Oh my Lord you have saved my life. The flatter rollers! The outer track! My children have learned way too many cuss words as they watched me, a tiny 53-year-old Methodist lady, try to hang these @$&%^@ doors. But no more! Thank you for these clear instructions. Appreciate it very much.
Dude like the other people said. I took this type of door down to paint etc. and tried to put it back. I haven't used that many profanities in a LONG time. I lost my mind. The simple things that you explained in the video made it a breeze. The angle of the doors to put them in and the fact that the Glider Goes in AFTER putting up the doors made all the difference. THANKS!
I didn't even watch the whole video, but just the info about the rollers and installing the inside door first let me do in 30 seconds what I had been fiddling with for hours. Thank you!
Thanks dude, you gave me the tip as to what I was doing wrong. The rollers are not identical and different for the front and rear door. Once corrected that, everything worked! Yay!
Thanks, man, for the clear 'n' helpful video! (I'm a musician, BTW, so I can call people "man", though my wife isn't wild about it.) We lost our instructions, and I don't know if I would've noticed the two sets of wheels were different if I hadn't heard you mention it. 😊👍
I personally paint afterwards because the doors can become scuffed during installation. That way I don’t have to paint it again. But it’s personal preference in my opinion.
Here's a link to replacement hardware used in the video www.menards.com/main/hardware/door-window-hardware/closet-bifold-door-hardware/john-sterling-trade-2-panel-bipass-sliding-door-hardware/r-byp-50-2d4/p-1444436979690-c-7593.htm?tid=1416207600907180102&ipos=1
I believe you single-handedlly just saved my marriage. Thank you for this video!!!!
Same!
😂 I swear I just knocked my door off track he low-key showed me how to fix it lol
Oh my Lord you have saved my life. The flatter rollers! The outer track! My children have learned way too many cuss words as they watched me, a tiny 53-year-old Methodist lady, try to hang these @$&%^@ doors. But no more! Thank you for these clear instructions. Appreciate it very much.
I am so with you! thanks so much for this video.
You are cute. Have not done that yet!
Dude like the other people said. I took this type of door down to paint etc. and tried to put it back. I haven't used that many profanities in a LONG time. I lost my mind. The simple things that you explained in the video made it a breeze. The angle of the doors to put them in and the fact that the Glider Goes in AFTER putting up the doors made all the difference. THANKS!
Helpful and right to the point, thank you! I must have watched 20 videos and no one mentioned what direction the hardware needed to go in except you.
I didn't even watch the whole video, but just the info about the rollers and installing the inside door first let me do in 30 seconds what I had been fiddling with for hours. Thank you!
You are the first to explain there are TWO DIFFERENT sets of rollers! I was given 4 of the same and it's been, well,... thank you!
Dude, your video helped me fix what I thought would be impossible. A simple no BS video.
Thank you, So far you are the only person who mentioned that their was a front and back set of roller brackets
Thanks. The tip about which way the rollers go was what I was missing. Much appreciated
Excellent instructions! Thank you very much! The difference in the roller angles was driving me around the bend. Appreciate you!
Thanks dude, you gave me the tip as to what I was doing wrong. The rollers are not identical and different for the front and rear door. Once corrected that, everything worked! Yay!
Thank you darling. I removed the doors, now I need to put them back!!
Thanks man, I don't even want to know the headache I could have had figuring out the forward door from the backward.
Love from Colo, very helpful. My question was roller related, and you answered the question.
OMG thank you! We couldn't figure out the lean and snap in place part!
Thanks for the tip about the rollers!
I've been searching for almost an hour and finally found this video. This is exactly what I need. Thanks so much 👍🏽
This hits the spot . . .for sure. Solved my 'hanging' ineffectiveness, pronto. Thanks D.
Wish you well!
Thanks, man, for the clear 'n' helpful video! (I'm a musician, BTW, so I can call people "man", though my wife isn't wild about it.) We lost our instructions, and I don't know if I would've noticed the two sets of wheels were different if I hadn't heard you mention it. 😊👍
Thanks for the info ! I couldn’t figure out what door went inside vs outside
Thanks man exactly what I needed without all the nonsense! Great video!
Great video. All you need to know in a non-bullshit way. Loved the "Flip Flops" - Part. It is what it is. :)
Brief and to the point
Awesome, thank you!
Quavo drops some heat on some home improvement videos
Excellent video - thanks
Great video. Thanks!
So it's best to paint after the doors are hung?
I personally paint afterwards because the doors can become scuffed during installation. That way I don’t have to paint it again. But it’s personal preference in my opinion.
great video
good video thank you much
Thanks
Thanks..
Which ones are the flatter ones? The 3/8 or the 1/16?
So how did the house turn out..????
Thank you!
Can this track be screwed in sideways facing my face
What about the space provided?
Are the doors particle wood or solid wood?
Solid wood
The doors are solid wood doors
Perhaps or fluted
Can you do this with hollow core doors?
Hollow core doors usually have an inch or so of solid wood so you can make a cut at the bottom.@@Rgnfrazier
How can I fix the bent rail
Replacing just the J bar is the best way to go. It depends where the bar is bent. it could be a challenge bending it back without any other issues.
Here's a link to replacement hardware
used in the video
www.menards.com/main/hardware/door-window-hardware/closet-bifold-door-hardware/john-sterling-trade-2-panel-bipass-sliding-door-hardware/r-byp-50-2d4/p-1444436979690-c-7593.htm?tid=1416207600907180102&ipos=1
Island life goes to the mainland...