Bro this saved me so much time, do ypu know that the hardest part of building my first pc is the freaking case fan but this explained it well and I can continue on with my build. Who the heck is snoring in the back ground in the first 5 mins?
Thanks for this vid man. This was a huge help! Also, I read in the comments that it was your dog snoring in the background... My pooch likes to snore as well. She will jump up on the bed when i'm sleeping and snore IN MY EAR! haha Subbed 👍👍
Does the rgb show through to the back fairly well. These fans will be used as air intakes on the bottom of the case so the back of the fans will be very visible.
i did wonder me why they are light up in the same color even when i daisy chain them. controlled them over aura sync. the ram is floating the last color you seen on the another ram in rainbow mode. but the fans dont. like copy paste. all fans do the same. not like the lian li or corsair fans as example. by the way the sticker is a hologram logo sticker 😄
Hi yes that’s possible. There is a maximum amount of RGB lights it can feed so it depends on what you are connecting, like a RGB strip can have many lights, specially the longer it gets. For fans 6 should not be a problem for sure but up to 9 will work to depending on the fans even over 10 will work. 🙂
Hello, I need 6 fans for my pc case, 3 x in the front position and 3 x in the upper position, if I understood you correctly, it is enough if I buy two packages with three pieces of fans, connect all six fans with each other with a cable and plug them into only one control box, from the control box I will then lead one cable to the motherboard and one cable to sata for power? thank you
The cable that has both a sata end and a 3 pin male and connects to the controller, where does the other 3 pin male cable go? It's the one on the black cable
I'm trying to find out if they can chain in sequence somehow so the effects travel down the fans, from one to the other. I have 6 of the argb Sickleflows. They have 6 lights each but don't work as a chain of 36 lights when pigtailed together. I've seen it work on the "stack" effect where the light travels from the first fan to the last and stacks the last fan, then the next... What I get is all 6 fans stacking at the same time.------------------------------and Happy New Year!
@@KompleteTutorials You'll at least get a sub for answering. It's not terribly important I guess, this is my first lit up computer. it's just one of those things that bug ya and you have to figure out. I saw a video specifically on Polychrome that did it. Stack worked across all his fans stacking one at a time. Asked there and never got response. Been hunting around forever, even put in a question at Cooler Master. You can set the number of lights in Polychrome. ASRock board B550M/ac. If I set it for more than 6 lights (6 fans)...36...they all just spin a light 30 times before they all stack in unison. Doesn't travel stacking one fan at a time. I don't have any strips to see if it recognizes an increase in lights with two strips hooked in line. Verrry happy with the cooling of the Sickleflows so if they (or my mobo?) don't work like that it's fine. (Pre LHR) PNY Revel 3080 - 3700X - 32GB 3600 cl16. I get high 60's under load on silent mode...240 aio on the 3700X and 8 sickleflows total...two are just rgb and came with the CM240L.
I have a coolermsster argb 200mm come exactly the same as those, it was come with the case, the argb 200r, they have male and 1 female, I can just chain all of them with this method?, I need 3 more coolermsster fans and looks like all of them are exactly the same, 1 male and 1 female, is for the chain, isn't?, They are all 3 pin 5v so there shouldn't be a problem?.
@@thithiradilmithbandara5432 so you can type, but not read? Lazy fuck...... To all you of you who are doing this: (Asking questions while all info is RIGHT THERE in front of you (!!) You guys are the most annoying people on the internet, period.
i have bought 3in1 mf120 halo argb but i have a problem...i have connected the fan together whit the argb connection and the 1 connection argb to the controller and the controller at the usb of the motherboard and everithing gonna be ok but when i shutdown the pc all the fan of my pc ( also the processor fan) remain on at minimun velocity whit the light on....why? sry for english ahahah
No problem, my English is not good also, yours is fine :-) Most motherboards keep getting power untill you turn the power OFF on the powersupply itself. On the back should be a power ON and OFF at the powersupply, best to turn that OFF always. When you do that all lights (and connected USB devices) should go out.
You saved me and practically everyone’s time with this tutorial, you did what other pc TH-camrs couldn’t, real goat 😤💪🏼
Thanks!
Bro this saved me so much time, do ypu know that the hardest part of building my first pc is the freaking case fan but this explained it well and I can continue on with my build. Who the heck is snoring in the back ground in the first 5 mins?
Happy i could help you ! My dog always snoring 😂
i love the dog snoring in the backround, sounds exactly like my dog lmao
2:23 oooh so they connect with each other, nice, thank you
Who TF is snoring in the background? Lol
My wife 😭 JK my dog 😂
IS THERE SOMEONE SLEEPING IN THE BACKGROUND??? LMFAO
😆
someone taking a deep nap!
Thanks for this vid man. This was a huge help!
Also, I read in the comments that it was your dog snoring in the background... My pooch likes to snore as well. She will jump up on the bed when i'm sleeping and snore IN MY EAR! haha
Subbed 👍👍
Does the rgb show through to the back fairly well. These fans will be used as air intakes on the bottom of the case so the back of the fans will be very visible.
yes they do pretty good actually. Sorry for the late answer
@@KompleteTutorials Thanks for the reply
@@kennethstandley5514 Happy to help :-)
THANK You so much my son really needed this tutorial
Thank you!
i did wonder me why they are light up in the same color even when i daisy chain them. controlled them over aura sync. the ram is floating the last color you seen on the another ram in rainbow mode. but the fans dont. like copy paste. all fans do the same. not like the lian li or corsair fans as example.
by the way the sticker is a hologram logo sticker 😄
Hello! It is possible to connect both sickleflow and halo fans on the same daisychain? is there a limit for energy supply on the daisychain? Thanks!
Hi yes that’s possible. There is a maximum amount of RGB lights it can feed so it depends on what you are connecting, like a RGB strip can have many lights, specially the longer it gets. For fans 6 should not be a problem for sure but up to 9 will work to depending on the fans even over 10 will work. 🙂
How to connect 4 cooler master mf120 s2's together? 3 at the front are synced together the back one isn't synced
If you do it like in the video it should work. You probably did not connect a wire the right way, check them.
Hello, I need 6 fans for my pc case, 3 x in the front position and 3 x in the upper position, if I understood you correctly, it is enough if I buy two packages with three pieces of fans, connect all six fans with each other with a cable and plug them into only one control box, from the control box I will then lead one cable to the motherboard and one cable to sata for power? thank you
When I daisy chain the rgb fans only one lights up am I doing something wrong? Please help.
Sorry for the late answer i was sick. I think you suède the wrong connector. Does it werk already now?
The cable that has both a sata end and a 3 pin male and connects to the controller, where does the other 3 pin male cable go? It's the one on the black cable
You can connect another fan on it
I'm trying to find out if they can chain in sequence somehow so the effects travel down the fans, from one to the other.
I have 6 of the argb Sickleflows. They have 6 lights each but don't work as a chain of 36 lights when pigtailed together.
I've seen it work on the "stack" effect where the light travels from the first fan to the last and stacks the last fan, then the next...
What I get is all 6 fans stacking at the same time.------------------------------and Happy New Year!
Hi you need a setting in software to achieve that. Thanks, Happy New Year !
@@KompleteTutorials You'll at least get a sub for answering.
It's not terribly important I guess, this is my first lit up computer. it's just one of those things that bug ya and you have to figure out.
I saw a video specifically on Polychrome that did it. Stack worked across all his fans stacking one at a time. Asked there and never got response.
Been hunting around forever, even put in a question at Cooler Master.
You can set the number of lights in Polychrome. ASRock board B550M/ac.
If I set it for more than 6 lights (6 fans)...36...they all just spin a light 30 times before they all stack in unison. Doesn't travel stacking one fan at a time.
I don't have any strips to see if it recognizes an increase in lights with two strips hooked in line.
Verrry happy with the cooling of the Sickleflows so if they (or my mobo?) don't work like that it's fine.
(Pre LHR) PNY Revel 3080 - 3700X - 32GB 3600 cl16. I get high 60's under load on silent mode...240 aio on the 3700X and 8 sickleflows total...two are just rgb and came with the CM240L.
I have a coolermsster argb 200mm come exactly the same as those, it was come with the case, the argb 200r, they have male and 1 female, I can just chain all of them with this method?, I need 3 more coolermsster fans and looks like all of them are exactly the same, 1 male and 1 female, is for the chain, isn't?, They are all 3 pin 5v so there shouldn't be a problem?.
Yes you can do that no problem I have 6 myself chained that way. Sorry for the late answer.
Fan name please
@@thithiradilmithbandara5432 so you can type, but not read? Lazy fuck...... To all you of you who are doing this: (Asking questions while all info is RIGHT THERE in front of you (!!) You guys are the most annoying people on the internet, period.
You saved my life bro
how would i do this if i only use 2 of the sickle master fans
Same. Just use the connectors i show and hoe i connect them :-)
Super video
Thanks!
i have bought 3in1 mf120 halo argb but i have a problem...i have connected the fan together whit the argb connection and the 1 connection argb to the controller and the controller at the usb of the motherboard and everithing gonna be ok but when i shutdown the pc all the fan of my pc ( also the processor fan) remain on at minimun velocity whit the light on....why? sry for english ahahah
No problem, my English is not good also, yours is fine :-) Most motherboards keep getting power untill you turn the power OFF on the powersupply itself. On the back should be a power ON and OFF at the powersupply, best to turn that OFF always. When you do that all lights (and connected USB devices) should go out.
Michael van Gerwen! Emblum
When I daisy chain the rgb fans only one lights up am I doing something wrong? Please help.
used wrong connector perhaps?