‼️Beware of false teachers in the comment section‼️ they are here to spread false information. Open the KJV bible yourself and read what the true gospel is. The true gospel is we were dead in our sins, separated from God because of it and Jesus came down off the throne in the likeness of man died for our sins, arose 3 days later and now all we do is believe in the finished work and put our trust in the LORD and BELIEVE in our HEARTS confess with our mouth and you will be saved. We aren’t saved by works but by Grace through our faith. It is so simple even I was saved by His grace and mercy. Don’t let anyone lie to you. Many have gone out to lie and pervert the word of God or water it down. Find the answers for yourself just ask God to lead you and you won’t go wrong! May the peace of God be with you all in Jesus Christ name. AMEN!
It makes sense though, JC was a Honda Fanboy too but he kept quiet about it because he knew V-Tec was over rated. As the good book says: "He did not speak of his own Accord"
you can spray your trophy with foot powder, thats what we use in scanning packaging which is shiny and clear and it works and can be washed away after.
if you bring the camera closer the object gets bigger, I'm waiting for my ferret now but I would try it just to eliminate whether it works or not. again foot powder might make that scan come out better
Hey man, know this isnt related to this video but its the only way to reach out to you, Im going to be using your tutorials to paint my sun-damaged black accord the same red you painted your honda a while back. My question is do you recommend using the 2X you used on your honda or using the anti-rust protective enamel that you used for this car?
Also, from your experience, is there any noticeable change between priming the car and not priming the car? I want to prime it to be on the safe side, but it'll cost me $50 extra if I do. Sorry for the question spam, just want to get it done right!
@@dappersquid27honestly the priming seems to make a difference only if it’s properly sanded smooth and if the car is different colors. A “pro” would say primer over pre existing paint is a must but in my experience it’s not always a must. As long as the prior paint is in decent condition (sandable) condition meaning when you sand it the paint comes out smooth to the feel then you won’t need a primer. The protective enamel stuff is without a doubt better than the 2X stuff but it all comes down to color choice because sometimes they don’t have it in the advance formula or protective enamel how ever you call it. The 2X dries faster which causes stripes easier and it wrinkles up when you apply a 2-3 coat and that’s why I usually do 1 thick coat. My ep3 is still going strong 6+ months later
I wana try to learn n do this so i can make some parts n stuff like wide body for my sedan. You may be able to load the files into fusion 360 to blend them together. Im still trying to learn it myself for cnc stuff. U can also find a 3d model of your car on thingiverse
Yes definitely!! It’s not it our works but what HE did for us! The moment people take the power from their own hands and place it in HIS hands then they will be saved!
If you spoke in a way that makes sense to modern people maybe they would listen. But all you do is repeat the script. Maybe because you don’t even understand it, so you can’t actually explain it. Good luck with that.
I always wanted something like this to be able to scan the rear quarter and front fenders of my car to get a model to build off of and design wide body fender flares that would fit the contour of the car. Then you could print them and use them to take a mold off of and build custom widebody parts from carbon fiber or fiberglass
@@JamesDguy you already know more than me about 3d scanning lol my modeling would are also very minimal. Also my phone broke so im using an older phone with a broken screen and I cant get onto my instagram without some code from an authenticator which I don't have and cant set up without being logged into instagram
I agree Romans 1:16 sums it all up for me. Romans 1:16 “For I am not ashamed of the gospel of Christ: for it is the power of God unto salvation to every one that believeth; to the Jew first, and also to the Greek.”
‼️Beware of false teachers in the comment section‼️ they are here to spread false information. Open the KJV bible yourself and read what the true gospel is. The true gospel is we were dead in our sins, separated from God because of it and Jesus came down off the throne in the likeness of man died for our sins, arose 3 days later and now all we do is believe in the finished work and put our trust in the LORD and BELIEVE in our HEARTS confess with our mouth and you will be saved. We aren’t saved by works but by Grace through our faith. It is so simple even I was saved by His grace and mercy. Don’t let anyone lie to you. Many have gone out to lie and pervert the word of God or water it down. Find the answers for yourself just ask God to lead you and you won’t go wrong! May the peace of God be with you all in Jesus Christ name. AMEN!
Okay that turned weird.
Why the f*** was religion brought into a review of a 3d scanner?
@@scoobytim129 it's his channel. If you don't like it, then leave.
I'm glad to see Christian TH-camrs still exist. Keep it up man.
Really interesting stuff and story, good luck with your move too🤞
Thank you! God bless!!
That seems like a cool toy...er I mean tool. Congrats on the move, BIG STEP!
Thanks and it’s fun to use this 3D scanner.
You could scan your whole car and find someone on fiver to turn it into a printable model.
Awesome scanning and great message.
i forgot i came here for a 3d scanner review when things got weird with this john guy blasted everywhere
Heard the Jesus preaching begin and I'm clicking away.
The Lord forgives.
It makes sense though, JC was a Honda Fanboy too but he kept quiet about it because he knew V-Tec was over rated.
As the good book says: "He did not speak of his own Accord"
@@Pretzil43 Haha!
you can spray your trophy with foot powder, thats what we use in scanning packaging which is shiny and clear and it works and can be washed away after.
This has potential for modding my car Into games. Getting it to drive might be a challenge though.
Yea definitely will would be awesome though!!!!
if you bring the camera closer the object gets bigger, I'm waiting for my ferret now but I would try it just to eliminate whether it works or not. again foot powder might make that scan come out better
Hey man, know this isnt related to this video but its the only way to reach out to you, Im going to be using your tutorials to paint my sun-damaged black accord the same red you painted your honda a while back.
My question is do you recommend using the 2X you used on your honda or using the anti-rust protective enamel that you used for this car?
Also, from your experience, is there any noticeable change between priming the car and not priming the car? I want to prime it to be on the safe side, but it'll cost me $50 extra if I do. Sorry for the question spam, just want to get it done right!
@@dappersquid27honestly the priming seems to make a difference only if it’s properly sanded smooth and if the car is different colors. A “pro” would say primer over pre existing paint is a must but in my experience it’s not always a must. As long as the prior paint is in decent condition (sandable) condition meaning when you sand it the paint comes out smooth to the feel then you won’t need a primer. The protective enamel stuff is without a doubt better than the 2X stuff but it all comes down to color choice because sometimes they don’t have it in the advance formula or protective enamel how ever you call it. The 2X dries faster which causes stripes easier and it wrinkles up when you apply a 2-3 coat and that’s why I usually do 1 thick coat. My ep3 is still going strong 6+ months later
@@JamesDguy Thanks a ton! I'm planning on sanding down the base coat with 320, then applying primer, then sanding the primer with 800. Wish me luck!
If u still end up moving to paris like ya talked about before u won't be bout hr or so away from where im at.
It’s going to most likely be 30 mins from paris to the east roughly
@@JamesDguy ahh still not too far really. Just quick run down I30
I wana try to learn n do this so i can make some parts n stuff like wide body for my sedan. You may be able to load the files into fusion 360 to blend them together. Im still trying to learn it myself for cnc stuff. U can also find a 3d model of your car on thingiverse
Yea that’s the name I couldn’t remember lol
@@JamesDguy yeah there are several out there but that's the one free one I could think of right off hand
Damn haven’t seen your channel years , you came along way , god bless
Moving is a big loss to the Neighbors!
Awesome job presenting the good news of the gospel! Very clear. Salvation lays on the redemptive work of Christ. Repent and trust the Savior.
Yes definitely!! It’s not it our works but what HE did for us! The moment people take the power from their own hands and place it in HIS hands then they will be saved!
If you spoke in a way that makes sense to modern people maybe they would listen.
But all you do is repeat the script. Maybe because you don’t even understand it, so you can’t actually explain it.
Good luck with that.
👍💫✨️💫❤️🔥😎
Spray developer on shiny surfaces or use foot powder spray.
Yes good tips! Thanks!
I always wanted something like this to be able to scan the rear quarter and front fenders of my car to get a model to build off of and design wide body fender flares that would fit the contour of the car. Then you could print them and use them to take a mold off of and build custom widebody parts from carbon fiber or fiberglass
Yea for sure! It would be awesome man! If I knew more like you do I would be able to do a lot with this scanner
@@JamesDguy you already know more than me about 3d scanning lol my modeling would are also very minimal. Also my phone broke so im using an older phone with a broken screen and I cant get onto my instagram without some code from an authenticator which I don't have and cant set up without being logged into instagram
@@sinformantI’m sure you could fill in holes in my scans and make them printable. The more I use it the better it gets
That's what I wana do as well. Make a wide body for my sedan
I have sinned! I watch too much of this video.
Came for a review of a 3D scanner and instead had God foist upon me.
I think ferret has hard time scanning shiny black objects.
Doing good work man.
Thanks man. I have made mistakes in this video but im human and doing my best. Thanks for the love brother.
what a load of drivel
Best part! 10:40
I agree Romans 1:16 sums it all up for me. Romans 1:16
“For I am not ashamed of the gospel of Christ: for it is the power of God unto salvation to every one that believeth; to the Jew first, and also to the Greek.”
👍👍
Strange how John 316 came out perfect for everyone!
Excuse me! can i scan size for ppf pre cut? thank you