Thanks for this video. My Molten Special Edition just finally started giving me double click issues about a week ago after using it for TWELVE years with no issues. Such a great mouse, glad it's not too hard to fix.
Wow I'm impressed to see someone else that is willing to go through all this work to restore an old gaming mouse they like. Thought I was the only one who loved their mouse this much. Mine was the second one you showed(gen 2) and I refuse to let it die. Thank you.
Me too. Ordering some switches now any recommendations? First time doing a mouse repair the old nagas are to good compared to the chroma and layer series. They feel and are cheap comparatively.
i dont remember when i bought my Naga but its been with me for a long time! Just changed the switches and it feels like new! I've had an issue that when i bring it on vacation and its not plugged in it wont work for a while so i guess the traces are not 100% anymore but i hope it will last for many years to come. love it!
Great video. Wish razer would make nagas with this shape again. Been using my naga molten since 2011 and it could use some work. Can't find replacement scroll wheels anymore.
If you dont feel like taking the whole mouse apart you can get away with taking the shell apart with just the 4 screws and then once you have access to the switches just blast them with contact cleaner while pressing the switches with a small tool. I dont have the switches on hand but this took me less than 5 minutes and the double click problem went away completely. If it happens again i will probably replace the switch but i wouldnt be surprised if this fix lasts me a while, they just need to be cleaned most of the time. Btw i used bw100 contact cleaner but im sure most contact cleaner will work the same.
Small tip for anyone who’s soldering their new switches on, make sure the both right mouse and left mouse switches sit flush against the logic board, if either of the two are raised slightly it will cause issues once the mouse is back together
I bought a Naga back when it came out thinking the side buttons would be of use for weapon change. I ended up not really using them. Once the left click started messing up I gave it to a friend who had like HP junk and told him to just blow in it. Today I run a g900 by logitech, the wirelessness is top notch imo. Also in B4 "bro change your smoke alarm battery" comments pile up.
ty for the video! just replaced left click switch to my trinity.. i took switch from my older naga and it seems to work nicely now! so it works even with different component.
hey not bad! i just did this mod on my m720 that started double clicking. Its crazy that they can't just design circuits that don;t wear out these switches as fast
@PunkNDisorderlyGamer Thx a lot for this video. I can't find the proper switch for the left and right button. Could you tell me where did you buy it, or what type is it ? Thx :)
@@arthurd1591 I genuinely don’t remember. Try typing in your mouse’s model number and micro switch it should yield some results. I think razor used Omron brand switches but I could be wrong.
Such a nice mouse! I have a Razer Basilisk X Hyperspeed with the same double click issue. Maybe one day I will replace the switch in that one. So disappointed that the issue started after 2 years of usage. I haven't came across one of these in flee markets, however I have bought a Razer BlackWidow Chroma v2 keyboard for ~12 dollars which had its cable cut. It came with the everything in the box (even the cut cable), like it was never used. Still wondering why it had a cut cable. Ordered a new cable, replaced it and using it for work since. Looks gorgeous :)
I am about to replace the switches for a Razer Naga 2012 and a Razer Naga Molten. I would like to go ahead and replace the wheel encoder and button while I'm in both of these. Where to you find the proper part numbers to buy for these? Thanks!
I ordered these parts like 10 years ago, to be honest I think I googled the make and model of the mice and got a parts list somewhere. I’m sorry I don’t remember.
I currently have the double click issue on my original Naga and I would like to keep it instead of buying the newest version. But I couldn't find the replacement parts needed. Where did you find them? Thanks for your video!
What are you referring as double click issues ? My mouse has some ghost click issues, (click even if I don't press the button), is it the same ? Where did you find the reference of the switch and where did you buy it (my deathadder elite may require a different switch) ?
Double click is when you press the button once and it registers 2 clicks. Often times very irritating for drag and drop or other actions. I don’t remember where I got the reference for the switch, I did this repair too long ago. What I would suggest is looking up your mouse model and see if there is a switch listed. I bought these switches off Amazon or eBay I don’t really remember.
Great video! I fixed my double click, however, I messed something up putting it back, it now won't track at all? any ideas? I noticed there is no longer a light at the bottom, I think there was before? I'm not sure what I did wrong, I opened it up again and it looks like everything is in the right place, I cleaned everything? I'm not sure what to do, it's acting like i'm not moving the mouse at all, everything else works fine. I've been using this mouse since I bought it when it came out, the lava edition & I can't use anything else, they are all to big, no idea why they changed the design lol. Anyway, any suggestions would be great. I looked online, but, people keep suggesting calibration & that didn't work.
Check to see if the white plug is seated properly, perhaps you pulled the plug out and damaged the cable, the one with the USB plug. I had a mouse a long time ago that was intermittent (it would occasionally disconnect), it had a broken plug and would only work if you crimped a certain place in the wire. You may also need to replace the usb wire. Does the mouse connect to the computer at all?
@@PunkNDisorderlyGamer I took it apart again & reconnected everything & it's all working great! I also had noticed there was a little spot on the opposite side of the laser eye that had a smudge of residue of some flux that must have touched it after I had wiped it, so I wiped that away too. I'm just so happy it's all working again! Thanks so much!!
Get yourself some microswitches and replace them good as new. The early Razer stuff is top notch nowadays probably not so much. Death-Adder is the standard mouse designed one. I remember my mom picked up one at CompUSA when they were liquidating for bankruptcy for like $10.
Useless, razer is the worst, trust me, I dont remember how many mail i sent trying to get my razer naga trinity fixed, but they didn't care, idk the problem, i even wanted to pay an extra for repair my mouse (mine is out of warranty) but still nothing, idk what to say, if i had to waste my money i would rather burn money instead of giving to a chimp company from calabria
Well I've used my Razer naga(like the one in the video) since 2013 and only now i have to replace/clean the click modules, so I dont know about trusting you on that one. I understand that you're having a frustrating situation, try see if anyone you know might be able to fix it for a reward or try call some repairshops(shops that repaires phones might be interested).
![Every Guild Wars 2 player NEEDS one of these! [ MMO Mouse Demo & Comparison ]](/img/n.gif)
Thanks for this video. My Molten Special Edition just finally started giving me double click issues about a week ago after using it for TWELVE years with no issues. Such a great mouse, glad it's not too hard to fix.
Wow I'm impressed to see someone else that is willing to go through all this work to restore an old gaming mouse they like. Thought I was the only one who loved their mouse this much. Mine was the second one you showed(gen 2) and I refuse to let it die. Thank you.
Me too. Ordering some switches now any recommendations? First time doing a mouse repair the old nagas are to good compared to the chroma and layer series. They feel and are cheap comparatively.
i dont remember when i bought my Naga but its been with me for a long time! Just changed the switches and it feels like new! I've had an issue that when i bring it on vacation and its not plugged in it wont work for a while so i guess the traces are not 100% anymore but i hope it will last for many years to come. love it!
Do you have a wireless mouse or wired? You might need a new battery or to replace the cable, depending on which type you have.
Great video. Wish razer would make nagas with this shape again. Been using my naga molten since 2011 and it could use some work. Can't find replacement scroll wheels anymore.
If you dont feel like taking the whole mouse apart you can get away with taking the shell apart with just the 4 screws and then once you have access to the switches just blast them with contact cleaner while pressing the switches with a small tool. I dont have the switches on hand but this took me less than 5 minutes and the double click problem went away completely. If it happens again i will probably replace the switch but i wouldnt be surprised if this fix lasts me a while, they just need to be cleaned most of the time. Btw i used bw100 contact cleaner but im sure most contact cleaner will work the same.
happy to see you uploading again even if only a bit. looking forward to the next one. NJ Gang lol
Hey great video, but it would be helpful if u put links to purchase the switches and mouse feet
Small tip for anyone who’s soldering their new switches on, make sure the both right mouse and left mouse switches sit flush against the logic board, if either of the two are raised slightly it will cause issues once the mouse is back together
I bought a Naga back when it came out thinking the side buttons would be of use for weapon change. I ended up not really using them. Once the left click started messing up I gave it to a friend who had like HP junk and told him to just blow in it. Today I run a g900 by logitech, the wirelessness is top notch imo.
Also in B4 "bro change your smoke alarm battery" comments pile up.
I played a lot of WOW back when I bought it, it was a must.
The alarm, I have to change it.
ty for the video! just replaced left click switch to my trinity.. i took switch from my older naga and it seems to work nicely now! so it works even with different component.
This worked perfectly for me. Great video!
hey not bad! i just did this mod on my m720 that started double clicking. Its crazy that they can't just design circuits that don;t wear out these switches as fast
They’re rated for millions of clicks, but I’m sure they don’t last that long. After all, it’s a small mechanism (moving part) that fails.
@PunkNDisorderlyGamer Thx a lot for this video. I can't find the proper switch for the left and right button. Could you tell me where did you buy it, or what type is it ? Thx :)
@@arthurd1591 I genuinely don’t remember. Try typing in your mouse’s model number and micro switch it should yield some results. I think razor used Omron brand switches but I could be wrong.
Such a nice mouse!
I have a Razer Basilisk X Hyperspeed with the same double click issue. Maybe one day I will replace the switch in that one. So disappointed that the issue started after 2 years of usage.
I haven't came across one of these in flee markets, however I have bought a Razer BlackWidow Chroma v2 keyboard for ~12 dollars which had its cable cut. It came with the everything in the box (even the cut cable), like it was never used. Still wondering why it had a cut cable. Ordered a new cable, replaced it and using it for work since. Looks gorgeous :)
Cut cables are easy fixes too. I’m glad it worked out.
I am about to replace the switches for a Razer Naga 2012 and a Razer Naga Molten. I would like to go ahead and replace the wheel encoder and button while I'm in both of these. Where to you find the proper part numbers to buy for these? Thanks!
I ordered these parts like 10 years ago, to be honest I think I googled the make and model of the mice and got a parts list somewhere.
I’m sorry I don’t remember.
@@PunkNDisorderlyGamer No worries! Thanks!
The second generation naga epic is my favourite mouse of all time. Sadly I dont have the skills to fix the double click issue on my own.
I currently have the double click issue on my original Naga and I would like to keep it instead of buying the newest version. But I couldn't find the replacement parts needed. Where did you find them? Thanks for your video!
The switch can be found on eBay or Amazon in packs of 5 or more relatively cheap. The part number is “D2FC-F-7N”.
@@PunkNDisorderlyGamer Thanks for your quick reply!
@@lucienguimaraes9557 you got it 👍
@@PunkNDisorderlyGamer Hey man, I just finished fixing my Razer Naga. So happy to be able to use it again for the next years thanks to you!
Could you please link the mouse foot? I would like to attempt this on my old naga molten
What are you referring as double click issues ? My mouse has some ghost click issues, (click even if I don't press the button), is it the same ?
Where did you find the reference of the switch and where did you buy it (my deathadder elite may require a different switch) ?
Double click is when you press the button once and it registers 2 clicks. Often times very irritating for drag and drop or other actions. I don’t remember where I got the reference for the switch, I did this repair too long ago. What I would suggest is looking up your mouse model and see if there is a switch listed. I bought these switches off Amazon or eBay I don’t really remember.
The screws are not wanting to come out. Any suggestions? I might have stripped one.
Once I do this, do I have to replace this a bunch of times as well or just the one time?
Great video! I fixed my double click, however, I messed something up putting it back, it now won't track at all? any ideas? I noticed there is no longer a light at the bottom, I think there was before? I'm not sure what I did wrong, I opened it up again and it looks like everything is in the right place, I cleaned everything? I'm not sure what to do, it's acting like i'm not moving the mouse at all, everything else works fine. I've been using this mouse since I bought it when it came out, the lava edition & I can't use anything else, they are all to big, no idea why they changed the design lol. Anyway, any suggestions would be great. I looked online, but, people keep suggesting calibration & that didn't work.
Check to see if the white plug is seated properly, perhaps you pulled the plug out and damaged the cable, the one with the USB plug.
I had a mouse a long time ago that was intermittent (it would occasionally disconnect), it had a broken plug and would only work if you crimped a certain place in the wire. You may also need to replace the usb wire.
Does the mouse connect to the computer at all?
@@PunkNDisorderlyGamer I took it apart again & reconnected everything & it's all working great! I also had noticed there was a little spot on the opposite side of the laser eye that had a smudge of residue of some flux that must have touched it after I had wiped it, so I wiped that away too. I'm just so happy it's all working again! Thanks so much!!
@@Dropla Congrats, I’m glad you figured it out. It’s quite satisfying solving a problem.
@@PunkNDisorderlyGamer Well, with your help I did lol~ many thanks!!
I have had a bunch of replacement Razer Deathadders over the years, all the switches seem to be hit or miss.
Get yourself some microswitches and replace them good as new. The early Razer stuff is top notch nowadays probably not so much. Death-Adder is the standard mouse designed one. I remember my mom picked up one at CompUSA when they were liquidating for bankruptcy for like $10.
I have a Logitech g203 that's double clicking. I'm going to be doing this sometime soon.
Yeah it should be straight forward.
@@PunkNDisorderlyGamer 5:06 oof, goo gone definitely doesn't like labels, I'd rather use IPA or Windex. And sometimes those are a bit too harsh.
i have the left handed razer naga i would love to have someone restore it
My middle click broke :(
I think the sensor for it broke or somethin.
Useless, razer is the worst, trust me, I dont remember how many mail i sent trying to get my razer naga trinity fixed, but they didn't care, idk the problem, i even wanted to pay an extra for repair my mouse (mine is out of warranty) but still nothing, idk what to say, if i had to waste my money i would rather burn money instead of giving to a chimp company from calabria
Well I've used my Razer naga(like the one in the video) since 2013 and only now i have to replace/clean the click modules, so I dont know about trusting you on that one.
I understand that you're having a frustrating situation, try see if anyone you know might be able to fix it for a reward or try call some repairshops(shops that repaires phones might be interested).
hi Daisuke, I prefer videos when you repair consoles, do you have a facebook or instagram page?
Next video may be a console repair, it’s one that has been giving me trouble.
No I don’t have FB or Instagram, I have Reddit it’s in the description.
Also, in the last second of the video, in the background you can just barely make out the box to my Lupin the 3rd board game.
@@PunkNDisorderlyGamer I hadn't seen him, now yes 😁
@@PunkNDisorderlyGamer i have no idea what a reddit is, you should make a facebook or instagram page
@@Serpicoitalia when I hit 10k subs maybe 😅