GREAT video!! I'm so glad I watched this before tackling my door panel. Talking about pulling hard on the panel to remove it was perfect, as I probably would have spent an hour monkeying around trying to gently remove it. Also, having something there to catch the panel while you worked to remove all the plugs and cables was a super helpful hint! This saved me so much time and was the only video I needed to watch. Thanks for taking the time to post this!
Mirror installation was successful, with flying colors, and this video guide was integral to the success of my project. As a man of my word, #Subscribed!
Thanks Work Play Drive - changed out my door speakers on my 2018 Challenger SXT Plus this weekend. Everything worked out per your instructions. Couldn't done it without your great video
Once you know how to disassemble panels it's easy. The difficult thing is having the patience to figure out how to disassemble. Thanks for having the patience & creating the video. My Scat Pack door disassembly will be much easier thanks to Work Play Drive.
When you were popping the door trim off it sounded like you were making a major adjustment on my spine Hahaa!! Thank you for this video and all ur others!! You’re the BEST!!
This video was great, thank you for posting, helped me out a lot to take my tint off, just had a bit of trouble finding where that last light on the inside went
Super appreciate the video brotha! I had to pop the panel off as there was a loose piece in the window mechanics that was gouging into my tint when the window was rolled down. Ended up being one of the 2 nuts that hold the window track rail onto the door disappeared somehow 🤷🏽 saved me 175$ from the dealership!
Thank you for this video. My Challenger too had that annoying rattle in the doors. Your tip about tightening that screw was right on. Thank you for your thoroughness. Keep up the good work!!
Thanks for this WPD. That push pin clip art the front had me stumped! Funny that you mentioned the rattle in the passenger door. Had that EXACT SAME PROBLEM!!! Silly screw!
lol that thing drove me nuts for so long... Thankfully this one song really made it happen constantly so I was able to track it down. I really thought I had a blown speaker.
@@WorkPlayDrive I knew it wasn't my speaker. I thought it was something that broke loose inside the door. As soon as I removed the rubber cover in the pull handle, it was obvious that it was that screw.
The plug for the window with the lousy clearance is actually easy to plug in if you take the control pad/box out. It removes easily with a panel tool from the top and then the plug goes through the hole, plugs into the box and snaps right back in to the hole.
Hey your video helped me find the rattling problem. I though it was the speaker or something but it was just the washer for that screw on the door. Thanks!
Something about Spider's on Challenger's...I have a Spider that comes out my hood on my Windshield while I drive...the little sucker stays on even going over 60mph. It's now friend. Thanks for showing me how to remove these door panels. It's different from the Charger's
I'd like to add that this is very well done, helped a lot. Hope you have a video on how to remove the seats with no heater and install heated seats back in. I'm also going to have to take the airbags from the originals and put them in to the "new" seats.
Thx for the helpful video. I had to adjust the right window on my challenger so it wouldn't pinch the weather strip when the door was closed and I don't trust the dealer so I did it myself. BTW it is the same procedure on a 2020.
Dude thank you, I am getting ready to remove my mirror that got taken off thanks to the city and their brilliant fuckin placement of things! your camera work is really good able to see everything i needed to
Your videos are so good people will pay you to do commentary / installs I've learned a lot from your videos and I catch myself checking in to see if anything new has been uploaded.
Thanks man, if you know any of these people I'm for hire :) Looking for jobs in Hawaii for starters LOL I actually started reaching out to companies before I buy their products to see if they are interested in offering me a discount, I get quite a few wins in that category. It just gets awkward sometimes when the Product is no good and I tel them the video has been scrapped and the product is coming back. I'm very good about explaining why though and some manufacturers actually take my notes on the product improve it and send me the newer version for more constructive criticism.
I'm editing down an update video should be done tonight and hopefully posted. If you have it follow me on instagram for real time updates :) IG: workplaydrive. I usually post up my progress in real time or at the end of each day.
This video just reinforces the fact that I will pay someone to remove my door panels if I need. Great vid as usual. I agree with Derrick about the noise, I make it too, as if the car wasn't loud enough...;0
I respect people who know their limits, but at least you now know the work involved and can negotiate a fair price. I was at a Honda dealer getting service for my crosstour (didn't love it enough to spend the time working in it LOL) They wanted to charge me $125 to replace the cabin air filter. I asked why so much for a filter I can get on Amazon for $15, "he said it was labor intensive" I instantly youtubed it an found I needed to open the glove box, release the catch and swap the filter. took less than a minute. I showed him the video and said "I'll pass and do it myself".
Work Play Drive I just finished putting in the Kenwood KFC-XP6903C Excelon set, included the 6x9 for doors and 3.5’s for the dash. Huge difference from the base stock speakers, very pleased. The dash is quite bright sounding now, so actually running the treble -1 on the EQ. Def Leppard sounds great! I also have the Excelon X174’s for the back deck but probably throw those in tomorrow. Had a few hiccups with the doors, but your video was definitely a big help. I pushed that one clip through into the door just like you did, it goes straight through a bit too easily! Dropped the lock shaft down in the door when I was screwing it back on... gave me practice to take the panel off again I suppose!
Just bought my Challenger 2 months ago, and I noticed a little rattle and it’s bent driving me nuts. Great channel I’m be subbing and watch. Can you put up a link for where you got the door lock pull pins from.
Hey buddy. Thank you for taking the time to make this informative video! I’ll be changing out my factory speakers after the new year and was apprehensive about taking my interior apart but I’m no longer afraid! You make it look easy peasy!
Thanks, man, It was really informative. My challenger makes a weird noise when I turn on the music. Hopefully, it would be only that screw that you showed at very first.
Thank you it's awesome that you took the time to do this video to show people how to do this you saved me a lot of time and frustration thank you so much very helpful
Great video! I just realized that probably the annoying sound I hear from my door is not the speaker but the freaking screw losing up like you metioned there, I'll try that. Where did you get those door lock knobs? They look very cool.
Thank you, I drove around with that rattle for a few months LOL. The door lock knobs were my test pieces from billettechnology.net/ They are beautiful instagram.com/p/BT_n98Ll14E/ I instantly ordered more stuff from them. Because these items are made in house and in high demand there is a small wait for them, but I assure you it is so worth it. My plan is to dress the engine bay in Billet Tech parts. Catch can is on order in the same orange :)
Well, it worked…but the little plastic clips around the side are easy to break off - I lost two trying to get the door back on (a third I guess if you count ‘manning up’ and pulling the door cover off.
I have a rattle coming from underneath the lock pin, sort of. When I press my hand on the outside of the door, that like 3 inch gap between the inside and outside of the door, yknow, it goes away. Any idea what it could be?
Hey man, great video. I removed the whole door panel and having a problem I hope you can help with. The wire with the LED for the window switch illumination came all the way out and I cannot figure out where it came from. Can you shed some light on this?
Man that was a pretty informative video. I already wrapped my whole car but had to take a short cut and did the same thing you were about to do at the beginning of the video. I was able to remove the door panel but found it difficult to find the screws for the mirror. Did you have to role down the window to get to the mirror screws because I found it to be difficult as the window blocks your access to the mirror.
yup once the window is down the mirror screws are open, the arc of the windows clears the area with enough room for your hands and a ratchet. I know it's possible to do it without but I figured I would be less stressed with a door free of obstructions.
You are so awesome! I just got a 2015 scat pack and I have been dealing with the same exact issue; the screw making rattling noise. So I just tightend the screw and the noise is gone!!! I was so annoyed by that sound and you just made my life easier!! Thank you so much. By the way, is this permanently fixed? or do I need to keep screwing the screws whenever they are loosened up?
A year later it did NOT come back, I would assume you shouldn't need to tighten it again . I did take the door off for this video so it reset the timer. Glad to help!
The upper door lamp came off during removal and I don’t see where it is supposed to to go. It’s the last thing you plug in during reassembly except it’s still clipped together.
I came here because I have a super annoying driver side speaker rattle that stops when I rest my arm on the door. Going to go find my pry kit and I'll tell you if that washer was it!
I'll start keeping track, it's a lot of work, but I am also learning as I go. I expect as I get to the other side of the car it will go much quicker :) I will be doing dedicated Wrap update videos once I get some free time.
Do you have to disconnect the cables or can you just move the panel slightly back to get to the speaker? is there enough slack? I did that on another car and I was able to remove and install the speakers with no problem
That was one of my many concerns with this project, but after removing both door panels a few times I can say there are no issues with alignment, fitment and no rattles were introduced. I cannot tell in any way the panels have been removed. The clips are all over the place and there are a few alignment points that force the panel into the proper location before the clips engage.
@@WorkPlayDrive I’ve got a crease in my door essentially. I saw in your video the door is a shell. Inner half of the shell (the metal) would need to be removed in my case
Idk if anyone else has had this issue. But the white knobs on the inside of the door that snap in. They are supposed to come off with the panel once you pull it off. I can’t seem to figure out how to get them off and it’s impossible to get the door panel back on and secured as it’s just loose
I have a question?? I had my car worked on by a body shop and it seems like the door panel shakes when I close the door making a hollow sound. When the window is down I can see the inside door panel move does that mean it is not secured with the plastic fasteners??
it's possible, the only way to tell is to pop the door off. they may have missed a few or there is another issue. I pulled my door off a few times without damaging the clips
Hey brother, I'm subbed and watch every release. I got both of my door panels off thanks to you. But I busted one of the retainers in the process. Could you possibly link to amazon the correct size for the door panel retainer clips. And if its not too much trouble, also the christmas tree retainers that can be found in the trunk? Thanks. Great vids bro, keep up the good work
Thanks man I'll check them out. The purpose of me pulling the panels is to sound deaden the doors and upgrade the speakers. Have you thought about doing this?
Yes but the stereo going to be a while out, go-fast parts are currently being saved for. By the way this may be the clip you need for the door www.stevewhiteparts.com/oem-parts/mopar-door-trim-panel-fastener-6509673aa
Wrapping my buddies 2023 last call scatpack and just got the door trim off…. They left 2 of his cables disconnected 😂😂 wtf dodge. And how has this man never noticed it
Great video let me ask you my passenger side mirror is loose so I assume I can follow these steps but my question is are the 3 bolts assessable to simply tighten the mirror ? Or does all this have to be done just to get to the mirrors ?
Not sure man, I would say it's possible, but they did make quite a few changes to control the exhaust on the 5.7 that would most likely NOT be present in the 2016 current programming. Are you looking for more sound or something specific with the active exhaust? There may be an easier way to achieve your goal
Work Play Drive yes I was looking at electronic cut outs earlier from This website called quick time performance I ultimately want a system that I can control with a remote
The QTP kit is a good option for controllable sound. Most people (like me) who have the active exhaust have found ways to get around it. The active exhaust actually cuts down the sound. I'll be installing the NoWeeds Diverters in my scat pack in a few weeks. These are a bit more costly, but it's a DIY kit with some serious piping, clamps and motors and involves no welding. It also allows you to revert back to the stock exhaust. Hopefully this solution will give me the sound I want and it's adjustable so at speed I can tune to back down the unwanted drone.
It's on order and takes a few weeks for delivery noweeds.net/collections/dodge-challenger/products/noweeds-for-the-2015-dodge-challenger-hellcat. Not sure about the gains, Diverters cut the flow of the exhaust and route it all out a dump pipe after the cats, where cut outs are an exhaust "leak" that sends most of the flow out the cut out and the rest of the exhaust is still available. There are so many arguments on loss of back pressure vs less restriction my head is spinning. I'm getting it for the sound. If I have the opportunity I will dyno the car and do an Open/closed comparison.
Man. Why even bother watching other youtubers. You cover everything! I was wondering How to get my panels off to change the speakers. Although I came across this one by accident. Im actually looking for a video on removing the front A post trim. I want to run a cable from a shift light by my rear view mirror th rough the headliner down into the A post and then there's a side cover bellow that to the left of the steering wheel, I assume just pops off, to get the cable to the OBD port. Im worried about prying things wondering if there's a hidden screw. Like the 2 in your door panel video under those covers that arent visible.
wow! I've been looking for a super loud and obnoxious rattle in my passenger door for 2 months. it turned out to be the same screw you talked about here. saved me so much hassle. pm me your PayPal I'll send you $20
I'm started this channel to save fellow Challenger and other car lovers cash, (so we can spend it on worthy mods) no need to send me money. If you see a video that apples to someone else just remember my channel and share!
Great video, especially like the fact that you speak clearly the whole time.
Thank you
I’m so happy you are on TH-cam helping other challenger owners with some of the best how to videos. Thank you.
Thank you 🙏
Used both your videos to remove and replace my door mirror on my 2016 challenger, can't thank you enough, made life much easier
Glad to help Thank you!
GREAT video!! I'm so glad I watched this before tackling my door panel. Talking about pulling hard on the panel to remove it was perfect, as I probably would have spent an hour monkeying around trying to gently remove it. Also, having something there to catch the panel while you worked to remove all the plugs and cables was a super helpful hint! This saved me so much time and was the only video I needed to watch. Thanks for taking the time to post this!
Mirror installation was successful, with flying colors, and this video guide was integral to the success of my project. As a man of my word, #Subscribed!
🙏 thank you and glad to help
I was looking for a video explaining what’s the rattle sound on the door and here i found all the answers. Big thank you 🙏
Glad to help 👌
Thanks Work Play Drive - changed out my door speakers on my 2018 Challenger SXT Plus this weekend. Everything worked out per your instructions. Couldn't done it without your great video
Thank you and glad to help!
Once you know how to disassemble panels it's easy. The difficult thing is having the patience to figure out how to disassemble. Thanks for having the patience & creating the video. My Scat Pack door disassembly will be much easier thanks to Work Play Drive.
Thank you Bob, agreed the first time took a while, but when I do door #2 it's going to be cake!
When you were popping the door trim off it sounded like you were making a major adjustment on my spine Hahaa!!
Thank you for this video and all ur others!! You’re the BEST!!
I know it sounds scary 😧 which is why I backed out on previous attempts.
This video was great, thank you for posting, helped me out a lot to take my tint off, just had a bit of trouble finding where that last light on the inside went
This is the best door removal video on youtube for this vehicle hands down! Thanks man..
Thank you ☺️
This helped a ton. I’m wrapping my first wide body hellcat this weekend for a customer 🙏
Thanks for this video man! My window on my Challenger was misaligned and this video helped me so i could get to the window bolts. Big thanks!
Glad to help
Super appreciate the video brotha!
I had to pop the panel off as there was a loose piece in the window mechanics that was gouging into my tint when the window was rolled down. Ended up being one of the 2 nuts that hold the window track rail onto the door disappeared somehow 🤷🏽 saved me 175$ from the dealership!
Nice 💪
Good stuff. My warranty is over and looking to do most of the repairs myself.
Thank you for this video. My Challenger too had that annoying rattle in the doors. Your tip about tightening that screw was right on. Thank you for your thoroughness. Keep up the good work!!
Awesome glad I could help
Thank you Brother I have to remove my door panel on the passengers side to change out a damage speaker. Great video!
Thank you
Great video 👍 now i know what to do to replace my factory speakers in my 2015 challenger
Thanks for this WPD. That push pin clip art the front had me stumped! Funny that you mentioned the rattle in the passenger door. Had that EXACT SAME PROBLEM!!! Silly screw!
lol that thing drove me nuts for so long... Thankfully this one song really made it happen constantly so I was able to track it down. I really thought I had a blown speaker.
@@WorkPlayDrive I knew it wasn't my speaker. I thought it was something that broke loose inside the door. As soon as I removed the rubber cover in the pull handle, it was obvious that it was that screw.
The plug for the window with the lousy clearance is actually easy to plug in if you take the control pad/box out. It removes easily with a panel tool from the top and then the plug goes through the hole, plugs into the box and snaps right back in to the hole.
You are my go to guy when it comes to the Challenger
Thanks man, glad to help
Hey your video helped me find the rattling problem. I though it was the speaker or something but it was just the washer for that screw on the door. Thanks!
I cant believe how many people are having this issue, you're like the 20th person who message me about this one screw . Glad to help!
Your son makes the same noise I make when I drive my scat pack >.<
Great video!
Something about Spider's on Challenger's...I have a Spider that comes out my hood on my Windshield while I drive...the little sucker stays on even going over 60mph.
It's now friend.
Thanks for showing me how to remove these door panels. It's different from the Charger's
That little eight legged monster is a speed addict 😁
I'd like to add that this is very well done, helped a lot. Hope you have a video on how to remove the seats with no heater and install heated seats back in. I'm also going to have to take the airbags from the originals and put them in to the "new" seats.
Nope no video on that one sorry
Thx for the helpful video. I had to adjust the right window on my challenger so it wouldn't pinch the weather strip when the door was closed and I don't trust the dealer so I did it myself. BTW it is the same procedure on a 2020.
Glad to assist 💪
Thanks for the help. I was afraid to remove the door panel. You made it look easy.
No problem, once you know how to do it the process really is very easy
Dude thank you, I am getting ready to remove my mirror that got taken off thanks to the city and their brilliant fuckin placement of things! your camera work is really good able to see everything i needed to
Sorry for your mirror but Glad I can help 💪
Your videos are so good people will pay you to do commentary / installs I've learned a lot from your videos and I catch myself checking in to see if anything new has been uploaded.
Thanks man, if you know any of these people I'm for hire :) Looking for jobs in Hawaii for starters LOL
I actually started reaching out to companies before I buy their products to see if they are interested in offering me a discount, I get quite a few wins in that category. It just gets awkward sometimes when the Product is no good and I tel them the video has been scrapped and the product is coming back. I'm very good about explaining why though and some manufacturers actually take my notes on the product improve it and send me the newer version for more constructive criticism.
Work Play Drive how is the wrap coming along? I've been patiently waiting for some new videos lol
I'm editing down an update video should be done tonight and hopefully posted. If you have it follow me on instagram for real time updates :) IG: workplaydrive. I usually post up my progress in real time or at the end of each day.
Work Play Drive will do my guy.
This video just reinforces the fact that I will pay someone to remove my door panels if I need. Great vid as usual. I agree with Derrick about the noise, I make it too, as if the car wasn't loud enough...;0
I respect people who know their limits, but at least you now know the work involved and can negotiate a fair price. I was at a Honda dealer getting service for my crosstour (didn't love it enough to spend the time working in it LOL) They wanted to charge me $125 to replace the cabin air filter. I asked why so much for a filter I can get on Amazon for $15, "he said it was labor intensive"
I instantly youtubed it an found I needed to open the glove box, release the catch and swap the filter. took less than a minute. I showed him the video and said "I'll pass and do it myself".
Love the details & camera angles! Thank you so much brotha 🤙🏽
Glad to help 🤘
very well done great info
Thank you 😊
Great Job Buddy! keep em coming....
Thanks for the love brother!
Thanks buddy.
Swapping out speakers so this was good info.
How does the Stock radio with new speakers sound.
Work Play Drive I just finished putting in the Kenwood KFC-XP6903C Excelon set, included the 6x9 for doors and 3.5’s for the dash. Huge difference from the base stock speakers, very pleased. The dash is quite bright sounding now, so actually running the treble -1 on the EQ. Def Leppard sounds great!
I also have the Excelon X174’s for the back deck but probably throw those in tomorrow.
Had a few hiccups with the doors, but your video was definitely a big help. I pushed that one clip through into the door just like you did, it goes straight through a bit too easily! Dropped the lock shaft down in the door when I was screwing it back on... gave me practice to take the panel off again I suppose!
@@rockhopper01 Glad to have helped and awesome to know, I think this winter I may upgrade the speakers ;)
Just bought my Challenger 2 months ago, and I noticed a little rattle and it’s bent driving me nuts. Great channel I’m be subbing and watch. Can you put up a link for where you got the door lock pull pins from.
Hey buddy. Thank you for taking the time to make this informative video! I’ll be changing out my factory speakers after the new year and was apprehensive about taking my interior apart but I’m no longer afraid! You make it look easy peasy!
Glad to help you ditch that fear. I was the same way
Very nice and helpful Detailed video ,thank you sir
Thank you 🙏
Good job man, I’m doing mine this weekend.
You have been a great help. I need to find a few noise making spots on the passenger side of a 2021, so pulling the panels is part of that. Thank you!
Glad to help
thank you for your video, also for your character. it reminds me to stay calm in stress.
High stress IT job trained me well, most of the time, I hold it down and stay chill. But like everyone I have my moments.
Ever had any problems with the smart windows? My driver side window won’t seal all the way when it goes up, any suggestions?
Very helpful video! I also had the same issue with the puddle light plug. Thanks
Thank you and Yes that thing is a pain!
Thanks, man, It was really informative. My challenger makes a weird noise when I turn on the music. Hopefully, it would be only that screw that you showed at very first.
Yeah that one drove me crazy for a few months. So happy I finally found it.
It was same screw. I'm glad that I didn't had to open whole thing. Thank you.
That's awesome! Glad to help!
Awesome video. Thanks man
Glad to help.
Very good video! Thanks!
Thank you 🙏
Putting the door back on is an honest pain , I didnt feel like taking the other door apart cux of this
awesome video I appreciate your time to make this. good job ....
Thank you 🙏
There is also a light in the door panel near the handle that could be used to power the El Wire.
Thank you it's awesome that you took the time to do this video to show people how to do this you saved me a lot of time and frustration thank you so much very helpful
Thank you, glad to help
Great video! I just realized that probably the annoying sound I hear from my door is not the speaker but the freaking screw losing up like you metioned there, I'll try that. Where did you get those door lock knobs? They look very cool.
Thank you, I drove around with that rattle for a few months LOL. The door lock knobs were my test pieces from billettechnology.net/ They are beautiful instagram.com/p/BT_n98Ll14E/ I instantly ordered more stuff from them. Because these items are made in house and in high demand there is a small wait for them, but I assure you it is so worth it. My plan is to dress the engine bay in Billet Tech parts. Catch can is on order in the same orange :)
Great video 👍
Thank you 🙏
Thanks for the vid. I just bought a 13 rt and inside passenger door latch won’t open door. This vid helps. I’m guessing that cable isn’t connected.
Glad it helped
Well, it worked…but the little plastic clips around the side are easy to break off - I lost two trying to get the door back on (a third I guess if you count ‘manning up’ and pulling the door cover off.
Question, if I want to replace my door arm rest, do I have to take off the whole door panel?
I have a rattle coming from underneath the lock pin, sort of. When I press my hand on the outside of the door, that like 3 inch gap between the inside and outside of the door, yknow, it goes away. Any idea what it could be?
Does that cable for the door handle makes it unlocking and lock?
Thank you so much, man!
Glad to help 💪
Hey man, great video. I removed the whole door panel and having a problem I hope you can help with. The wire with the LED for the window switch illumination came all the way out and I cannot figure out where it came from. Can you shed some light on this?
Did you figure it out
2:42 What screw size is this? I have rattling in that area, I need to buy the screw driver but can figure out the size.
excellent video - thank God for u-tube-
🧡
Man that was a pretty informative video. I already wrapped my whole car but had to take a short cut and did the same thing you were about to do at the beginning of the video. I was able to remove the door panel but found it difficult to find the screws for the mirror. Did you have to role down the window to get to the mirror screws because I found it to be difficult as the window blocks your access to the mirror.
yup once the window is down the mirror screws are open, the arc of the windows clears the area with enough room for your hands and a ratchet. I know it's possible to do it without but I figured I would be less stressed with a door free of obstructions.
Work Play Drive awesome!! Thanks a lot for the advice bud. Cheers.
Can the rearview mirror be replaced through here ?
The side mirror? yes
@@WorkPlayDrive meant that sorry, i just did it 30 min ago thank you. Those nuts where 8mm..would have thought they were 10s all along. Thank you.
Wait.."Get out of here what?" What did you call the spider?
Really Tho!
Right, fuck was up with that smh
You have some brass man - I would never be able to do this kind of stuff. I would mess it up so bad.
Thank's man, I've been a hands on guy my whole life, my day job has shifted away from that so this car is my outlet.
Similar problem. My door rattles when I drive. I have a 2017 Charger. Is it similar? Any tricks or booby traps? Great video. Tnx!
Not sure haven't messed with a Charger door yet Sorry
Hello can you post a vid on how to remove / replace gear shift bezel assembly? Thank You
You can find that in my Barton Shifter install video th-cam.com/video/Ue6nFhkKF0I/w-d-xo.html
Life saver 👍🏽
Glad to help!
You are so awesome! I just got a 2015 scat pack and I have been dealing with the same exact issue; the screw making rattling noise. So I just tightend the screw and the noise is gone!!! I was so annoyed by that sound and you just made my life easier!! Thank you so much.
By the way, is this permanently fixed? or do I need to keep screwing the screws whenever they are loosened up?
A year later it did NOT come back, I would assume you shouldn't need to tighten it again . I did take the door off for this video so it reset the timer. Glad to help!
Can you remove the cup holders for the door panels????
I’m not sure sorry.
You think it’s possible to change a 2014 and below panel or door itself for a 2015 and up?
The upper door lamp came off during removal and I don’t see where it is supposed to to go. It’s the last thing you plug in during reassembly except it’s still clipped together.
can the doors still be open and closed when panel is off. Couldnt see if the handle stayed on..
Yes but you need to leave the window open so you can reach the pull on the inside.
I came here because I have a super annoying driver side speaker rattle that stops when I rest my arm on the door. Going to go find my pry kit and I'll tell you if that washer was it!
So far quite a few people have said this was their issue. good luck!
I was able to just pry it up with my fingernail and tighten the screw. No more rattle! Thanks again.
Awesome!
Please update us with the man hours it took to complete the wrap and your final thoughts
I'll start keeping track, it's a lot of work, but I am also learning as I go. I expect as I get to the other side of the car it will go much quicker :) I will be doing dedicated Wrap update videos once I get some free time.
Work Play Drive your the man I don't think I could tear apart my baby lol...
Do you have to disconnect the cables or can you just move the panel slightly back to get to the speaker? is there enough slack? I did that on another car and I was able to remove and install the speakers with no problem
not sure, I didn't even try. I figured I was this far why not give myself the room and get the panel out of the way.
The first two cables he took out will give you enough room imo.
I’ve often heard that after removing and replacing the panel that it “never is quite the same” did you feel this way as well? Or could you even tell?
That was one of my many concerns with this project, but after removing both door panels a few times I can say there are no issues with alignment, fitment and no rattles were introduced. I cannot tell in any way the panels have been removed.
The clips are all over the place and there are a few alignment points that force the panel into the proper location before the clips engage.
Work Play Drive ok that makes me feel better thank you so much!
Possible to strip the door down to nothing in order to bang out a dent ?
Yes but may not be necessary with a hood set of dent removal tools.
@@WorkPlayDrive I’ve got a crease in my door essentially. I saw in your video the door is a shell. Inner half of the shell (the metal) would need to be removed in my case
If I remember correctly the inner shell is welded in. You hopefully can get through all the large openings. 🤞
Idk if anyone else has had this issue. But the white knobs on the inside of the door that snap in. They are supposed to come off with the panel once you pull it off. I can’t seem to figure out how to get them off and it’s impossible to get the door panel back on and secured as it’s just loose
I have a question?? I had my car worked on by a body shop and it seems like the door panel shakes when I close the door making a hollow sound. When the window is down I can see the inside door panel move does that mean it is not secured with the plastic fasteners??
it's possible, the only way to tell is to pop the door off. they may have missed a few or there is another issue. I pulled my door off a few times without damaging the clips
Yo thank you I used this to do my speakers on both doors
Awesome glad to help. What did you wind up going with for speakers 🔊 sound upgrades is one of the mods on my list. Is it a Major difference?
Work Play Drive I went with a 4 piece 920 Watt Pioneer sound system
Nice I’m a big fan of pioneer premier audio components.
Is this the same way for a 2017 Dodge Challenger❓
Paco Aldape yep
Hey brother, I'm subbed and watch every release. I got both of my door panels off thanks to you. But I busted one of the retainers in the process. Could you possibly link to amazon the correct size for the door panel retainer clips. And if its not too much trouble, also the christmas tree retainers that can be found in the trunk? Thanks. Great vids bro, keep up the good work
Not off hand sorry try Www.stevewhiteparts.com give them a call and describe the clips you need. They will be able to assist.
Thanks man I'll check them out. The purpose of me pulling the panels is to sound deaden the doors and upgrade the speakers. Have you thought about doing this?
Yes but the stereo going to be a while out, go-fast parts are currently being saved for. By the way this may be the clip you need for the door www.stevewhiteparts.com/oem-parts/mopar-door-trim-panel-fastener-6509673aa
Wrapping my buddies 2023 last call scatpack and just got the door trim off…. They left 2 of his cables disconnected 😂😂 wtf dodge. And how has this man never noticed it
Who needs window and mirrors when you are going faster than everyone else 😏
Kinda disappointed we didn't get a look at the spider... :(
😂😂
I wanted to see the spider bro
Ok so problem the “screw” in my door pocket isn’t a screw how do I get it out of there
Same
Sonic Sway I got a socket wrench came
right out
subscribed!!!
Thank you!
Great video let me ask you my passenger side mirror is loose so I assume I can follow these steps but my question is are the 3 bolts assessable to simply tighten the mirror ? Or does all this have to be done just to get to the mirrors ?
You should use the channel locks correctly.
Ok
Off topic but do you have a twitch account for online gaming?
not yet, I only game 1 night a week and now that it's car season it's becoming 1 night a month. I may set something up in the winter.
Is there a way to install the active exhaust from 2017 on a 2016 challenger RT?
Not sure man, I would say it's possible, but they did make quite a few changes to control the exhaust on the 5.7 that would most likely NOT be present in the 2016 current programming. Are you looking for more sound or something specific with the active exhaust? There may be an easier way to achieve your goal
Work Play Drive yes I was looking at electronic cut outs earlier from This website called quick time performance I ultimately want a system that I can control with a remote
The QTP kit is a good option for controllable sound. Most people (like me) who have the active exhaust have found ways to get around it. The active exhaust actually cuts down the sound.
I'll be installing the NoWeeds Diverters in my scat pack in a few weeks. These are a bit more costly, but it's a DIY kit with some serious piping, clamps and motors and involves no welding. It also allows you to revert back to the stock exhaust. Hopefully this solution will give me the sound I want and it's adjustable so at speed I can tune to back down the unwanted drone.
Work Play Drive any performance gains? and do you have a link to the build
It's on order and takes a few weeks for delivery noweeds.net/collections/dodge-challenger/products/noweeds-for-the-2015-dodge-challenger-hellcat.
Not sure about the gains, Diverters cut the flow of the exhaust and route it all out a dump pipe after the cats, where cut outs are an exhaust "leak" that sends most of the flow out the cut out and the rest of the exhaust is still available. There are so many arguments on loss of back pressure vs less restriction my head is spinning. I'm getting it for the sound. If I have the opportunity I will dyno the car and do an Open/closed comparison.
Man. Why even bother watching other youtubers. You cover everything! I was wondering How to get my panels off to change the speakers. Although I came across this one by accident. Im actually looking for a video on removing the front A post trim. I want to run a cable from a shift light by my rear view mirror th rough the headliner down into the A post and then there's a side cover bellow that to the left of the steering wheel, I assume just pops off, to get the cable to the OBD port.
Im worried about prying things wondering if there's a hidden screw. Like the 2 in your door panel video under those covers that arent visible.
Using the channel locks in the wrong direction......sigh. You're fired!
wow! I've been looking for a super loud and obnoxious rattle in my passenger door for 2 months. it turned out to be the same screw you talked about here. saved me so much hassle. pm me your PayPal I'll send you $20
I'm started this channel to save fellow Challenger and other car lovers cash, (so we can spend it on worthy mods) no need to send me money. If you see a video that apples to someone else just remember my channel and share!
3:33 😂😭😭😭
😏
Get out of here WHAT?
?? Sorry don’t understand the question?
Please disregard my comment. Wrong post. Sorry.
Damn good video! Thanks bro!
Watts is the first proce