The install itself looks fairly easy, BUT locating that wiring harness on both sides is clear as mud to me! I just don't feel 100% confident in doing that part. I think I'm going to spend a few bucks and let my dealer handle this one...
Great video in the end. I have a question: that little pic you showed of the Honda wiring, was that something that was included with the kit, or is that a pic from a Honda Pilot repair manual? I wonder if all trim levels included that same harness. I noticed you already had stock "footwell" lighting. I do not have at any footwell lighting, so my harness could very well be different under the panels. I'm definitely curious.
The most important and uncommon step required is location and connection to the car's electrical system. Of course, that is given practically no illustration or explanation.
Hi Randall. You embarrassed me with your comment and I was not too lazy and watched the video again, and I don't understand what you are talking about ?! There are illustrations and explanations! Either you didn't watch it or you didn't watch this video carefully. Also, when you bought this thing, it comes with instructions where it shows everything, my video just helps visually.
Where do you get those for a pilot I have a 2021 what colors do they have I have a silver and black 2021 Honda Pilot I think those were look really cool how much are they and where can I get them
Thank you for your comment 👍. I am not sure, about extension... 🤔, I hope it possible found on same website. But I don't remember where my wife it ordered...
@@master-vsons2838 thank you for answering me. I would like to install illuminated running board and the illuminated door sill too, do you think that I will have a extra hardness 2-pin connector already in the car?
@@mr.p8479 running boards are always fun, but I wouldn't personally install running boards. The Pilot is already so low to the ground that you really don't need any help getting in and the running boards will just cause an even lower clearance in case you ever do go up into local mountains or something. I like the look of running boards, but I don't want to lose what little extra clearance I already have.
Thank you for your supporting our channel 🤝. ...for back lights you need to use the front lights(separate order) , ordered two front light sets ! For Installation, you can splice wire together(by color) or use splitter (buy separately), try to find 🤞! Good luck and thank you for your comment ✌👍 (🤞 I hope you get answer🤞)
Hello! Can you explain to me what exactly you are asking about? ...for lighting rear sill need to use the same front(need to buy separately), and splitter to connect them together. We bought this kit on the internet I don't remember where(not Amazon, Ebay), some auto parts website. ...now, you can find a more effective light door sill, but the part installation will the same(🤞🤞😉)
I have Honda Pilot Touring 2017. Can you filming how to connect wired in dash board and which connector ? I know it hard to filming down there but would please. Appreciate your filming
*Vehicle not included.
Thanks for taking the time to film this video. I have a 2018 CRV that I'm going to try this on. You gave me a good idea of how it's done.
John Gonzales
Thank you
Nice video. If that was your dad helping you install it, thumbs up for him, great job 😁👍.
Thank you ✌😊
The install itself looks fairly easy, BUT locating that wiring harness on both sides is clear as mud to me! I just don't feel 100% confident in doing that part. I think I'm going to spend a few bucks and let my dealer handle this one...
😊✌Thank you for your comment ✌
“We clean the door with an antibacterial wipe” You meant alcohol wipe? Good video, thanks for posting.
Yes
Thank you for your comment.
Yes!
Great video in the end. I have a question: that little pic you showed of the Honda wiring, was that something that was included with the kit, or is that a pic from a Honda Pilot repair manual? I wonder if all trim levels included that same harness. I noticed you already had stock "footwell" lighting. I do not have at any footwell lighting, so my harness could very well be different under the panels. I'm definitely curious.
It was long time ago.
Thank you for your comment!(спасибо)
The most important and uncommon step required is location and connection to the car's electrical system. Of course, that is given practically no illustration or explanation.
Hi Randall.
You embarrassed me with your comment and I was not too lazy and watched the video again, and I don't understand what you are talking about ?! There are illustrations and explanations! Either you didn't watch it or you didn't watch this video carefully. Also, when you bought this thing, it comes with instructions where it shows everything, my video just helps visually.
@@master-vsons2838 he is totally right
Skip to 13:29 for mad sickkkk beatzz
😊
Where do you get those for a pilot I have a 2021 what colors do they have I have a silver and black 2021 Honda Pilot I think those were look really cool how much are they and where can I get them
Sorry it was 4 years ago, i don't remember .
Where do i get the door seals
amazon or ali express have great options
Thanks for posting this!
Your welcome
Good video, I have a question, where can I get the extension?
Thank you for your comment 👍.
I am not sure, about extension...
🤔, I hope it possible found on same website.
But I don't remember where my wife it ordered...
@@master-vsons2838 thank you for answering me. I would like to install illuminated running board and the illuminated door sill too, do you think that I will have a extra hardness 2-pin connector already in the car?
@@mr.p8479 running boards are always fun, but I wouldn't personally install running boards. The Pilot is already so low to the ground that you really don't need any help getting in and the running boards will just cause an even lower clearance in case you ever do go up into local mountains or something. I like the look of running boards, but I don't want to lose what little extra clearance I already have.
Great video. I just subscribed. Can you tell me where you get the extension wire for the back LED lights?
Thank you for your supporting our channel 🤝.
...for back lights you need to use the front lights(separate order) , ordered two front light sets !
For Installation, you can splice wire together(by color) or use splitter (buy separately), try to find 🤞! Good luck and thank you for your comment ✌👍
(🤞 I hope you get answer🤞)
Would these work also with installing the led running boards.
Yes the running boards work off the same wire harness
Question if put this i lose my guaranty??
I believe so due to you taped into the electrical wires
How do you get the kit for the rear door to light up?
Hello!
Can you explain to me what exactly you are asking about?
...for lighting rear sill need to use the same front(need to buy separately), and splitter to connect them together.
We bought this kit on the internet I don't remember where(not Amazon, Ebay), some auto parts website.
...now, you can find a more effective light door sill, but the part installation will the same(🤞🤞😉)
it's called a sill not seals
O, Thank you!!!
👍, I fix it! Thank you very much
Where i can get those doors seals??? 😃🙏🏼🙏🏼
www.hondapartsguys.com/oem-parts/honda-door-sill-trim-illuminated-08e12tg7100?origin=pla&gclid=CjwKCAjwtvnbBRA5EiwAcRvnpgupEce1UhzG92h1RT1nVnb2Rx1NbyetinCGVo79KhdbcmWyFisuFhoCgjIQAvD_BwE
Run wire into the main frame?.... You know this vehicle has no frame right?
✌🤭
🤝!
Where did you purchase the product?
Sorry, we bought online, but I don't remember exactly where.
painful video
👍👌
I have Honda Pilot Touring 2017. Can you filming how to connect wired in dash board and which connector ? I know it hard to filming down there but would please. Appreciate your filming
Su Ngo
I try to help, I try to founded some information for you.