cut the vinyl you can try heating it 30 seconds with a blow dryer - it will stick better and conform to irregular shapes and you should get fewer bubbles.
Great tip! Little trick I learned from the FliteTest guys, when cutting lay your blade down at an angle vs holding the handle vertically (might not have been suitable for trying to get the shot for the video). Having the handle and blade an an angle makes for easier cuts. Thanks for sharing!
I use cricut semi permanent vinyl . You can print on the mat finish stuff . Also they have this carbon fibre wanna be stuff on amaz like 8$ for a 5ft roll it's tough last a few trips to the track . Thanks fellow tinkerer!
I do the same to my RCs, but I separate the vinyl into 3 parts, front kick up, middle and back kick up. Usually only the front and back need to replace and very easily.
Great vid! I don't think that sheet would last as much as Protek or AE chassis protectors. Those things last forever and you can peel them off and stick them on again without any issues. I have tried using many vinyls out there. Nothing works like Protek or AE sheets. AE are even better than protek
Great tip, worth a shot! Once you cut the vinyl you can try heating it 30 seconds with a blow dryer - it will stick better and conform to irregular shapes and you should get fewer bubbles.
Great tip! Little trick I learned from the FliteTest guys, when cutting lay your blade down at an angle vs holding the handle vertically (might not have been suitable for trying to get the shot for the video). Having the handle and blade an an angle makes for easier cuts. Thanks for sharing!
What about all the screws you're covering up?
Giving a light sand around the edges give it a nice finish it also helps stopping it starting to catch edges and start pealing up
I use cricut semi permanent vinyl . You can print on the mat finish stuff . Also they have this carbon fibre wanna be stuff on amaz like 8$ for a 5ft roll it's tough last a few trips to the track . Thanks fellow tinkerer!
How's the thickness and does it hold against scratches????
With my ocd I would prefer to trace and precut it then only stick..just need to keep one template for the next one..😁
I do the same to my RCs, but I separate the vinyl into 3 parts, front kick up, middle and back kick up. Usually only the front and back need to replace and very easily.
Good tip!
It's also about customizing the bottom of ur chasic.. not just the typical pro tek chasic protecter
This material Link looks like it’s discontinued. Do you have an updated link to someone that sells it.Thanks
Is this easy to replace or peal off?
Great tip. Thanks for sharing
Thanks great hack. Thanks for sharing. A bit late for me I just order a protector for my XB4 but will do it for the next one. 🤦
What material is this ?
Hoping my RazorRC sticker arrives shortly - now I know how to protect it! :)
Thanks for the support!
Great vid!
I don't think that sheet would last as much as Protek or AE chassis protectors. Those things last forever and you can peel them off and stick them on again without any issues.
I have tried using many vinyls out there. Nothing works like Protek or AE sheets. AE are even better than protek
I agree but worth a try, I mean a roll is going to cost you as much as 1 AE or Protek protector 👍
it definitely does not last as long as a real protector, but it's cheap and you can do 10 cars for about $20.
@@RazorRC Sure, I agree. But, at least, in my case, after buying so many different vinyls I always end up getting protek or AE sheet.
Do you know if this will work on anodized aluminum chassis like RC10's without harming the surface or leaving a nasty residue?
Great video 👍
Nice tip!
quick hit of the heat gun....
not bad,
Thats a fantastic Tip. Great how to and a great video bro 👍 should work 👍😎👍
Welp, time to get to work.
Yo! I need everything in this video! I just ordered sticker and protector! Thanks razor I'll help support you.
thanks for the support!
👍
WOW, what an amazing and secret knowledge you have shared with us! Sticker on the bottom, genius !!! "you can buy this stufff..." WOW XDDDDD
Glad to help