I enjoy my Marantz 7706. Used a Denon 6500 with my Monolith 11 before the 7706. Biggest difference for me is the separation within the sound stage. Panning effects within the soundstage is more accurate and responsive. Ambient sound effects are much more noticeable enhancing immersion in a movie. Sounds are just more distinctive. Think of a choir and instead of just hearing the collective singing you can actually distinguish individual voices within the choir. That is how I perceived the upgrade to true separates. You will hear sounds in movies you didn't before. It does take a little while getting used to since your ears are accustomed to hearing a movie a certain way. I do not want to go back ever. Thanks for the overview my man.
@@TechnoDad I love your vids you always make me smile, I couldn’t believe what you said re the Marantz design I thought I was alone I hate the design too! But I do love the sound of this unit its awesom. Keep up the good work x
My AV7706 has been running since Dec 2020 powered by MM8077 and MM7055 (3 blue portholes - lol) connected with 11 Audioquest Red River XLR cables for my 7.2.4 home theater. All 3 Marantz units are cooled with AC Infinity. Also got the free Marantz SPK618 HDMI adapter kit to resolve the 4K @ 120Hz issue (before the fix) when playing on the PS5. Everything working like a dream on my vertical rack. Channa, thanks for making this video and reminding me why I decided on this setup.
Welcome to the dark side. I had a SR7010 in my theater and upgraded to the AV7705 Back in 2019. I'm using it with Emotiva amps XPA1 x 3, Basx A-300 and Basx A-700 with Klipsch speakers 7.2.4 and 2-SVS PB3k subs. I moved the SR7010 to the FR 5.1.2 system. You will Love it once you get it dialed in. Love your content. Good Luck PM
The port hole is annoying from a functional standpoint, but great from an aesthetic standpoint. Both are equally important to me if the equipment is going to be visible in a space. The basic rectangle just looks cheap to me, especially when it's off.
Nice addition. I had the Marantz SR-6013’s but went separates with the Marantz AV7705’s. I run two systems with the 7705’s. Klipsch 7.4 with the Parasound A-23+ and A-52+ and SVS 7.4 with the Emotivia DR3 and XPA5,G3. The improvement in sound separation and clarity was very noticeable.
I'm interested to hear your opinion if seperates with a Preamp Processor/AMP sounds better than using a Receiver/AMP. I saw Youthman's video on this and they noticed a difference....curious if you do as well?
Honestly if you have good speakers that can take advantage of the extra power they will sound better. Also a pre pro will output a better soundstage as well
@@ovlivion81 what evidence that there is more separation. Why would that be the case, if there is little crosstalk on an integrated. I can understand better components for the preamp due to cost. Then again you are running your preamp down cables instead if Intergrated circuits, which I would have thought degrades the signal. So yeah, I am yet to see a real scientific reason why seperates are better with the exact same electronics.
@@nickmaddalena985 they do a pretty good capture of how the seperates give you a different sound stage. True it’s all anecdotal instead of the tech that causes it.
Great video and processor! Too rich for my blood but since I had leftover money with Emotiva Emobucks I purchased the Emotiva BasX MC1 and gave it a shot. And I have to say OMG it is soooo good and so much better than my Denon X3700H in pre-amp mode! I didn't expect to hear much difference but just like user: Keeping up with the Jones' said below I experienced all the same things upgrading. For those on a budget I totally recommend the MC1. Not sure why it hasn't been reviewed as much because it has to be the best 13 ch processor for the money. For around $2500 you can have TWO Emotiva Amps and an MC1 for a complete 13 ch setup for less than the cost of the Marantz AV7706.
I used Denon receivers for a long time and then into Marantz when I went to separates. First, an AV7702 and then an AV7704. I've moved to Anthem now, but Marantz was really great. That 770X level of preamp used to be around $2,000 and now close to $3,000. That's tough, but great units, plenty of features, and solid performance from my time using them. Nice video and love your editing, as usual!
@@rayking507 I don’t even remember. Last Denon I used was over 10ish years ago now. I never used one as a preamp. Just as a full receiver. Then I changed to separated with the 7702 and haven’t looked back.
Hi Channa! I just picked up a Marantz SR-5015. Not big fan of the portal either! At least you have the flip down panel with a full display. Love all of the connectivity options on that processor. Love those XLR’s. My SR-5015 has seven pre-outs. I am using it as a pre/pro for the 5.1.2 system in our TV room. We have the AV8805 in our home theater. Absolutely love both Marantz units!
I use the Marantz 7706 in my home theater. I’ve been kicking around the idea of doing a head-to-head comparison with my Onkyo AVR. I’m pretty sure the 7706 will sound better, I’m just curious to hear how MUCH better.
I don't hate the port hole. I think it looks cool. BUT, it's so useless, that I need to keep the big door opened all the time. It's not a problem for me, because my 7702 is in a cabinet behind tinted glass doors. The port hole would great if it would display the volume much bigger. I really don't like having an on-screen display because it takes me and my guests out of the experience when I make a minor volume adjustment. I need to make an upgrade because I just moved to a Sony 5000es 4k projector, and the 7702 isn't UHD blu-ray compatible or HDR compatible. I considering the 7706 or a less expensive AVR that has pre-amp outs.
Thanks for the plug for my remote calibration services! I can't wait to get those Focal's dialed in. Pick up a MiniDSP 2x4HD from Deer Creek Audio when ASAP. We're gonna take those REL's to the next level whether they like it or not! LOL.
I purchased this processor for running a 9.2 setup using front height speakers. Even though I don't have an atmos setup I think this does a great job for movies and games
I have the Marantz av8805a 2.1 with Yamaha aventage 5200 11 Chanel’s and Marantz mm7025 x two b&w 12inch subwoofers and 6 hight atoms and Kef r all round sounds awesome 7,2.6 and Sony 85inch zh8 👍
Once you try separates , you never go in back to a simple avr receiver , my set up marantz av 8805 pre pro , + 2 marantz mm8077 powered amps, this is the best purchase ever made , it is worth every penny I spend on it
Hello audiophiles, I own a Marantz AV7706 pre processor which I am still learning about the features it has. I wonder about if an external DAC converter is a good idea to add on to improve the sound of the AV-7706 receiver. Any suggestions or comments based in your current experience is appreciated. Love these learning videos
Hi! I’m not sure if you’ll notice much of a difference with an external DAC, especially if you run a multichannel setup. I think dialing in your room correction might be a better thing to do.
So you don't have to match a pre amp processor with a power amplifier of the same brand? So you can have a Marantz pre amp processor and a emotiva power amplifier
Great review. I picked up a Marantz SR7013 a few years back paired with Definitive Technology BP7001 fronts and BP7002 rears. The Marantz preforms well.
@@TechnoDad Thank you sir. The AV7706 is on another level. I can't keep up! Kidding aside I am impressed with the Marantz's musicality spectrum. Looking forward to watching The Batman tonight on the sound system yo!
Okay okay. Great video. Question though and I've asked Joe this too, Auro surround heights vs rear heights, how big of a difference is that on a sound perspective. Your set up is just like mine, but i have like 5 feet behind the couch. I have 10 ft ceilings and I plan to make custom brackets that screw into the joists and hang bookshelf speakers above my rear surrounds in a 5.1 bed layer. Planning Auro 10.1
@@TechnoDad oh yeah, im a big fan man. I keep up with you guys. What I'm wondering, is there a sound information difference in setting those surround heights you have to surround versus rear in the avr? Kinda like how you did that atmos video on 5.1.2 vs 7.1.4.
I am on the fence about getting this. I already have all of my speakers (2 towers, 2 rear surround, 2 subs, 1 center channel, 2 front atmos & 2 rear atmos). I may add 2 more atmos in the ceiling later. This looks great but I was also looking at an Emotiva BasX A7. What would you recommend to go with this Marantz?
Hey Techno D, can you set up for height channels a configuration of top fronts and top middles and a voice of good or the voice of god is available just when you set up the system with front and rear heights? Thanks!
I have the 7705 and I agree with you about the display, but after a while you ignore it. My issue is with the remote. It functions as it should sometimes and other times not so much. Maybe I don't use the system enough to keep it continual. I have 3 separate stereo systems and a complete Bose 900 system and I go back and forth dealing with them. Always liked your videos.
@@TechnoDad I have the Harmony Elite but a lot of time and patience has to used in programming it. It's easier just to use a device's supplied remote so it's just sitting gathering dust.
I know this is about audio but I need a video on calibration on the c1. The youtubers aren't putting calibration videos out on the c1. There's a few videos but they are not that good. Dolby is mainly what I care about and I'll probably want hdr calibration done to
After reading a lot and watching lots of vids I want to make the jump to an AV Processor this is my first video to start looking into it. I like your shirt btw where did you get it?
Hi, I'm considering upgrade to a Pioneer Elite LX505 or a Marantz 7706, I know they're different products but considering that Pioneer has DIRAC Live can be a key decision to save some cash and still have new feature ? DIRAC can give me better sound staging or go with a Separate it's the way to go? (I currently have an AV7005 and it's by far the best thing I've bought for my home theater)
Im running 5.2.4 with a Denon X3700 AVR in preamp mode with a Basex- A3 and a BaseX A6. I have been thinking about a processor. Would I hear much difference with a processor compared to the Denon?
@Techno Dad Did they fix the bug with the VRR and Auto low latency yet? Just ordered this beast..hoping I won't regret it. Thanks for the great videos!
Hey Techno Dad, love the channel you’re awesome. Can you possibly review the Trinnov Altitude 32 processor and also their Amplitude amplifiers. That would be awesome if possible. Thank you so much
@@peerguy No I can’t. Could you ! Many TH-cam reviewers get demo units from the supplier for free so they can review them and then send them back later. That’s what I meant when I asked if he could possibly review the unit. Techno Dad is awesome and I hope they send him a unit so he can review it. I would like very much to get his opinion.
The Pioneer LX505 and Onkyo RZ50 have three HDMI 2.1 ports that will support 4K 120Hz HDR VRR. If you want a Denon/Marantz you’ll have to wait. I still have the Series X connected to the Tv first and then eARC the audio to this AV7706.
I just picked up the Marantz AV8805A preamplifier which I will be connecting to a Yamaha Aventage MX-A5000 power amplifier. Should I connect the Oppo UDP-205 directly to the amplifier using the XLR or should I connect it to the preamplifier? I’m not sure which one has better built in DAC’s.
I mean...you could connect the XLR output from the 205 to the stereo XLR input on the 8805a. The XLR input on the 8805a is assignable, so you can route it to whatever input you want. The Oppo 205 has an Ess Sabre DAC with 140 dB of dynamic range. It might be better than the DAC in the Marantz.
Hi! The 7706 will only process 11 channels but the 8805a - amzn.to/3rv1GFk - will support 13 channels, which would be able to run 7.2.6 Atmos. So I think that's the one you should go with.
Got a little question on this device. Is it able to receive an atmos signal digitally, convert it and present it as 7.1 on the analogue outputs? Thanks, I've tried to ask this directly to Marantz but they make it very difficult for me to get in touch with someone who actually has an answer to this.
@@TechnoDad the thing is, it looks like blu rays don’t always get 7.1 or 5.1 tracks anymore. Recently I had to play the latest mission impossible and it only had Atmos or 5.1 descriptive in English. So I was left with a 2.0 analogue output from the Atmos track. We won’t be upgrading to height speakers anytime soon but I want to get a solution that can translate or approximate the Atmos mix on our 7.1 system, if there’s only an Atmos track available.
Quick question I'm about to purchase a processor I'm torn between 2 models. Need your insight. Was looking at the Emotiva XMC 2 ■ Marantz 7706. Want to run 7.6.2. What would recommend ? Thanks great videos like always 😁
I have a Marantz 8805 and absoutely love it. The upgrade from my previous Onkyo integrated amp is beyond words. I agree that the porthole design needs to go, it´s useless. I leave the front open all times to get some usefull info. Since the 8805 I replaced all my speakers except the front L+R to M&K (300 and 150 series) It´s a killer combo. I´m sure You´ll keep the 7706, there´s no turning back now ;-)
@@TechnoDad It´s an awesome setup, I really enjoy it :-) Would You still recommend the M&K 150THX series as front speakers L+R? I watched your review of the 150 series 5.1 system from 2 years back and You were very impressed. Wonder if your oppinion has changed since then since you´ve listened to so much other equipment.
I just purchased this Marantz unit. I went through 2 different used preamp/processors that I bought on ebay & also 1 factory refurbished Rotel pre/pro. The preamp stage in the Rotel is malfunctioning. It's not sending any power to my dedicated power amp. None of my speakers are working except my center channel speaker. I listen to music much more frequently than I watch movies. I'm not into gaming. My question is regarding how this unit performed when you were listening to music in Good ol' stereo? What specifically did you guys like and not like about the way it sounded with the rest of your system? Thanks!
Bro when you gonna do the actual review so we can see what you actually think of this processor and how it compares to the other products like Denon 4700 for example. Love you lots.
Your videos are great very informative! I have a Marantz nr1200 and would like to connect a graphic equalizer to it. Is that possible? If so how. Thanks for your time.
Hi Mike! Thank you so much for watching. EQs are kind of a thing of the past in home situations. If you look online now, EQs are more for pro audio situations and not a whole lot of options for home audio or 2-channel.
Hi can i add Double external Power amplifier to Pre out AVR using y Cable? Sample : Front Pre out ---> Y Cable ----> Double amplifier ----> 4 Front Speaker i have Yamaha A6A and 2 emotiva BasX A7 , 4 R-625FA klipsch Speaker. I want to connect the 4 R-625FA klipsch Speaker as front. thanks
@@TechnoDad Good question . Because I have a lot of speakers, I Have an 11.2 system and I have 18 speakers ( 2 center + 4 Front + 4 surround + 4 surround Back + 4 Atmos ) and I want to use all the Speakers I have To More Power . * All Speakers are of the same type Thanks in advance
Is the term preamp processor one in the same as a typical AVR receiver? Just heard the part there are no amps in this unit. I guess I don’t understand why one would choose something like this instead of a avr with amps. Essentially the same thing minus Apps?
WardoSRT , it is day and night difference When you are using separates, Believe me when I tell you , i’m being owning A separates set up for a couple years now , I have never look back for just a receiver anymore once you hear the difference , anything else sounds inferior
@@2081calin would using a external amp through a preout from a typical avr , provide a similar separation as described? Thank you for the explanation. What you said is on par with the same descriptions for adding a external amp. My problem is I rushed the avr last year and want to make changes the right way. Purchased a Yamaha rx-a2a and failed to realize it doesn’t have enough preouts for L,R,C channels. I changed my front stage twice in the last year and love the svs ultra series. They need more power. Yamaha has me sending the a2a back for hardware hdmi upgrade. I asked them 20 times for a trade in credit. The rx-a4a and a6a have the pre-outs I need. Planning on a big power emotiva amp. Thanks for any feedback.
I have the 7706 and a monolith 7x with a newbie surround speaker setup. Is there a way to set it up where i can have all speakers like a 2 channel(center speaker being normal) setup for music? So that all my speakers on my right play sound and left speakers play on my left? While being set up for surround, the rear and heights just sit idle. I bought xlr splitters so my preamp front right and front right split to 2 channels each to the amp that are connected to different speakers. That seems to work great and give me what im looking for but id think there has to be a better way
I mean, you could do that with cables going from one side to the other, but have you tried the all channel stereo function? You may have to turn off your height channels to just have the ear levels going. You could set it up this way and set it to a quick select button to access it easily.
Hey Techno I have two subs both have xlr and the pre/pro only has 2 xlr sub outs , can i use the RCA sub out for my transducer dj amps or am i screwed ? I have 2 pb16's via XLR and an external rack in the basement for my buttkickers , If I select XLR i cant use the sub out analog (rca) .
HI TECHNO DAD I hope ur well a quick question I hope you can help iv a got media server with remux files stored on a Plex syste. I use a Apple TV 4k to watch the movies on my projector the Apple TV is directly connected to the avr. on the display panel of the avr I only get PCM not DTS hd master or DOLBY ATMOS. hope can I fix this problem all my files are remux raw files with dts master hd audio or dolby atmos please can you give some advice please how to solve this issue
Please post a review on all HDMI 2.1 4k 120fps sources(PS5, Xbox Series X, and NVidia RTX 3000 series) for this unit. I have only gotten PS5 to play nice on this unit since it doesn't use the full HDMI 2.1 bandwidth. It does not do well with Xbox Series X/Nvidia RTX 3000 series GPU cards on 4k 120fps with HDMI 2.1. The NVidia RTX 3000 source would cut out randomly and black screen over 4k 120fps. I tried using the spk618 adaptor box with the RTX 3000 series source. It would black screen less often, but introduces constant audio sync issues. I went and tried to do a direct connection to my tv with the same HDMI 2.1 cable and no issues. Also, 8k enhanced is set on the receiver options and that didn't help. I contacted support and they keep insisting it's a cable or handshake issue. It seems like they did not fix the HDMI 2.1 bug on this unit. Sound united customer support specialist kept saying it's mostly gamers having these issues. Yeah, that's probably a big % of customers who buy this unit as their center media setup.
Well, I have the PS5 and Series X but I don't have an RTX 3000 series graphics card. I just looked on eBay and the prices are pretty high. The RTX 3080s are around $1200 - $1800. Would the RTX 3060 work? I see them from $800 - $1000.
@@TechnoDad Yes, you can go with a RTX 3060 for testing. The video output needs to be set to 4k 120fps and you should get the same testing results. Enable HDR, 10 bit-depth, and G-Sync as well during your testing. The bug issue doesn't seem like it's resolved on this model and customer service won't admit it. On the RTX 3000 series graphic card you choose to go with, there might be a few HDMI ports, but there are specific ports on the card that is HDMI 2.1, the other HDMI port may be a lower version. Please let us know what are your findings. Looking forward to your next video on a full in-depth review of this unit.
@@TechnoDad Weird... TH-cam removed my previous reply. Just replying again to answer your question. Yes, you can go with an RTX 3060 for testing. Set the Nvidia RTX 3000 series output to 4k 120fps. Enable HDR, G-Sync, and 10-bit depth during testing. You should get the same testing results. The bug issue doesn't seem like it's resolved on this model. Customer support wouldn't recognize it as an issue. Looking forward to your full review video on this.
Channa, I've got to tell you, I don't think there is any difference in sound quality between this and a Marantz SR 8015 running in pre amp mode and the Marantz AV7706 running on the exact same amps. might be a unpopular opinion, but there is so much snake oil in the home AV market its hard for me to believe a lot of it. I don't even think there's a difference between the Marantz SR 8015 and the Denon X6700h they are the same the Marantz is just fucked with by a golden ear, Still awesome processor enjoy it!
Oh no we lost you with the processor 😀 Your right I hated my marantz because of the hole hahaha even with the display on the bottom I didn’t like to leave the cover off. That why I’m getting Denon only
RCA sounds way better than XLR if distance to amps are under 2m and they use XLR in pro setups only because distance are much longer and here RCA do not work. XLR got mores compoment in the signal lines that why it is more expensive not because it sounds better.
Still don’t get the whole cardboard stand. They sell high end and that one being 3k, but it still comes with a cardboard crappy stand. I don’t know how they’re not embarrassed to ship that flimsy poor built cardboard stand with their top of the line Amps and receivers. It’s like shipping a Lambo with with a pine tree air freshener hanging from the mirror.
I kind of agree with that. If they can't supply a proper tripod, they should just not try to send the cardboard one. The Anthem MRX720 I have, which retailed for $2,499 has an actual tripod and calibrated mic. Sometimes I think these companies really just take advantage of us.
@@bedroomcinemaguy5568 I have n outdated onkyo TX-NR686 had it for 4 years now plan on replacing it with the Yamaha 3080 model. I definitely can tell when I upgrade it’s gonna be a night and day difference between the old onkyo model I have. But onkyo has definitely lasted a very very long time since I had there av receiver. I have another onkyo that’s like 10 years old I can’t wait to hear the difference when I upgrade my Onkyo TX-NR686 with the Yamaha
Hi ! I have 7.2.4 ...4 speakers up top and the main 5 plus 2 speakers for the surround back ...if i dont set up a voice of god speaker....can i still listen to dolby atmos movies in the Auro 3d mode ...will it do the up mixing even if i dont have the voice of god speaker So you have to connect your top speaker to sub pre out 2??? what if you have 3 subs and using both your pre outs for your subs ..you cant have a top speaker then ...which to me is stupid
I love your vids but with this vid... Marantz sent you this, you didn't pay for it. Your vid title is extremely misleading. Us TH-cam viewers trust your advice so if you buy a 3000$+ first time item it must be good and if I were on the fence and saw a vid from you about your first processor, it must be good right? You shilled bro. I would have bought it if I didn't watch the vid until the very end when you said it was sent to you. So now it's an advertisement and that means you received payment and that means your trusted opinion is bought/biased. Come on man!!!
Sorry to burst your bubble, Steve. This was not sent to me by Marantz. It was sent by Dreamedia Home Theater - 0:48 - I did say it again at the end of the video. I also stated that I would keep it if I liked it and in the three months I've had it, I've gotten rid of my Denon X6700H and picked up the AV7706. With all the work I've done making over 700 videos here on TH-cam, I have the luxury of trying out equipment before I decided to buy it. That being said, is it a huge imporvement over the AVR, I don't think so. It definitely runs cooler thoough...
Nice vid on an expensive amp. yea, sorry, but a 3k$ amp and it only has 1 8k hdmi in (Not really future proof) and no amps, sorry, I will have to say not worth it. Oh, and since it does not have any amps can you call it an amp or should you call it an expensive 4k input switcher.
It’s Called a Pre-amp/Processor. Yeah, they could add another HDMI 2.1 port but that’s not a huge deal as nothing 8K is coming for a while. With these types of devices, it’s about the sound.
I have a 7704. It failed in 3 years. Marantz buyers beware. Just replaced with an Emotiva. My second series of Emotiva after I got some Marantz equipment. The Emotiva never failed.
DO YOU USE BLUETOOTH on MARANTZ?? man, I've got myself a AV7705 and really, I just can't understand how folks in 2020s still produce any system WITHOUT a Bluetooth button on it. just a note: the old version AV7705 will NOT (N O T) offer you a BLUETOOTH button on it. That means if you pair anything to it, it WILL NOT (N O T) recognize your paired (cellphone, etc) automatically. you MUST (M U S T) have the AV7705 remote control and press the Bluetooth button on it; then it will find your paired cellphone (ETC). So, if ANYTHING wrong happens to your remote control, that signifies = you wont be able to use your MARANTZ / SPEAKERS / BLUETOOTH. a m a z i n g. unbelievable. Next time I'd buy anything from Marantz (or any brand) will be first : "does it even has a bluetooth button on it?". DOES THIS AV 7706 have bluetooth button on it (of is it only on the remote control) ???
Hi! I actually have never pressed that button. When my wife wants to play Pandora from her phone, she taps the cast icon in the app and then Airplay & Bluetooth and then selects the Marantz. Then the music plays through the Marantz.
@@TechnoDad well, for whatever reason, my cellphone & Marantz would NOT pair at all (I tried for 2h). I tried everything possible. Marantz would NOT offer any way possible to activate the "Bluetooth". I gave up for that day. But then, everything worked as usual the next day as though nothing happened.
I enjoy my Marantz 7706. Used a Denon 6500 with my Monolith 11 before the 7706. Biggest difference for me is the separation within the sound stage. Panning effects within the soundstage is more accurate and responsive. Ambient sound effects are much more noticeable enhancing immersion in a movie. Sounds are just more distinctive. Think of a choir and instead of just hearing the collective singing you can actually distinguish individual voices within the choir. That is how I perceived the upgrade to true separates. You will hear sounds in movies you didn't before. It does take a little while getting used to since your ears are accustomed to hearing a movie a certain way. I do not want to go back ever. Thanks for the overview my man.
Yeah, I can’t wait to get it connected up!! I still have to shoot some other footage first.
@@TechnoDad I love your vids you always make me smile, I couldn’t believe what you said re the Marantz design I thought I was alone I hate the design too! But I do love the sound of this unit its awesom. Keep up the good work x
My AV7706 has been running since Dec 2020 powered by MM8077 and MM7055 (3 blue portholes - lol) connected with 11 Audioquest Red River XLR cables for my 7.2.4 home theater. All 3 Marantz units are cooled with AC Infinity. Also got the free Marantz SPK618 HDMI adapter kit to resolve the 4K @ 120Hz issue (before the fix) when playing on the PS5. Everything working like a dream on my vertical rack.
Channa, thanks for making this video and reminding me why I decided on this setup.
I’ve just bit the bullet and bought the 7706. It’s going to be connected to the xpa 3 gen3 for the fronts and the basx a7 for surrounds and atmos.
Nice!
Welcome to the dark side. I had a SR7010 in my theater and upgraded to the AV7705 Back in 2019. I'm using it with Emotiva amps XPA1 x 3, Basx A-300 and Basx A-700 with Klipsch speakers 7.2.4 and 2-SVS PB3k subs. I moved the SR7010 to the FR 5.1.2 system. You will Love it once you get it dialed in. Love your content.
Good Luck
PM
Thanks for watching, Paul!
The port hole is annoying from a functional standpoint, but great from an aesthetic standpoint. Both are equally important to me if the equipment is going to be visible in a space. The basic rectangle just looks cheap to me, especially when it's off.
Nice addition. I had the Marantz SR-6013’s but went separates with the Marantz AV7705’s. I run two systems with the 7705’s. Klipsch 7.4 with the Parasound A-23+ and A-52+ and SVS 7.4 with the Emotivia DR3 and XPA5,G3. The improvement in sound separation and clarity was very noticeable.
is your systems on svs site ? and how is the hum or hiss on the a52+?
@@junior-OG - Yes sir. No hum with the A-52+ after installing the isolator for the cable box.
Nice!!!
Give us link from SVS site. Thanks.
I'm interested to hear your opinion if seperates with a Preamp Processor/AMP sounds better than using a Receiver/AMP. I saw Youthman's video on this and they noticed a difference....curious if you do as well?
Honestly if you have good speakers that can take advantage of the extra power they will sound better. Also a pre pro will output a better soundstage as well
@@ovlivion81 what evidence that there is more separation. Why would that be the case, if there is little crosstalk on an integrated. I can understand better components for the preamp due to cost. Then again you are running your preamp down cables instead if Intergrated circuits, which I would have thought degrades the signal. So yeah, I am yet to see a real scientific reason why seperates are better with the exact same electronics.
@@nickmaddalena985 they do a pretty good capture of how the seperates give you a different sound stage. True it’s all anecdotal instead of the tech that causes it.
@@ovlivion81 I just bouight one myself (7706)
so I'll provide some insights as well. I currently have a Marantz 7015.
@@Linkone7 that sounds great. 👍 interested in your feedback as well!
Great video and processor! Too rich for my blood but since I had leftover money with Emotiva Emobucks I purchased the Emotiva BasX MC1 and gave it a shot. And I have to say OMG it is soooo good and so much better than my Denon X3700H in pre-amp mode! I didn't expect to hear much difference but just like user: Keeping up with the Jones' said below I experienced all the same things upgrading. For those on a budget I totally recommend the MC1. Not sure why it hasn't been reviewed as much because it has to be the best 13 ch processor for the money. For around $2500 you can have TWO Emotiva Amps and an MC1 for a complete 13 ch setup for less than the cost of the Marantz AV7706.
Marc A you are so right my man i pickup one of those Mc1 and 2 bassx amp and im blow away.
I used Denon receivers for a long time and then into Marantz when I went to separates. First, an AV7702 and then an AV7704. I've moved to Anthem now, but Marantz was really great. That 770X level of preamp used to be around $2,000 and now close to $3,000. That's tough, but great units, plenty of features, and solid performance from my time using them. Nice video and love your editing, as usual!
Which denon did you have and have u used it on pre amp mode. And how do they compare.
@@rayking507 I don’t even remember. Last Denon I used was over 10ish years ago now. I never used one as a preamp. Just as a full receiver. Then I changed to separated with the 7702 and haven’t looked back.
@@Techthusiasm Did you try the MRX 740 and how does it compare to the AVM 70 or the Marantz 7704. Many thanks.
Love the shout out to JoeNTell and his magic bean's
You speak very eloquently great communicator and I am a person who speaks publicly everyday
Hi Channa! I just picked up a Marantz SR-5015. Not big fan of the portal either! At least you have the flip down panel with a full display. Love all of the connectivity options on that processor. Love those XLR’s. My SR-5015 has seven pre-outs. I am using it as a pre/pro for the 5.1.2 system in our TV room. We have the AV8805 in our home theater. Absolutely love both Marantz units!
Nice! Sounds like you have a Marantz family in that house!
I use the Marantz 7706 in my home theater. I’ve been kicking around the idea of doing a head-to-head comparison with my Onkyo AVR. I’m pretty sure the 7706 will sound better, I’m just curious to hear how MUCH better.
Right! It may or may not be worth the extra cost.
I don't hate the port hole. I think it looks cool. BUT, it's so useless, that I need to keep the big door opened all the time. It's not a problem for me, because my 7702 is in a cabinet behind tinted glass doors. The port hole would great if it would display the volume much bigger. I really don't like having an on-screen display because it takes me and my guests out of the experience when I make a minor volume adjustment. I need to make an upgrade because I just moved to a Sony 5000es 4k projector, and the 7702 isn't UHD blu-ray compatible or HDR compatible. I considering the 7706 or a less expensive AVR that has pre-amp outs.
Thanks for the plug for my remote calibration services! I can't wait to get those Focal's dialed in. Pick up a MiniDSP 2x4HD from Deer Creek Audio when ASAP. We're gonna take those REL's to the next level whether they like it or not! LOL.
Oh yeah!!!
I purchased this processor for running a 9.2 setup using front height speakers. Even though I don't have an atmos setup I think this does a great job for movies and games
Nice!
Congrats on the marantz. I have been running the same model for some time now.
2x 7 channel tonewinner 7300. And a sinbosen fp14000 for the bass
I have the Marantz av8805a 2.1 with Yamaha aventage 5200 11 Chanel’s and Marantz mm7025 x two b&w 12inch subwoofers and 6 hight atoms and Kef r all round sounds awesome 7,2.6 and Sony 85inch zh8 👍
Woot woot! Sounds like a great setup, Toddy!
Once you try separates , you never go in back to a simple avr receiver , my set up marantz av 8805 pre pro , + 2 marantz mm8077 powered amps, this is the best purchase ever made , it is worth every penny I spend on it
So what you go to the 8805 instead of other brands. Are you finding this unit is an upgrade to the 7706
. Thanks
Nice!!
@@chrissheldrick4073 , I usually go for the top of the line, because they are built with better parts , meaning better sound and longevity
Would be great to hear why you would never go back.
- Sound quality ?
- upgrade path ?
- features ?
@@nickmaddalena985 , this is my demo from my channel th-cam.com/video/zm99GpWJwkw/w-d-xo.html
I have a Denon 3313ci and had the 7706 in mind for an upgrade but can’t get past that small round display on the Marantz
Hello audiophiles, I own a Marantz AV7706 pre processor which I am still learning about the features it has. I wonder about if an external DAC converter is a good idea to add on to improve the sound of the AV-7706 receiver. Any suggestions or comments based in your current experience is appreciated. Love these learning videos
Hi! I’m not sure if you’ll notice much of a difference with an external DAC, especially if you run a multichannel setup. I think dialing in your room correction might be a better thing to do.
So you don't have to match a pre amp processor with a power amplifier of the same brand?
So you can have a Marantz pre amp processor and a emotiva power amplifier
That’s correct
Great review. I picked up a Marantz SR7013 a few years back paired with Definitive Technology BP7001 fronts and BP7002 rears. The Marantz preforms well.
Nice, David!!
@@TechnoDad Thank you sir. The AV7706 is on another level. I can't keep up! Kidding aside I am impressed with the Marantz's musicality spectrum. Looking forward to watching The Batman tonight on the sound system yo!
Okay okay. Great video. Question though and I've asked Joe this too, Auro surround heights vs rear heights, how big of a difference is that on a sound perspective. Your set up is just like mine, but i have like 5 feet behind the couch. I have 10 ft ceilings and I plan to make custom brackets that screw into the joists and hang bookshelf speakers above my rear surrounds in a 5.1 bed layer. Planning Auro 10.1
Hi Mike! I run Surround Heights but in the AVR I tell it they are Rear Heights. This is they only way to get all immersive audio formats.
@@TechnoDad oh yeah, im a big fan man. I keep up with you guys. What I'm wondering, is there a sound information difference in setting those surround heights you have to surround versus rear in the avr? Kinda like how you did that atmos video on 5.1.2 vs 7.1.4.
Did you keep it..? If so what's your final opinion on this compared to a avr?
was the difference between your receiver and processor noticeable?
I am on the fence about getting this. I already have all of my speakers (2 towers, 2 rear surround, 2 subs, 1 center channel, 2 front atmos & 2 rear atmos). I may add 2 more atmos in the ceiling later. This looks great but I was also looking at an Emotiva BasX A7. What would you recommend to go with this Marantz?
Thx i have learn so mutch from your Movies thx alot
Hey Techno D, can you set up for height channels a configuration of top fronts and top middles and a voice of good or the voice of god is available just when you set up the system with front and rear heights? Thanks!
I have the 7705 and I agree with you about the display, but after a while you ignore it. My issue is with the remote. It functions as it should sometimes and other times not so much. Maybe I don't use the system enough to keep it continual. I have 3 separate stereo systems and a complete Bose 900 system and I go back and forth dealing with them. Always liked your videos.
I use a Harmony remote, so I won't be using the remote that came with the AV7706.
@@TechnoDad I have the Harmony Elite but a lot of time and patience has to used in programming it. It's easier just to use a device's supplied remote so it's just sitting gathering dust.
I’m pretty sure if you want 5.1 or 7.1 you select 11.1 and only select the options that add up to 5.1 or 7.1. I feel like my Denon X4700H is the same.
I can agree with that!
surprise you didnt go the audio control x7 or x9 runmors that they will be upgrading to HDMI 2.1 and they have all the codecs you like like Aura
I bought one but five months later and nothing. So I canceled my order.
I know this is about audio but I need a video on calibration on the c1. The youtubers aren't putting calibration videos out on the c1. There's a few videos but they are not that good. Dolby is mainly what I care about and I'll probably want hdr calibration done to
Hi Alan! My pattern generator is not working well with the Calman Calibration software right now, so I haven’t done a calibration just yet.
After reading a lot and watching lots of vids I want to make the jump to an AV Processor this is my first video to start looking into it. I like your shirt btw where did you get it?
Hi! I got it online, it popped up on my Facebook feed. It's been years, so I'm not 100% sure where it's from.
Hi, I'm considering upgrade to a Pioneer Elite LX505 or a Marantz 7706, I know they're different products but considering that Pioneer has DIRAC Live can be a key decision to save some cash and still have new feature ? DIRAC can give me better sound staging or go with a Separate it's the way to go? (I currently have an AV7005 and it's by far the best thing I've bought for my home theater)
Im running 5.2.4 with a Denon X3700 AVR in preamp mode with a Basex- A3 and a BaseX A6. I have been thinking about a processor. Would I hear much difference with a processor compared to the Denon?
@Techno Dad
Did they fix the bug with the VRR and Auto low latency yet? Just ordered this beast..hoping I won't regret it. Thanks for the great videos!
Somebody said they did and I need to look into it again.
Hey Techno Dad, love the channel you’re awesome. Can you possibly review the Trinnov Altitude 32 processor and also their Amplitude amplifiers. That would be awesome if possible.
Thank you so much
Hi George! If I can get them to send me one, I’m totally down to do so.
Hey George Thomas, could you buy the Trinnov processor and ship it to Techno Dad?
@@peerguy No I can’t. Could you !
Many TH-cam reviewers get demo units from the supplier for free so they can review them and then send them back later. That’s what I meant when I asked if he could possibly review the unit.
Techno Dad is awesome and I hope they send him a unit so he can review it. I would like very much to get his opinion.
Hi
what abut Yamaha Aura 3D We are waiting for your review
Thanks
Only 9 channels of Auro-3D...
I have the same one and have been quite happy with it.
Nice!!
Video quality is very 👍👍👍
Thank you!
Hi, are there many differences between your marantz and the anthem avm 70? Thank you in advance
Anthem AVM 70 you just plug rca or xlr and it detect the proper inputs no setup menu required for that.
Nice! That's convenient.
I have two high powered gaming machines, but this only has one HDMI 2.1 input. Guess I have to keep waiting for the right processor.
The Pioneer LX505 and Onkyo RZ50 have three HDMI 2.1 ports that will support 4K 120Hz HDR VRR. If you want a Denon/Marantz you’ll have to wait. I still have the Series X connected to the Tv first and then eARC the audio to this AV7706.
Ohh yeah!
Boom!!!
Is this a DAC as well?
I just picked up the Marantz AV8805A preamplifier which I will be connecting to a Yamaha Aventage MX-A5000 power amplifier. Should I connect the Oppo UDP-205 directly to the amplifier using the XLR or should I connect it to the preamplifier? I’m not sure which one has better built in DAC’s.
I mean...you could connect the XLR output from the 205 to the stereo XLR input on the 8805a. The XLR input on the 8805a is assignable, so you can route it to whatever input you want. The Oppo 205 has an Ess Sabre DAC with 140 dB of dynamic range. It might be better than the DAC in the Marantz.
@@TechnoDad Thanks! I never thought of doing that. I’m going to take care of that right after work tomorrow 😂
which Marantz would u suggest AV7706 or AV8805a, i have 7.2.4 from Denon AVR3700h (as pre amp) and i like to go with 7.2.6 to Aura 3d.
Hi! The 7706 will only process 11 channels but the 8805a - amzn.to/3rv1GFk - will support 13 channels, which would be able to run 7.2.6 Atmos. So I think that's the one you should go with.
Thank u Techno Dad
Marantz 8805a 2.1 all the way buddy
@@toddy3474 Thank You
Got a little question on this device.
Is it able to receive an atmos signal digitally, convert it and present it as 7.1 on the analogue outputs?
Thanks, I've tried to ask this directly to Marantz but they make it very difficult for me to get in touch with someone who actually has an answer to this.
Hi! It might only be taking the 7.1 mix and not an Atmos mix down.
@@TechnoDad the thing is, it looks like blu rays don’t always get 7.1 or 5.1 tracks anymore. Recently I had to play the latest mission impossible and it only had Atmos or 5.1 descriptive in English. So I was left with a 2.0 analogue output from the Atmos track.
We won’t be upgrading to height speakers anytime soon but I want to get a solution that can translate or approximate the Atmos mix on our 7.1 system, if there’s only an Atmos track available.
ต้องมีห้องขนาด6×8feet เพราะว่าระบบ atmos sound #?
Quick question I'm about to purchase a processor I'm torn between 2 models. Need your insight. Was looking at the Emotiva XMC 2 ■ Marantz 7706. Want to run 7.6.2. What would recommend ? Thanks great videos like always 😁
Hi! The 7706 will only run 11 channels, so if you want 7.2.6, then you’re going to need a different processor.
I have a Marantz 8805 and absoutely love it. The upgrade from my previous Onkyo integrated amp is beyond words. I agree that the porthole design needs to go, it´s useless. I leave the front open all times to get some usefull info. Since the 8805 I replaced all my speakers except the front L+R to M&K (300 and 150 series) It´s a killer combo. I´m sure You´ll keep the 7706, there´s no turning back now ;-)
Nice setup!
@@TechnoDad It´s an awesome setup, I really enjoy it :-) Would You still recommend the M&K 150THX series as front speakers L+R? I watched your review of the 150 series 5.1 system from 2 years back and You were very impressed. Wonder if your oppinion has changed since then since you´ve listened to so much other equipment.
I just purchased this Marantz unit.
I went through 2 different used preamp/processors that I bought on ebay
& also 1 factory refurbished Rotel
pre/pro.
The preamp stage in the Rotel is malfunctioning. It's not sending any power to my dedicated power amp.
None of my speakers are working except my center channel speaker.
I listen to music much more frequently than I watch movies. I'm not into gaming.
My question is regarding how this unit performed when you were listening to music in Good ol' stereo?
What specifically did you guys like and not like about the way it sounded with the rest of your system?
Thanks!
Bro when you gonna do the actual review so we can see what you actually think of this processor and how it compares to the other products like Denon 4700 for example. Love you lots.
Hi Ray! Still using the AV7706 and I’d have to connect up the Denon again to see if there’s a big enough difference.
Welcome to the dark side community I’ve been here since 2019 with the Yamaha CXA5200. I’m hoping the new CXA5300 comes out soon for hdmi 2.1
Will there be a CXA5300?
@@alipazooki9297 no reason why not
@@alipazooki9297 on avsforum one guy said he asked yamaha they said no more processor😥
@@junior-OG I knew it. Yeah while they were great they didn't sell that well. Stick with denon and use the pre amp mode. Best suggestion.
@@alipazooki9297 im gonna wait till end of the year if no more yamaha processor im going with anthem avm70 or jbl sdp55
Your videos are great very informative! I have a Marantz nr1200 and would like to connect a graphic equalizer to it. Is that possible? If so how. Thanks for your time.
Hi Mike! Thank you so much for watching. EQs are kind of a thing of the past in home situations. If you look online now, EQs are more for pro audio situations and not a whole lot of options for home audio or 2-channel.
@@TechnoDad I kind of thought that but wasn't really sure. Thanks for responding. Keep up the great work. Learning a lot from your videos....👍
Where did you get the shirt
I'll never tell! :)
Hi
can i add Double external Power amplifier to Pre out AVR using y Cable?
Sample : Front Pre out ---> Y Cable ----> Double amplifier ----> 4 Front Speaker
i have Yamaha A6A and 2 emotiva BasX A7 , 4 R-625FA klipsch Speaker.
I want to connect the 4 R-625FA klipsch Speaker as front.
thanks
Hi! Why do you want to double the amplifier? I'm confused.
@@TechnoDad Good question . Because I have a lot of speakers, I Have an 11.2 system and I have 18 speakers ( 2 center + 4 Front + 4 surround + 4 surround Back + 4 Atmos ) and I want to use all the Speakers I have To More Power .
* All Speakers are of the same type
Thanks in advance
Great work bruda, really looking forward to your review of the 7706!! I LOVE my MC1.
Separates are just cool y’all…
Yeah, I can't wait to get it in and running!
Is the term preamp processor one in the same as a typical AVR receiver?
Just heard the part there are no amps in this unit.
I guess I don’t understand why one would choose something like this instead of a avr with amps. Essentially the same thing minus Apps?
WardoSRT , it is day and night difference When you are using separates, Believe me when I tell you , i’m being owning A separates set up for a couple years now , I have never look back for just a receiver anymore once you hear the difference , anything else sounds inferior
@@2081calin would using a external amp through a preout from a typical avr , provide a similar separation as described?
Thank you for the explanation. What you said is on par with the same descriptions for adding a external amp.
My problem is I rushed the avr last year and want to make changes the right way.
Purchased a Yamaha rx-a2a and failed to realize it doesn’t have enough preouts for L,R,C channels.
I changed my front stage twice in the last year and love the svs ultra series. They need more power.
Yamaha has me sending the a2a back for hardware hdmi upgrade. I asked them 20 times for a trade in credit.
The rx-a4a and a6a have the pre-outs I need.
Planning on a big power emotiva amp.
Thanks for any feedback.
I have the 7706 and a monolith 7x with a newbie surround speaker setup. Is there a way to set it up where i can have all speakers like a 2 channel(center speaker being normal) setup for music? So that all my speakers on my right play sound and left speakers play on my left? While being set up for surround, the rear and heights just sit idle. I bought xlr splitters so my preamp front right and front right split to 2 channels each to the amp that are connected to different speakers. That seems to work great and give me what im looking for but id think there has to be a better way
I mean, you could do that with cables going from one side to the other, but have you tried the all channel stereo function? You may have to turn off your height channels to just have the ear levels going. You could set it up this way and set it to a quick select button to access it easily.
Hey Techno I have two subs both have xlr and the pre/pro only has 2 xlr sub outs , can i use the RCA sub out for my transducer dj amps or am i screwed ? I have 2 pb16's via XLR and an external rack in the basement for my buttkickers , If I select XLR i cant use the sub out analog (rca) .
Can you daisy chain the PB16s then use the other XLR out for the but kickers?
The old track in the intro is much better!!
HI TECHNO DAD I hope ur well a quick question I hope you can help iv a got media server with remux files stored on a Plex syste. I use a Apple TV 4k to watch the movies on my projector the Apple TV is directly connected to the avr. on the display panel of the avr I only get PCM not DTS hd master or DOLBY ATMOS.
hope can I fix this problem all my files are remux raw files with dts master hd audio or dolby atmos please can you give some advice please how to solve this issue
Hi! I am not sure if Atmos is supported through Plex on the ATV4K.
Please post a review on all HDMI 2.1 4k 120fps sources(PS5, Xbox Series X, and NVidia RTX 3000 series) for this unit. I have only gotten PS5 to play nice on this unit since it doesn't use the full HDMI 2.1 bandwidth. It does not do well with Xbox Series X/Nvidia RTX 3000 series GPU cards on 4k 120fps with HDMI 2.1. The NVidia RTX 3000 source would cut out randomly and black screen over 4k 120fps. I tried using the spk618 adaptor box with the RTX 3000 series source. It would black screen less often, but introduces constant audio sync issues. I went and tried to do a direct connection to my tv with the same HDMI 2.1 cable and no issues. Also, 8k enhanced is set on the receiver options and that didn't help. I contacted support and they keep insisting it's a cable or handshake issue. It seems like they did not fix the HDMI 2.1 bug on this unit. Sound united customer support specialist kept saying it's mostly gamers having these issues. Yeah, that's probably a big % of customers who buy this unit as their center media setup.
Well, I have the PS5 and Series X but I don't have an RTX 3000 series graphics card. I just looked on eBay and the prices are pretty high. The RTX 3080s are around $1200 - $1800. Would the RTX 3060 work? I see them from $800 - $1000.
@@TechnoDad Yes, you can go with a RTX 3060 for testing. The video output needs to be set to 4k 120fps and you should get the same testing results. Enable HDR, 10 bit-depth, and G-Sync as well during your testing. The bug issue doesn't seem like it's resolved on this model and customer service won't admit it. On the RTX 3000 series graphic card you choose to go with, there might be a few HDMI ports, but there are specific ports on the card that is HDMI 2.1, the other HDMI port may be a lower version. Please let us know what are your findings. Looking forward to your next video on a full in-depth review of this unit.
@@TechnoDad Weird... TH-cam removed my previous reply. Just replying again to answer your question. Yes, you can go with an RTX 3060 for testing. Set the Nvidia RTX 3000 series output to 4k 120fps. Enable HDR, G-Sync, and 10-bit depth during testing. You should get the same testing results. The bug issue doesn't seem like it's resolved on this model. Customer support wouldn't recognize it as an issue. Looking forward to your full review video on this.
คือปรีแอมป์ ก็น่าเล่นแต่เปลืองไฟ เปลืองงบดุล งานก็ไม่มีแย่ ภาพและเสียงแอมป์ในตัวก็พอแล้ว?
isi it possible to set it up for 5.1 speakers ?
Yes.
Marantz 7706 have dts pro
Thanks for the review
Channa, I've got to tell you, I don't think there is any difference in sound quality between this and a Marantz SR 8015 running in pre amp mode and the Marantz AV7706 running on the exact same amps. might be a unpopular opinion, but there is so much snake oil in the home AV market its hard for me to believe a lot of it. I don't even think there's a difference between the Marantz SR 8015 and the Denon X6700h they are the same the Marantz is just fucked with by a golden ear, Still awesome processor enjoy it!
I can’t wait to try both the Marantz and Denon in my studio! I’m sure I would not hear a difference
@@TechnoDad do a video on it in ATMOS 😉
Hello i need some help i now have Xbox series x and the LG c1 65 my reciver denon 4500h it is not 120hz
Hi! I would go with XBOX > TV > AVR via eARC. Here's a video - th-cam.com/video/Ik6Aco1w07g/w-d-xo.html
No akm dac in them anymore, it's Texas Instruments.
That’s right! I wonder what production run started with TI DACs???
Oh no we lost you with the processor 😀
Your right I hated my marantz because of the hole hahaha even with the display on the bottom I didn’t like to leave the cover off.
That why I’m getting Denon only
Man, it sucks! Oh well...
RCA sounds way better than XLR if distance to amps are under 2m and they use XLR in pro setups only because distance are much longer and here RCA do not work. XLR got mores compoment in the signal lines that why it is more expensive not because it sounds better.
Track #6 Slaps hard.
Thank you for the feedback!!!
Great program
good luck with it Channa D.
Thank you, Mike!
น่าจะคนพูดอยู่ บรูไน หรือบรูเลย์ เก่งผมไม่รู้เรื่องเครื่องเสียง
Don’t turn on Dynamic EQ if you don’t want to be spoiled by it. Thank me later.
Still don’t get the whole cardboard stand.
They sell high end and that one being 3k, but it still comes with a cardboard crappy stand.
I don’t know how they’re not embarrassed to ship that flimsy poor built cardboard stand with their top of the line Amps and receivers.
It’s like shipping a Lambo with with a pine tree air freshener hanging from the mirror.
I kind of agree with that. If they can't supply a proper tripod, they should just not try to send the cardboard one. The Anthem MRX720 I have, which retailed for $2,499 has an actual tripod and calibrated mic. Sometimes I think these companies really just take advantage of us.
@@TechnoDad
I have that same Anthem MRX720 also and love it. The tripod, mic and ARC all feel and work really great.
You can't configure a 5.1 or 7.1 setup on this pre/pro? Really?
Oh, you totally can.
Do you know ,whether the av 8805a heat issue, i have heat issue, could you tell a solution to resolve the same
Is it safe to say the review for this is never coming ????
I still have it, but I have others in the same price range. I was thinking of doing a comparison
Considering no amps unit should be half that costs, Rip of.
Damn now I have to play space invaders 🤨
New Track #6 is ok.
So are those connections better then just your Standard wire plug ins in a normal avr?
Yes XLR connection’s are balanced RCAare unbalanced
@@bedroomcinemaguy5568 so I’m guessing the signal is much much better then your Standard wiring.
@@Lowkey_nxthxn yes
@@bedroomcinemaguy5568 I have n outdated onkyo TX-NR686 had it for 4 years now plan on replacing it with the Yamaha 3080 model. I definitely can tell when I upgrade it’s gonna be a night and day difference between the old onkyo model I have. But onkyo has definitely lasted a very very long time since I had there av receiver. I have another onkyo that’s like 10 years old I can’t wait to hear the difference when I upgrade my Onkyo TX-NR686 with the Yamaha
Your keeping it after those magic beans take affect
New intro
Hi ! I have 7.2.4 ...4 speakers up top and the main 5 plus 2 speakers for the surround back ...if i dont set up a voice of god speaker....can i still listen to dolby atmos movies in the Auro 3d mode ...will it do the up mixing even if i dont have the voice of god speaker So you have to connect your top speaker to sub pre out 2??? what if you have 3 subs and using both your pre outs for your subs ..you cant have a top speaker then ...which to me is stupid
Hi! Yes, you will be able to run Auro-3D without the VOG speaker.
@@TechnoDad thanks
You really got to do at least 7.2.4. Forget that auro crap. You have gotten this far and missing the rest of the setup.
Lambo engine with no shell 🐚
I can't go with 7 ear level speakers in the living room. And why would I forget Auro-3D? It's far superior to most Dolby Atmos tracks.
Let the hate for AVRs flow through you GOOD GOOD ....welcome to the darkside !!! 😂😂
😂
I love your vids but with this vid... Marantz sent you this, you didn't pay for it. Your vid title is extremely misleading. Us TH-cam viewers trust your advice so if you buy a 3000$+ first time item it must be good and if I were on the fence and saw a vid from you about your first processor, it must be good right? You shilled bro. I would have bought it if I didn't watch the vid until the very end when you said it was sent to you. So now it's an advertisement and that means you received payment and that means your trusted opinion is bought/biased. Come on man!!!
Sorry to burst your bubble, Steve. This was not sent to me by Marantz. It was sent by Dreamedia Home Theater - 0:48 - I did say it again at the end of the video. I also stated that I would keep it if I liked it and in the three months I've had it, I've gotten rid of my Denon X6700H and picked up the AV7706. With all the work I've done making over 700 videos here on TH-cam, I have the luxury of trying out equipment before I decided to buy it. That being said, is it a huge imporvement over the AVR, I don't think so. It definitely runs cooler thoough...
Nice vid on an expensive amp.
yea, sorry, but a 3k$ amp and it only has 1 8k hdmi in (Not really future proof) and no amps, sorry, I will have to say not worth it.
Oh, and since it does not have any amps can you call it an amp or should you call it an expensive 4k input switcher.
I'm guessing you are not a glass half full kind of guy?🤣😭
@@keepingupwiththejones2933
nope, done wasting money on high priced junk.
@@astrogazer1818 you need to do whatever it is that makes you happy.
It’s Called a Pre-amp/Processor. Yeah, they could add another HDMI 2.1 port but that’s not a huge deal as nothing 8K is coming for a while. With these types of devices, it’s about the sound.
You do know the difference between a reciever and a processor right?
I have a 7704. It failed in 3 years. Marantz buyers beware. Just replaced with an Emotiva. My second series of Emotiva after I got some Marantz equipment. The Emotiva never failed.
Thanks for the tip!
you are cool
DO YOU USE BLUETOOTH on MARANTZ?? man, I've got myself a AV7705 and really, I just can't understand how folks in 2020s still produce any system WITHOUT a Bluetooth button on it. just a note: the old version AV7705 will NOT (N O T) offer you a BLUETOOTH button on it. That means if you pair anything to it, it WILL NOT (N O T) recognize your paired (cellphone, etc) automatically. you MUST (M U S T) have the AV7705 remote control and press the Bluetooth button on it; then it will find your paired cellphone (ETC). So, if ANYTHING wrong happens to your remote control, that signifies = you wont be able to use your MARANTZ / SPEAKERS / BLUETOOTH. a m a z i n g. unbelievable. Next time I'd buy anything from Marantz (or any brand) will be first : "does it even has a bluetooth button on it?". DOES THIS AV 7706 have bluetooth button on it (of is it only on the remote control) ???
Hi! I actually have never pressed that button. When my wife wants to play Pandora from her phone, she taps the cast icon in the app and then Airplay & Bluetooth and then selects the Marantz. Then the music plays through the Marantz.
@@TechnoDad well, for whatever reason, my cellphone & Marantz would NOT pair at all (I tried for 2h). I tried everything possible. Marantz would NOT offer any way possible to activate the "Bluetooth". I gave up for that day. But then, everything worked as usual the next day as though nothing happened.