A Marantz Processor That CONTINUES to Impress Me | Marantz AV7706 Review
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- The Marantz AV7706 has been my daily driver in my home theater for the past 5 months and it STILL continues to impress me with it's performance. Check out the Marantz AV7760 here - amzn.to/2SNI54R
Marantz Processors:
Marantz AV7705 - amzn.to/3niGRIU
Marantz AV7706 - amzn.to/2KhwOoU
Marantz AV8805 - amzn.to/3yW1sZO
Marantz New 2020 AVR's:
Marantz SR5015 - amzn.to/3berw7g
Marantz SR7015 - amzn.to/3l9NWLr
Marantz SR8015 - amzn.to/3aNw8ks
More Marantz AVR's
Marantz SR5012 7.2 4K Receiver - amzn.to/2KzwrBQ
Marantz SR6012 9.2 4K Receiver - amzn.to/2rmyY9B
Marantz SR6014 9.2 4K Receiver - amzn.to/2NHvj3b
Marantz SR7013 9.2 4K Receiver - amzn.to/2PA6Ijc
Marantz SR8012 11.2 4K Receiver - amzn.to/2jvNV61
---------
Videos You Might Like:
Marantz SR8012 Review - • Marantz SR8012 11.2 Re...
Marantz AV7705 Review - • Marantz AV7705 and Emo...
Audyssey XT32 Setup - • Audyssey MultEQ XT32 S...
Processors vs AVR's - • Marantz Processors vs ...
----------
Ways You Can Support:
Patreon: / youthman
Youthman Courses - www.youthmanco...
Youthman Merch - teespring.com/...
Follow Us:
TH-cam: Subscribe to this Channel: goo.gl/YEJ23p
Youthman Crew Facebook Group - / youthmancrew
Instagram: / youthmanreviews
Twitter: / youthmanreviews
Website: youthmanreviews...
_____
My Home Theater Photos & Videos:
Theater Room Video Tour- • UPDATED 7.2.4 Dolby At...
Custom Cabinet Build Thread - imgur.com/gall...
7.2.4 Dolby Atmos Build Thread - goo.gl/YShhGf
High Res Photos - imgur.com/gall...
My 7.2.4 Dedicated Home Theater System:
Speakers:
(3) JTR Noesis 212HTR - bit.ly/JTR_Noe...
(4) Klipsch RS-62ii - amzn.to/2ET4R2w
(4) Klipsch CDT-5800-C II Atmos Speakers - amzn.to/2P4PdEZ
(2) JTR Captivator RS2 Subwoofers - bit.ly/jtr-cap...
Video:
JVC DLA-NX7 Projector - amzn.to/3imLm3l
150" Seymour Center Stage XD Cinescope (2.35:1) Acoustic Transparent Screen - seymourav.com/s...
Pioneer UDP-LX500 - bit.ly/2GwGZly
PS5
Audio:
Marantz AV7706 11.2 Processor - amzn.to/39PAg4i
Monolith 11X Amplifier - amzn.to/2VB4CAg
Theater Seating:
Valencia Tuscany - bit.ly/valenci...
Valencia Console - bit.ly/valenci...
Lighting:
Lutron Caseta with Hub - amzn.to/2V1vp9n
CB Concept SMD5050 LED Lighting - amzn.to/39LpmtG
Misc:
Harmony Elite Remote with Harmony Hub - amzn.to/326SnNT
XLR Cables - amzn.to/3577Mk6
Orbi Wifi Router - amzn.to/2V227rh
Sewell Banana Plugs - amzn.to/2wu1Y5J
14 gauge Speaker Wire - amzn.to/2HGf1mJ
Videos Referenced:
Valencia Tuscany Theater Seating Review - bit.ly/valenci...
Valencia Oxford Theater Seating Review - • Home Theater Seating w...
JTR Subwoofers - • Home Theater Subwoofer...
Marantz AV7705 Review - • Marantz AV7705 and Emo...
Pioneer UDP-LX500 Review - • Pioneer UDP-LX500 Revi...
Monolith 11X Amplifier Review - • Monoprice Monolith 11X...
_____
My Home Theater Photos & Videos:
Theater Room Video Tour- • Home Theater Tour with...
Custom Cabinet Build Thread - imgur.com/gall...
7.2.4 Dolby Atmos Build Thread - goo.gl/YShhGf
High Res Photos - imgur.com/gall...
_______
Disclaimer: Affiliate Links are used in the description of this video. As an Amazon Associate I earn from qualifying purchases.
Check out the Marantz AV7706 here - amzn.to/2SNI54R
More Marantz Processors:
Marantz AV7705 - amzn.to/3niGRIU
Marantz AV7706 - amzn.to/2KhwOoU
Marantz AV8805 - amzn.to/3yW1sZO
Marantz New 2020 AVR's:
Marantz SR5015 - amzn.to/3berw7g
Marantz SR7015 - amzn.to/3l9NWLr
Marantz SR8015 - amzn.to/3aNw8ks
More Marantz AVR's
Marantz SR5012 7.2 4K Receiver - amzn.to/2KzwrBQ
Marantz SR6012 9.2 4K Receiver - amzn.to/2rmyY9B
Marantz SR6014 9.2 4K Receiver - amzn.to/2NHvj3b
Marantz SR7013 9.2 4K Receiver - amzn.to/2PA6Ijc
Marantz SR8012 11.2 4K Receiver - amzn.to/2jvNV61
_______
Disclaimer: Affiliate Links are used in the description of this video. As an Amazon Associate I earn from qualifying purchases.
Thanks. I have corrected it
@@Youthman buddy , you are the guru when it comes to this stuff , I had the sr6013 and thought it was great but wanted to get a processor since I dont use the amp on board anymore , I broke down and got me a xmc-2 emotiva and it sounds great BUT marantz spoiled me with the user interface and everything is just ergonomic , my new emo i paid over 3g is superior in sound but I cant live with the thing , you think I will be happy with the separation with the 7706 coming from a sr6013 you think its a huge improvement ?? , how far off from a xmc-2 , have you had a xmc-2 in yet? I did allot of homework and thought I would love this thing , I like being able make changes lower db per channel from movie to movie while watching the movie and not that you cant on a emotiva but if you want to lower the center sub because you have a amp for transducers you have to stop the movie to go into the system to play with that . I dont want to have to settle just because I want better HT sound or sound in general. im so frustrated right now cause I just came to the realization I have to return this thing for something else , once I think Im done with Marantz it pulls me back?
I like Emotiva but the RMC-1 I reviewed was super buggy (which isn’t common for Emotiva). I prefer the rock solid performance that Marantz provides.
This pre/pro is by far the best for the money. I haven't bought it yet because I'm a few dollars short and I'm currently running a Marantz AV8801. Yeah, I bought it years ago real cheap but didn't consider it not having the latest 3D object surround formats, like Atmos for example. I was really pissed after finding out you couldn't get a downloadable upgrade either so I was stuck with it. For the money, this bad boy is the one to get for less than 3 grand. The last video I saw was the showing of your home theater. You were running an AVR 8012 with no separates and a pair of five thousand dollar Klipsch speakers. Glad to see you finally saw the light...lol Even with the so-called pre-amp mode, it's still not a separate and the sound makes a huge difference when hearing an AVR and pre/pro side by side. Years ago I was big Denon fanatic and I finally broke down and bought separates, starting with 8801. When I heard my first movie the sound was just simply phenomenal. I just wished I had a pair of those Klipsch Heresy, Forte's or La Scala's you own. I bet you're very happy with this pre/pro and your entire home theater.
Rocking the 7706 aswell. Love It. Huge upgrade from my sr8012. Had the SR8012 connected to the same Rotel Amp as my new 7706. And your review is spot on.
Thank you Jonas
@Jonas
Which ROTEL by the way ?!?
Great video! I actually really like the Marantz “porthole”. It definitely gives them a distinctive look compared to other plain “black box” manufacturers. Plus Marantz provides a full digital display that can be used by simply leaving the door open. Best of both worlds to me. Thanks again for the great content YM.
Thank you
I upgraded from the AV7702 to the AV7706 because I ordered the Sony 5000ES Projector and an XBOX Series X, coming from a Sony 65ES and XBOX One X. Waiting on the projector obviously, but from an audible standpoint, I was instantly impressed with the AV7706. I honestly did not expect to get that big of a lift.
100% agree that reliability is paramount, for me at least. When I sit down to enjoy music or a movie the last thing I want is a problem. I am getting rid of my current pre/pro for this very reason, even though it is only about 6 months old. My new AV7706 will be here later this week.
Mine is getting installed right now 👏👏👏👏
Whoohoo!
I think Marantz is great, my sons bought me a used AV 7005 for my 60th Birthday and I Love it. It definitely improved the sound of my system .
Awesome and congrats on the upgrade!
I have the 7705 and I love it. Great sounding unit! Nice review.
Thanks!
Big fan of your videos - I see many different AV channels and yours is by far my fav. Thank you! I just bought both this AV7706 and the Monolith 11x for my Klipsch Atmos setup (7.2.4) - literally yesterday watched the first 4k Blu-ray "Ready Player One". Watching it on my last Marantz AVR SR7011 was good, but watching it with this AV7706 and Monolith... OMG!!! It's exactly how you and your friend described it. My couch became very much in the center of the action with every speaker having its own voice, loud and clear. And the dialog in the center channel was much more clear. Stunning! Not cheap, but Atmos has been rather "Eh" for me for the past 6 years. Now I finally get it! Seems to only really make sense with separates, otherwise the Atmos effect is pretty rare to actually notice in movies. At least that's been my experience.
Thank you for the kind words Chris. Sounds like you’re really enjoying yours as well. Have a blessed week
Exact set up Im shooting for
👍🏿 well said! I got my 7706 little over a week ago and I love it.
I finally went for separates after owning Denon Receivers for over 15 years and so glad I bought the Marantz AV7706 for the past 3 months now. Extremely happy with it with better separation and detail. I also have a 7.2.4 set up and using a NAD M28 7 channel amp to run my Def tech Mythos speakers and Outlaw 5 channel amp for my Atmos speakers.
Glad to hear you’ve had a similar experience with it.
Hey Vava, would you mind sharing your impression about NAD M28? Vs what you had before. Sound signature, etc. Thanks in advance!
@@raphaelmeillat8527 NADM28-It's got lots of power on all 7 channels, quality and a truly devastating dynamic. IMO, it's got a balanced signature after calibration and some tweaking. It is expensive but I believe it's worth it. It could really make a big difference especially if you have large rooms. I initially purchased the Denon X6700H 8K Receiver but returned it after 2 weeks since it's lacking power and details. Good luck!
@@Bullybeef972 thanks a lot for your response. Very much tempted by it. The thing is, my room is rather modest for a home cinema (4.5m x 4.25m, or about 15 ft x 14 ft, that's slightly less than 200 squared feet, 7ft high ceiling) so I guess I'm wondering whether such strong and clean power will be noticeable vs traditional integrated receiver. That's my big question! Any thoughts?
@@raphaelmeillat8527 With your room size, you can still hear a big difference in separation and quality of the sound. I believe once you go separates, you can't go back to a traditional integrated receiver. You can buy less expensive amps like Emotiva, etc...just depends on the type of speakers you're using as well. Just check their return policy that way if you're not happy, you can easily return them and try a different one that suits your needs. You won't regret going separates, that's your ultimate goal if you've been using receivers for awhile. If you have the money, I'd definitely invest in it. Like they say, Buy once, cry once, lol. Cheers!
Hi, I too have the 7706. I bought it right after seeing you video with your neighbor. I love it. Please, keep making videos about the 7706. To me it's crazy $2,599 is low end.
Awesome review my guy!! I was wanting to hear feed back on 7706 vs 8015. You're the man bro!!
Glad you found the video helpful.
@@Youthman I'm upgrade avr, 6700 or sr8015? Please advise....
Sorry, I read your comment too fast and didn’t see your question. My friend and I recently compared the SR8015 and AV7706 and both of us noticed a significant improvement in sound with the AV7706 - th-cam.com/video/xYACtM54_kc/w-d-xo.html
I am ordering the just released Marantz AV8805A so excited
Congrats! That looks to be an incredible unit. I have an affiliate link to it in the description if you decide to order the 8805.
Great video. I have the SR6013 now and am upgrading to separate amps and need a new processor. I looked at the Yamaha but after your review I'm sticking with Marantz. I have a 7.2.4 so this pairs perfectly. I do not think the 8805 does much more than add 2 more channels which I do not need.
Yay! So glad to hear Marantz has no plans to ever change the way their main line of electronics looks. What a crappy idea.
Do you know there are third party companies that even model their own equipment after the Marantz design?
I just startet my "new and improved" journey. Bought a Marantz 8805, 13.2 pre-amp along with a Marantz 8077, 7 channel power-amp. No Atmos power or speakers yet. The upgrade from my previous Onkyo integrated amp is huge. And that´s even with my old speakers.
I love my Marantz 7705 with the monolith x7 200 watts it’s very simple to operate, very nice video
Thank you Sami
I agree with you on the porthole. While I do understand and appreciate heritage, it's definitely time for a refresh. For my money, Marantz would also have to ditch Audyssey in favor of a more robust solution such as Dirac Live. Audyssey might be fine for Denon but Marantz deserves better.
A lot of guys have asked for Dirac Live. I’m guessing the license would jack the price up
Great job Youthman as always! I follow you and the Daily HiFi regularly looking to upgrade soon. Thanks for all that you do. God bless!
Thank you Milton have a great week
Another great video... Now that you're using a processor, any thoughts how the AV7706 would compare to the older AV8802A, and do you think you could ever go back to a receiver?
Great video Youthman and I love the shirt.
That's interesting you heard a difference between the 8015 in pre-amp mode and the 7706. I also would've thought they would perform the same. Although you are gaining XLR out with the 7706.
Very interesting indeed. Audioholics said the 8015 measures extremely well as a preamp.
Yea i read
Somewhere
Else that that the 8015 measure so much better in pre amp than the actual pre amp, then you have gene saying the yamaha rxa6a measure’s significantly better than his 25 thousand dollar storm audio processor, yeah ok whatever im really sure theyr not paid to say this crap to line their own pockets with dollars
I share my personal experiences from a consumer’s perspective. I’m not an engineer and I certainly do not claim to be an expert.
When I do get paid from a company, I always state the video is sponsored or that it was made possible by that company. There are plenty of content creators in this space that have rarely, if ever, state a video was sponsored, even though sponsorships are a big portion of their income.
At the end of the day, my recommendation is to do as much research as you can and make the best decision with the information provided.
Thanks for the review! I have the SR6012 which I have loved and serves me well. As a lover of this tech, I am always looking for the next step up. The 7706 likely be a really big step for me. I currently run a 7.2.2 setup. I considered maybe the 8015 but wonder how much I would gain other than maybe power and a few more channels.
I’m not sure you will hear much difference between the SR8012 and the SR8015, same between the AV7705 and AV7706.
Hey guys...I will help you with BASIC setup (remember everyone's setup/system is diff but this worked for me). I was about to return it cuz it wasnt working until... 1st Make sure your amp is set up to your kind of cables. My Monolith Amp has a selector switch on each input. RCA or XLR. I had to switch to XLR cuz I originally had my old AVR setup with RCA converters but then went to XLR with the 7706. Next, you have to put your HDMI cable to ARC(preferably)on your TV and the other end to the Marantz "HDMI OUT MONITOR 1"(top right in the middle of your facing the back of the unit). That will enable your Av7706 to talk to your TV. It sounds counterintuitive cuz a noob like me thinks a TV should plug into one of the 7706's HDMI inputs but its the only HDMI cable/connection you need to get started for the above mentioned ports. Now power on your TV and 7706. Your TV should prompt you to the Marantz setup screen on your TV(its ps2 quality unfortunately). Go through the Setup wizard if your a noob like me. There will be a speaker test so if you dont hear sound out of each channel when prompted, something is wrong with your wiring setup. If setup is done correctly you might not still have results like me. You might have to select your TVs input to AV receiver. Then, it finally worked for me. I'm a noob but this worked for me. Final thoughts.... you cant just plug everything in and have it work. You have to go through the setup software on your TV and 7706. Hope this helps.
Nice video Does it support 11.1 auro 3d or 10.1 auro 3d like Marantz SR 8012? I mean 7.1.4 auro 3d not 5.1.4 +vog like sr8012 ?
The port hole on the front is a Marantz signature. So no, Marantz… never get rid of it please… 😂
Yes that’s what Marantz said.
Quick fact #1 Audyssey in Denon/Marantz processors/AVRs will downsmple anything to 48kHz
Quick fact #2 Audyssey in Denon/Marantz processors/AVRs cannot compensate for speaker-to-speaker distance greater than 20ft.
Quick fact #3 HEOS in Denon/Marantz processors/AVRs cannot load more than 300 songs into the playback queue.
Should I continue?
We want more
Great product for sure!
I do hope to go with the upgrade to the 8805 with my next system.
Wow! The 8805 looks to be a beast
Mark Nelson , it is worth it I got one Hook up with 2 marantz 8077 power amps using only XLR‘s even my 2 svs pb400 subwoofers , are connected through XLR‘s , and the sound is out of this world
@@2081calin Sounds like we have similar systems and yes they sound amazing. I have a friend who has the 8805 and there is a noticeable difference in quality. Granted he did pay for it but it is better.
Hai Hello, should i buy Marantz 7706 pre or Avr 7015 ,one more dought is there is the 7015 pre out Rca output will equal to 7706 pre outputs.. both pre sound outs will give same or no?? Pls ls reply.
Whenever I use airplay for audio and I scrub or skip to another track often the speakers pop. Do you experience something similar?
I have been using the SR7012 for my surround sound and I do run external amps for LCR channels. Doubt I will move to a processor anytime soon but I have liked my Marantz and probably will stick with the brand for HT in the furtue.
I was very pleased with my SR8012 and also the SR8015 I reviewed. The 7012 should provide you with many years of enjoyment
I have finally gone for AV7706 and cant wait to have them all hooked up. Hopefully the difference from Denon 4500H to Av7706 is day and night
Congrats on the upgrade.
As you said I also have only one issue which is when I boot up everything (Epson 4k projector + 7706 + Monolith amplifiers), I don't get sound. I have to turn it off and on to get the sound.
Do you know how to fix that issue?
My AV7700 is still going great after years of service. My only complaint is the flip down front door, you cannot read that small round screen from your seat. Right now I cannot run video thru the unit because the 4K is not up to date so I just use it for audio. Would I purchase a new version, yes.
I’ll take it off your hands
But with an eARC TV the SHARC can let it pass full lossless audio
I run two Marantz AV7705’s in two different systems. I like the channel separation / aesthetically pleasing and clarity. As far as the porthole, who uses it as you use the onscreen menu? I am not planning on doing any upgrades.
Also have a 7705 and love it. Fully agree with you about the “on screen display”. I use the OSD 99.9% of the time.
I’m still unsure why Marantz chooses to include it.
@@Youthman hi Youthman, do you still have your 7706? Or did you get something new in your set up?
Great video Michael. And I'm with you, that porthole looking thing feels a bit tired to me. Used to like it but there're much more attractive looks nowadays... However, sounds like many people still like it! To each his/her own!
Exactly Raphael
Is this a significant upgrade spund quality wise vs the olde AV7005?
Can you tell a difference between the Marantz AV7706 and the AV7705 in regards to sound? I’m in the market for a pre-amp and like Marantz, but don’t want to break the bank. I’m even willing to get a AV7704 as long as it can do ATMOS
Another great video!
Hey Youthman - love the videos. I'm torn between a Denon x6700h and the Marantz AV7706. I have 2 Adcom 5 channel 125wpc ext amplifiers, but with the Denon I get addition few channels and option to use internal amplification for a 2nd and 3rd zone. My 5.1.4 home theater will be completely run by my ext amps. Do you think there is a significant difference between AV7706 and X6700H with pre amp mode? I can always get a separate cheaper AVR for other zones but not sure if the differences will be enough to have to go through that. Thanks!
I am in the exact same situation - currently have the Denon 6700h, but really considering the Marantz AV 7706. Did you get a chance to try both of them? If so, what is your experience so far? Thank you
I can only speak for the differences we heard between the Marantz SR8015 and AV7706.
They could do a flip down panel, where the panel has the porthole, but when you flip it down, it not only gives access to extra ports and buttons, it also reveal an entire full size (perhaps touch) screen!
If I’m not mistaken, certain samsung smart phones had foldable wallet like cases where it had a cutout to display time/caller id, so something like that could be used to keep the icon porthole, but also keep it fresh and up to date
is there a BLUETOOTH button on this AV 7706?? (or is it like the old one with a bluetooth ONLY on the remote control?? my huge concern is = if something goes wrong with your remote control you wont be able to use your system with a pair bluetooth source, PERIOD. )
I’m thinking of adding the av7706 to my system, I’m using the denon x4700 as a pre amp. Would I notice a difference in clarity and separation with the marantz over the denon
with my 7706 and Sony tv if after powering on the processor and the tv if i don't turn on the tv from the remote immediately no sound comes from my speakers. i have to hold down my tv power button and restart it. its only with marantz. if i put my old Sony avr in its place it doesn't happen.
Are you using ARC? Since I have a projector, I have never used ARC.
Good review! I have a question ... you have Monolith 11x but here in Europe it's not easy to find it. What amplifier do you recommend to replace the Monolith 11x other than Marantz?
Last question... Would be this AV7706 a good/perfect option for music in stereo/surround?
Thanks in advance
I’m not sure what amps you have available in your area. Monica XPA 11 is another solid amp. I have a review of it on my channel.
Parasound are fantastic but you would need several and they are much more expensive.
Very happy with the AV7705.
Absolutely! It’s a fantastic processor as well
I totally agree Marantz need to Dump the port Hole , its is usless
I would like to have robust AVR with Amp to hassle free cables and connections also minimizing automation.
I have one, with an emotive 11 ch amplifier, klipsh speaker, and 2 pb 2000 pro. what a setup, even i think my center R34C is a little small.
Great video as always hope family and you are doing very well...chow
Thanks blue flame. We are doing great. Hope you and your family are doing likewise.
Good video as always
Thank you Victor
Hey brother. Good review! Did you ever get a change to test out the SR8015? Thinking about either this pared with a marantz mm8077 or the SR8015 a as all in one...
Just found your other video 😁 thanks dude.
Yes I have 3 or 4. Ideas on the SR8015. Fantastic AVR
Just listened to your entire podcast av receiver vs separates and really enjoyed it. Gave me a lot of food for thought... @@Youthman
Great video. I’m debating whether to purchase this or bite the bullet on an Anthem AVM 70. I currently use a DenonX4400H as a processor on my 7.1.4 setup.
I can’t speak for the AVM 70. Still waiting to get one in for review
Is the monolith HTP-1 better in the sound department?
What about dac, have they change it in the new AV7706.. Akm factory burnt down. The AV8805A got an ess dac now..
You can set as height channels top middle too or there are options just for top front and top rear?
am I the only one who prefers the look of the Denon x series to the Marantz AVR's. I did look at the Marantz before I decided to go with the Denon x4700h but the look of it put me off.
Nothing wrong with preferring the style of Denon. We all have our different preferences.
@@Youthman what do you think about running the Denon x4700 as a pure pre amp vs the 7706? I have the Denon with emotiva XLA D3 for fronts and basx 7 for surrounds and 4 Atmos heights. I’m not really sure I hear the difference with running the Denon in pre amp mode and using the internal amps lol
I had the same experience with Marantz SR8015 internal amps vs preamp mode with external amp.
I did not expect to hear a difference between the SR8015 in preamp mode with external amp vs Marantz AV7706 with amp but we definitely did. th-cam.com/video/xYACtM54_kc/w-d-xo.html
Hi ! Now that you have had this processor for over a year how would you compare it to Anthem room correction and Arcam room correction Dirac live I did see a pod cast where you guys were talking about room correction and TD placed Dirac Live as #1 Anthem room correction #2 and probably Marantz room correction #3 ...now Mac Intosh also uses Audyssey .... ? I live in Canada and was thinking Marantz ...now my cost with tax will be about $4700 for the Marantz and Anthem $5000 with tax and the Arcam av41 about $7600 tax in...now the Marantz is the only one that is offering a phono input and a Tuner both items are a need for me...and to spend more money on the Anthem and Arcam and not getting what i need is fruitless for me... So do the Anthem and Arcam sound that much better to justify the cost with their room correction systems? ...
nice review man. thanks
Thank you Kris
hello Pal. can you review a high end processor? im ready for a new processor .i have the yamaha preamp cx 5200 at present. they have just released their new high ends stuff.but im thinking id like to move up to maybe a 10 grand processor.my query is much better does a 10 grand processor sound more than the " normal stuff " marantz , yamaha ,denon etc. can you review one? cheers
do you think the marantz 7706 is better sounding than denon x6500h 2018 model?
I’m not certain you would hear a massive difference. I would go with the one that fits your budget and has all of the features you need.
Michael, would you recommend the av7706 over the emotiva rmc-1? Going to be purchasing my first pre-processor next week or the next. Would be nice to know your opinion. I’ve seen your review on the rmc-1 however is there a big difference between the two. As always thanks!
Both sound fantastic. The RMC-1 was just WAY too buggy when I reviewed it. The AV7706 has performed flawlessly.
Thanks for the fast response. Software aside do you think there is a clear winner in sound?
No I do not see one sounding significantly better than the other.
Thank you much!!!
What's the type (optic fiber, active with repeater, regular) and length of your HDMI cable from processor to projector? I am having trouble sending stable 4K/HDR/60fps due to the distance. Thanks.
I have a 40’ or 50’ Monoprice Fiber HDMI cable. No issues other than a few times.
My guess is it was an issue with the PS5 that has been fixed with a firmware update as I haven’t seen it happen in several months.
This video might help th-cam.com/video/-khK6cCq9Gk/w-d-xo.html
I like the porthole design, but I also want to know what decoder setting is active without having too see it on the TV/on screen display.
Is the Audyssey setup similar to Denon where it would set the wrong speaker crossovers?
Really enjoy and appreciate your reviews. Any chance you’ll be reviewing the Anthem AVM-70 in the future? Would love to hear your thoughts on how it compares to your Marantz AV7706. Thanks again for all the work you put into your videos!!
Shane put it well in this event video, we’ve alll requested to review them from Anthem but Anthem isn’t communicating with reviewers.
th-cam.com/video/MAVg7wHjDZ8/w-d-xo.html
I was actually in communication with Anthem many months ago when they first announced their new processors. Their PR guy said he would be glad to send me the AVM70 to review once he had one in stock. Then crickets….No emails, no replies, nada.
@@Youthman Thanks for the reply and link! I understand their prioritization on fulfilling customer orders first, especially when supply is constrained. Hopefully, as the semiconductor shortage gets resolved, they’ll be more open to sending out review units. Hard to say no to free marketing!
So what exactly is best for sound u suggest
Would the difference in the sound be due to different DACs?
Is the 7702 still a good buy in 2023 ??
9:48 - surely the idea (especially with e.g. Atmos) is for the speakers to disappear, such that you hear the content in the "space" not in each speaker?
For a 7.2.4 Klipsch 8000f what amplifier do you recommend?
Im going to buy a processor and leave the power for the amp
I love my Monolith 11X. PLENTY of power for an 11Ch system. Check out my review here - th-cam.com/video/4pSsEtoutJc/w-d-xo.html
@@Youthman Thank you! I’ll buy it + watching the review now.
@@Youthman Monolith 11X is alway out of stock....extremely hard to find.
It was back in stock not too long ago but as soon as they come in stock they sell out pretty quickly
@@Youthman truth. I got a monolith 9x a few months ago. They sold out literally one hour after I bought mine. Lol
Hello Mr.YouthMasta!!
I bought the 7706 and yet to set it up. Now my situation is that I had 4 Atmos speakers installed up on my 20’ ceilings and 2 more up above the Tv to like height speakers. With 7 speakers ground level that’s 13 and not 11 should I sell the 7706 and get me a 8805? Or is there a way to set up close enough to make it sound “Awesome?!” Apréciate your response and keep doing what you do!!
Thank you for the kind words Eddie. Unfortunately, the 7706 can only process 11 channels so your front heights would not be in use. If you want to use 13 speakers, you would need a 13ch AVR or Processor.
If it were me, I would not connect the front in ceiling speakers that you have above your TV and see how it sounds.
Without seeing your room, those speakers may not be able to be heard because they’re not aimed at your listening position and could be too far forward in your room.
Front height channels are typically wall mounted and angled down at your listening position.
Hope that helps
Appreciate your response! And keep making them educational videos, love them!
Tone Winner makes pre pros AT 300 16 channel ...try it out It does not have 2.1
I saw on the back of your marantz receiver you had two different sets of inputs for height speakers one of them being RCA I was wondering if you tried using them and how? I have a entry level Denon receiver and it has the regular 5 banana plug/speaker terminals and right above the subwoofer preout is a red and white RCA ports with height/ rear surround above them. I'd appreciate any tips to using them for front height speakers thanks in advance.
Those channels can be configured in a variety of ways. I use them for height 1 (my front Atmos speakers) and height 2 (rear Atmos).
You can use them for Zone 2 speakers and even for bi-amping. You select that under “Amp Assign” in the settings
@@Youthman what do I need to connect speakers to the height speaker labeled RCA inputs on the back of the Denon
Did you receive the HDMI 2.1 fix for this unit? If so how is it?
No, my JVC NX7 is not capable of 4K@120 so I do not have a way to test the device.
I have the AV7706, and ever since they have done updates, now I have audio dropouts and now video dropout and lag, which I didn't have before. I had better luck with my Denon AVR-3500. I am with you the porthole needs to go, put a nice huge display on the front that you can dim or turn it off! Give up the decade look! ;)
Captain James can you elaborate on the video drop out you are experiencing? Over the past month I have begun to have the video go blank, then come back. Sometimes it won’t come on at all until I reboot everything. I was thinking it was my HDMI cables failing but never considered it could be an update with the Marantz. Is this what you’re experiencing as well?
@@Youthman Thanks for the quick response, video goes out when switching on a movie via mostly my Apple TV 4K unit. Never did it before but now it goes blank and I loose audio. Audio starts to go then video, I have Ethernet hooked up via 1gig so streaming isn't an issue. Now using my Panasonic 9000 I don' t get the issue. Using Sony Laser VPL-915ES, Apple TV 4K and Panasonic 9000 4K player.
It sounds very familiar to what I’m experiencing. Mine did not happen until recently after reviewing the Zidoo player. I thought maybe my HDMI cable was the culprit. It’s intermittent so it’s difficult to troubleshoot.
Im wonder if Sr 8015 is better for sound than av 7706 for 2 channel music only
I could t tell you as I’m probably 90% Home Theater and 10% Music
Does HDMI output 2 support hdmi2.0 too?
Hi I had a SR 8012 and had the same issue when I turned it on, half the screen was red and I tuned it off and on then it was ok. Now I have upgraded to the 8805 prepro it been ok 👍 so far, I think it’s the it a Marantz issue. As I tried several new HDMI cable’s with the same results
Yeah I’m not sure. I haven’t seen it probably in the past few months so maybe they resolved it with a firmware update
Thanks for the review. You are fair in your qualification, but using pre outs on a Denon AVR is a better option, especially because Denon is cheaper and objectively performs better.
A few years ago I reviewed the Denon 6400 and also the Marantz SR8012. I didn’t hear any difference between the two for movies.
I did recently compare the Marantz SR8015 and the AV7706 and both my friend and I heard a significant improvement with the AV7706 - th-cam.com/video/xYACtM54_kc/w-d-xo.html
Does it need an amplifier?
Im Marantz fan too.. had AV7706 and also SR7010 before. Im also had JBL Synthesis SDP55. Compare them, i more love what JBL Synthesis offer, its was new experience when i listen to the JBL processor offer. Marantz sound good, but JBL with dirac sound more quality and transparent.
And yes the JBL had few bug which had been fix with firmware upgrade.
I haven’t heard the JBL Synthesis but at over twice the cost of the AV7706, I would surely hope it sounds better.
@@Youthman my experience with processor that using Dirac had several bug, i still do love Marantz and keep them for my second setup. Thnks for ur reply.. hope u can make some demo test and gave us some ur valuable opinion about JBL.
Hey Michael, have you had the chance to peek at any of the new Yamaha receivers - RX-A8A, RX-A6A, RX-A4A, and RX-A2A. The higher models have all HDMI input channels in 8K!
I haven’t had a contact for Yamaha but now that I have an affiliate account with B&H Photo, I can review any of the products they carry.
Man 7706 you got for 26 hundreds good deals in Toronto you got to pay 45 hundreds
Love your shirt.
Thanks Jed
You might need to speak about the titan UD9005 adding to your system ... :)
besides 8k why should i upgrade from a 7705 to a 7706
No reason to unless you need the few upgrades it provides.
Hi Youthman! Its been a while since I posted on one of your videos. I am in the market for a new AV Processor and have been strongly considering the 7706 by Marantz and the Anthem AVM70. Have you got your hands on an AVM 70? If so, curious how you like the AVM70 compared to the Marantz 7706?
Unfortunately no. I was in communication with anthem through a few emails, but then it all went silent. They’re not replying to anyone’s emails that I know of. Not sure what’s going on
@@Youthman I called numerous retailers on the AVM70 as well and they are back ordered almost to June. I like you would probably pull the trigger on a new Marantz chassis designed for their whole AVR/Processor line straight away. . Right now the old outdated chassis plus a few obsolete I/O they still have in their AV Processors/AVR's are not needed. Example component video. This is the only reason I am holding off on Marantz. But I agree they are an awesome company and produce outstanding products that are very well built, priced right, and very reliable. I had Arcam for about 17 years. Not bad except the last two models. Their 600 and the 850. Nothing but problems. I have owned a AVR 850 for the past 5 years and it has been in for repair 5 times in the 5 years of ownership. Plus it takes about a month plus turnaround time after each repair. Thus why I want a new AVP. I was considering Emotiva but I think the Marantz and Anthem are my top two choices right now. If Marantz comes out with a new line with new styling and gets rid of some obsolete I/O's I will most likely get it over the AVM70.
I wouldn’t hold your breath on Marantz redesigning the chassis. That has been one thing I have recommended for awhile
@@Youthman Your probably right. I am curious of the Monolith HTP-1 Going to check your review on that and will comment.
The HTP-1 is a very nice unit. I had the opportunity to hear several home theaters they used it in the Wisconsin Illinois Tour.
FYI I'm a Marantz fan. I generally like their products, especially compared to Denon but the DIRAC centred processors IMO put it into a different league. Marantz and especially Audgyssey always made my speakers feel artificial and a bit like tin headphones.. obviously not like tin headphones but that kind of presentation. I also find it wasn't great with speaker timings etc and generally subpar for music compared to other processors I've used (but still far better than Denon).
What do you use? I am a music and movie type.Any help would be fantastic!
Now Denon needs to make a processor. The Marantz is too tall for my cabinet.
Acurus has a MUSE which is a slim processor but it’s a lot more.
@@Youthman only by about 1/2 inch. Been Denon since day 1 and don’t really trust anything else. They are very reliable. If you talk to Phil from Sound United, let him know, we are waiting.
Which one is best marantz sr 8015 vs av 7706 pre processor.reply soon.
Iam your subscriber from INDIA
As I shared in this video th-cam.com/video/xYACtM54_kc/w-d-xo.html, the AV7706. 14 minute reply. How did I do?
@@Youthman thank you so much
@@Youthmanpre processor are av 7706 very much details produced compared to. Sr 8015
did you watch without remorse it has got great bass and nice surround
I'm new to this, what's the difference between a processor and a receiver?
@Richard Santiago
A processor has only one task: do all audio & video processing and sending it to off-board amplifier(s) and display(s). An AV receiver has all processing and amplifying duties into one chassis.
This should help - th-cam.com/video/EAb20tLu_r8/w-d-xo.html
T-shirt is 🔥😁
Thanks, they are for sale - youthman.creator-spring.com/listing/home-theater-bass-hz-so-good?product=46
I'm excited to get mine to complete my new theater, ordered in feb, still waiting...june 8th is the latest estimate, (crossing fingers)
So close!
@@keepingupwiththejones2933 there are supposedly some in stick on amazon but I'm getting mine for a few hundred less and I'd like to keep it that way
@@keepingupwiththejones2933 no......june 28th is now the ever moving goalpost
@@keepingupwiththejones2933 thanks man. Its ok. Can't enjoy it till I move and build out the new theater in August anyway, so haven't really missed it. I just wanna test it so its preventing me from packing a lot of things
good news guys, it's shipped today :)
It is just a cheap promo?
I saw many reviews on Amazon, buyers/consumers mainly disappointed about quality of Marantz's receivers.
Cheap promo? As a full-time content creator, reviewing home theater products is what I do.
I haven’t looked at any other reviews. I’m sharing my experience over the past 5 months with the AV7706. I have other videos on the SR8012, SR8015 and AV7705.
@@keepingupwiththejones2933
I talk about exactly this model -
amzn.to/3uO1hwq
@@keepingupwiththejones2933
Agree.
Appreciate..
I recently purchased this unit having upgraded from a Denon 3808CI AVR. Right now I have paired with the Marantz MM7055 5 channel Amp. Are you still using the Monolith? How would you compare the Monolith with other AMPs you have used with your Marantz pre-amp? Thanks. I am a new subscriber.
Thanks Christopher. I have on several amplifiers over the years and honestly don’t hear much difference between them. And amplifiers job is to amplify the signal that has been given to them by the processor.
seriously whats the deal with processors being so big, as someone who wants to get into separates i dont want to install a server rack in my living room. I wish they offered something like their half sized avr but with just unbalance ports along with an amp at that size. this way everything would fit nicely stacked in the cabinet at the front of the room.
Most people that use separates are looking for balanced connections. The Acurus MUSE is slim but it’s also $5500.
@@Youthman well at this point, im starting to look at them like i do people with big lifted trucks....compensating much
I’m not seeing the correlation. How can a large processor be compensating?
typo in your video description av7760