@@TheRevitKid yes 🙌 the is most important when people want to explain something. But you explain so owsmm Thanks a lot for making such great videos for us.
I can’t decide which part is the best cause I think all of them are pretty awesome! Thanks a lot it was very helpful, would love to see more videos like that if you could.
I really like the concept. I probably would have set the doors in the back of the studios, or in the interior rear side allowing a tree to be planted between the two studios. My reasoning is that the line of sight from the studio closest to the top of the landscape actually looks into the stairs landing, railing, etc.
Correct, in this case I am using an in place component... Mainly because it doesn't need any fancy curves, etc... Same process applies if you used a mass....
Great video! Thank you for sharing. I’m a junior interior design student and I have been using revit for the most part of my projects. I know the fundamental things but when it comes to use more complex shapes I get stuck. Do you have a video where you show everything step by step and do more complexed shaped? I will really appreciate it!
So where is the part where manufacturing / building drawings get made and load bearing has been applied? How do you know the poles and guy wires are adequate (as an example)? Do you have a follow on video to show the round trip to engineering and back to a building that can actually be built? While you were massing this out, what sort of process do you go thru to ensure the buildings can actually be built and aren't just art? How do you decide what sort of manufacturing methods will be used, such as pre-fab, traditional stick built, acceptable materials, catwalk safety and egress, etc.?
You're describing the design process... As mentioned, this is concept design (not even schematic). Moving forward, the process is still very similar. Analyze, design, model it, collaborate, repeat... You're describing the entire architectural process, this is just step one.
This video is amazing! I am just starting to use Lumion and I found this video super useful. Thank you for sharing it! Could you do a tutorial about creating a topography plan in Revit from a CAD file? I just started following you. Looking forward to checking out your other videos and the futures ones Thank you!!!
Abraham Creation I’m not sure if i have a cad file video but I do have one showing how to use images >>> therevitkid.blogspot.com/2018/02/revit-tutorial-streamlined-topography.html?m=1 Cad files are simple as long as they are 3D contours... import cad, topography fold imprint, select CAD.
Ng YMing thanks man! I’m glad you enjoyed! My photoshop process is in an entire chapter in a video course called BIM After Dark - Volume 1 (including more in depth Lumion stuff, too) ... the course is available next week. Sign up here to get notified: bimafterdark.com/volume1.html
I talk about how to build your topography in Revit here > therevitkid.blogspot.com/2020/09/lets-talk-topography-creating-site.html And here > therevitkid.blogspot.com/2018/02/revit-tutorial-streamlined-topography.html
Thank you very much for this amzaing lesson making modelling easy as Rhino in Revit. But how could you seperate the wall and rood in later process and this will be very important for construction documentation.
@@TheRevitKid Thank you for the reply! Do you mean using "Model in place" to mdel and then set them seperatelly as roofs and walls or directly using roof- and wall families in sketch process? In the video around 7:54 I saw the upper part (roof) and the lower part (box) both showed as "Wall 1" in the property panel. How could you deal with seperating them as defferent categories later on?
@@han7959 no… the next step after this conceptual step would be to use the Wall and roof system families and either model by face or just manually model them and use the mass as a reference Similar to how I “wrap the mass” with standing seam wall type around 10 minutes.
Thank you for sharing! I’ve been following your blog/posts for years. Can you share any more info on how you imported the site topo into your Revit model? I always struggle with this... thank you again!
Thanks for the videos, I´m amazed. Just a question, when I try to change the category of the mass in-place, I get a warning "Changing to or from the Mass category is prohibited". How could you done it? Thanks :D
I have a question as a beginner. Are the foundations enough to carry the loads(live and dead) or can they withstand natural calamities? No hate please. Just asking.
@@TheRevitKid it's my workflow, for furniture i avoid revit due to it's time consuming family editor and i take advantage of the vast 3dwarehouse. Lumion combines models from revit and sketchup.
Really great video, I enjoyed seeing your process. I'm always looking out for a better collection of pens to use, would you mind sharing the type and brand of pens you use for your sketching?
Hey! Thank you! I talk about most of the pens I use in the blog post related to this video: therevitkid.blogspot.com/2019/08/revit-design-process-making-of-stilted.html
My job at the moment is modeling Industrial buildings for production with Tekla but in the future i also want to make renderings for architects or other contractors. Ive started to learn revit by remodeling my own house in the program. Video's like this are a great help to get me to the next level. For now im making my renderings within revit but i guess its not powerfull enough to make realistic renderings? Do you also maybe have some tricks or tips on stuff i can study on designing or modeling residential buildings? Ill for sure be checking out the rest of your video's!
If you're only able to export a single material white render, you can paint materials over in photoshop. Arqui9 visualisation is a good TH-cam channel for post processing rendering techniques
hello, how about the structure you used, did you calculate approximately how big the poles need to be ? and what material you are gonna use for a good solid strucure ?
Hey Riad, at this early stage I have not calculated the column sizes yet but they are being shown as 4" round steel tubes... I would imagine this would be enough... Once the project progresses beyond schematic those calculations will be done.
Cheers! I have over 1200 posts on my blog form the last 10 years with lots of tips and tricks (www.TheRevitKid.com). Definitely check out some TH-cam videos and Lynda.com as well. The one tip I will give you is you take a building (one of your favorite buildings or something you can find plans, sections, elevations, and photos of) and force yourself to model it in Revit. Its one of those programs you have to dive in and just break stuff..... Good luck!
what kind of family's do you need? there are quite a few manufacturer familys on bimobject.com, other then that i dont know any other major international websites for family's
do you think that someone without an architecture degree or college but expert in Revit with good design sense and competence can make a career designing houses? thanks
Not sure what you are asking.... It would be kind of hard to make a career out of something you haven't learned how to do (either through schooling or general experience)... Revit is just the tool here.
@@akawinterstorm7997 Yeah I know... I have 2019.. I wanted to test and review 2020. Seems silly to take the time reviewing something that is set to release a new version any day.
1. Sketching 3:44
2. Sketch Model 6:48
3. Wrapping the Mass 10:48
4. Sexy Revit Views 16:40
5. Sexy Renderings 25:18
Thanks for outlining the content!!
thank you!
The only TH-cam channel I found for revit who explains in a very good voice and not too fast. It helped me a lot. Thanks so much.
Wow, thanks! So happy it helped!
@@TheRevitKid yes 🙌 the is most important when people want to explain something. But you explain so owsmm Thanks a lot for making such great videos for us.
I love when i see good contemporary architecture in a BIM software tutorial.
Thanks Constantine !!
One of the best video I've watched on TH-cam. Period
David Amaya Gonzalez thank you !! I’m glad you enjoyed !!!
As far as the tutorial goes, this one hits right on the spot for me.
It is the level of outcome I want to be able to achieve.. Great work!
As an architectural student, it was very educational and insightful. Well organized and sorted steps in developing the final product.
Very informative video, The best thing I learned from this video is changing "family category" (@14:45)
I can’t decide which part is the best cause I think all of them are pretty awesome!
Thanks a lot it was very helpful, would love to see more videos like that if you could.
Mahmoud Hussain I most certainly will! Cheers!
I wish I could like this video more than once time... incredible explanation and tips. You're pretty good. Thanks a bunch!!
Rosiane Lopes thanks! Like and share all you want ;)
the interface of revit is awesome, im an archicad user, well done
great video
Awesome man! I am glad you found value, even as an ArchiCAD user ;)
The real question is why haven’t you still done a tour of your sketchbook those sketches looked awesome !!!
Heilong thanks!!! That’s a good idea!
sorry multiple comments today, was just looking for the curtain system videos two you mentioned in this video, thanks again!
Very informative. Definitely subscribing. Would like to know how to add more filters to 3d views in revit. Especially shadow effects
I really like the concept. I probably would have set the doors in the back of the studios, or in the interior rear side allowing a tree to be planted between the two studios. My reasoning is that the line of sight from the studio closest to the top of the landscape actually looks into the stairs landing, railing, etc.
Thank you for your video! Very interesting and helpful!
I always go back to see this . Is very inspiring.
You said it was an in- place mass, but is actually an in-place component isn't it?
Correct, in this case I am using an in place component... Mainly because it doesn't need any fancy curves, etc... Same process applies if you used a mass....
i love this workflow... am so glad I went down this Revit-Lumion path. This channel helped in my journey, Thank you @therevitkid
Glad to hear it Jerry! Cheers!
Great video! Thank you for sharing.
I’m a junior interior design student and I have been using revit for the most part of my projects. I know the fundamental things but when it comes to use more complex shapes I get stuck. Do you have a video where you show everything step by step and do more complexed shaped? I will really appreciate it!
So where is the part where manufacturing / building drawings get made and load bearing has been applied? How do you know the poles and guy wires are adequate (as an example)? Do you have a follow on video to show the round trip to engineering and back to a building that can actually be built? While you were massing this out, what sort of process do you go thru to ensure the buildings can actually be built and aren't just art? How do you decide what sort of manufacturing methods will be used, such as pre-fab, traditional stick built, acceptable materials, catwalk safety and egress, etc.?
You're describing the design process... As mentioned, this is concept design (not even schematic). Moving forward, the process is still very similar. Analyze, design, model it, collaborate, repeat... You're describing the entire architectural process, this is just step one.
You're famous at my old university's school of architecture.
Awesome! What school!?
@@TheRevitKid Wolverhampton University School of Architecture in the UK, there was a lecture on the use of your website for learning Revit.
This video is amazing! I am just starting to use Lumion and I found this video super useful. Thank you for sharing it! Could you do a tutorial about creating a topography plan in Revit from a CAD file? I just started following you. Looking forward to checking out your other videos and the futures ones Thank you!!!
Abraham Creation I’m not sure if i have a cad file video but I do have one showing how to use images >>> therevitkid.blogspot.com/2018/02/revit-tutorial-streamlined-topography.html?m=1
Cad files are simple as long as they are 3D contours... import cad, topography fold imprint, select CAD.
Great Video!!!
Do you mind showing those photoshop process in another video? :D
Will really help our on creating those pose-lumion rendering
Ng YMing thanks man! I’m glad you enjoyed! My photoshop process is in an entire chapter in a video course called BIM After Dark - Volume 1 (including more in depth Lumion stuff, too) ... the course is available next week. Sign up here to get notified: bimafterdark.com/volume1.html
Nice tutorial,
At the Sketch Mass Step we can see landscape line.
How did you open any Topography map in your project?
I talk about how to build your topography in Revit here > therevitkid.blogspot.com/2020/09/lets-talk-topography-creating-site.html
And here > therevitkid.blogspot.com/2018/02/revit-tutorial-streamlined-topography.html
@@TheRevitKid Thanks a lot. That's really helpful
Please do a tutorial of the roof components for this project. I'd appreciate that a lot!
What a Master classe!
Marcelo Monteiro cheers! Thanks man I’m glad you enjoyed !
Thank you very much for this amzaing lesson making modelling easy as Rhino in Revit. But how could you seperate the wall and rood in later process and this will be very important for construction documentation.
You would just model them as roofs and walls… it’s really simple actually !
@@TheRevitKid Thank you for the reply! Do you mean using "Model in place" to mdel and then set them seperatelly as roofs and walls or directly using roof- and wall families in sketch process? In the video around 7:54 I saw the upper part (roof) and the lower part (box) both showed as "Wall 1" in the property panel. How could you deal with seperating them as defferent categories later on?
@@han7959 no… the next step after this conceptual step would be to use the Wall and roof system families and either model by face or just manually model them and use the mass as a reference Similar to how I “wrap the mass” with standing seam wall type around 10 minutes.
Thank you for sharing! I’ve been following your blog/posts for years. Can you share any more info on how you imported the site topo into your Revit model? I always struggle with this... thank you again!
UVaJester hey man! This might help >> therevitkid.blogspot.com/2018/02/revit-tutorial-streamlined-topography.html?m=1
TheRevitKid | Nice! Thank you.
Thanks for the videos, I´m amazed. Just a question, when I try to change the category of the mass in-place, I get a warning "Changing to or from the Mass category is prohibited". How could you done it? Thanks :D
Thanks! You need to start with a generic model category or something OTHER than a mass!
@@TheRevitKid Thank so much. It was so useful :D
I have a question as a beginner. Are the foundations enough to carry the loads(live and dead) or can they withstand natural calamities? No hate please. Just asking.
Great video. Thanks!
Hello i'm an interior architect and wanted to know where did you find the tone sketch book
Amazon!! >> amzn.to/3q3CmXa
Hey Jeff, I've come from the future in 2021 to say you look younger in the future. How come is that possible? hehe
Great tutorial very helpful
Revit+sketchup+lumion=effective workflow
Kefteris no sketchup here .... not sure where you got that idea ??
@@TheRevitKid it's my workflow, for furniture i avoid revit due to it's time consuming family editor and i take advantage of the vast 3dwarehouse. Lumion combines models from revit and sketchup.
Amazin how to teach! can you share some exterior effects Lumion 10 pro
?
please let me know
Really great video, I enjoyed seeing your process. I'm always looking out for a better collection of pens to use, would you mind sharing the type and brand of pens you use for your sketching?
Hey! Thank you! I talk about most of the pens I use in the blog post related to this video: therevitkid.blogspot.com/2019/08/revit-design-process-making-of-stilted.html
great video
My job at the moment is modeling Industrial buildings for production with Tekla but in the future i also want to make renderings for architects or other contractors. Ive started to learn revit by remodeling my own house in the program. Video's like this are a great help to get me to the next level. For now im making my renderings within revit but i guess its not powerfull enough to make realistic renderings? Do you also maybe have some tricks or tips on stuff i can study on designing or modeling residential buildings? Ill for sure be checking out the rest of your video's!
If you're only able to export a single material white render, you can paint materials over in photoshop. Arqui9 visualisation is a good TH-cam channel for post processing rendering techniques
@@henryglennon3864 you can render pretty decent with revit it just misses those special effects to bring them to the next level
Great work..
Amazing
hello, how about the structure you used, did you calculate approximately how big the poles need to be ? and what material you are gonna use for a good solid strucure ?
Hey Riad, at this early stage I have not calculated the column sizes yet but they are being shown as 4" round steel tubes... I would imagine this would be enough... Once the project progresses beyond schematic those calculations will be done.
can you please send the link for lumion, so I can download it.
Just subscribed. This is nice. Am starting to learn Revit..any suggestions?
Cheers!
Cheers! I have over 1200 posts on my blog form the last 10 years with lots of tips and tricks (www.TheRevitKid.com). Definitely check out some TH-cam videos and Lynda.com as well. The one tip I will give you is you take a building (one of your favorite buildings or something you can find plans, sections, elevations, and photos of) and force yourself to model it in Revit. Its one of those programs you have to dive in and just break stuff..... Good luck!
You should try Twinmotion 2022
Check out my channel … ;) >> th-cam.com/video/uWSNpIpFnNc/w-d-xo.html
Anyone knows where i can download familys ? I’ve been looking everywhere , and can’t find a good web , would appreciate if someone has a good source
revitcity
what kind of family's do you need? there are quite a few manufacturer familys on bimobject.com, other then that i dont know any other major international websites for family's
the roof element in step 3 is a mass? or a component modeled in place?
do you think that someone without an architecture degree or college but expert in Revit with good design sense and competence can make a career designing houses? thanks
Not sure what you are asking.... It would be kind of hard to make a career out of something you haven't learned how to do (either through schooling or general experience)... Revit is just the tool here.
Excellent thank you, you should take at look at Twinmotion (its free for now) as it would be nice to hear your thoughts.
Yeah I used it a long time ago but haven’t checked it out since. The 2020 version has quite a few features I’m interested in trying out !!!
@@TheRevitKid the 2020 version will not be free as is the 2019 version, so while its free why not take advantage.
@@akawinterstorm7997 Yeah I know... I have 2019.. I wanted to test and review 2020. Seems silly to take the time reviewing something that is set to release a new version any day.
@@TheRevitKid Fair point i shall look forwards to your review of 2020.
revit isnt letting me convert any of the massing into walls, anyone have an idea on how to do that?
Why Lumion over Enscape and FormIt for the step 2 model massing?
Great video. Very interesting to see how the Revit infidel works in the schematic design process, without the help of holy mother ArchiCAD.
perfecto
sometimes my masses don't cut correctly in plan, not sure why that happens
In revit, is it a good idea to model everything out with mass at first?
Nicholas Lim not at all
doesn't have sufficient space. Thanks!
this is kind of silly