I forgot to add that if you watch the Ferrari prancing horse logo on the back of the car, the image “flips” depending if you steer left or right from the center. Was a cool way to halve the number of frames needed and memory. You’d never notice the tail switching “sides” when playing. Regards
The game where that happens at 24:18 is Turbo Out Run - if you fail to beat the rival car every 5 stages she leaves your car for his. That was one professionaly made impact driver though.
Love the way the guy left the scraper/separator tool under the control panel decal… like leaving your spanners on the nuts when you give up on a car job and take it to a garage… keep the videos coming please. ♥️
Don't forget a front end alignment when you get done. maybe balance the tires while you're at it? Oh and, Never "should " on a guy unless they likes that kinda thing, and I don't think that Ronnie is that kinda guy.
Square keys are just that, square keys. Woodruff keys are half round and usually have to be tapped in. Both of those keys appeared to be just square stock. Do appreciate the videos - you helped me rebuild my Seeburg DS160, thank you!
I think that metal plate/disk is supposed to be folded around the nut to prevent it from unscrewing itself, instead of using a cotter pin, looked like the plate had a flat spot on the hole to key it to the shaft. I've seen it done that way in other high vibration situations.
Arcade repair dude in search of socket set. LOL. I'm sorry it was the plyers on the bolt got me out of the basement!!!! At least not living with mom at moment. Thank you for the great Video as always!!!!
Great video, Cool to see both of you guys tag teaming the game. That was cool to see how the game works. I remember playing outrun at the local bowling alley. Loads of fun and still looks like a lot of fun. Thanks for filming Ronnie.
Great video, outrun stand-up cabinet is my all time favorite from my youth, when are u going to repair an i, robot cabinet? Keep up the great work guys👍
Loved Out Run as a kid, always dreamed of owning one but they're becoming rare and expensive! Maybe I'll find a busted up one and see if I can fix it up.
JOE CLASSIC< what you recommend using to keep the mechanism oiled and lubricated plus to prevent the Nylon Gear from breaking in the steering assembly? the 3 in 1 oil SAE 20
As you know, SEGA = Service Games, which is apt as this game certainly needed to be serviced. I imagine that if they were called in to fix it, it would cost 5x as much as you charged. Not my favorite game of theirs, but it was certainly a great arcade title in its day.
Hanging out for the day a Renegade Arcade Machine makes its way into the shop...🧚♂️. Absolutely nobody has a repair/restoration video of this game on TH-cam unless i had a 'man look' as my wife used to say🙄
I'm surprised that more of them didn't need that gear. I saw many take a lot of abuse. It's a shame that the shaker motor didn't provide real force feedback. My force feedback wheel has a motor half that size and provides crazy effects on some grames. Mobil 1 Championship rally gives you a pull in the steering when you hit too many rocks along the road and you can repair it between stages. My Nascar game gives you a slight pull when someoe behind you pulls out to pass.
Love y'all videos but this one was hard to watch! Joe is out there single handedly keeping the Chinese tool market alive! Someone get this man some quality hand tools!
I've got a couple driving games from the 2010s at the arcade I work at an the steering assemblies on them are remarkably similar to this. Funny how little certain designs change over the years - if it ain't broke, don't fix it, eh?
Hope you greased up that gear and everything else while you were in there. Also, that shifter gear shaft is a major PITA to remove. So hopefully, before you reinstalled it, you changed out the spring so it doesnt flop around while shifting to low gear.
Was waiting for the swave deboner skilled driver to take over on the gal. I remember throwing a couple quarters in that game. Have you worked on a donkey Kong? I suppose I could look but it’s easier to ask. You guys have the kind of shop where one day I expect to read a couple brothers discovered the secrets of cold fusion.
Nice reflection of joe... intresting how ron shoots from an angle avoiding getting his refection off the monitor... do a face reveal.. its not like your an elephant man or something? Or are you just an A.I. BOT voice over and does really exist.
Great Balls of fire ….!!!! Even Milwaukee tools are made in China 🇨🇳 Just like Apple products and Sony PlayStation consoles…!!!When will it ever end …??
Ron, Nice Socket Set - Pliers Combo...
Was waiting for your glass case to break the entire time!!! 😬
That thing has seen it all
That control panel is super heavy.
For real
Pls use better tools next time you repair something
5:53 let's hammer this part on top of "glass" display case🤦
Monkey's and footballs come to mind during this video. Well done gents.
Magical Sound Shower... Brings back so many good memories!
An iconic musical video game masterpiece for sure. 🎶♥️🎵
When I hear Magical Sound Shower, I always feel happy and upbeat. 🤠
I forgot to add that if you watch the Ferrari prancing horse logo on the back of the car, the image “flips” depending if you steer left or right from the center. Was a cool way to halve the number of frames needed and memory. You’d never notice the tail switching “sides” when playing. Regards
The farm kid in me loves the use of pliers. The service tech in me is screaming inside. Haha.
The game where that happens at 24:18 is Turbo Out Run - if you fail to beat the rival car every 5 stages she leaves your car for his.
That was one professionaly made impact driver though.
Love the way the guy left the scraper/separator tool under the control panel decal… like leaving your spanners on the nuts when you give up on a car job and take it to a garage… keep the videos coming please. ♥️
One of my favourite arcade styles of games! Outrun, Chase HQ…..great gob!
Look at you Ronnie fixing a "Ferrari" ! LOL The way you drive I wouldn't be surprised if she got out and got in another car
either!
She'd sit down in that seat
*Defo one of the best arcade games ever*
Yup!
Steering gear, you should also check the tie rods and ball joints.
Don't forget a front end alignment when you get done.
maybe balance the tires while you're at it?
Oh and,
Never "should " on a guy unless they likes that kinda thing, and I don't think
that Ronnie is that kinda guy.
sorry I blew up. ha@@nicoleking772
I love the Pole Position demo sound in the background. 🏁🏎️💨
Square keys are just that, square keys. Woodruff keys are half round and usually have to be tapped in. Both of those keys appeared to be just square stock. Do appreciate the videos - you helped me rebuild my Seeburg DS160, thank you!
"Why does it have pole position sounds" made me laugh - played both the sega outrun upright and the pole position sit down cab in my youth :)
That was soooo much easier than the other TH-cam video. You guys are geniuses.
I haven't watched that other video, LOL
Cross-threading is just free locktite.
That is a good point
So you repaired Sega with Konami....Metal Gear! :-)
You…. You’re clever, you.
Cool video as always! That quarter kinda looks like someone was going to make a ring out of it.
I think that metal plate/disk is supposed to be folded around the nut to prevent it from unscrewing itself, instead of using a cotter pin, looked like the plate had a flat spot on the hole to key it to the shaft. I've seen it done that way in other high vibration situations.
Arcade repair dude in search of socket set. LOL. I'm sorry it was the plyers on the bolt got me out of the basement!!!! At least not living with mom at moment. Thank you for the great Video as always!!!!
Nice work. That’s a really nice one. Was the sound track of an arcade of a certain years Thanks for sharing.
I dont know if Mike liked the video, but I sure enjoyed it. Thank you for filming it for me.
Joe had me rolling with those pliers. Eh, who needs a socket... not Joe.
Dang, the wheel shaking is violent. Definitely gives you an incentive to stay on the road!
LOL instead of Home Improvement electronic equipment u guys joe and ron love love your vids I watch every one and get ex to see what's next
Thank you Jonathan, we appreciate that!!!
Great video, Cool to see both of you guys tag teaming the game. That was cool to see how the game works. I remember playing outrun at the local bowling alley. Loads of fun and still looks like a lot of fun. Thanks for filming Ronnie.
Excellent job teaching Joe how to be useful! Did you remember to replace the wiper blades and top off the blinker fluid as well?
Great video, outrun stand-up cabinet is my all time favorite from my youth, when are u going to repair an i, robot cabinet? Keep up the great work guys👍
what a Classic
This thing made a lot of money!
@@LyonsArcade so it should
Loved Out Run as a kid, always dreamed of owning one but they're becoming rare and expensive! Maybe I'll find a busted up one and see if I can fix it up.
I loved playing that game in Shakey’s Pizza when I was a kid In dover Delaware ❤
Take a silver quarter and tap it with a Hammer on edge as you roll it.. rolls the sides over then cut out the center for a ring.
JOE CLASSIC< what you recommend using to keep the mechanism oiled and lubricated plus to prevent the Nylon Gear from breaking in the steering assembly? the 3 in 1 oil SAE 20
That's an Out Ran. Funnily enough. We have the exact problem on our Out Run
Awww your rubbish bin is full..was gonna put my banana peel in there🍌
Lol the not so subtle drill in the trash 🤣🤣🤣
I used to love this game as a kid! Circa 1989
Tossing it in the garbage made me LOL for real!
I got billet confused with babbitt for a second and thought 'huh, so the metal gear wears out against the nylon faster that way...?!?!'.
hammering on a glass table.. you crazzy man....
I always do my hammering over a glass-top display case. Nothing to see here.
We made it!
As you know, SEGA = Service Games, which is apt as this game certainly needed to be serviced. I imagine that if they were called in to fix it, it would cost 5x as much as you charged.
Not my favorite game of theirs, but it was certainly a great arcade title in its day.
LOL Heathens! We used to be such bad kids. The best method is the string method :p
Hanging out for the day a Renegade Arcade Machine makes its way into the shop...🧚♂️. Absolutely nobody has a repair/restoration video of this game on TH-cam unless i had a 'man look' as my wife used to say🙄
"It's broke!"
Never change, Joe...
Never change! 😁
I'm surprised that more of them didn't need that gear. I saw many take a lot of abuse. It's a shame that the shaker motor didn't provide real force feedback. My force feedback wheel has a motor half that size and provides crazy effects on some grames. Mobil 1 Championship rally gives you a pull in the steering when you hit too many rocks along the road and you can repair it between stages. My Nascar game gives you a slight pull when someoe behind you pulls out to pass.
Love y'all videos but this one was hard to watch! Joe is out there single handedly keeping the Chinese tool market alive! Someone get this man some quality hand tools!
Thanks guys..great video :) x defo want a T-shirt soon x
Thank you for watching Saskia!
@@LyonsArcade Always tuning in ! x
I know you’ll make fun of me, but using that hammer on the glass case just about gave me a heart attack.
I'm not going to make fun of you, you're just more careful than we are. It's not a good idea to use a hammer around a glass case....
Socket wrenches can be your friends!
Waiting for that glass display case top to crack...
It’s broke!
Not Anymore!
“Show me the money”
That guy's a real class act, he came right down and paid us!
FYI, The 2 small screws holding on the aluminium gear are called grub screws.
I've got a couple driving games from the 2010s at the arcade I work at an the steering assemblies on them are remarkably similar to this. Funny how little certain designs change over the years - if it ain't broke, don't fix it, eh?
Hope you greased up that gear and everything else while you were in there.
Also, that shifter gear shaft is a major PITA to remove. So hopefully, before you reinstalled it, you changed out the spring so it doesnt flop around while shifting to low gear.
Hopefully!
16:37😁
🤐 anxiety level 100 .. working on top of a glass display case 😅
Pople used to make rings by tapping the edges of coins like your quarter there.
You need to use a Swedish nut lathe on those bolts😂
Incredible!!!!!!
I mean it's pretty good but I don't know about Incredible :)
No, it's incredible!! :) Nostalgia 100% Thank you@@LyonsArcade
I can see some 70yr old Japanese guy screaming and pulling his hair out seeing you use pliers for a wrench… lol😂
Cool
Hey Ghillie, thank you for watching!
Was waiting for the swave deboner skilled driver to take over on the gal. I remember throwing a couple quarters in that game. Have you worked on a donkey Kong? I suppose I could look but it’s easier to ask.
You guys have the kind of shop where one day I expect to read a couple brothers discovered the secrets of cold fusion.
Dont give it back to Mike, send it to me lol
I know a guy that used a pole position steering wheel on his boat
Better have my money when I come to collect!
Maybe if u put the parts inside an operation wolf cabinet it will “unbroke it”😂
I know someone has a socket set. Jeesh!
What's wrong with this Sega Outrun Arcade Steering Assembly?
Yodelayheehoo
Hello Lil Everette!
Hi
Low 😆
Hello Marla!
How bout a pinball video Ronnie??..havent seen one of them in awhile!! 😉
There was one Friday
@@LyonsArcade I know..im very cynical at 445am😉
Nice reflection of joe... intresting how ron shoots from an angle avoiding getting his refection off the monitor... do a face reveal.. its not like your an elephant man or something? Or are you just an A.I. BOT voice over and does really exist.
This isn't a makeup channel, what kind of weirdo goes around demanding to see some dude's face? Go be weird somewhere else.
c'est cassé!!
Looks like you guys could use an actual mechanic.
An actual mechanic charged Matt $1000 yesterday to fix a cracked heater hose on his van so I won’t ever be using an actual mechanic
Great Balls of fire ….!!!! Even Milwaukee tools are made in China 🇨🇳 Just like Apple products and Sony PlayStation consoles…!!!When will it ever end …??
We’re bringing it back
Its a virgin people (not anymore) 😁