ZETOR BRAKES REPAIR! Cylinders Replaced 🔧⚙️
ฝัง
- เผยแพร่เมื่อ 16 มิ.ย. 2021
- With absolutely no brakes on the tractor its time to have the rear brake cylinders replaced. Was a bit nervous tackling this job along with the help of my Nephew Jony we managed to get both sides done without to much trouble. New front end panels and bonnet have arrived and all fit perfect. #zetor #restoration #farmlife #oldtractor restoration videos #howto
• Super Major Barn Find ... our Super Major barn find.
Please Subscribe to the Channel.
If you like the video or find it interesting then give the video a thumbs up and leave us a comment and we will get back to you. Again thanks for watching. - ยานยนต์และพาหนะ
![แขกคนแรกร้านแจ๊ส [ซี - เอมมี่] | iJazzKhunJang](http://i.ytimg.com/vi/XP6C9kulFfc/mqdefault.jpg)
Thanks for watching the video if you find it helpful please hit the subscribe button and like the video, thanks to all the recent subscribers and hope you all have a Merry Christmas 🎅🌲
Oops oooooololululuoooioouooioooooououooluluuoulollolooooouooouolololluoluuuloiooooouuooollolloiollouoluoolluuuluooluluoioooooolluouooooliiulluoluuooooouoiooolullloloiuuouooooooooloooolooouuloooolluouloooookuuu
Nice to see you didn’t edit out the mistakes.
Great content Johnny was great as well.
Jony is a great help, knows his stuff for such a young lad.
Tidy bit of rigging Davy 🤙😂
Cheers Matty pal, I’d have been beat without the engine hoist, need pull one side apart again in order to fit new brake shoes, really should have had a set for doing the job.👍🏻
Good job there though pal 🤙
@@daleharrison7679 , brakes are only for parking anyway 🤙
👍
Thanks for watching 👍🏻
Nice video! Got a 4718 in poor condition. Can u guys make a video showing oil change on diesel pump and regulator? Can’t find any good description on that on net👍
Hi Sven, I will be doing this to our 3511 soon, it was running very poorly on idle and after topping up the oil in the governor unit it sorted itself out. Il try get a video done next week on that 👍🏻
@@RedShedProjectsScotland thank you👍
Did you loosen the Handbrake bands before taken off the Portal Axle? If not maybe its the Reason it doesn't really wanna come of at 10:20.On the Drum is a lip and normally the band does(should) not slip over it because its tight fit.
Hi Frank, We did end up loosening it up some more, it was all trial and error I’d never attempted this kinda job in the past. Fairly familiar with the workings of it now though.
Great video, great help,can you get better quality parts for zetors like slave cylinders & o ring seals.
Have you tried Roy Perfect for Zetor parts? I order my items from ATP motorz in Czech Republic and have them sent to me at reasonable price, many Thanks for watching 👌🏻.
Did you replace the oil seal in the housing where the shaft goes back in on instalation? Only there was a fair bit of oil on the drum.
Yes Phil it has since been replaced, unfortunately it had to be taken apart again to fit the new seals, it was mostly brake fluid that had leak onto the installation.
We have to replace that same side on our 5211, was it the left or right
We actually done both sides, still need to replace the shoes on the left side, thanks for watching.
How much fun was that. About how long was the job?
Oh it was big laughs, took us half a day to do both sides, thanks for watching.
Does your brakes gets warmed up after ride your tractor.
Brakes are fairly good since we done this job I have not really worked them that hard to overheat.
Did you change the diff cover seal , if you did was there a spring inside it
Thanks
We only changed the seals were the splined shaft goes in, this job was the first I’ve ever worked on a tractor. Are you doing something similar?
@@RedShedProjectsScotland
I am aye,
Have brakes and clutch done ,. Getting crankshaft done at the moment
Have new panels for it ,
Was one of the zetor s of the farm, was bought second hand 1988,
A slow moving project ,
How many litres of paint did it take to spray yours ,
@@thomasmclaughlin2206I didn’t get the chance to enhance mine much further as we bought site to build a new house and it’s been working all summer. Hopefully after the house is finished il get a decent shed put up and il finish it probably. I bought 5 litres of Red and 2 litres of beige colour and had loads left over.
@@RedShedProjectsScotland
Ok that not to much paint , any left over will do the 6718,
I seen in a video you were thinking of putting on zetor cab , you would need a 6911 cab to fit that tractor because of the diesel tank ,
And you would need new clutch and brake pedals ,
@@thomasmclaughlin2206 I ment to refit the Duncan cab it came with its in quite tidy condition, although I like being able to just hop on and off without the cab. Probably only really use it in the better weather it’s currently under cover for winter, if I get time tomorrow I may do an update on what I’ve been up to with the new place.
Where are you located? Mobile tractor repair is great!
We are based in Aberdeenshire Scotland 🏴