Thanks Vlad, probably the most useful, easily understood, and enlightening tutorial for beginners I've come across yet - Thanks! What I appreciated most was your commentary that talked through each action, using specific names of functions and parts instead of generic terms like, "this guy, over here, I'm just gunna go do this, etc. etc." which only frustrates the fire out of me when I'm listening to other tutors. I've subscribed!
Thanks Dave. I really appreciate the nice comment and feedback. It's good to know that being specific with function names and parts are very helpful. I'll keep that up.
When you first read the question, my first thought was 'I think I know most of this' (but that never stops me watching). I was completely wrong. It turns out I knew very little. Yet again, you've shown me a ton more functionality. Great work Vlad and thank you.
I bookmarked and saved this instruction. There is so much good stuff for a rookie like me, and I can follow it clearly because of the good timing and the commentary.
Thanks garagemonkeysan. Yeah, I try to avoid using hot keys on my tutorials. I remember how frustrating it was when I was learning Fusion 360 and trying to follow tutorials that used them.
Greay Vladimir, finally a good explanation of the differences Extrude vs Press pull! From now on I’ll use press pull much more! Thanks a lot for this quick tip!
I hate you! Why didn’t I experiment with that. Extremely well presented, only just discovered you and subscribed immediately. Best regards from England.
One other note: Using the press/pull on a "hole/cutout" you will NOT get the option to "cut/join/..." So you just end up just moving the face. With extrude on the same face, you get the option to cut, join, etc.
You started strong and once you jumped into Fusion360 all the audio became mumbling. Just an observation. Keep up the .........(trails off into mumbling) lol
Hi, I use Fusion 360! When I use the arrow to Prees/Pull, the value change with a step of 5mm. I want the value to change with a free step. How can I whange this parameter?
This is the first video of yours I have watch and I am impressed. You taught be some very useful things in a brief period of time.
Now if I can just remember this!
Best explanation I’ve seen for this!
Thanks Parts Dave!
Thanks Vlad, probably the most useful, easily understood, and enlightening tutorial for beginners I've come across yet - Thanks! What I appreciated most was your commentary that talked through each action, using specific names of functions and parts instead of generic terms like, "this guy, over here, I'm just gunna go do this, etc. etc." which only frustrates the fire out of me when I'm listening to other tutors. I've subscribed!
Thanks Dave. I really appreciate the nice comment and feedback. It's good to know that being specific with function names and parts are very helpful. I'll keep that up.
When you first read the question, my first thought was 'I think I know most of this' (but that never stops me watching). I was completely wrong. It turns out I knew very little. Yet again, you've shown me a ton more functionality. Great work Vlad and thank you.
I'm an F360 n00b so this was really helpful
Thanks Spike. Glad you kept watching.
Oh super helpful! I've been using Fusion 360 for over 3 years and didn't understand the nuances of Press / Pull. Thanks!
I bookmarked and saved this instruction. There is so much good stuff for a rookie like me, and I can follow it clearly because of the good timing and the commentary.
These short 360 videos are great. Glad you don't use hot keys. Thanks for sharing! : )
Thanks garagemonkeysan. Yeah, I try to avoid using hot keys on my tutorials. I remember how frustrating it was when I was learning Fusion 360 and trying to follow tutorials that used them.
I like when you teach me something that I've overlooked 1000 times. Keep up the fusion videos! Very helpful
Glad to hear Francis. Thanks
Basically logged in my brain now that its a way to thicken curved surfaces. Thx pal
You're welcome!
Greay Vladimir, finally a good explanation of the differences Extrude vs Press pull! From now on I’ll use press pull much more! Thanks a lot for this quick tip!
Thanks John, glad you found it helpful. More to come!
wow! thank you! you just made my day with these real-life examples! fantastic!
As said below, excellent. concise, short and clear. It's pleasant to learn with you. Many thanks from France
Great explanation. Easy to follow and no fluff. I wish I had more than 1 thumbs up to give.
Thank you very much Sir, finally I understood the difference between these 2 tools.
This is a simple and EXCELLENT demonstration and explanation. Thanks.
well done a no nonsense teacher right to the point Thanks
Thanks Keith!
Excellent answer to this noob question, exactly what I was looking for!
Thank you Desktop Makes I understood the difference
Thanks Piyush Palsania. Glad you found it helpful.
As always, excellent. concise, short and clear!
Excellent! Thank you so much! I didn't know there are so much differences between the 2 tools before!
Extremely clear demonstration! Thanks a lot!
Thanks!
Another excellent, clear and concise video Vlad... thanks!
Thanks markustube!
GREAT examples and CLEAR explanation. Quick end straight forward!
I am just learning Fusion 360, thanks for the video, it was very helpful.
Glad to hear it Alexey. 👍
Thanks Vladimir, really well explained
Thanks Jaytee.
thx. it helped me in a crucial time.
I hate you! Why didn’t I experiment with that. Extremely well presented, only just discovered you and subscribed immediately. Best regards from England.
Good, concise video. Good job, thanks!
That was great, saved me a lot of time!
Very nice explanation
Thanks David!
Very clear and helpful
One other note: Using the press/pull on a "hole/cutout" you will NOT get the option to "cut/join/..." So you just end up just moving the face. With extrude on the same face, you get the option to cut, join, etc.
Very nice video, thank you.
how deep into fusion do you go? surface modeling, patch work space, forms?
Very nice. Very helpful
Perfect! Thank you! Exactly what I needed. :)
very well explained, learned a lot.
Thanks!
In Press-Pull, what is the "Automatic" option used for?
Thanks for the video.
Good question Ron
Thanks 🤩
Excellent! Thanks.
Im still learning as I go.
another great video, thank you
Thanks Adam
subbed
Glad to have you Ponte. Enjoy the channel!
Thanks ! Very usefull video !
One video on engine assembly parts.
You started strong and once you jumped into Fusion360 all the audio became mumbling. Just an observation. Keep up the .........(trails off into mumbling) lol
Hi, I use Fusion 360! When I use the arrow to Prees/Pull, the value change with a step of 5mm. I want the value to change with a free step. How can I whange this parameter?
Hi RehabLab, instead of pulling the arrow simply type in the distance you want to press/pull.
Ok, I find the solution. I had to deselect themode 'Increment Move'
Ooo man. Thank you!
Maybe go over knurling?
Cool :)
Thanks Rob
burber binf but betis