Using a Butane Torch For Making Your Own Jewellery At Home
ฝัง
- เผยแพร่เมื่อ 11 ธ.ค. 2024
- If you are having problems with your silver and gold soldering and you have followed all the correct proceedures - clean metal, tight fitting joints, fluxed joint - and you still can not get the solder to flow, then it could be your torch.
Andrew shows you where the sweet spot is of a flame and how to use this to your advantage.
THE EQUIPMENT I USE TO VLOG
Canon 70D, Body; tinyurl.com/j89...
Canon Lens 10-18mm; tinyurl.com/gnc...
Tripod for Canon; tinyurl.com/hdh...
Memory Cards; tinyurl.com/z8m...
Card Reader; tinyurl.com/z97...
Microphone, Cheap; tinyurl.com/hbx...
Microphone; tinyurl.com/zpj...
Canon G7X Camera; tinyurl.com/jkv...
Tripod for G7X; tinyurl.com/z27...
Mini Tripod; tinyurl.com/he9...
Mavic Drone; tinyurl.com/jfh...
360 Camera; tinyurl.com/jbm...
Andrew shows you many hints and tips that he has gained from his experience as a professional goldsmith.
Andrew Berry, a professional jeweller for 30 years, is the training director of www.AtTheBench.com, an award winning on line jewellery training website.
![ILLSLICK X YOUNGOHM - We're The same [Official Video]](http://i.ytimg.com/vi/yUJNkobYR0E/mqdefault.jpg)
This is by far the most helpful video about soldering I've ever seen. This answers all the frustrations I had upon past unsuccessful soldering jobs. I know after watching this that this is exactly where my issues are. My torch was not close enough to bring the piece up to temp to flow the solder - my slow and far away heating caused the solder to oxidize and just not flow - or I got so frustrated that I brought the torch in too close to where my seam was in the black hole of heat. I actually feel confident to try again - Thank you so much!!
I know, right? this is a well-earned subscription.
I've never heard the process explained better or demonstrated as effectively! Thank you!
I come from electronics soldering. While the idea of hearing the metal is the same, torches are very different from soldering irons. This video fills those gaps perfectly! Thank you!
I've got some experience from college classes and working for a high end goldsmith for years.
I'm now enrolled in the diploma course at the London Jewellery Academy. I felt the need to refresh my skills, learn new things and get back into it. However, I find myself regularly going to your channel for the precise, concise and informative videos you offer that always help fill in the gaps I find from my online tutorials. Their instructors are great but I find your level of instruction and delivery of the necessary information a perfect addition and a reliable source of trusted guidance. Thank you, you rock and have helped steer many a project back on the right path.
Just being told once was not enough for me and I don't suppose that it will be enough for most people, and when I get it right it still looks like magic. It's a good thing that you're patient and kind enough to repeat the basics a few times. So, thank you, Mr. Berry.
I am watching a lot of these for the second, and some, third time, because that's what it takes for the information to go in, for me anyway.
I'm brand new to this as you know, but interesting, the other day I was talking to a friend of a friend who is a jeweller with many qualificatios, and felt very comfortable talking about some techniques. She asked me where I had done my jewellery training. My friend, who had introduced me, laughed, because he knows I'm very new and done very little practically.
I told her, my teacher is Andrew Berry At The Bench. Pretty Cool. Thanks Andrew. I must got on with more.
So glad I found your channel, just starting out in jewellery making and your videos are clear, concise and informative. Thankyou!
That's a worthwhile lesson on how a torch focuses heat. I did not know. Thanks. :)
I have to say it pays to take the time to listen to these tutorials. I am usually in a hurry to see the jewellery being made rather than understanding the principals of how and why something works or doesn't work.
best explanation of Soldering ever. Applies equally to electronics and i assume plumbing as well. highly recommended.
I love how simple you explain things! And you show what you talking about not just describe it.
Seeing that black hole in the middle was the most valuable lesson in that subject. I can finally see what is going on in there, and what I'm doing wrong. Thank you!
The black hole remains the most interesting phenomenon in the universe! Thanks Andrew.
Thank you Andrew I was doing wrong heating directly the solder to flow, instead heating the metal ❤, appreciated your knowledge and expertise to help me to continue my hobby ❤
That was so informative! Thanks! I didn't know there was a 'dead spot in the middle of the flame. Thanks, Andrew.
Andrew thank you for these videos . They have been a great help to remind me how to do certain techniques and processes in making different piece’s.
Thank you! I spent so much time failing to solder a bangle. I managed in the end through trial and lots of error but I didn’t know totally what I did right. Watching this has taught me how to do it properly next time.
excellent demo of flame focus. Wonderful how you show it. everyone can do this to test and learn. thank you
best jewelry's teacher....! thank you Andrew..! for your time and efforts..! keep it up.
What a valuable lesson. Thank you Andrew for sharing this!
Thank you for this demo and showing the different size torches. Very helpful!!
serendipitously, this video came up just as I discovered this while fiddling about on my own! Haha, how fun!
Great explanation of where to find the sweet spot of the flame - thanks so much!
Thank you very much your video, extremely helpful. I don't make jewelry but do a lot of prototyping of special projects with stainless steel- very similar principals.
From a retired music teacher, excellent instructional techniques!
This was terrific information, as usual. Thank you Andrew. So much appreciated.
So glad I found you! I've tried a little soldering in the past, but it's so intimidating. Looking forward to getting it out again! Thank you:)!
Thanks for your guidance Andrew. 😊🌎✨
Very good instruction. You teach very necessary lessons in a manner that is easily understood. I really enjoy your videos and I've learned a lot from them. Thanks
Thanks for the tip, it makes it easier to explain. Was showing my son how to solder and this demonstration would help greatly.
OMG I found a Welshman for this! I could not be happier!
Gotta love that sweet spot 😉 cheers Andrew
Great, precise information. I am just starting out with soldering jewellery, so this presentation was extremely useful to me. Many thanks for taking the time to share your knowledge.
Thank you Sir. I am learning every additional thing I can while working from home due to COVID-19. (27 May 2020)
Incredibly important information on what part of the flame to use and where to place it.Wish I'd known this years ago!Thanks so much for sharing.
Good clear instruction that gives results 😁 Thank you & Merry Christmas 🎄
Thank you for thoroughly explaining the process of soldering with a butane torch!! I can't wait to make my first ring!! I got the Jeweler's Butane Torch from Eurotool. It looks a lot like the small torch you have there.
great work, Professor Berry. My thanks.
Such a clear explanation. Thank you
You're a wonderful teacher! Thanks so much!
wonderful lesson...really am doing much better with my soldering. thanks for sharing your knowledge...
You are a great teacher
You are such a great teacher! Thank you :)
Wow! Thank you for that very important piece of information! Very well explained and much appreciated. 👍😃
Love your videos! I have been learning lots! Thank you!
Well said. Very clear and understandable.
Thank you for your invaluable tips. Learning so much from your videos.
great info, thank you for your work
Well explained. I love your videos.
Love your youtube videos always lots of useful tips, you really make it easy to understand. Very informative
These videos are very interesting and, this has made it easier to choose a torch and , great tips about flame sweet spot ,
I’m going to purchase a max flame 🔥 butane torch as it has a larger flame , and it allows me to work o. Larger pieces and aneal larger projects , it’s more suitable for my needs .👍
I’ve soldered many a copper pipe & fitting but haven’t soldered jewelry. I’m anxious to try jewelry.
Great video!
I am learning a lot from you.
So.
You suggested I use paste and solder with a torch to weld 1mm Stainless Steel jump rings to Stainless steel rings.
But, what kind of torch is best?
Small or Large Butane?
Or like a bigger hose torch with Propane?
Thank You again.
Hi Andrew, great tip! Something that helped me on knowing where that sweet spot you talk about on the video is is listening to the torch, when you put it too close (close to that "cold" black spot to appear) it starts making a sizzle, a louder sound. Normally, once i hear that I pull back until the sizzle stops and that is the tip of the cone. I hope it helps!
Thank you for sharing!
I am SO grateful that you provide your expertise to us! This particular video really helps take the fear out of the flame for me.
I have 3 stacker rings (my first project on my own) pickled and ready for their joints to be soldered. I have just failed at soldering the first two and watched this video before I attempt the third. Fingers crossed it will solve my problem. PROBLEM: Ring is getting bright red hot (I fear melting it), but the solder isn't moving (pallion form: hard). The pallion is stuck to the soldering block (literally lifts some of the block up with it when I pick it off). AFTER THOUGHT: The rings are hammered with slightly organic edges (not smooth/straight). Maybe there's a tiny gap between the solder and the ring? Should I try laying the solder on top of the join instead of beneath it? I'm open to anyone's answers, not just Andrew's. THANKS!
You are a great teacher. Thank you.
Thank you ... I was wondering this topic exactly 👩🏻🏭... your videos are so useful 👍🏻👍🏻👍🏻👍🏻👍🏻
This is great information! Thank you!
Solved my problem. Thankyou ❤
Hi! What is your working time for the large butane torch, such as how long does the cylinder last before needing a refill?
Hello! Thanks for the video. What brings for big torch you recommended? Thanks you!
Great way to show! 👍
Thank you for shering i learning so much.
Thanks Andrew, great demonstration.
You are the best 👍👍👍
Thank you for your Tipps.
good edu with cool explain.thanks for this video🖒
I have the soldertec.
I got it to make smoked cocktails.
The problem I have is maintaining a steady flame when pointing the flame straight down.
Any advice?
Thank you so much for this information. I have learned something new and very important . You are a very good instructor 👍👍.
Great info, thanks!
Thank you so much. I am just starting and this information is invaluable.
Thanks Sr is any big torch with tinny adjust
You are very helpful. I watch many of your tutorials. Alas, I am so frustrated. I am trying to make simple copper jewelry out of copper. Bezels, bracelets, and the such. I am using 20 guage copper sometimes 18... I get the solder to melt into the groove, but after cleaning it breaks! Am I not getting the copper hot enough? Am I making the solder brittle with too much heat? I am uaing the small butane torch similar to yours and I would really appreciate your advice please.
I just made my first attempt at soldering since my only other experience forty years ago! I learned something, but didn’t get the solder to flow- I think it’s because the mini torch I bought from HarborF-- lacks the strength to put out a decent flame. I got a different type that attaches directly to the can of butane, so hopefully that one will work! This video should be a great help as well! Thank you!
Excellent explanation and demonstration on the use of these smaller torches for soldering. Cheers, #SeattleRingHunter
Hi Andrew, What torches are you using here, and which do you recommend for sterling silver?
nice . thanks for the refresher course
Very well explained! Is a torch like the bigger one capable of melting gold/silver ?
What do you use to unsolder rings?
Love the tips
You have a nice big one. I'm not sure here in Montreal cooking shops have this one. Did you get the big one it in a cooking shop?
Marco Polo Hi, no Marco, the larger torch was from a jewellery tools supplier.
Outstanding video. Thank you
Hello Andrew, is it possible to solder a bezel onto a backplate with a butane torch? I’m having trouble with it. I’m probably not heating it properly but just wanted to see if it was even possible or if I would need a propane torch?
Thanks for this valuable information!
Thanks, Andrew! Is the principle the same with acetylene/air torch? Any torch at all?
What's the brand name of the smaller butane torch? Do you have a website?
Thank you, I’m not heating the metal enough even though the solder is flowing. I’m using lead free solder does that make a difference?
Lead free? Are you using silver solder or plumbers solder. You must use solder that’s made for jewelry, not stained glass or pipes.
Excellent
Thank you for clarifying this for me... I am a newbie and still not a real confident solderer. I have also have a hard time hallmarking rings... Do you have video on that subject?
Mary Platt Hi Mary, can you explain more on the hallmarking? Is it just that you are having problems applying the stamps inside ring shanks yourself?
Andrew Berry Yes... I have tried to use the metal curved stamps but it is hard to steady the ring and hammer it... Also the marking comes out illegible or crooked...What tools do you suggest?
Thank you!
Very well explained. I think I know what I'm doing now! :)
wonderful.
Hi Andrew,
I really enjoy your videos and am learning a lot from them. I have 2 torches the same size as the ones you demonstrated. My larger one has started performing badly, it has a really blousy flame. I have tried bleeding and refilling it but still having issues. I have also read it is important to use high quality butane. I live in NZ and the range available is limited - so am using the best one I could find. I also cannot buy the large torch here, the one I have was from Amazon but they will no longer ship them to NZ. I would appreciate any other suggestions re getting my torch working again. It looks pretty clean and has not had a great deal of use - I was really happy with it so would love to get it working properly again. Thanks
thank you
Was really hoping you'd mention the brand of your torches. That's why I searched this video in the first place. I'm on my third failed torch. Need to find out which ones are going to solder .y silver for more than a month.
I’d certainly recommend Durston torches as they now sell both sizes
@@Atthebench thanks Brother. Super appreciate the quick response. Cheers
Question. I can not find the borax flux you always mention. what I see is a crucible and melting borax powder form. does it matter if it says for melting metal. soldering. and crucible? I'm trying to make a jump ring bracelet in the process of soldering each one. any tips. and also which butane is very effective to use that's not harmful
As always, a great lesson! One question though, I opted for using a H2O torch instead of gas because of my particular living situation aimed to safety and regulation. Could you tell why you don’t use one and benefits/downside of it? It seems the flame is soooo much hotter than the conventional torch so it’s tricky to master it. I like the fact that there’s no tanks to carry/recharge/EXPLODE, and the precision of the small flame it produces. I feel, with the right skills, it permits one to solder very tiny pieces like prongs and etc. I couldn’t get it to solder small tryout parts as they melted due to flame temperatures. I hope you can shed some light on this matter.
Again, thank you very much for your kindness and generosity.
Edson
I have a microflame machine but found it noisey. The flame was too small for those melting down jobs that we always do. I sold it with a few weeks and invested in oxygen and propane smiths little torch. I hardly ever change the tips because I can handle the heat of the flame with the mixture of gas and air and also with the direction of the flame. Each have their own advantages and disadvantages but for me the smiths little torch offers me the most flexibility from solder the cheapest thinnest chains right up to melting 100 grams and over using the same set up
Andrew Berry Thank you very much for answering. I was hoping you had more experience with them as I’ve spoken to a local jeweler and he also couldn’t tell me how to manage the heat vs flexibility but told me the guy he used to work with swears by those torches and is capable of doing anything with them. I just cannot have the oxygen acetylene tanks where I live. Thank you for answering!
Edson Andrade
Thanks again always helpful...
Well said Andrew!