Civic VTi D16 | Ph16a Full Rebuild in 15 minutes and Start-Up
ฝัง
- เผยแพร่เมื่อ 18 ก.พ. 2024
- For a more in-depth and technical shop tips, dyno and tuning info
Join our channel for lesson like tech and tuning tips
/ @srdmotorsports
Lets rebuild a local VTi engine from the ground up until start up and drive
Lucky the owner acquired the vti that had a very very fresh conditioned block despite the smoking issue everything checked out fine and well prior to machining of deck surfacing and honing
Everything checked out good in STD form so no unusual machining required
The disassembly and inspection of the engine as the car arrived is here
A really good tear down video and we constantly have shop updates at our page so it is something you guys should check out at
/ srdms2
our Instagram is also up and active and follow us at
/ ralfsrdms
Tiktok is definitely something you should check and follow and its
/ srdmotorsports
Civic VTi D16 | Ph16a Full Rebuild in 15 minutes and Start-Up
d16y8
Civic VTi D16 Ph16a Full OEM Rebuild in 15minutes
Civic VTi Ph16a Full OEM Rebuild in 15minutes
Civic VTi D16/Ph16a Full OEM Rebuild in 15minutes
Honda vti bigote
honda civic bigote
honda civic vti
#VTi
#SRDmotorsports
#d16y8 - ยานยนต์และพาหนะ
This is amazing work. Im looking to rebuild my d16 and this video breaks it down very easy. Pinoy gang up
Glad it’s of good help man! And yeah this video covers some details that most rebuilds got to check on with
👍 im rebuilding my D16y5 this explains a lot ✊🏼
That’s awesome to know
I love it Sir. Very transparent and honest work. Hope my VTI 96 engine will refresh to. Great and awesome works.
Thanks thanks 🎩
Really love these OEM rebuilds, thats a healthy single jingle!
You and me both sir!
Great 👍 Thanks
no probs 😎
Your builds are always awesome, attention to detail is insane, I only found ur channel not long ago and I've watched all the d series videos, definitely signing up for gold brother! You gota be my favourite builder on TH-cam, you know ur stuff 100percent
Oh thank you man! I’m glad they’re mostly good stuff for you… I mean I try and also super glad some comments are also questions that tend to help me improve the next upcoming video simply cuz they asked about something
And I can cover it next 😎
Clanliness comes a long way in assembling engines.
I S T R O N G L Y A G R E E 👍💪🙂
Reminds me of my block surface.. smooth like silk👍
Did you do some headworks there..? I can clearly see.. hahaga
It was weirdly ported so I had to clean it up a bit to make it atleast work sensible bahaha
@@SRDmotorsports clean deeper as you mean.. hahaha
It was very unequal kase 🤣
Great work as always that thing is very smooth and clean
Yes sir 😎
Love your videos very informative and easy to understand
Anytime i watch one of these single cam d16's on your channel i get the itch to attempt my first engine rebuild!
Still not sure im ready but the more i watch the more im convincing myself to try aha
Watching from south Australia 😊
Oh I’m glad it’s helping out in a good way like that! That’s defo a good way as it inspires :)
Your attention to detail is top notch! Money well spent 🇵🇭 👌🏼
thanks brother! I think the cause n effect came from starting as a hobby on my own car cuz I enjoyed it and that never went away, the enjoyment 🤣
Many suggests to upgrade my block to D15b due to minimal ''Kalog" sound that I believe is coming from the bore, But I believe if my ph16a is to be rebuilt by you, it'll come back to it's miracoulous condition. I'll be there soon. I promise!
all engines with proper piston to wall has kalog 😂 plus the cost of surplus block + the cost of LTO change engine papers that’s actually more than the cost of a rebuild
btw what year Vti is yours and what city are you in?
@@SRDmotorsports '96 VTi all stock including box. I'm from Lipa Batangas but taking the car on your location shouldn't be a problem. Btw what are your Mode of payments? Cash lang ba or you take Credit Cards? haha my impulsive self might pay a visit sooner if may card payments ka lol
@@typeeff that’s nice “tunay” ba stock
Mode of payment just bank deposit or cash unfortunately no credit cards (mapipilitan mag taas pag ganon 😂)
@@typeeff also to follow up my reply… 95% of the time it isn’t full payment up front … usually it’s madalas 50-55% Upon bringing the car and the rest is when it’s finished upon car pick up…
@@SRDmotorsports god gave me a sign na ipunin muna funds. Haha sometime this year. I’ll look forward to meeting you sir! 🫱🏼🫲🏻
Like your videos a lot mate. Best wishes from Germany…Alex
Oh man! Glad to know that! Thanks brother 😎
0.0015" main bearing clearance 👍🏾
Yes sir!
🥰🥰🥰
Glad you liked this one :)
Sir, My MAP sensor is leaking something. I don't have any CEL. I also cleaned the TB and IACV but to no avail the idle is still rough.
As i check the Sparkplugs it seems like my engine is Rich.
Is it possible that my MAP sensor is faulty but not having CEL?
It should have a CEL
what is the code for main head gasket on ph16a engine.please provide sir.ty
@@JayJay-il3pi same lng p2j and p08 BASTA steel gasket we use federal with no problems
Madami nka honda pag pumalpak wala umaamin
Sir, I got a problem on my Civic
After i adjust the distributor it seems like the tune burned on my chip is gone. No vtec, No Launch Control.So my mistake is when i adjust the distributor i didn't put it in scs mode. Can it be solve by mechanical tuning?
Tune won’t go away naman or won’t be deleted just like that
what did you mean by adjusting a half tooth off ??
y series and z series camgears are half a tooth off or 4.5deg off… like example
D16z6 oem camgear vs d16y8 camgear they are half a tooth off… = so on aftermarket adjustable camgears this must be considered
Boss nka ph16a vtec aq n enging plano k mg palit ng zc engine block center dipstick worth it b un pg ng palit?
Kung wala problem ph16a not worth it same 1600cc block naman eh masyado lng overhyped zc but both block is 1600cc
may zc na esi may zc na vtec pareho 1600 pero sure hyped ng seller
@@SRDmotorsportspplitin n ksi ang block manipis n ang lining at m bitak..ng ddlawang isip lng aq kng ano ms mgnda n ipalit zc center dipstick b oh ung db15
same if u see the many sohc blocks I built na video half nun manipis na “outside” ng lining…. This happens kase dati d nka coolant
Inde ung steel liner/lining or sleeve ung manipis
Lahat naman ng masa vid all runs good til now
Good evening sir. Pwede po mag tanong? Ano po ang torque ng head studs? 1996 vti Ph16a po. Thank you.
nasa shop manual online… 53ft lbs… pero khit 40ft lbs lng wala issue kung tama pag assemble same as khit mag 60 ka if sablay ? Singaw pa din
@@SRDmotorsports ok sir salamat sa reply.
No prob
Boss ano possible cause nagkakaoil sa exhaust number 3? Nagkakaoil din yungsparkplug yung png 3 lang thanks
Beetween head and exhaust manifold kaka overhaul lang ng unit
Pero di naman masyado madami yung oil boss
madalas people would say valve seals daw khit sa PADEK… pero the fact na pati plugs get fouled it’s most likely piston rings kung number 3, I mean khit bago… possible install error…
I mean d na Nashare or post sa PADEK fb group pero Meron dun ganun kilala dun na builder pero when owner decided ipacheck sa iba dalawang piston baliktad ung piston ring 🤣
@@SRDmotorsports okay boss thankyou❤️
Take note tumakbo pa sa ndra (Clark) ung example ko and kase mabagal pina check sa iba and ayun findings… (nka takbo na and wala smoke pero ganun)
Kya after? Ayun for sale mga parts sa PADEK 🤣
Where is your shop located?
It says in the shop page, Antipolo
Sir di naman namention how much exactly yung cost ng rebuild? Currently experiencing I think same issue kaya im trying to prepare myself for the possible gastos 💀
It will never be exactly… pero as mentioned it would range from 50-55k
kaya never exactly the same? Kase never din naman sinabi true issue until pag nabuksan
-no overheat exp daw pero pag bukas Los thread head stud? = extra cost
-pag check crank no issue daw pero pag bukas na pa repair na pla kunya ng pulley
2:10
sir tips naman pano gawin mas fuel efficient ganitong engine
Most of my sohc videos dito yan naman ung goal and share ko, check it out
@@SRDmotorsports yes sir very informative lahat nang vids mo recently got my vti and nabusog ako sa knowledge sa mga content mo mote power sir ! hoping na may guide sa valve clearance setting para sa ph16a and tuning the airscrew and screw sa iacv 🤩
@@SRDmotorsports and tanong kona din po meron ako nafefeel na jerking or boging during cruising and sa idle bogging un idle crusing nararamdaman ko around 2k rpm steady already changed my fuel pump filter nacheck nadin dizzy and htw and na calibrated nadin tps and cleaned tb and map sensor still d kopadin mahule any ideas or tips sir
@@SRDmotorsports right now eh yng full tank ko po nakaka kuha lang sya nang around 230km not sure if tipid or not first time kopo kasi magka civic
@@SRDmotorsports and last thing po parang lowpower sya pag naka on aircon