Professional Laptop Battery Analyzer - LFC
ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2020
- This video is a re-upload from Saturday, see bottom of description for details.
Big thanks to NIP Embedded Systems for sending in this unit, there was a lot of stuff to learn about it that I couldn't fit into a single video. The more I tinker with it, the more stuff I find that I can do with it, and the better my understanding gets.
After shooting this review I had a MacBook Pro in with a suspected failed battery - the battery is glued in, so it's not a trivial matter to swap it out for test. Plug in the Battery Analyzer, and bam, now I can check it in-situ before I go to the hassle of removing it.
Learn more about the NLBA1 here: www.laptopu.ro/product/profes...
Join the new Discord right here: / discord
Support the channel directly at: / adamantit
Follow us on Twitter at: / adamantit
I posted this on Saturday, but de-listed it after receiving an alarming phone call about the device.
However, after taking the concerns into consideration, I concluded that one bad experience doesn't make this a bad product. The issues that I'd been told about have been resolved in the latest hardware revision featured in the video, and I'm satisfied that there's no cause for concern. - วิทยาศาสตร์และเทคโนโลยี
Big shout out to you for the transparency with this re-upload. The honesty and care you give your fans is very much appreciated. And I will follow and support you for those 2 reasons. Look forward to more quality videos. Stay safe my dude. ✌
I just bought one of thes, I did not relise that you need to pay a licnecs fee to use it ?????? EDIT/UPDATE I have just canlled the order. A tool were you need to pay a licnce for it after you bought it ???
Tool and analyzer are lifetime/unlimited.
There is an option for chip programming (not all need it) which is not free.
It is clearly presented on the website. There is nothing else cheaper and better, it’s not like you have many to choose from.
@@TheSpotify95, thank you for the clrification , much apprciated.
Just signed in to say thanks for uploading this video. I watched the Sorin one first, and this was the icing on the cake. Much appreciate your time and efforts for making this crystal clear.
UPDATE: Now NLBA comes with 10 FREE Days for Reset/Unlock/Repair option. Easy to recover the investment. For existing customers, 10 FREE Days for Reset Option can be offered upon request.
Another great review. You explained very well the features of this device. I would like to add some more info to avoid any confusions:
If the battery is in Lock state it cannot be "Revived". If a battery has bad cells then nothing in the world can "repair" the battery.
Steps to repair a battery:
1. Detect the defect (in many cases it is due to over discharged cells) -> NLBA can do it
2. Fix the defect by replacing the cells or bring all cells to the same voltage.
3. Reset/Reprogram the chip to clear the errors (NLBA for the moment supports BQ8030 chip reset and I will add more chips soon). This step is very difficult because all chips are secured. Latest chips have even SHA256 bit.
4. Analyze the cells voltages by measuring the internal resistance and tracking the voltage under load -> NLBA can do it.
Very Handy to Have! Thanks for sharing this with us Graham!
Hey Adam! Just found this video of yours. I bought one of these for work but I've never had time to properly research how to use it. This video is brilliant, I can't wait to get to work and try your tips out on it!
I really got a charge out of your new diagnostics tool as you gave it a battery of tests. I am seriously amped up and I think this is a positive move and a guaranteed sell for this product.
👍😎
Man you're really inspiring. Truth is, there is almost no shop that repairs stuff in my city because we kind of throw things and buy new ones given the high cost of labour but if I had your skills and knowledge I think I'd go all in to make a small computer repair shop. The idea sounds daunting. I hate when I can't fix something and I know it's gonna happen all the time. Thanks for sharing your stuff on TH-cam. Wish you all the best.
maybe you should gather and sell those used batteries in bulk to folks who can fix... I can fix. Sell them to me!!
This tool saved us a lot of time getting over discharged batteries back to life. What is even better, that getting support for every question is easy and fast on their forums!
Got mine! I love this thing. I have like 30 batteries laying around my shop that I have no clue what the status of them are. This tool is super handy.
This is an amazing product. It gives back life to so many batteries that will be otherwise recycled.
I have this device and this review helped me learn even more. If any one is interested it is a great tool and having a database of connection for multiple batteries is great. Definitely worth the money. Thanks Adamant and NIP for a great device and a good information
what, no 20% discount code? lol. great vide btw. appreciate the honesty in the description and the re-upload :)
that's a super-cool tool! Thanks for the review!
Excelente Review, yo sigo esperando la unidad después de dos meses en tránsito espero llegue pronto saludos gracias por su tiempo
I have bought this tool to test my big lot of laptop batteries, about 1000pcs. It helps me a lot to see which one is working and how good it is. You don't need lots of laptops to test the batteries. Just one NLBA and you are done. Version 3.00 is great because it shows Battery Pinout, you don't need to search for clock, data, gnd, system present. I am happy with this product.
Great stuff. Thanks for sharing. Cheers, Nico
I don’t think this product is useful “to us” in its current form. But due to its low cost, I bought one anyway, in hopes it’s future development will yield better capabilities “for us”. I think this device would sell like crazy, if it could write to internal controllers. Replacing cells and unlocking the chip, would be a HUGE game changer. Without that, it’s just a glorified reporting machine IMHO. I’m with Graham, if a battery is bad with a locked chip, why bother. Nothing this device can do. It’s cheaper and less of a headache to just buy new $20-$30 batteries.
There are 2-3 softwares (just software) in the world that could reset/reprogram the chip. They cost up to $1000 per year. Most of the chips are very well secured, that's why the price is high. I will add more chips soon for affordable prices.
@@nipembedded9976 Specifically, what are these programs that cost $600 more than the Professional Laptop Battery Analyzer?
Thanks for another great video! I might have to pick one of those up, I have a super old Toshiba Satellite A40 I want to restore, there I cannot find any type of replacement battery or charger. And come across a bunch of dead batteries pretty often. Thanks for making this video and the review :-) have a nice night or day!
After the video from sorin, I bought this product. A well-made product. Very simple software, easy for everyone. You don't need a specialized technician. Very good communication with support, forum involved. Resetting, calibrating, testing, all with just a few clicks, I recommend it to everyone.
Can it reset or unlock chip
Great video / great that you show mistakes on way as educates everyone if they come across that problem / thank you
In playbook days when you discharged it Right down and it refused to charge even leaving it plugged in overnight a trick called stack charging got the battery up to the minimum enough to charge !basically you plugged in the charger and then immediately out a score or so of times if nothing, you repeated it. It works by putting in a tiny amount of charge at a time until the control board wakes up and charges normally.
Never chuck dead battery packs out its generally a dead cell the rest maybe fine ,i power all my torches with old laptop batteries you just have to use a small pcb charge circuit (from ebay) to safely charge them as the batteries themselves do not have built in protection circuits or a decent charger with overheat protection as bad ones heat up fast!
Hello, I have had this tool since May 2020, I mainly use it for battery diagnosis. In software version 3.0, the pinout detection is also very helpful.
Great review! I so want one!
Great review, very useful!
I bumped into the Fuel gauge stuff years ago (when Laptop batteries were NiMH) and 'talked' to the chips a few times with an LPT interface, one thing I found was that running a few charge/discharge cycles then forcing a re-cal often gave much better results, I wonder if that would be the case with the recovered HP pack?
I'm glad I read the description. I thought I'd traveled through a worm-hole or something! I was about to rush out and get winning lottery tickets 😂😂😂🇬🇧
Yes I was terribly confused for a while.
Wow that’s a pretty nice tool thanks for sharing👍
Once again Great Video.
This is fully worth the price, since I bought this this was very usefull
Well done review!
Very good Product!
Its good explanation of the unit and got my own unit. the unit is good for assessment and testing of a lot of different laptop batteries. This unit has also capability to fix errors on the batteries like locked and wrong cell info.
Best device for laptop batteries and happy to see chip reset option which allow me make and repair old laptop batteries
Mmm 225,= dollar is it worthy for getting old batteries alive.
For that money you can buying several new ones.
But you're explanation is spot on and give us inside information that a battery is not just some cells in a row....🔋🔋🔋
Thanks Graham.
Yes, a laptop battery is very complex. They are built-in microcontrollers that run complex firmware. The device is an advanced analyzer for almost all laptop batteries, not only for old. The latest software version supports the Reset/Reprogram feature for the BQ8030 chip with Sanyo firmware and soon more and more chips will be added.
Great video and thaks for sharing! Greetings from Mexico City.
hi for apple battery what number of resister that you connect from T to G
we just got our device today and after having a fiddle with some batteries we've managed to get a couple of them up and running again. Its one of those tools we will be wondering how we did without it
The website seems to have fallen asleep and isn't responding. Will check it later when hopefully it is back.
Update 3.3.0 worked very well, is better now than it used to be, very good. THANKS
Thanks for the video Graham (must have missed it first time around). I would get one cos it's cool even though I don't have a repair business. Usually on car batteries you connect positive first then negative and reverse when disconnecting. Don't know if this applies laptop batteries though.
I highly recommend this device. no other device in market compete this one.
Great! Enjoyed that one =D
Hi to everyone! I would like to thank the person who design and develop this NLBA device. There is a loot of good batteries out there those manufacturers are locking just to make people spend money! Let us be honest if any of us peasants would do such thing we would go to jail! This Analyser have helped me sort through my battery stock. Many of them turn out to be in great shape. I had completely unresponsive batteries that I was able to awake, charge, grade and I learned that battery that was made in 2008 have 89% life in it and the cells are great having only 22 ohms of resistance…. CRAZY. I think this is so far the best device I bought this year a specially that it was not too expensive. This will be handy every day in my line of business as I resell laptop parts! Thank you! I have no problem recommending that to other people who have knowledge and a bit of common sense…. This will not repair any bad cells as this is impossible - bad cell needs to be replaced but it will do miracles when it comes to good cells that was blocked by so called protection! Anyone who deals with laptops or other electronics that use this type of battery should have this on hand! Period! I only hope that it will be constantly developed, that owner will take on board users suggestions as I bet there will be many and that we can save at least 50% of them batteries going to waist and destroying our planet! Once again Thank YOU!
Does anyone know what camera he uses for showing his bench top? I’d really like to start recording my repairs for easy of putting things back together.
Nice bit of kit, but the biggest problem I have found with laptop batteries is when the control chip renders the whole battery faulty locking it from being used ever again. If this machine will be able to reset locked control chips in the future it will turn it from a handy tool to have into a must have tool.
Right now BQ8030 Sanyo chip can be Reset/Unlocked using NLBA. Soon more chips.
Использую это чудо устройство уже на протяжении месяца . Это самая шикарная вещь которую я приобрел .
Так как очень много батарей после коматоза отремонтированы и нашли своих владельцев:)
Typo in the output report, chemistry is spelt wrong
Love the videos. Maybe you can help me with an issue. Have a a320m hd2 board with a ryzen 5 1400 i cannot get video from it. I have tried reseating the cpu. I have tried different psu different ram. Tried both ram slots with all 3 brands of ram gskill trident z corsair vengeance and some micron.i have also tried 2 different gpus different cables. I have use the clear cmos jumper have removed the cmos battery still nothing. Just put all my money into this and im jist stumped.
That's a great bit of equipment :-D, it also shows the cheap batterys for what they really are.
I have had to jumpstart batterys to get them to talk again, but the case has to be cracked open and power applied.
An odd cell that's stubborn can be charged a bit as well.
Some people use the device to measure the real capacity of the new after market batteries. NLBA has a function that can measure the real capacity of the battery. So you will know exactly how much mAh a battery has. Also Impedance tracker could easily help you to see how good are the cells of any working battery.
@@nipembedded9976 What is NLBA? Care to share, thanks!
@@samcheung4984 It is a Laptop Battery Analyzer.
@@nipembedded9976 Multiple programs already on the market, for example AIDA64 and even some free ones, already give very detailed diagnostic info on laptop batteries. Things like design capacity, charge level, current capacity, wear level, etc etc. They don't show detailed per cell info like this tool though.
@@nicT9 Such softwares like AIDA works only with the battery connected to the machine where AIDA is installed, works only if the battery is good, it shows you only a few basic information. What to do with it in a laptop repair shop ? Think that you can have tons of laptop batteries, to test analyze, create reports (charging/discharging), test cells' condition, revive or even Repair using Chip Reset Option. None of this can be done with AIDA.
Its made in Romania, city near by me, i have this tool, very very handy
Dell D600 battery (C1295) With a jumper between Ground and the SYS PRESENT pin I can measure voltage and discharge the battery using a R/C charger /discharger. However I can not charge at the out most pins. No current flow goes into the battery.
If I put the battery back in the laptop it will charge it full again. Would you know if I need another jumper to allow the battery to accept charging?
well made video
Hi, I have just purchased this device but am having issues getting batterys to read.. any advice?
"Adam" has the best toys😁
You do know his name is not Adam, right? lol. It's Graham.
@@za-se4jv gonna guess from the channel name... Adam ant IT ??? ... IDK. lol.
Sure does!
Thanks man I really appreciate your video was helpful..
But I wish you can make a video on how to connect the uniform short wire of battery connector ,
Like how it can be connected to the socket and batteries too...
Am talk about making connect internal batteries to the device...
Hearing "Batt-Trees" will never stop amusing me.
Do you have a coupon code for this? I am about to buy.
It's such a good review.. I have bought 1 device i got it today i'm already testing and it's good device i hope for new updates mostly RESET part it's much interesting
Great. Have in mind that RESET option is for BQ8030 chip only. You can find the chip in Static Parameters -> Detected Chip Name.
Im fixing vintage laptop and I need to recover it, dont have spare part. Any tips? Siemens Nixdorf 710, 510, PCD-4ND, PCD-5ND, Compaq LTE 5300. All these I have and want to fix.
perfekt work
What an interesting little device! Lots of fun for battery nerds 😆🌱 and for putting new cells into old batteries I imagine. I wonder if it could be put to use to allow LifePO4 cells to be fitted for a less explosive risk (but less runtime) edition laptop?
To use different chemistry requires more steps. I recommend to be done only in a specialized shop.
world no 1 Device and excelent Teem they Developed this and also making Video for us
Whenever I'm doing wiring for a device that is used on a Raspberry Pi 3/4, that uses I2C I use the same colors wires, but I make the yellow wire the clock wire and green is data. I'm going to get one of these battery analyzers, I'll need to save up for it.
This is a comprehensive device. I love what it can apparently do. It should be noted that the hardware and basic, but nice looking, software simply test and diagnose batteries. To reset the safety features of overly discharged batteries, for possible recovery, one must subscribe to their error clearing software to the tune of $200- a year..... Code to twiddle with the bits of TI gauging chips is free from TI.
What a great instrument and software? I'd never heard of it. Can we recharge a battery (i mean when the voltage has got too low that it couldn't be charged by itself) with a power supply only using positive and negative pins? Thank you very much
There are some batteries that can take some current but most of them not. For example Dell uses a special command to activate the charging MOSfet, same for discharging. The charging procedure is complex and must be done according to the smart battery charger standard. For example you must read the temperature sensor, you need to charge the battery with Pre Charge current first then to switch to constant current and after that to Constant Voltage. Also some alarms must be monitored. Anytime a failure is detected you must disconnect the power. Using all these information you could charge a battery let's say to about 80-90% but from 90% to 100% it is more difficult because some batteries require Pulse Charging like PWM other require some sleep periods and so on. It is different from brand to brand.
@@nipembedded9976 You're absolutely a charging expert, thank you.
Learn an important stuffs.. thank you..
Wow, that thing is sweet.
Does the chip inside the laptop battery handle cell balancing? On rc lipo batteries you have a separate balance lead in addition to the power leads that connects on to the smart charger. I wouldnt force charge a battery and leave it unattended otherwise you could come back to a fire
Exactly, the chip inside the battery is responsible for balancing, monitoring the temperature, tracking the capacity and many many other things. Most batteries have an internal let's say "programmable fuse" which could be burned by the chip in case a failure is detected, so no input/output current.
Καλημέρα φίλε μου θα μπορούσες να κάνεις ένα βίντεο για τη συγκεκριμένη μπαταρία 2F8K3 για Dell Alienware 17R1 για το μοντέλο της μπαταρίας αν το μηχάνημα μπορεί να την ενεργοποιήσει και να περάσει τους driver στο cip θα το εκτιμούσα πολύ να κάνεις ένα βιντεάκι για τη συγκεκριμένη μπαταρία και να μας δείξεις η συνδεσμολογία στους ακροδέκτες ευχαριστώ πολύ με εκτίμηση...!!??
Good job I need one how can I get one
Can that analyzer reset a laptop battery that you rebuilt? If you take a laptop battery, replace all the cells, or a few, can that cool tool reset the BMS? Also, can that be hooked up to a laptop to see if the m/b is charging properly? Thanks & great demo of this nice device! 🤓😁 what macbook pro batteries, by battery #, can this test?
After replacing the cells you have to reset the chip. At the moment BQ8030 Sanyo chip can be reset. Soon more chips will be added. The device cannot check if the motherboard is charging properly, but it can check if the battery is working properly so you can deduct if the motherboard is good or not.
@@nipembedded9976 ok thank you. There are literally hundreds of different laptop batteries! 🤓 thank you too, mr graham, for sharing the analyzer
Link from where to order tester?
Very easy to use.
Nice 👍
Last October I bought Tester firmware version 1.10. I use it almost every day from the moment of purchase.
The number of revived battery is high
excelente herramienta
Can you use this tool to rewrite the battery capacity after adding higher capacity cells?
Yes, if the batteries have BQ8030 Sanyo chip. Soon more chips will be added.
@@nipembedded9976 Have you added more chips? Which ones? How common are those chips , as in, are they rarely seen in batteries or covers majority of today's batteries? how much market coverage will we get with current batteries?
@@nicT9 Are you talking about Chip Reset option ? At this moment we can Unseal and Reset about 80-90% of batteries on the market.
I'm wondering if this will work using only a bench power supply, or you need the data connection to the battery aswell? In my experience I almost never was able to recover a dead laptop battery by just trying to charge it with a PSU.
Generally speaking you need to communicate with the battery's BMS (Battery Management System) to charge it. Some badly made batteries will take a charge regardless of the BMS status, but it's not the norm.
The advantage of this system is easy access to the statistics int he BMS though, health, cell balance, etc, which let you make a judgement call on if the battery is any good or spent.
The battery chip requests how it must be charged, what current and what voltage. Charging a laptop battery directly using a lab power supply could lock the chip. More, Dell laptop batteries will not charge without specific data communication.
Will it work with Power Bank battery or Type C or Micro USB connectors without taking out the battery inside? Thanks!
NLBA device works only with laptop batteries.
Good morning my friend you could make a video for this 2F8K3 battery for dell Alienware 17r1 for the battery model if the machine can activate it and pass the driver on
the cip I would greatly appreciate it to make a video for that battery and Show us the connection to the terminals thanks very much with appreciation ...!!???
We need something like this for mobile phone
Please, I have some questions. Does he reprogram the battery ... Does it explain the damaged cell ... Does the device have uses other than the laptop battery, I hope that there will be a complete explanation for the use in a simplified way I need one and how much is the cost of shipping to Egypt
The device contains an advanced laptop battery analyzer. It is simple to analyze and understand what is the problem with the battery. It shows exactly what cells are the problem. You can check more details here: www.laptopu.ro .
cool and informative video, i was messing about with a used t410s battery and lenovo power manager, i managed to increase its capacity by repeatedly charging and discharging it like 4 times, however then i run prime95 while discharging and the battery droped abruptly from like 70% to 5% even tough it worked just fine with a light load, the capacity in power manger also dropped, i was kinda disappointed but something to look out for
Can you try to perform a Full Charge -> Full Discharge -> Full Charge cycle ? Full Discharge is achieved when laptop doesn't not power up on battery.
I wanted to ask , if I replace cells(li-ion) of my dying asus battery with new li-po cells of same size from China.(assume I match up the voltage , but buy the bigger capacity cells ) .
Will it work ?
There are 2 very important aspects you need to take in account:
1. You need to have a solution to reset that chip (its errors internally to make it working again)
2. For a chemistry and capacity different the original you need to change many other parameters to make the firmware working properly. It's possible but it needs to be done by an expert. A better idea is to send the battery to a specialized repair shop because they have the required tools and they can replace the old cells with new cells higher capacity. There is only one shop in Romania that can do it.
@@nipembedded9976 Is a must that the battery pack board remains connected to an external voltage source during the replacement of cells? Would anything get disabled in the controller chip if disconnection from cells occurs?
Nice bro
My macbook air (late 2010) had no charge (charger broken and didn't need the laptop) and sat without charge in it for around 9 months (i think, or longer). To my surprise it did charge up all on it's own (incredibly slowly at first... macos said 0% for about an hour..).
The large internal resistance probably explains why i've got an old laptop, and under heavy CPU load at below 80% battery, it'll just cut out.. it's an old cheap replacement.. likely voltage droops under heavy load below minimum cutoff.
This is usually happening when the FCC (Full Charge Capacity) parameter does not reflect the current state of the cells. You kept the battery 9 months, the state of the cells decreased due to their chemistry behaviour in time but the microcontroller has the old information about the cells state. One option would be to charge the battery 100% in the laptop then discharge it to 0% then back to 100% in order to update the FCC. Some batteries firmware does not allow a difference in calibration cycle more than 10% of the original FCC.
I want one of these.
how and where can i buy it i'm from Tunisia..??
My laptop batteries are dead. I would like to use a power bank with all the features of a laptop bms and power it(laptop) up.
The power bank shall replace ac and internal battery. Is it possible to design such a configuration and how would the pinouts be. Thanking you in advance.
what a great video - how to learn from a Professional ;;
I need one .... Please share me the link
hi if i make hardware. Its possible to connect my hardware to your software? its i2c ?
It is not possible because of the authentication.
The one thing that was not brought up in this video is the perspective of battery building and repairs. The controller in the battery is pre-programmed at the factory, and it follows the life of the original cells. However, when you go into the battery and replace a cell, the controller must be re-programmed. Even worse, if you do a total rebuild of a battery for, example a laptop where the battery is no longer available, a full re-programming of controller for the newly replaced cells is necessary. Some people think that, for example cell two is bad, I can just go in there with a spot welder and replace the battery, and the controller will automatically recognize it. No, it won't, and you need a tool like the NLBA1 to perform a full re-programming of the controller. So yes, this might not be as valuable in a PC repair shop, as most repairs are just part swaps. But if your business is building custom batteries, or re-building batteries for older laptops, then this is a killer tool to have.
You are absolutely right. One mention, NLBA device is a battery analyzer, since February 2021 we started introducing programming chip option (which is not free).
So it is like using a defibrillator for a old disabled battery
When you change the cells, most battery controllers reject the new cells.
Can you reset this?
Yes, if the chip inside the battery is BQ8030 Sanyo firmware. Soon I will add more chips.
you can also use be2works, it has much better controller support.
Is this not a repost video adamant?
Hi pls where can I get this professional battery tools
You can buy it from www.laptopu.ro
Is this able to be used with the likes of battery powered drills/screwdrivers?
Right now no. Maybe in the future, I could start adding Makita batteries.
@@nipembedded9976 That would be a great idea! Thanks for letting us know. The price of those things nowa days ;)
dont you have a website?
I am curious about the alarming phone call, did they have a minor explosion?
The two concerns that I'd been told about were A) Quality control, a previous revision had a possibly faulty batch of power transistors that could go bang. These have been replaced, and a bigger cooling fan fitted. Additionally, better PSUs are included now, as seen by my one having a Delta Electronics unit.
B) Apparently the design was lifted from Texas Instruments' Fuel Gauge technology. However, this Fuel Gauge tech is a development kit that is fully intended to be developed into an end-user product like this, so I see no issue at all.
The chap I spoke to had encountered a faulty unit, and sometimes customer service encounters go wrong. This was one of those times. It happens, but it doesn't automatically mean that the product is fundamentally bad.
@@Adamant_IT Thanks for the very full answer Graham
@@Adamant_IT so just the sheer fact they had to revise this design, by admission, meant there was indeed faults and problems. My experience of this kit was a negative one, yours may not be.
@@Adamant_IT One note from my side. I don't use any TI development kit at all ! I just use the SBS standard which is public. Nothing more. Everything else is just work, a lot of work. There are many other chip brands, not only TI, for example Renesas R2J240.