Make sure you watch Learn ADS in 5mins and RF Design Tutorial playlist on the channel. Those have updated product learning videos as well as real-world design videos...👍
Hi Ehab, If your exported file is good then you should see exactly the same performance in ADS as long as you keep the same start, stop and step frequency. Also, make sure you exported S2P file with 50Ohm reference impedance from CST.
@@BhargavaAnurag Many thanks for your cooperation I have Avery strange behaviour that S12 and S21 are appeared like CST results meanwhile , S11 and S22 has the same cst results but with positive values in dB . As example S11 in cst at resonance freq. is -10dB When import to ADS , the S11 at red once freq become 10dB
Thanks for your explanation, i have a question plz, i am working with the touchstone combiner but when i try to import s2p files to get an s4p file i have the following warning "the following file can not be add this tool support only version 1", any help with that ?
Hi Shubhankar, So, you would like to simulate multi-dimensional S2P file that is dependent on bias voltage? That should be easily possible by using a DAC (Data Access Component) in ADS. If you have any sample file then share it with me and I will try to create a tutorial on the same.
Sir, I couldn't find the "generate s2p" in datasets.....I have only snp in my data sets. How can update data set list. I want to export s2p file from ADS . Thank you.
Hi Ravi, If you want to export S2P file then you can place SPOutput block from Simulation-SParameter library palette on your schematic and define the output file name. This way the file will be generated automatically when you run S-Parameter simulation. Alternatively, you can use Tools->Data File Tool in data display page to export the touchstone file from the available dataset. You can refer to this video for help: th-cam.com/video/S-fB8nPDYcg/w-d-xo.html
As long as you mention proper header in the beginning and have data in correct order it will become touchstone file. Read documentation about the touchstone file format and you will understand it completely
This video solved my long-lasting confusion! Thank you so much!
Thank you! Starting from the ground up. Your videos really help.
Make sure you watch Learn ADS in 5mins and RF Design Tutorial playlist on the channel. Those have updated product learning videos as well as real-world design videos...👍
dears, i tried to export S2P file for dual port patch antenna from CST and imported to ADS but i can't get the same plot for S11 ,S21,S12,S22 on ADS
Hi Ehab,
If your exported file is good then you should see exactly the same performance in ADS as long as you keep the same start, stop and step frequency. Also, make sure you exported S2P file with 50Ohm reference impedance from CST.
Kindly visit my channel and look at "Learn ADS in 5mins" playlist as that has newer and updated videos for newer ADS versions.
@@BhargavaAnurag
Many thanks for your cooperation
I have Avery strange behaviour that S12 and S21 are appeared like CST results meanwhile , S11 and S22 has the same cst results but with positive values in dB .
As example S11 in cst at resonance freq. is -10dB
When import to ADS , the S11 at red once freq become 10dB
@@ehabhegazy8179 there is something wrong with your setup
Thanks for your explanation, i have a question plz, i am working with the touchstone combiner but when i try to import s2p files to get an s4p file i have the following warning "the following file can not be add this tool support only version 1", any help with that ?
If you have touchstone ver2 files then it won't work probably but whatever is the case, kindly contact your local Keysight support team for help.
Sir how to include multi-bias S-parameter file (s2p) for circuit simulation. I will be waiting for your reply.
Hi Shubhankar,
So, you would like to simulate multi-dimensional S2P file that is dependent on bias voltage? That should be easily possible by using a DAC (Data Access Component) in ADS. If you have any sample file then share it with me and I will try to create a tutorial on the same.
Very Useful. Thanks
How to export time domain measurements file (.csv) into ADS?
Sir, I couldn't find the "generate s2p" in datasets.....I have only snp in my data sets. How can update data set list. I want to export s2p file from ADS . Thank you.
Hi Ravi,
If you want to export S2P file then you can place SPOutput block from Simulation-SParameter library palette on your schematic and define the output file name. This way the file will be generated automatically when you run S-Parameter simulation.
Alternatively, you can use Tools->Data File Tool in data display page to export the touchstone file from the available dataset. You can refer to this video for help: th-cam.com/video/S-fB8nPDYcg/w-d-xo.html
Sir can please tell how to simluate S1P file in ADS awaiting for your valuable replay.
Hi,
You can use S1P component from Data Items library palette and then simply setup a S-Parameter simulation like you normally do.
@@BhargavaAnurag Thank you sir.
How do I convert a txt file into a touchstone file?
As long as you mention proper header in the beginning and have data in correct order it will become touchstone file. Read documentation about the touchstone file format and you will understand it completely
Thank you so much !
Thanks so much! This was very useful!
very helpful
Good to know. Kindly look at newer design and ADS learning videos on my TH-cam channel. This one is quite old....👍
thanks so much xD
Thank you for the video. I would like to know how to write group delay data file.
thanks
thank sir
Welcome.. Make sure you watch newer videos on th-cam.com/users/BhargavaAnurag