Totally worth it, we endurance ran it versus the traxxas high trail and that fusion pro 2300kv motor just keeps going, the traxxas motor burned and this motor totally outdid it. After that even my traxxas is getting a fusion pro
@@febuildsThanks. Our younger one had just a few outings with the car yet - and she is loving it. The car drives pretty decently out of the box, but there definitely is a room for improvement. I will observe it for a little while and if it will keep getting attention, then I will go for the upgrade.
Not really, just as in the video thats all you need. Its just a tight fit(mainly with the wires) if you want to retain the fake engine cover, you can change the pinion but i recommend keeping the pinion gear it came with, then you will get ultra smooth, slow and controlled movement.
@@sinister_xd4889 the hobby wing fusion pro 2300kv uses both 2s and 3s, I run 2s currently in all my Fusion pro builds. If you have the programming card, you will see that it should be set to auto detect by default but its always good to make sure simply by plugging in the motor and the programming card. And checking is setting two is set to option 1. Which should be auto.
![ร้อยพ่อพันแม่ - WanMai [Official MV]](http://i.ytimg.com/vi/XY2pNYASEbg/mqdefault.jpg)
They're a great Trail Truck!!!! the V2 has a interior, the new Dumborc X8 transmitter & body clip ties making it even better value than before!!!! 😉
All ya need is some brass and thing is golden
I am waiting on getting my lc76 I think I’m going to use my stock trx4 shocks that I put 20wt in
Very helpful video, especially on the shocks! We have one incoming - I guess I will invest in that Fusion Pro 2300kv system in the spring or summer.
Totally worth it, we endurance ran it versus the traxxas high trail and that fusion pro 2300kv motor just keeps going, the traxxas motor burned and this motor totally outdid it. After that even my traxxas is getting a fusion pro
@@febuildsThanks. Our younger one had just a few outings with the car yet - and she is loving it. The car drives pretty decently out of the box, but there definitely is a room for improvement. I will observe it for a little while and if it will keep getting attention, then I will go for the upgrade.
Nice video, i was thinking to use fusion SE.do you think it will good enough or you recommend the PRO?
I wouldn’t be able to say because I’ve mainly used the fusion pro’s
The SE is just about the same just alot cheaper bro' 😉Oh it has less tuning options but it does have the FOC 😊
Link to shocks ?
Do i need to change anything when i apply the motor? All of my parts are stock in the rgt ex86190
Not really, just as in the video thats all you need. Its just a tight fit(mainly with the wires) if you want to retain the fake engine cover, you can change the pinion but i recommend keeping the pinion gear it came with, then you will get ultra smooth, slow and controlled movement.
Do i need to change battery? Its 2s right now
@@sinister_xd4889 the hobby wing fusion pro 2300kv uses both 2s and 3s, I run 2s currently in all my Fusion pro builds. If you have the programming card, you will see that it should be set to auto detect by default but its always good to make sure simply by plugging in the motor and the programming card. And checking is setting two is set to option 1. Which should be auto.
Thanks man👍
Size tyres?
1.9’s weighted beadlock rims
@@febuilds what is the outer diameter of the tire?