Yo thank you so much. I bought a bunch of those fans for a Lian li case, but they were all facing the wrong way. Never thought to flip them around like that. Looks really clean
Can you please do a review on CoolerMaster ARGB Controller vs CoolerMaster ARGB Controller A1 and let me know if both will worth other branded AIOs and fans and allow Individual LED control and Brightness control Note: Found that the old CoolerMaster ARGB Controller allows other branded AIO and fans to control lighting but no idea about individual LED and brightness Found the new CoolerMaster ARGB Controller A1 allows control of individual devices even if they are daisy chained but not sure if it will work with other brands
@@efrdx2239 no u can use a 3 pin argb extender it will mulitply the no of fans u can connect and then u can directly connect them to mobo's female argb header
I need help I have 9 of those fans the thing that causes me problems with the argb how did you connect them? Did you use the controller that comes in the box or do you connect the 10 in series and to the motherboard or how did you do it bro if you upload a tutorial it would be good
Wouldn't you prefer to extract the radiator heat outside the box? I mean, I understand you want the heat go out through te top of the box, but seing this... your 3-fans radiator seems to be injecting hot air inside the box and it would be better to set them to the oposite position. (Just imo) I would just change the 3 fans in the top to insert fresh air, and change also the 3 (6 in your case) fans of the radiator to extract the radiator heat outside the box. Maybe I'm mistaken cause I don't know about the real flow of your fans, but maybe it worth a try. Regards, and great work BTW!! Mola mucho, en serio ;-) (Ya me dirás qué tal te va si haces el cambio y monitorizas las temperaturas)
Just telling becaus I had my radiator inserting air like yours, and the top fans extracting it, and the box was up to 15º hotter in the outside than doing exactly the opposite. In addition to that, I don't have the extra 3 fans you have for the radiator. If you can afford it in terms of noise it's ok, but you could save them if you want (in terms of heat) if you only use the 3 radiators fans inside, extracting air to the outside. Bests!
Hey, how did you get the front leads from the 011 dynamic XL connected with your software? I tried by mine but it doesn't work. Maybe it's cause the mystic light software?
Your fans aren't all orientated the correct way... for example the fan at the top nearest the front is 90 degrees out.. this won't matter from a cooling perspective but will have an effect on some of the more complicated RGB sequences.. where it will be out of sync - the labels on all the fans should be facing the same direction..
@@VHL2020 not sure if you found answer yet but an ARGB Hub to connect multiple ARGBs that connects to your ARGB pins on your motherboard will work. Make sure it’s 3 pin to 3pin and not 4pin to 3pin vice versa. Aura Sync, RGB fusion and many other RGB softwares for correlating motherboards should be easy to find on their respective websites. I’ve got 9 ARGB 120 Halo fans installed using the cooler master FAN PWM/ARGB hub and my Lian Li XL dynamic case ARGB connected to it as well. I use Aura Sync to control all lights.
@@pickleburrito5918 if those fans are 3pin argb and 4pin power just get ARGB/PWM Hubs way easier and less hassle instead of using Daisy Chain splitters. If you go the daisy chain route you’ll still need an ARGB hub to connect the fancy colors unless there’s ARGB splitters I haven’t looked into it.
@@MrBigoldpubes is it better to connect them to a motherboard, asus rog strix b550-e? I'm looking to get 10 fans. would that be possible? and is it better?
Bro those fans are cheap like for 20 dollars but the case is expensive 200 dollars I suggest u to go to deepcool macube 310p its white, cheap and good I do have that in my secondary pc and in my primary one i have corsair's crystal 680x
Having your radiator fans as intake is wrong imo. Also having more intake than exhaust means you have positive pressure in the case which can result in dead spots where the circulation is poor. If you swap your rad fans to extract you'll create a negative pressure environment in the case which is much better for optimal airflow. Also you wont be pulling hot air into the case anymore
@@risman_naidih Yes but too many fans are in pull. There are 6 intake fans and only 4 exhaust. This means more air is being pulled into the case than is being pushed out. Having more exhaust fans than intake creates a negative pressure environment which leads to improved airflow inside the case.
@@deank179 I have the normal o11 and not the XL. Smart idea putting the radiator on the outside like that, I was about to put it at the top but I think this looks better, I am also think of pushing from inside the case to another set of fan pulling on the outside where the radiator is. The only problem for me is that I will only have 3 set of fan pulling in cold air from the bottom. These 3 fans will need to serve the GPU, Radiators and the VRM.
Can we set different colour on fan led and different on ring led? Do we able to see led hot spot? I hate them Which one should I buy? These mf120 halo or deepcool cf120 plus?
Yo thank you so much. I bought a bunch of those fans for a Lian li case, but they were all facing the wrong way. Never thought to flip them around like that. Looks really clean
Hello, is it possible to have a sketch of the connections you have made? From fan to controller and from controller to motherboard plz ?
I was searching Google for mf120 halo with lian li xl. Beautiful build man. Have same but black. Will see if it looks as good as yours
Can you please do a review on CoolerMaster ARGB Controller vs CoolerMaster ARGB Controller A1 and let me know if both will worth other branded AIOs and fans and allow Individual LED control and Brightness control
Note: Found that the old CoolerMaster ARGB Controller allows other branded AIO and fans to control lighting but no idea about individual LED and brightness
Found the new CoolerMaster ARGB Controller A1 allows control of individual devices even if they are daisy chained but not sure if it will work with other brands
Hello, what program do you use to change the colors? I use armory create and it doesn't look like yours.
Looks very beautiful! great work!
How did you connect all the fans
You find any answer?
2 controllers i guess
@@efrdx2239 no u can use a 3 pin argb extender it will mulitply
the no of fans u can connect and then u can directly connect them to mobo's female argb header
Hi, Nice! any idea if there is any option to keep RGB only on a ring and disable the inner light? Thanks!
Did you find any answers?
does anyone here tried to use cooler master a1 gen 2 controller for 10pcs mf120 halo
Hi how does the wiring work for all these cooler master fans?
I need help I have 9 of those fans the thing that causes me problems with the argb how did you connect them? Did you use the controller that comes in the box or do you connect the 10 in series and to the motherboard or how did you do it bro if you upload a tutorial it would be good
Wouldn't you prefer to extract the radiator heat outside the box?
I mean, I understand you want the heat go out through te top of the box, but seing this... your 3-fans radiator seems to be injecting hot air inside the box and it would be better to set them to the oposite position. (Just imo)
I would just change the 3 fans in the top to insert fresh air, and change also the 3 (6 in your case) fans of the radiator to extract the radiator heat outside the box.
Maybe I'm mistaken cause I don't know about the real flow of your fans, but maybe it worth a try.
Regards, and great work BTW!! Mola mucho, en serio ;-)
(Ya me dirás qué tal te va si haces el cambio y monitorizas las temperaturas)
Just telling becaus I had my radiator inserting air like yours, and the top fans extracting it, and the box was up to 15º hotter in the outside than doing exactly the opposite.
In addition to that, I don't have the extra 3 fans you have for the radiator. If you can afford it in terms of noise it's ok, but you could save them if you want (in terms of heat) if you only use the 3 radiators fans inside, extracting air to the outside.
Bests!
Nah, fuck negative pressure.
That only works well if you got push and pull.
BEAUTIFULLL!!!
do you have any issues with coolermaster controller
did you use a remote for all your mf120 fans?
Did u replace the fan on aio? Hope you can answer thanks!
Please make a video on how to control the fans through aura sync
your motherboard must have 3 pin argb, and then you are good because normally argb fan has male and female 3 pin argb just connect each other
and you must have rog motherboard that support 3 pin argb, for example ROG STRIX X570-E GAMING
@@miseba I have the tuf gaming x570-plus wifi will that work or no?
@@ytbryant ya
What is the référence of the gpu bracket please ?
Lots out there, Lian Li do their own. If you have a big 3 slot card like RTX 3090, you need the Cooler Master V2.
can this fan fit any medium tower case such as lianli lancool ii?
What is the size of your table???
Hey, how did you get the front leads from the 011 dynamic XL connected with your software? I tried by mine but it doesn't work. Maybe it's cause the mystic light software?
OMG Its soo awesome 😍😍😍
Your fans aren't all orientated the correct way... for example the fan at the top nearest the front is 90 degrees out.. this won't matter from a cooling perspective but will have an effect on some of the more complicated RGB sequences.. where it will be out of sync - the labels on all the fans should be facing the same direction..
hello what controller are you using?
Do you need an rgb hub to control the lighting or can you control it from your motherboard or a software program? i have a gigabyte aorus motherboad.
Did u find out by any chance?
@@VHL2020 not sure if you found answer yet but an ARGB Hub to connect multiple ARGBs that connects to your ARGB pins on your motherboard will work. Make sure it’s 3 pin to 3pin and not 4pin to 3pin vice versa.
Aura Sync, RGB fusion and many other RGB softwares for correlating motherboards should be easy to find on their respective websites.
I’ve got 9 ARGB 120 Halo fans installed using the cooler master FAN PWM/ARGB hub and my Lian Li XL dynamic case ARGB connected to it as well. I use Aura Sync to control all lights.
@@MrBigoldpubes hey man how do I daisy chain a coolermaster ml360 illusion with 7 fans, is it possible for these fans?
@@pickleburrito5918 if those fans are 3pin argb and 4pin power just get ARGB/PWM Hubs way easier and less hassle instead of using Daisy Chain splitters.
If you go the daisy chain route you’ll still need an ARGB hub to connect the fancy colors unless there’s ARGB splitters I haven’t looked into it.
@@MrBigoldpubes is it better to connect them to a motherboard, asus rog strix b550-e? I'm looking to get 10 fans. would that be possible? and is it better?
How much all together?
Would want to build something like this but Black.
Bro those fans are cheap like for 20 dollars but the case is expensive 200 dollars
I suggest u to go to deepcool macube 310p its white, cheap and good
I do have that in my secondary pc and in my primary one i have corsair's crystal 680x
how loud are the fans
urrrrrrr
@@Markos4344 🤣
Is this fan MF120 Halo not too weak for the radiator?
How did you connect 10 fans plz ?
hub 10 fans pwm
@@HectorLabra you have daisy chained 10 fans on 1 argb header ?
@@dazdaz3927 argb hub
How did you connect all the Fans?
hub 10 fans pwm
@@HectorLabra thx
@@HectorLabra what Pwm did you use ?
When a 3rd of you build´s cost go into your fans xD
But gotta say, awesome colorsheme!
Bro they are not expensive
U can get a single fan for around 15-20 dollars✌️
@@tejaskn4591 yeah but I'll go for the unifans just for the frame lighting and less candle management
@@TheTillinger123 what unifans❓️
@@tejaskn4591 lian li unifans, they link together so you don't need 6 cables and only 2
@@TheTillinger123 ya they are 3 in 1
Hello. What is the name of the white coating you use on the wall?
Thats no coating brother it called 3d acrylic wall panel
Having your radiator fans as intake is wrong imo. Also having more intake than exhaust means you have positive pressure in the case which can result in dead spots where the circulation is poor. If you swap your rad fans to extract you'll create a negative pressure environment in the case which is much better for optimal airflow. Also you wont be pulling hot air into the case anymore
It is a push pull configuration
@@risman_naidih Yes but too many fans are in pull. There are 6 intake fans and only 4 exhaust. This means more air is being pulled into the case than is being pushed out. Having more exhaust fans than intake creates a negative pressure environment which leads to improved airflow inside the case.
@@deank179 I have the normal o11 and not the XL. Smart idea putting the radiator on the outside like that, I was about to put it at the top but I think this looks better,
I am also think of pushing from inside the case to another set of fan pulling on the outside where the radiator is. The only problem for me is that I will only have 3 set of fan pulling in cold air from the bottom. These 3 fans will need to serve the GPU, Radiators and the VRM.
Ahh pana, vienes de TechnoReviews.
Sip
@@HectorLabra Justo estaba viendo ese video, tu set up está bestial, ojalá pueda llegar a tener 1/8 de eso, felicidades ;)
@@Yaton_ muchas gracias 😊
Hello man.
I have a couple of questions for you. Can we contact via discord if you have one?
Did you paint the GPU bracket?
yes
Can we set different colour on fan led and different on ring led?
Do we able to see led hot spot? I hate them
Which one should I buy? These mf120 halo or deepcool cf120 plus?
Yes u can use coolermaster's own software or use aura sync to control them and they are argb so u can customize them easily
coe irmaozinho, da aquela moral pra tu, a placa chegou muito fraca, pega uma galaxy ou uma gamerock.
fica com deus!
Are these Fans addressable?
Should be
@@1Guason3 yes absolutely
best chilean build
That's 10 fans
2 behind the radiator
Waw. I want this builddd
unicorn vomit all over the place