IMPORTANT: I apologize for not knowing comments were disabled You can now comment any questions or comments you may have related to the topic of this video
@@jacksonrigney8420 I hate to break it to you but you dont have the right cards... I understand how frustrating it can be because it took me 3 tries to buy the right cards. they have to be specifically the type of card i described in the video and in the description. I have a link to the right cards in the description you can use. They are the same ones i used in the video
@@jacksonrigney8420 I had only gotten that message once but it was because when I tried to write I said not writable instead of Chinese magic unlocked gen 1
Why the hell am i looking to tutorials from all the big TH-camrs that don't even work. Thank you so mutch i was so worried that it wouldn't work you're my hero
Finally! Someone did some work and put together an actual informative video instead of racing to be the first person on youtube to rip off someone else's work from a forum post! Got it mostly working, still having issues with writing item cards.
Thank you very much for the set of dumps. I expanded the collection as much as I could and as far as the equipment allows.True, I dug a little into them and made sets of keys and reset the dumps with progress.Thanks again and good luck.
Unfortunately it seems not everyone can escape the errors, seems like a lot of people were having more complex problems then i had but im glad it worked for you :)
Thanks , I can write Imaginators now :P It's the same process just need to do it 2,3 times until you get the dump name on both of the files , min 09:00 . If it does not work first time, try again from the first step. Read the card, then write the card. It's because it gives a read error and you need to do it again. Some cards I made it to work from the first try, some needed 2,3 tries. I had one for Pain- Yatta that I had to do it 8 times until it worked. I closed the app a few times and deleted all the dump files from the Temp folder of the app and it worked finally. ;)
do you have discord? no matter how many times i repeat the process or reinstall software i cant get it on the 2nd dump file. i have no clue what im doing wrong
I have no idea what happened but I can't get the cards to work. The four cards that came with the reader worked flawlessly. I ordered cards people say have works, from the same company as the cardreader, and I've gotten nothing. I don't know what else to try.
Thank you for the tutorial, just got my reader for Christmas and sad to say i keep getting an error when reading rhe card that says Mifare Classic is only Supported, do you know how to fix this error?
@@Tanyatss. I can’t quite remember since it was so long ago but I think it was when I was using the wrong cards. Had to send them back and buy the right ones
@@jobmarsman1718 Working 100 % now. It may be easier if you put your downloaded DUMPS in the dump directory of the prgram. Also when writing, make sure you select the same file twice, i found selecting the dump once only had it in the one section and it needs to appear top and bottom.
@@dark_ghost7327i used an entire pack of the same cards and only one works out of them all and the rest are saying only classic is supported so i don’t know if that’s the issue because one works
Did you do everything the exact same like I did in the video? You might also have to turn of your antivirus. Not sure why but its worth a shot imo. If you did both of those things i can try to upload a copy of the one i already have extracted for you to try
MSI Installer for PC/SC Driver doesn't install for me I keep getting an error saying (missing the package file for installation) any assistance would be greatly appreciated
hi, i managed to successfully write to cards. well, the short thing is that you will have to write twice in a single run the bin files so you won't have to rewrite it.
It works, after doing it I just stop the program from the task manager and it lets me do it with no problem on the next card, sadly now I my reader wont read my cards, it will constantly put an INPUT/Output error and finish with Symbols no key found... Ill have to buy new cards to try to get other skylanders since It ended up bricking one of my skylander cards
while i am using mifare my nfc card readers ligth turns off right after i press "start decode & read tag and it wasnt happening with diffrent applications. Can i know why is this happening?
I genuinely don't understand what I'm doing wrong and information is so scarce on this. I did EVERYTHING right up to 11:38 but Im getting a "63 blocks out of 64" message and its hurting my brain so bad. Ive been using LEXI cards and they work great, no problems, super easy to mess with. Then I get a 30 pack of 1k nfc cards that look and supposedly function the same but they just dont.
I can’t get the file dump down into the blank tag. Any other ideas? I have everything downloaded, light on the reader is finicky (some no light, red, or green), read tag went good, and using tags that came with it.
If you haven't already try to follow the steps other youtubers did because i made this video after following every guide and video i could and none of them worked for me so if you are still having trouble I'm sorry but i have no clue what to do. I say just play around with it until you notice something good and work off that. try to understand how the program is working for you and build off that and eventually you will get it. it took me days to figure out how it worked for me but maybe for some reason it works a little differently for others
Thank you. I even uninstalled everything and started over. Which I might do again when I get the cards in the mail. Right now I am guessing that it might be 1) the included 2 cards that came with the device is the inaccurate cards needed to file dumb the skylander and/or 2) the device is not working properly as I’m not sure about the light indicator.
Maybe a third option that could have caused an issue is the program that I had to download to be able to open the driver for the ACR. I don’t know if that matters or not.
can you make a vid without using mwt but still on pc cuz i bought mifare ultralight cards instead of the classic ones and mwt only supports the classic cards
I dont think skylanders work with ultralight, correct me if im wrong though, and to make a vid on it if it did work id need to buy them which im not in the position to do right now
I am having a problem installing the MSI Installer. When I try to open the file after I completed the downloading, the computer gives me options on which app I should use to open the file instead of being a normal folder. The only app I have that works for the file is Word, and it only gives me pages of codes. Which app do I need in order to properly install the MSI Installer?
I have Gen2 NFC cards, so when i use magic card gen2 it works perfectly, but when i try to wipe the nfc card (change uid to 00000000) it just doesn't work, and it just says: no keys found. and i've followed your guide many times. And sometimes, it does (almost) work, but i get the error: nfc_initiator_init: Input / Output Error. and when i click on read again, it just does nothing. very weird.
@@davidhorvath2678 i fixed it. it turned out the cards didn't work after all and i bought new ones (again) after that it worked perfectly fine. just make sure that when you write the card, you click gen2 and not gen1. i can send you the link for the cards if you want. but i live in the Netherlands, so im not sure if you can get them (its on aliexpress).
I have seen your video on how to create NFC cards and in the program I get the following error: "only mifare Classic is avalible" how do I solve it? P.D. very good video
it says 63 out of 64 blocks, usually this means its the wrong type of card problem is i have tried all manafacturers available to me and somehow still get the same error is there some way to fix this?
Have you had any luck doing this with the Imaginators characters? I can successfully make cards for Giants, Superchargers etc but all the Imaginators ones I've tried either don't work at all or the game thinks the characters are corrupted (but can't repair them). I am using the dumps in your links above.
I dont have the Imaginators games, so im not sure if they work. I can try to get an emulated version of the game and see if it works on there, but i cant do that this week. If the files i have dont work after doing some testing, ill have to look for new dump files. Ive had an issue with that emulating the game in the past and just downloaded a different set of .sky files to use on an emulated portal within dolphin emu but ill have to look for dumps now. If i end up having to find the .sky files again and convert them to dumps (if that even works) Ill make a separate video on that.
@@MalevolentAB No problem (and don't worry if it is too much trouble). I'll keep searching around and see if others have been able to do Imaginators. I'm confident my process is ok given I've got them working for the other games.
@@sarahsmart5024 I'm not sure what set up you are using but I was using the Android App (MiFARE Classic Tool) and that was the issue. It says it writes the UID but it doesn't appear to even though the box is ticked, the problem with the Imaginators figures is they have a higher level of security/encryption than the older games. Unless you can do a 1:1 clone of absolutely everything from the figure it won't work. So for anyone else who reads this in the future, in the end I got a USB ACR122U Tag writing device, used the Windows version of the tag writing tool (MiFARE Windows Tool) and the Imaginators character dumps are cloning perfectly now.
So I followed the guide to create skylanders cards, but for some reason for me it only shows 63 blocks instead of 64. How do you get miFare to write all 64 blocks? I'm confused
I found some cards with 13,56 mHz, rewriteble UID and 1K, do they work? Do the (Yosoo NFC ACR122U RFID Contactless Smart Reader & Writer + SDK + 5X IC Card) work as a reader?
not sure, all i know is the stuff i used because it worked for me so i cant really say, but if the specs of what u have match what i have described in the description and video then it should
I really need your help. This tutorial has really helped me to get much further than before, but everytime I write the card it only writes 63 of 64 blocks and I don't know what to do. Any idea?
Most likely if its not a software issue its the cards. I liked the cards i use in the description. If that doesnt work then it must be a software issue
@@MalevolentAB I've seen you talk about the possibility that it isn't a zero-sector card. Could that be the case? Im trying to send the cards back currently, but maybe I'll try to do it on a different computer before. Thanks
@@Johnny_L1 Can you reply to this message with the timestamp so i can hear what u are hearing? Its been a while since i watched my own video lol. The cards have to be a certain type so you can access the 0 block
@@MalevolentAB You didn’t talk about the sector 0 in the video, you spoke about it in this comment section. It’s fine though, I think I really bought the wrong cards. I’ll try again on a different computer, but if it doesn’t work there, I’ll buy new cards
I got a card working, but when i put on a fresh new card on without anything, it keeps the data and says its been read and writable, and when i write it it says aborting when i didn't click anything.
Is there anywhere to find the dump file for the Cursed Tiki Temple Blue Chest? I have only been able to locate the Lost Imaginite Mines Chest dump file.
Thankyou so much for the video brother! Absolutely awesome content!!🔥 I still get the error message saying the driver is not installed lol... I'm waiting on my physical reader in the mail still, could this be the issue?
I dont think so, id say wait till you have the card reader and try the process again. If that doesnt work im not too sure what the issue could be. Maybe downloading a more up to date version? i have no idea. It was hard for me to get the message to go away
Did you ever get your reader? I have mine coming in a few days and this is the problem I'm currently having. Hoping the programs aren't currently bugged.....
Hello! It doesn't work for me because when i search for the skylander dumps i downloaded, after clicking "write tag", i just can't find them. They aren't there for me and i don't know what to do. Please help me. just found out that i don't have the right cards
Can anyone please give me directions on how to delete the libusbk driver, I accidentally installed it multiple times and I can't figure out how to delete because the help page on github is deleted for some reason and literally no corner of the internet will give me a concise answer.
I followed your steps but something goes wrong... when I try to set the UID to 0000000... MWT just closes itself, I don't have anything else open and I do not know what could be the reason
Hello! I'm trying to replicate your process, and it's worked for me once after much deliberation. MWT frequently selects the wrong dump input field, making me overwrite my skylander dump instead of loading it onto the card. Is there any way to circumvent this issue and decide in which field the selected dump file goes?
@@MalevolentAB Just found the google drive version and even when I download the folder from there, it still only shows up as one file everytime I download it.
i still get the errors every time i use select source dump it wont apear in the black tag dump file section idk how to fix it but still this video was great help even though mine still doenst work :(
Hi. I am doing everything presumably right and I'm still getting a this skylander has an error message. I can't afford to buy the 100 pack of cards so I'm trying to find another alternative, but still nothing has worked. Do you have a suggestion or another pack of cards I can try? Thanks.
so im getting a *ARC122U Tag reader driver doesn't seem to be installed. Click OK to be redirected to on the driver download page. Install driver last version named 'MSI Installer for PC / SC driver'* is that appearing because I messed a step up or because i dont have a NFC reader/writer plugged in? ive followed every step exactly excpet for the one involving unplugging and re-plugging in the reader/writer as ive not got one (yet)
@@Toxinspuppetmaster honestly im not sure, its been so long since ive used that software. When i make nfc skylanders again ill have to see if theres an updated way to do it because it still seems like so many people are having issues
Hello! Do you know why I am keep getting the error message when I open the app which says that "the ACR122U tag reader driver doesn't seem to be installed" (I have already installed it). And also when I close that window, the app simply says that no tag detected on reader even tough the card is on the reader. And the reader makes a beep sound when I put the card on it which I suppose means that It detects the card but the app somehow doesn't. Are these 2 problems related? How could I fix these problems?
You could just try re-plugging it in. Its happened to me before and re-plugging it in works. right click on windows icon, click device management, click on smart card readers, right click on ACR122U and click uninstall. After that you will need to re-plug it in and install the ACR112U driver again. If that doesn't work do the same thing and try to search automatically for drivers rather then uninstalling them. If your still having trouble let me know. edit: yes im pretty sure these 2 problems are related
@@MalevolentAB Thank you for the answer. I’m gonna let you know whether it works or not as soon as I can. One more question: Does having the reader plugged in or unplugged have anything to do with the error message? I mean it shouldn’t appear in either case right?
i had bought 40 nfc cards that are apparently the wrong type. i got mifare utralight instead of mifare 1k. is there a way i can use those or do i need to return them?
Hey is there a list of compatible cards anywhere? The ones linked are a bit too expensive and i found a few with to the same likeness that were half the cost
Maybe try buying smaller packs if they are too expensive. Also if the cards have the exact same properties as what i listed in the description u should be good. Last time i tried to go for cheaper cards and didnt know fully what to look in cards i ended up getting the wrong ones that dont work with skylanders
@@MalevolentAB -hello. After everything arriving i went to test it out and it the tutorial works until i place it on the portal. In Mifare it says 'finished' and it says the name in the blank tag dump file. When i place it on the portal nothing happens however- Edit: Nevermind, seems like a faulty card - worked on a different one
IMPORTANT: I apologize for not knowing comments were disabled You can now comment any questions or comments you may have related to the topic of this video
Mifare windows tool on github is taken down :(, where can i download?
@@gliusha2068 I copied the installer to my google drive so you can download it there until the github link starts working again. Hope this helps :)
@@MalevolentAB What do I do if I only get 63 blocks out of 64 blocks when I'm writing for the card?
@@jacksonrigney8420 I hate to break it to you but you dont have the right cards... I understand how frustrating it can be because it took me 3 tries to buy the right cards. they have to be specifically the type of card i described in the video and in the description. I have a link to the right cards in the description you can use. They are the same ones i used in the video
@@jacksonrigney8420 I had only gotten that message once but it was because when I tried to write I said not writable instead of Chinese magic unlocked gen 1
Why the hell am i looking to tutorials from all the big TH-camrs that don't even work. Thank you so mutch i was so worried that it wouldn't work you're my hero
glad it worked, that's why I make tutorial videos, when the big cc videos fail for me😂
@@MalevolentAB😢 it's not working 😭
@@codeexze3713You likely bought incompatible cards or a different type of reader. Or maybe you just didn't install the drivers
Finally! Someone did some work and put together an actual informative video instead of racing to be the first person on youtube to rip off someone else's work from a forum post! Got it mostly working, still having issues with writing item cards.
writing the cards is a stubborn process, persistency is key
yooooooooo you saved my LIFE dude me and my brother were losing our minds trying to figure this out
Dude, you’re a FRIGGIN’ life saver!
After a week of having to buy new cards and getting errors, IT FINALLY WORKS!
OMFG THANK YOU SOO MUCH!!!!!!! I've been working on this for like 3 hours
Thank you very much for the set of dumps. I expanded the collection as much as I could and as far as the equipment allows.True, I dug a little into them and made sets of keys and reset the dumps with progress.Thanks again and good luck.
i was so dowtfull when i read the comments but bro you are a life saver I am def dropping a like
Unfortunately it seems not everyone can escape the errors, seems like a lot of people were having more complex problems then i had but im glad it worked for you :)
Thanks , I can write Imaginators now :P It's the same process just need to do it 2,3 times until you get the dump name on both of the files , min 09:00 . If it does not work first time, try again from the first step. Read the card, then write the card. It's because it gives a read error and you need to do it again. Some cards I made it to work from the first try, some needed 2,3 tries. I had one for Pain- Yatta that I had to do it 8 times until it worked. I closed the app a few times and deleted all the dump files from the Temp folder of the app and it worked finally. ;)
do you have discord? no matter how many times i repeat the process or reinstall software i cant get it on the 2nd dump file. i have no clue what im doing wrong
same with me @@Dr_Deli
Best Guide ever!
First I had problems then I redid it again and it works. Didnt wasted 20 buks for 50 cards yeeeesss!
Thank you kind sir. I have been trying to fix this all night.
Honestly you saved my life haha thank you for your link! Mifare are removed from the web so you gdrive save me!
Any time! Im glad i was able to help you
Google translator : it works, thanks, very helpful guide
I am happy it worked for you, no problem
Thank you for this great tutorial helped a lot :)
This man is a hero
I have no idea what happened but I can't get the cards to work. The four cards that came with the reader worked flawlessly. I ordered cards people say have works, from the same company as the cardreader, and I've gotten nothing. I don't know what else to try.
thankyou buddy your awesome its working now for me
glad to hear!
How do you install the ACS driver? when I try it just downloads a text document
All working, thx for the explanation
Thank you for the tutorial, just got my reader for Christmas and sad to say i keep getting an error when reading rhe card that says Mifare Classic is only Supported, do you know how to fix this error?
hey man I have the error message that only Mifare Classic is supported but my cards are from mifare, whats the problem, can u help me?
Now I keep getting an error that’s says “only Mifare Classic is supported.” What does that mean and how do I fix it?
I get this too, did you find a fix?
@@Tanyatss. I can’t quite remember since it was so long ago but I think it was when I was using the wrong cards. Had to send them back and buy the right ones
tried all the same steps but my blank tag dump file stays whatever the card UID is
same, when I scan it in game, it does nothing
Thank You for your tutorial ! , i'll be ordering some cards and the reader etc. because after watching your Video i feel i can do this now :>
reader has arrived. following your tutorial right now
@@Polarian Has it worked?
@@Polarian I can't seem to make it work
@@jobmarsman1718 Working 100 % now. It may be easier if you put your downloaded DUMPS in the dump directory of the prgram. Also when writing, make sure you select the same file twice, i found selecting the dump once only had it in the one section and it needs to appear top and bottom.
Works 100 % , Thank You !
mine only does 63/64 blocks how do i fix this?
Do you have a solution?
Bro thanks a lot i was struggling that much, the problem were the drivers
I'm trying to read the tag but it keeps saying "ERROR: only Mifare Classic is supported", do you know what might be causing this and/or how to fix it?
did you figure it out? The same thing is happening to me
U are using the wrong cards because with this software only mifare classic 1K is supported
@@dark_ghost7327i used an entire pack of the same cards and only one works out of them all and the rest are saying only classic is supported so i don’t know if that’s the issue because one works
Did you do everything the exact same like I did in the video? You might also have to turn of your antivirus. Not sure why but its worth a shot imo. If you did both of those things i can try to upload a copy of the one i already have extracted for you to try
Im trying to read the tag but it always says ERROR: only Mifare Classic is supported how can i fix that
I know this is really late, but you need to have the right cards. If the cards are mifare classic supported then it will work
finally someone answered thanks@@qobrig
@@qobrig now they say 63 out of 64 ;(
MSI Installer for PC/SC Driver doesn't install for me I keep getting an error saying (missing the package file for installation) any assistance would be greatly appreciated
hi, i managed to successfully write to cards. well, the short thing is that you will have to write twice in a single run the bin files so you won't have to rewrite it.
It works, after doing it I just stop the program from the task manager and it lets me do it with no problem on the next card, sadly now I my reader wont read my cards, it will constantly put an INPUT/Output error and finish with Symbols no key found... Ill have to buy new cards to try to get other skylanders since It ended up bricking one of my skylander cards
while i am using mifare my nfc card readers ligth turns off right after i press "start decode & read tag and it wasnt happening with diffrent applications. Can i know why is this happening?
I genuinely don't understand what I'm doing wrong and information is so scarce on this. I did EVERYTHING right up to 11:38 but Im getting a "63 blocks out of 64" message and its hurting my brain so bad. Ive been using LEXI cards and they work great, no problems, super easy to mess with. Then I get a 30 pack of 1k nfc cards that look and supposedly function the same but they just dont.
This was so useful thanks
This video help so much thank you
I can’t get the file dump down into the blank tag. Any other ideas? I have everything downloaded, light on the reader is finicky (some no light, red, or green), read tag went good, and using tags that came with it.
If you haven't already try to follow the steps other youtubers did because i made this video after following every guide and video i could and none of them worked for me so if you are still having trouble I'm sorry but i have no clue what to do. I say just play around with it until you notice something good and work off that. try to understand how the program is working for you and build off that and eventually you will get it. it took me days to figure out how it worked for me but maybe for some reason it works a little differently for others
Thank you. I even uninstalled everything and started over. Which I might do again when I get the cards in the mail. Right now I am guessing that it might be 1) the included 2 cards that came with the device is the inaccurate cards needed to file dumb the skylander and/or 2) the device is not working properly as I’m not sure about the light indicator.
Maybe a third option that could have caused an issue is the program that I had to download to be able to open the driver for the ACR. I don’t know if that matters or not.
The blank tag dump file is not changing to the dump I want. I have done everything else correctly and would greatly appreciate help.
can you make a vid without using mwt but still on pc cuz i bought mifare ultralight cards instead of the classic ones and mwt only supports the classic cards
I dont think skylanders work with ultralight, correct me if im wrong though, and to make a vid on it if it did work id need to buy them which im not in the position to do right now
I am having a problem installing the MSI Installer. When I try to open the file after I completed the downloading, the computer gives me options on which app I should use to open the file instead of being a normal folder. The only app I have that works for the file is Word, and it only gives me pages of codes. Which app do I need in order to properly install the MSI Installer?
Aye me too lmk if your problem was fixed
can you use a phone with nfc for this? the readers are expensive AF over here
It just doesn't work for me, I always get the error message Tag was removed?
thanks a lot bro, u save my life and my nfc cards lol
I have Gen2 NFC cards, so when i use magic card gen2 it works perfectly, but when i try to wipe the nfc card (change uid to 00000000) it just doesn't work, and it just says: no keys found. and i've followed your guide many times. And sometimes, it does (almost) work, but i get the error: nfc_initiator_init: Input / Output Error. and when i click on read again, it just does nothing. very weird.
I have the same problem and I am not able to solve it :(
@@davidhorvath2678 i fixed it. it turned out the cards didn't work after all and i bought new ones (again) after that it worked perfectly fine. just make sure that when you write the card, you click gen2 and not gen1. i can send you the link for the cards if you want. but i live in the Netherlands, so im not sure if you can get them (its on aliexpress).
it will not change the blank tag dump file
Here as well
I have seen your video on how to create NFC cards and in the program I get the following error: "only mifare Classic is avalible" how do I solve it?
P.D. very good video
I’m so dumb I can’t figure it out is there supposed to be a light on my nfc reader because that is not appearing?
Is there any video on how to make a Sensei? I can't find anything and with the softwa&re I'm using I can't make senseis.
i keep trying to Get the dump files to save on the "Blank tag dump file" 11:01
but it does not work
I can’t access blank dump
@@gleno6298 oh hello, i eventually figured it out. Thank you though! Shit gets so confusing.
I get a only Mifare Classic is supported error, do you know how to fix this?
You found a solution?
He starts the process of making the card at 6:19
it says 63 out of 64 blocks, usually this means its the wrong type of card problem is i have tried all manafacturers available to me and somehow still get the same error is there some way to fix this?
same problem here but every now and again it scans then says error with card
@@Its_chooknif you guys find a fix pls let me know
@@linkdapuppyandfriends9023 i believe that just means it’s the wrong card type
I’m having the same problem rn too
Any solutions? Still can’t get 64/64
Have you had any luck doing this with the Imaginators characters?
I can successfully make cards for Giants, Superchargers etc but all the Imaginators ones I've tried either don't work at all or the game thinks the characters are corrupted (but can't repair them). I am using the dumps in your links above.
I dont have the Imaginators games, so im not sure if they work. I can try to get an emulated version of the game and see if it works on there, but i cant do that this week. If the files i have dont work after doing some testing, ill have to look for new dump files. Ive had an issue with that emulating the game in the past and just downloaded a different set of .sky files to use on an emulated portal within dolphin emu but ill have to look for dumps now. If i end up having to find the .sky files again and convert them to dumps (if that even works) Ill make a separate video on that.
@@MalevolentAB No problem (and don't worry if it is too much trouble). I'll keep searching around and see if others have been able to do Imaginators. I'm confident my process is ok given I've got them working for the other games.
@@rossmyers8448 Sounds good, Ill just do it as well in case other people need them too, if i have the time of course
I had the same problem. i tried making ro bow and it just said its corruped and cant be repaired.
@@sarahsmart5024 I'm not sure what set up you are using but I was using the Android App (MiFARE Classic Tool) and that was the issue.
It says it writes the UID but it doesn't appear to even though the box is ticked, the problem with the Imaginators figures is they have a higher level of security/encryption than the older games. Unless you can do a 1:1 clone of absolutely everything from the figure it won't work.
So for anyone else who reads this in the future, in the end I got a USB ACR122U Tag writing device, used the Windows version of the tag writing tool (MiFARE Windows Tool) and the Imaginators character dumps are cloning perfectly now.
hi, do you have more dumps and do i just need to scan this on my phone or what and more dumps but not skylander?
Thank you so much bro 🎉🎉🎉🎉
OMG THANK YOU SO MUCH
How to change blank tag dump file, it picks ones i already used please help
I did dragons peak in giants, but the sound and dialogue was muted. Only in the level though.
can you use a skylander portal as a writer/reader?
Nope.
I keep getting Error Tag Removed. Anyone know fixes this is my second batch to do this.
did you find a solution? I have the same error.
So I followed the guide to create skylanders cards, but for some reason for me it only shows 63 blocks instead of 64. How do you get miFare to write all 64 blocks? I'm confused
Do you have a solution?
Any solutions I use to get 64/64 I only get 63/64
I found some cards with 13,56 mHz, rewriteble UID and 1K, do they work? Do the (Yosoo NFC ACR122U RFID Contactless Smart Reader & Writer + SDK + 5X IC Card) work as a reader?
not sure, all i know is the stuff i used because it worked for me so i cant really say, but if the specs of what u have match what i have described in the description and video then it should
instead of saying dump keys from character, it says mfc-(id)
I really need your help. This tutorial has really helped me to get much further than before, but everytime I write the card it only writes 63 of 64 blocks and I don't know what to do. Any idea?
Most likely if its not a software issue its the cards. I liked the cards i use in the description. If that doesnt work then it must be a software issue
@@MalevolentAB I've seen you talk about the possibility that it isn't a zero-sector card. Could that be the case? Im trying to send the cards back currently, but maybe I'll try to do it on a different computer before.
Thanks
@@Johnny_L1 Can you reply to this message with the timestamp so i can hear what u are hearing? Its been a while since i watched my own video lol. The cards have to be a certain type so you can access the 0 block
@@MalevolentAB You didn’t talk about the sector 0 in the video, you spoke about it in this comment section. It’s fine though, I think I really bought the wrong cards. I’ll try again on a different computer, but if it doesn’t work there, I’ll buy new cards
I got a card working, but when i put on a fresh new card on without anything, it keeps the data and says its been read and writable, and when i write it it says aborting when i didn't click anything.
Do you know where the ".key.dump" files come from? I have the ".dmp" files from my originally played skylanders and don't know if they would work
Can this be done on samsung phone using mifare classic or tagmo?
What do I do if it keeps saying “only mifare classic is supported”
That’s what it did for me idk wtf to do
@@danielfonville1840 I had to buy different card
it wont work i followed all the step but it just does not put the figure on the card
Try to keep repeating the steps until the figure is on the card, the process is stubborn
@@MalevolentAB oh i figured it out thank you
@@giovanimorales774 do you mind explaining how you fixed it?
@@MalevolentAB i forgor that was months ago
@@MalevolentAB i think i kept resetting and rewriting the card
Is there anywhere to find the dump file for the Cursed Tiki Temple Blue Chest? I have only been able to locate the Lost Imaginite Mines Chest dump file.
For me all the Skylanders work except for the trap team Skylanders. It always give me torch from spyros adventure idk why.
Nvm I fixed it. I’m on the switch and all I had to do was get rid of torch on the quick pick.
Thankyou so much for the video brother! Absolutely awesome content!!🔥
I still get the error message saying the driver is not installed lol... I'm waiting on my physical reader in the mail still, could this be the issue?
I dont think so, id say wait till you have the card reader and try the process again. If that doesnt work im not too sure what the issue could be. Maybe downloading a more up to date version? i have no idea. It was hard for me to get the message to go away
Did you ever get your reader? I have mine coming in a few days and this is the problem I'm currently having. Hoping the programs aren't currently bugged.....
@@c0nn0rnyes, it worked for a while but now just errors...
when i click in read tag, says: "ERROR: only Mifare Classic is supported" WHY?
When I do all the steps you said to do, it shows the orange error message "ERROR: only Mifare Classic is supported"
Where did you find the dump files ?
mainly on reddit and google searches
Can you explain the second application? MIFARE Classic Tool beta 0.1 They say it's easy
Hello!
It doesn't work for me because when i search for the skylander dumps i downloaded, after clicking "write tag", i just can't find them.
They aren't there for me and i don't know what to do.
Please help me.
just found out that i don't have the right cards
The pre release version of mifare is no longer up. can i use the new one that is bugged and it will still work?
FYI the cards he had linked in the bio DO NOT work for skylanders nfc cards
Can anyone please give me directions on how to delete the libusbk driver, I accidentally installed it multiple times and I can't figure out how to delete because the help page on github is deleted for some reason and literally no corner of the internet will give me a concise answer.
Ive had the same issue! Have you worked it out? Been struggling for 4 days
just click your local disc (C:) and you will see libusbk. click the folder and run the uninstaller
Can the tags be formatted to put something else on it?
I followed your steps but something goes wrong... when I try to set the UID to 0000000... MWT just closes itself, I don't have anything else open and I do not know what could be the reason
Hello! I'm trying to replicate your process, and it's worked for me once after much deliberation. MWT frequently selects the wrong dump input field, making me overwrite my skylander dump instead of loading it onto the card. Is there any way to circumvent this issue and decide in which field the selected dump file goes?
The file I get from clicking on the MSI installer doesn’t match up with what’s in the video.
Ill put my MSI in the description in a google drive then if your having issues
@@MalevolentAB I have been and thank you so much.
@@MalevolentAB Just found the google drive version and even when I download the folder from there, it still only shows up as one file everytime I download it.
@@MalevolentAB well, turns out I just didn’t have a rar file extractor
i still get the errors every time i use select source dump it wont apear in the black tag dump file section idk how to fix it but still this video was great help even though mine still doenst work :(
Hi. I am doing everything presumably right and I'm still getting a this skylander has an error message. I can't afford to buy the 100 pack of cards so I'm trying to find another alternative, but still nothing has worked. Do you have a suggestion or another pack of cards I can try? Thanks.
so im getting a
*ARC122U Tag reader driver doesn't seem to be installed. Click OK to be redirected to on the driver download page. Install driver last version named 'MSI Installer for PC / SC driver'*
is that appearing because I messed a step up or because i dont have a NFC reader/writer plugged in?
ive followed every step exactly excpet for the one involving unplugging and re-plugging in the reader/writer as ive not got one (yet)
Same. Did you find a fix?
i do every thing in the video but i cant get the dump file in the blank card slot and the portal dose not recognize the card
🐐
I made a bunch of them and they all work in single player, but when i try to play with my brother it only registers one at once
@MalevolentAB what can I do if my MWT keeps shutting down on me when I try to read or write or edit cards
@@Toxinspuppetmaster honestly im not sure, its been so long since ive used that software. When i make nfc skylanders again ill have to see if theres an updated way to do it because it still seems like so many people are having issues
Thanks🎉🎉
Hello!
Do you know why I am keep getting the error message when I open the app which says that "the ACR122U tag reader driver doesn't seem to be installed" (I have already installed it). And also when I close that window, the app simply says that no tag detected on reader even tough the card is on the reader. And the reader makes a beep sound when I put the card on it which I suppose means that It detects the card but the app somehow doesn't.
Are these 2 problems related?
How could I fix these problems?
You could just try re-plugging it in. Its happened to me before and re-plugging it in works. right click on windows icon, click device management, click on smart card readers, right click on ACR122U and click uninstall. After that you will need to re-plug it in and install the ACR112U driver again. If that doesn't work do the same thing and try to search automatically for drivers rather then uninstalling them. If your still having trouble let me know.
edit: yes im pretty sure these 2 problems are related
@@MalevolentAB Thank you for the answer.
I’m gonna let you know whether it works or not as soon as I can.
One more question: Does having the reader plugged in or unplugged have anything to do with the error message?
I mean it shouldn’t appear in either case right?
@@mightysteak1262 Plug in the reader before starting MWT and u might wanna keep it plugged in while installing drivers to be safe
@@mightysteak1262did it work? Having similar issues
The scanner will not turn on, and no matter what i do, unplug it and plug it back in, etc. i would do anything for this to stop.
Does your computer recognize it in Device Manager? If so, right-click and press uninstall, then re-install all the drivers
How do you do that
i had bought 40 nfc cards that are apparently the wrong type. i got mifare utralight instead of mifare 1k. is there a way i can use those or do i need to return them?
Nothing is working. Cards never write enough bits and reader doesn’t register half the time. Any help would be appreciated
hello i get a messege ERROR: only Mifare Classic is supported. how do i fix that
Hello I cannot get the dump file to drop down to the blank tag dump file any advice on how to get this to work?
Hello im from spain this stills work at 2024 because i do the same like in the video and don t works anything help pls
Hey is there a list of compatible cards anywhere? The ones linked are a bit too expensive and i found a few with to the same likeness that were half the cost
Maybe try buying smaller packs if they are too expensive. Also if the cards have the exact same properties as what i listed in the description u should be good. Last time i tried to go for cheaper cards and didnt know fully what to look in cards i ended up getting the wrong ones that dont work with skylanders
@@MalevolentAB Thanks! I’ll get them from Amazon so I can always return it if they don’t work
@@MalevolentAB -hello. After everything arriving i went to test it out and it the tutorial works until i place it on the portal. In Mifare it says 'finished' and it says the name in the blank tag dump file. When i place it on the portal nothing happens however-
Edit: Nevermind, seems like a faulty card - worked on a different one