I would like to see you carry this project a bit farther. Make several "bowls" like you did the first one of gradually smaller sizes, and then nest them inside each other like a flower. Then drill through the bottom and mount a light inside to make a hanging ceiling lamp. I think that would make a killer project and be worth a lot of $ to an art fancier. (Besides it would be SO cool!).
Hey nick if you try this again I'd suggest trying one of those plastic kids pools as mold. I don't know if you would get separation with that type of plastic but you could line it. They're already round and some have a honey comb pattern that would look neat if it didn't flatten out during the forming stage
@@tipsygypsy3613 yes, great minds think alike. But I wouldn't the plastic of the barrel be sturdier and more heat resistant? I mean wouldn't the pools (both blow up and a kiddie pool) melt?
The only way we can truly learn is to do it. Things don’t always turn out the way you thought but I love your perseverance. Great job on those bowls. I look forward to seeing what you come up with next.
Laura...this was clickbait and has nothing to do with learning. NOW, if he said I am going to see what will happen if this or this is done...THAT is learning. Otherwise, it's up the algorithm so I can get more views and make more money. That's what this video was about. Him profiting off you.
@@morgancalvi6675 cynical much? Of course he profits from these videos, how else is he meant to fund these projects? Doesn’t mean he’s not learning. The fact he posts videos of project that have failed or not worked as expected shows that he’s learning all the time. You don’t like his videos? Just keep scrolling, it’s better than being a troll👍
Love the results and you can always stack them inside each other to give a sculpture feel to it. Just a few tips Nick 1 level surface 2 no creases 3 wooden sticks around perimeter (under plastic) will prevent runoff 4 if resin is too hard to drape - you can soften it with a heat gun.
Nick, have you thought about using a small, hard plastic kiddie pool, lining it with a very large sheet of thick plastic (one sheet to cover the whole bottom and walls of the pool)? This should prevent leaks and the resin separating due to creases from separate sheets of plastic.
@@morgancalvi6675 What are you talking about??? the title is "I *attempt* to make the biggest..." He didn't claim to have made it. I think this experiment was cool, and I look forward to seeing him try it again, learning from what went wrong in this video and improving on his process. I think people have given him some interesting suggestions.
@@LoriPeace he liked my statement...go look up the word...it is something catchy to LURE you in. But isn't the end result. Are you lured in??? I had floor vases probably 5' high. This was the size of a candy bowl. So what are you talking about??? Please go away.
@@morgancalvi6675 Go away yourself if you dont like what you are watching. Those of us who have followed Nick for years know he is humble and genuine, and has clearly stated his intention, not the end result. If you choose to deliberately spoil others innocent enjoyment, dont be surprised to get critical or unfriendly responses to your unkindness.
I kinda like some of the messed up experiment ones better than the tester. Some of them looked like campfire flames or ice crystals, and the creases gave a cool effect.
I hope that we see another video of another attempt at this, as I feel that if the floor covering were smooth and flat (with maybe an raised edge to stop overflow/spreading out too thin ?) then a HUGE gorgeous sculpture/bowl could be created ... and THAT I'd LOVE see ! =DDD
We are encouraging clickbait...that's all this was. Nick even hearted the fact that I said 'clickbait' because he was simply trying to get ratings up. Deception is a form of thievery.
I am a fan of this type/style of art -- which is exactly how the pieces turned out -- as art. From the wrinkle patterns to the "holes" in the finished pieces, each piece is so unique. Awesome experiment, sir!
@@morgancalvi6675 did he reject you in some way? It’s pretty evident he’s simply more comfortable in front the camera. I don’t like every project Nick does but that’s not really the point of his videos, it’s about the process and him trying new ideas.
I loved the fiery orange/red pieces most! The smallest one is really special - it's almost like a 'splash' frozen in time, in resin ❣️ I love the way the light reflects off the creases in the largest orange/red one - just gives it something extra. You've made beauty out of chaos again!
Nick - here's another idea: First off, I DEFINTELY think you should give this another go. But, how about this so you don't have to pry the whole sheet of free-form resin off a large plastic sheet - devise the platform in such a way that when the right time comes to mold the resin over a form, you can raise a form up from the underneath the platform!! Kind of like cutting a large hole in a sheet of plywood where the plywood is the flat surface where you cover it with the plastic sheeting material, place the forming structure underneath the plywood, pour the resin then in about 2-4 days (I guess) raise the form up through the hole. This would lift the resin up and you could simply push it down around it and then let it sit again until it hardens - thoughts??? :-)) Kevin
I would love to see a giant one too. I likes how these turned out even though they weren't the plan. I really love how the tiniest one looks like a stingray without a tail, so cute!
They actually turned out pretty good. I like how you experiment with things and it looks like it’s going wrong then boom you have something awesome at the end.
Absolutely amazing! Sometimes when things don’t go exactly as we planned we accidentally create absolute works of art! This is what happened here! I love your creative heart! Keep at it! There are pieces in museums that are no where as cool as these! Enjoy watching your process and creative ideas! Thanks!
I like this idea so far, just a thought, build a platform 6'x6' with a hydrolic ram in the center. Then after a few days, start raising the ram slowly. 👍
I agree with you on this , how ever I do not think he has that kind if set up. But you are onto something here , ideas thinking that after the first day of it setting he puts the first bucket under it and then each day or even half day add another bucket under it until either it is fully cured or to the point it is high enough that the resin is thinning out . Also I feel leaving the creases in the plastic gives it character and tells a story in the desine like rivers flowing through the resin. But yes a flush to the ground hydraulic lift would be the optimal way to do it slowly raising it as it sets .
I thought they looked like the venetian blown glass objects you can see in a museum! Would love to have one and put a small battery light in it at night!
These sre all really stunning, love how each one has come out. When you first mixed the big one on the floor, it looked like a painting of a really pretty fish (well I thought it did). Love your work and your ideas. Stunning 😍. Till next time Nick 👍. Never change you always make me laugh and produce amazing stuff. Keep it crazy 🤪 x
I can't help but think how lovely a couple of those nestled together would look with a flickering light in the middle. It would make a tremendous floor piece or flipped over the largest one would make a wild hanging light. I don't understand your mind at all but I love watching the process...you're quite an artist!
The orange one in the last lineup is really gorgeous. It would look absolutely stunning on any Thanksgiving table as a centerpiece. Maybe this project didn't go the way you planned (hope your floor got sorted), but the results are beautiful!
I think the wholes, creases and 'imperfections' make them even more beautiful!! You did a great job on these, I can't wait to see what you come up with next! ♥️♥️
I love this idea and I love how different it is from what you normally do and from what everyone else is doing! I'd love to see more experiments like this. Also they look like fruit roll ups!!
This is one of the reasons i like watching our videos and thats because you dont pretend everything was ok 1st go. You show us when things go wrong and i find it really interesting when things go wrong because it gives you a chance to learn and see why things go wrong.
Totally awesome and totally beautiful. I admit that I had doubts that it would work. Now you have an incredible work of art. Thanks, Nick p.s. Please try this again.
Nice results, regardless of the mishaps. Looks like Taffy. I would definitely like to see the results of a rerun with the plastic laid down on a smooth surface without the creases and perhaps with a boundary to prevent the resin from escaping. I imagine putting thick rope, or hose underneath the plastic in a rough perimeter would work - sort of like a giant wonky egg ring
Please do this project again but being sure to run a band of plasticine clay around the “down hill” end of your floor/boards. And I still love the results of your experiment. Do one with all warm colors so it has a flame like appearance.
Perfect timing! I’ve booked my ticket for May 1st today and I spoke with Entropy Resin in February. They could not have been more helpful. Nice pieces, Nick. See you in May 🌞
Let us know when you do take 2. 😆 BTW you might want to try a pool/pond liner and raise the edges just to make sure that you don't decorate your floors anymore then needed.
WHILE IT WAS soft, you could have folded it over and over onto itself (Lake Damascus steel) until you got it the right size for a good blank... and then turned it on the lathe into something really cool. 🐂🤠🐂
Oh my! Bless your heart! I winced watching you scrape that gooey mess off your floor. Love your spirit & creativity! Each and every one of those resin sculptures is a beautiful piece of art! Yeah okay take care, be safe.
Love all the vases that came out of this experiment. They would be so cool to put candles in and the colours would reflect back onto walls and other features around the house. Just wondering if you have to peel it off the original backing sheets, as I think it might help just to lift it off the floor with the backing sheet still attached and then you wouldn’t be adding stress to the resin by pulling it apart. The only problem I can think of would be that when it creases and sets it might catch some of the backing sheet between the resin and it would be harder to remove the plastic.
Can I just say I am SOOOO STOKED you got sponsored by Entropy Resins!!! Like, that’s what you use the most so being sponsored by what you use is awesome. As for these, I think it’s a wild, awesome concept. I’m certain you’ll be able to come up with even more cool creations using this method. It’s so cool!!! 👏👏👏 these remind me of those HUGE art displays of the blown glass flower/bowls you see in museums and art galleries.
It's frustrating when your project doesn't turn out how you want it to...you think you plan for everything then some new problem comes up. But I really love your positive attitude. You're always trying to see the best outcome. I think they came out great they look sooo cool. very unique !!! Just like everything else you do! How you did the dye makes them look like glass bowls!
I think they are absolutely beautiful! It may not have turned out the way you want them but the art in it is absolutely amazing! I think you did a great job!!
I love them even the holy one's! I would add some clear resin in the bottoms and leave the slits open as a work of Art because they are beautiful to the eye of the beholder! Thank you Nick, you made my day! Now I know how to mold resin into different shapes for different uses! That's off the charts Awesome!
Beautiful ❤️ you don't need everything to be perfect it's pretty great and out seems you had a lot of fun 😊 love videos like this keep posting we love you 🥰
Nick, I think they turned out amazing. Would love to see you giving a huge one another go. The colours are stunning. Love to watch your channel. Thank you for sharing your ideas
Nick, I love this project. The acrylic rods looks like air turbulance in a high speed photo. If you turn, polish, and put it on a wooden stand it is a masterpiece.
I'd love to see you try this again. But I also want to thank you for sharing when things don't go off exactly right. Makes me realize even Pros gotta keep trying
Love them!!! I have use a garden hose or rope to make a perimeter, then lay a plastic shower curtain down (shiney) and heat the room to leti it relax or use a heat gun. Pour directly on it ( alcohol ink can fade so I don't use it - resin dye instead) and pick the whole thing, curtain and all and drape over your form. A heat gun will help to soften it a little to help it drape. Can't wait to see more!!!
They all turned out fabulous but my favorite one is the big one. It is absolutely gorgeous! I'm glad your original plan didn't work out. You ended up with some beautiful pieces.
Always love that you think outside the box and try something different, may not have turned out as you first imagined, they do still look pretty funky!
Love what you have done last video and this, abstract wacky works look amazing! The sticky floor stuff is a nightmare to use single handed, but this idea was brilliant and think this is worth another go, love it, Thank you great video 👍
I LOVE these!! Super creative!! The project may not have worked out as you expected, but everything you do is an entertaining experience and if you're learning, it's a success!
Well done! The original test piece is my favorite, but each piece is unique and beautiful! Your experiment turned out a total success! Love your videos, see ya next time!
I love your content so much. I hope you never stop making videos. There’s pieces came out so cool. my favorite is the big orange one. Keep up the awesome work!!
Beautiful example of happy accidents and live and learn. I love the way the creases look on the end product, even if they got in the way of your initial vision. They look a little bit like candy too, which I think makes them look so much cooler.
Sometimes when a plan goes aerie ....The results are spectacular.......Even the mostly blue one with all the ventilation in it........I would put any one of them on display in my home! Brilliant !!!!!!!!!
I would like to see you carry this project a bit farther. Make several "bowls" like you did the first one of gradually smaller sizes, and then nest them inside each other like a flower. Then drill through the bottom and mount a light inside to make a hanging ceiling lamp. I think that would make a killer project and be worth a lot of $ to an art fancier. (Besides it would be SO cool!).
I was thinking that was what he could do with the ones he made, stack a couple together. Could make some very cool bowl/vases.
That would be so beautiful 😍
I really like this idea! A hanging light would be awesome
I have to agree. This could be a very interesting concept.
My thoughts were similar, but i was thinking lamp shades for hanging lights.
I love that you show the ones that don't turn out quite like the way you wanted. And that you keep trying.
Hey nick if you try this again I'd suggest trying one of those plastic kids pools as mold. I don't know if you would get separation with that type of plastic but you could line it. They're already round and some have a honey comb pattern that would look neat if it didn't flatten out during the forming stage
I was thinking an oil barrel.
Maybe an inflatable kiddie pool rather than a hard bottom one
Would definitely like to see a part two to this experiment
I had the same idea, was thinking a blow up pool might release better? Great minds!
@@tipsygypsy3613 yes, great minds think alike. But I wouldn't the plastic of the barrel be sturdier and more heat resistant? I mean wouldn't the pools (both blow up and a kiddie pool) melt?
Mistakes made, lessons learned.
Please, DO IT AGAIN!!!!
If nothing else, Really cool art!
The only way we can truly learn is to do it. Things don’t always turn out the way you thought but I love your perseverance. Great job on those bowls. I look forward to seeing what you come up with next.
Laura...this was clickbait and has nothing to do with learning. NOW, if he said I am going to see what will happen if this or this is done...THAT is learning. Otherwise, it's up the algorithm so I can get more views and make more money. That's what this video was about. Him profiting off you.
@@morgancalvi6675 cynical much? Of course he profits from these videos, how else is he meant to fund these projects? Doesn’t mean he’s not learning. The fact he posts videos of project that have failed or not worked as expected shows that he’s learning all the time. You don’t like his videos? Just keep scrolling, it’s better than being a troll👍
Love the results and you can always stack them inside each other to give a sculpture feel to it.
Just a few tips Nick
1 level surface
2 no creases
3 wooden sticks around perimeter (under plastic) will prevent runoff
4 if resin is too hard to drape - you can soften it with a heat gun.
I saw another artist make a resin end table that was bent over a mold by leaving it in the sun!
@@ntuidme Yes, I saw that too. It was a neat idea.
Nick, have you thought about using a small, hard plastic kiddie pool, lining it with a very large sheet of thick plastic (one sheet to cover the whole bottom and walls of the pool)? This should prevent leaks and the resin separating due to creases from separate sheets of plastic.
Great idea! Nick, don’t give up on this project! I think you of all people can make it happen.
@@Christackleberry see Nick...people had faith this was a legit video. What happened?
@@morgancalvi6675 What are you talking about??? the title is "I *attempt* to make the biggest..." He didn't claim to have made it. I think this experiment was cool, and I look forward to seeing him try it again, learning from what went wrong in this video and improving on his process. I think people have given him some interesting suggestions.
@@LoriPeace he liked my statement...go look up the word...it is something catchy to LURE you in. But isn't the end result. Are you lured in??? I had floor vases probably 5' high. This was the size of a candy bowl. So what are you talking about??? Please go away.
@@morgancalvi6675 Go away yourself if you dont like what you are watching. Those of us who have followed Nick for years know he is humble and genuine, and has clearly stated his intention, not the end result. If you choose to deliberately spoil others innocent enjoyment, dont be surprised to get critical or unfriendly responses to your unkindness.
A lot of art comes to light in accidental ways, I think they all look like beautiful art pieces for a gorgeous hall table!! Love them all
I kinda like some of the messed up experiment ones better than the tester. Some of them looked like campfire flames or ice crystals, and the creases gave a cool effect.
I hope that we see another video of another attempt at this, as I feel that if the floor covering were smooth and flat (with maybe an raised edge to stop overflow/spreading out too thin ?) then a HUGE gorgeous sculpture/bowl could be created ... and THAT I'd LOVE see ! =DDD
We are encouraging clickbait...that's all this was. Nick even hearted the fact that I said 'clickbait' because he was simply trying to get ratings up. Deception is a form of thievery.
@@morgancalvi6675 oh wow, you really are trolling. I expect he hearted your comment to let you know your negativity doesn’t impact him.
Yes, please attempt this again
Definitely want to see a second go at this one!
I am a fan of this type/style of art -- which is exactly how the pieces turned out -- as art. From the wrinkle patterns to the "holes" in the finished pieces, each piece is so unique. Awesome experiment, sir!
I came into the comments to say this as well. The wrinkles added interest.
Agreed!!!
@@morgancalvi6675 did he reject you in some way? It’s pretty evident he’s simply more comfortable in front the camera. I don’t like every project Nick does but that’s not really the point of his videos, it’s about the process and him trying new ideas.
I loved the fiery orange/red pieces most! The smallest one is really special - it's almost like a 'splash' frozen in time, in resin ❣️
I love the way the light reflects off the creases in the largest orange/red one - just gives it something extra.
You've made beauty out of chaos again!
Looks pretty awesome. Even if they didn't turn out as planned. Love your stuff
Nick - here's another idea: First off, I DEFINTELY think you should give this another go. But, how about this so you don't have to pry the whole sheet of free-form resin off a large plastic sheet - devise the platform in such a way that when the right time comes to mold the resin over a form, you can raise a form up from the underneath the platform!! Kind of like cutting a large hole in a sheet of plywood where the plywood is the flat surface where you cover it with the plastic sheeting material, place the forming structure underneath the plywood, pour the resin then in about 2-4 days (I guess) raise the form up through the hole. This would lift the resin up and you could simply push it down around it and then let it sit again until it hardens - thoughts??? :-)) Kevin
really thinking outside the box. I like that.
Kind of the same process as vacuum forming you mean?
I would love to see a giant one too. I likes how these turned out even though they weren't the plan. I really love how the tiniest one looks like a stingray without a tail, so cute!
Some really cool pieces there. I would love to see a take 2 of this project now that you have a better idea of what will work! Love you Nick!
They actually turned out pretty good. I like how you experiment with things and it looks like it’s going wrong then boom you have something awesome at the end.
Absolutely amazing! Sometimes when things don’t go exactly as we planned we accidentally create absolute works of art! This is what happened here! I love your creative heart! Keep at it! There are pieces in museums that are no where as cool as these! Enjoy watching your process and creative ideas! Thanks!
Some really cool colour effects! I really like the more 'broken' pieces too 😊
You, sir, are simply BONKERS and I love every minute of it!! Thank you for sharing this with us. Simply beautiful!!
I like this idea so far, just a thought, build a platform 6'x6' with a hydrolic ram in the center. Then after a few days, start raising the ram slowly. 👍
I agree with you on this , how ever I do not think he has that kind if set up. But you are onto something here , ideas thinking that after the first day of it setting he puts the first bucket under it and then each day or even half day add another bucket under it until either it is fully cured or to the point it is high enough that the resin is thinning out . Also I feel leaving the creases in the plastic gives it character and tells a story in the desine like rivers flowing through the resin. But yes a flush to the ground hydraulic lift would be the optimal way to do it slowly raising it as it sets .
Those look like they belong in an art museum 😍 absolutely love them! Would love to see them made with glitter in it
I thought they looked like the venetian blown glass objects you can see in a museum! Would love to have one and put a small battery light in it at night!
These sre all really stunning, love how each one has come out. When you first mixed the big one on the floor, it looked like a painting of a really pretty fish (well I thought it did). Love your work and your ideas. Stunning 😍. Till next time Nick 👍. Never change you always make me laugh and produce amazing stuff. Keep it crazy 🤪 x
I can't help but think how lovely a couple of those nestled together would look with a flickering light in the middle. It would make a tremendous floor piece or flipped over the largest one would make a wild hanging light. I don't understand your mind at all but I love watching the process...you're quite an artist!
The orange one in the last lineup is really gorgeous. It would look absolutely stunning on any Thanksgiving table as a centerpiece. Maybe this project didn't go the way you planned (hope your floor got sorted), but the results are beautiful!
That was my favorite too, looks like flames 😍
I think the wholes, creases and 'imperfections' make them even more beautiful!! You did a great job on these, I can't wait to see what you come up with next! ♥️♥️
Very cool! Such a beautiful collection of art! Maybe do this again with a mold around the edge and make side tables with only colored resins
I like this project there's quite a bite of potential in this process! I hope you revisit this project & explore the different possibilities for this.
I love this idea and I love how different it is from what you normally do and from what everyone else is doing! I'd love to see more experiments like this. Also they look like fruit roll ups!!
This is one of the reasons i like watching our videos and thats because you dont pretend everything was ok 1st go. You show us when things go wrong and i find it really interesting when things go wrong because it gives you a chance to learn and see why things go wrong.
Totally awesome and totally beautiful. I admit that I had doubts that it would work. Now you have an incredible work of art. Thanks, Nick
p.s. Please try this again.
i think it needs a second chance as well!
Your creativity know no Bounds. Keep up the work and keep bringing the smiles 😁. Your videos have made living in a pandemic bearable. Cheers
Nice results, regardless of the mishaps. Looks like Taffy. I would definitely like to see the results of a rerun with the plastic laid down on a smooth surface without the creases and perhaps with a boundary to prevent the resin from escaping. I imagine putting thick rope, or hose underneath the plastic in a rough perimeter would work - sort of like a giant wonky egg ring
Great simple idea.
Those are pretty neat Nick. I love your enthusiasm and resilience! You're truly inspirational and very entertaining!! Thank you
After looking at all the separate pieces, I think it would look really cool if you stacked several of them inside each other creating a single piece.
Please do this project again but being sure to run a band of plasticine clay around the “down hill” end of your floor/boards. And I still love the results of your experiment. Do one with all warm colors so it has a flame like appearance.
Even the other smaller ones you did people would love to have them to put on glass top coffee tables or dinning room tables they are gorgeous.
Perfect timing! I’ve booked my ticket for May 1st today and I spoke with Entropy Resin in February. They could not have been more helpful. Nice pieces, Nick. See you in May 🌞
Hey happy days ray . Look forward to catching up 😊🥳
Let us know when you do take 2. 😆 BTW you might want to try a pool/pond liner and raise the edges just to make sure that you don't decorate your floors anymore then needed.
I REALLY Hope you do this again, after learning the do's and do not's (or should and should not's) PLEASE? This was super fun!
WHILE IT WAS soft, you could have folded it over and over onto itself (Lake Damascus steel) until you got it the right size for a good blank... and then turned it on the lathe into something really cool. 🐂🤠🐂
Oh my! Bless your heart! I winced watching you scrape that gooey mess off your floor. Love your spirit & creativity! Each and every one of those resin sculptures is a beautiful piece of art! Yeah okay take care, be safe.
Love all the vases that came out of this experiment. They would be so cool to put candles in and the colours would reflect back onto walls and other features around the house.
Just wondering if you have to peel it off the original backing sheets, as I think it might help just to lift it off the floor with the backing sheet still attached and then you wouldn’t be adding stress to the resin by pulling it apart. The only problem I can think of would be that when it creases and sets it might catch some of the backing sheet between the resin and it would be harder to remove the plastic.
Love the Resin bowls, very beautiful!!! Gifted Sir!!!
Can I just say I am SOOOO STOKED you got sponsored by Entropy Resins!!! Like, that’s what you use the most so being sponsored by what you use is awesome. As for these, I think it’s a wild, awesome concept. I’m certain you’ll be able to come up with even more cool creations using this method. It’s so cool!!! 👏👏👏 these remind me of those HUGE art displays of the blown glass flower/bowls you see in museums and art galleries.
I think the creases from the plastic go well with the color patterns. So stunning.
Don't give up! This is a good idea and you found the little problems. I think this is a great idea and would love to see you try again!.
Love the texture from the plastic you layer on the floor. Keep experimenting! You end up with fabulous and fun pieces
It's frustrating when your project doesn't turn out how you want it to...you think you plan for everything then some new problem comes up. But I really love your positive attitude. You're always trying to see the best outcome. I think they came out great they look sooo cool. very unique !!! Just like everything else you do! How you did the dye makes them look like glass bowls!
I think they are absolutely beautiful! It may not have turned out the way you want them but the art in it is absolutely amazing! I think you did a great job!!
I absolutely loved how the big main piece went rainbow!!! I so didn't expect that!
Crazy idea - exciting result! Keep it coming Nick, that was awesome!
Love that you made something out of a sow’s ear. Enjoyed the results.
They would look AMAZING with lights inside! Especially the big one!
I love them even the holy one's! I would add some clear resin in the bottoms and leave the slits open as a work of Art because they are beautiful to the eye of the beholder! Thank you Nick, you made my day! Now I know how to mold resin into different shapes for different uses! That's off the charts Awesome!
The way the dyes mixed is beautiful
Love this "fractured glass" art. Very good sir as usual 👏🏻👏🏻👏🏻😊😊😊
Beautiful ❤️ you don't need everything to be perfect it's pretty great and out seems you had a lot of fun 😊 love videos like this keep posting we love you 🥰
Nick, I think they turned out amazing. Would love to see you giving a huge one another go. The colours are stunning. Love to watch your channel. Thank you for sharing your ideas
Love the colors. I think they turned out really "funky ".
I love how the colors turned out. They all are very cool.
These pieces would make a beautiful light fixture. I really enjoy your videos.
I was so glad to see you back! Love your waffling!
Nick, I love this project. The acrylic rods looks like air turbulance in a high speed photo. If you turn, polish, and put it on a wooden stand it is a masterpiece.
I'd love to see you try this again. But I also want to thank you for sharing when things don't go off exactly right. Makes me realize even Pros gotta keep trying
these are soooo cool!! the large, rainbow one is awesome and that little, all blue one is wonderful.
I like how the colors turned out, how the cling wrap made cool textures and how you created a lot of fun shapes!
Very cool. I like how you show your attempts and that not everything works as planned.
Glad to see some recent videos. Please keep them going. You are very funny.
That orange and white one turned out amazing!! And hey now you know where you went wrong...and try again. Love your experiments
They all look really cool! Even if the project didn't go quite like you were hoping for it turned out unique! 😊
I love these really funky!! You definitely need to make more of these, playing with different shapes and colours. Really loved this video!!!!!
Love them!!! I have use a garden hose or rope to make a perimeter, then lay a plastic shower curtain down (shiney) and heat the room to leti it relax or use a heat gun. Pour directly on it ( alcohol ink can fade so I don't use it - resin dye instead) and pick the whole thing, curtain and all and drape over your form. A heat gun will help to soften it a little to help it drape. Can't wait to see more!!!
Awesome!!! Those of us in the creative world call this happy mistakes. Turned out amazing!
You really should have been an actor! I am glad you make these videos, they are highly entertaining.
I really liked some of the “broken” ones they are beautiful bits of art, sometimes mistakes are the most beautiful 😍
They all turned out fabulous but my favorite one is the big one. It is absolutely gorgeous! I'm glad your original plan didn't work out. You ended up with some beautiful pieces.
I love the texture that the plastic sheets made. it is very intriguing
I would love to see all the pieces of this”funkadelic”art stuck together. That’s one way to make it huge!
I just love your experiments and I think they are all very unique. Would love to see another video like this.
I came here for the Nick and hoped a vase happened! Never disappointed with your projects!!!!!!!!!!!!!!!!
Still amazing work Nick! Great job! Love from Australia 🇦🇺
Always love that you think outside the box and try something different, may not have turned out as you first imagined, they do still look pretty funky!
Keep waffling about You'll get it keep making the funny inspirational videos
I love this kind of thing. Thanks to Entropy.
Love what you have done last video and this, abstract wacky works look amazing! The sticky floor stuff is a nightmare to use single handed, but this idea was brilliant and think this is worth another go, love it, Thank you great video 👍
I'd like to see you explore this more, and or try again. It's really awesome.
I LOVE these!! Super creative!! The project may not have worked out as you expected, but everything you do is an entertaining experience and if you're learning, it's a success!
Love the red and orange 'shards' you made up into smaller bowls, Nick.
The big one looks very striking, too.
Do you think you will try again?
This one is cool, my hubby and I rooted for you, we really hoped it would have worked out. I hope you try again. They're so beautiful.
Well done! The original test piece is my favorite, but each piece is unique and beautiful! Your experiment turned out a total success! Love your videos, see ya next time!
That was so cool! I'd love to see you try it again. It would make a beautiful lamp shade!
I love your content so much. I hope you never stop making videos. There’s pieces came out so cool. my favorite is the big orange one. Keep up the awesome work!!
The first attempt was awesome! But there’s something about the orange one. It looks like an abstract fire. I love it. I think it’s my favorite!
Really fascinating outcomes. Like abstract images of flight. Thank you!
The small one is so pretty! Can't wait to see the it one!
Now that's what I call art. Way to go
Beautiful example of happy accidents and live and learn. I love the way the creases look on the end product, even if they got in the way of your initial vision. They look a little bit like candy too, which I think makes them look so much cooler.
Love that you are so optimistic! 👍🙂
Sometimes when a plan goes aerie ....The results are spectacular.......Even the mostly blue one with all the ventilation in it........I would put any one of them on display in my home! Brilliant !!!!!!!!!