Pure insanity ... Im sure we will see a lot of logo reveals in the near future from the Ae community in guise of these amazing presets... Amazing work!!!
beautiful !! very inspiring tool and very well and friendly explained. Thanks a lot!. The tool is amazing and really it is what anybody dreams of after spending nights animating workarounds for this growing fill or write on effect. I am still longing to the next step, this will be the ultimate: to write on without spilling to the sides when "crossing a line that will be drawn on later.... like the handwritten "l" or any other spline... well this is "fill" of borders as you explaned. You guys might have what it takes to develope that. :) Thanks anyway
This plugin is so amazing! This is a question and request, is it possible to give each fill point a key at a different time to start the fill? It would be great if it could be done! In any case, this plugin is very good. Thank you so much for developing this!
When I apply the noise effect when the letters are revealed it stutters and jumps forward and back like there's some weird frame rate issue or something :/
If you should wonder why your speedmap doesn't work: make sure to set the resolution to full otherwise you won't see the desired result. I just tried to figure out why I'm not getting the results I want for half an hour. :)
Thanks for this. However the start point needs to be on the path and not outside it right? but in that case on frame 1 there is always some reveal visible. Anyway to start from complete 0 visibility or one needs to animate the layer opacity?
@@omarrocha8663 I've reduced border strength..but now it just reveals the text in the same way expanding a circular mask would....doesn't look that great
So feeling like a bit of an imposter here haha, but trying to have the fill have hard edge to it. Seems like no matter what I do it has a bump/smoothness to it. Like animating the letter S, I want to have the hard line of the ends of the S not the curve fill of the edges of the s. Any solution to this. Tried radial wipes and derping as it starts to animate the bottom half and trying to compensate with another comp and alpha layers but feel like im over complicating this simple animation haha. Also tried manual masks but very choppy fill, would love to have the speed/motion of autofill but a hard edge.line as it follows the path. I personally love the autofill, but clients obviously gotta find the one thing that is hard mode when it shouldn't be.....would be sweet to have a toggle in the plugin that makes the edge hard?
Is there an easy way to align the pre-comp 'Edit Speed Map' with the layer you want it to be applied to? I found that the pre-comp was misaligned with the layer I wanted to apply it to when I created it.
im considering buying this script, but, can i use it to footage layer? im creating Michael Jackson Black or White Morphing faces...i think i can use this preset
Please see our FAQ on registering your plugins: aescripts.com/knowledgebase/index/view/faq/how-to-register-plugins/ If you are still experiencing difficulty, please open a support ticket and send screenshots so that we can troubleshoot further: aescripts.com/contact/
Your enthusiasm for what can be done with AutoFill is infectious. Very, very cool tool with many possibilities.
Pure insanity ... Im sure we will see a lot of logo reveals in the near future from the Ae community in guise of these amazing presets... Amazing work!!!
В начале долго думал русский ли - лишком много «зе») А потом увидел букву «ф» в консоли. Отличный плагин!
Ну клёво что думал, а не типа сразу спалил с потрохами)
@@triton2030 с потрохами выдала "алЬфа")). Они там говорят "алфа".
Great overview. Could listen to this guy all day!
This is very useful and it can do anything what it looks like a Brush.
this tool really helped me for icon animation
the amount of years I've spent moving masks around omg
Тоже подумал, что наш чел)) особенно по его манере произносить четко))
You're bonkers - it's brilliant!
beautiful !! very inspiring tool and very well and friendly explained. Thanks a lot!. The tool is amazing and really it is what anybody dreams of after spending nights animating workarounds for this growing fill or write on effect. I am still longing to the next step, this will be the ultimate: to write on without spilling to the sides when "crossing a line that will be drawn on later.... like the handwritten "l" or any other spline... well this is "fill" of borders as you explaned. You guys might have what it takes to develope that. :) Thanks anyway
Beautiness, indeed! Awesome tool. Thank you!
Really a game changer..Insane
Ф, зыс, алЬфа, самсынь. Наш Чел!
выдал себя по полной, набрав букву "Ф" (3.34 сек) при быстром наборе эффекта
это Жангир из КЗ)) красссаучиг бро
Excellent!!!
This plugin is so amazing!
This is a question and request, is it possible to give each fill point a key at a different time to start the fill?
It would be great if it could be done!
In any case, this plugin is very good. Thank you so much for developing this!
Please go here for assistance: aescripts.com/contact/
Straight up beautiness.
It's cool, but what about 16 bit depth support? ;)
Скриптонит делает скрипты для Афтер Эффектс, респект бро!
Great tutorial ❤️ thanks !!
Great tool
Thank you@@@ Good Tutorial
Amazing
Nice Watch!
Looks like a pretty big game changer to me
When I apply the noise effect when the letters are revealed it stutters and jumps forward and back like there's some weird frame rate issue or something :/
Please go here for assistance: aescripts.com/contact/
Thank you
If you should wonder why your speedmap doesn't work: make sure to set the resolution to full otherwise you won't see the desired result. I just tried to figure out why I'm not getting the results I want for half an hour. :)
thank GODDDDDDDDDDDDDDDDDDD
Thank you so much for this. I was literally having problems with the effect not going all the way through my text
OOOOOOOOOOO MYYYY GODDDDD 2days 2F***** Days. you saved my life!!!!!!!!!!!!!!!!!!!
Добрый вечер. Я приобрел плагин AutoFill. Скажите пожалуйста где можно увидеть на ютубе инструкцию на русском языке.
С Уважением Олег,
Thanks for this. However the start point needs to be on the path and not outside it right? but in that case on frame 1 there is always some reveal visible. Anyway to start from complete 0 visibility or one needs to animate the layer opacity?
Please go here for assistance: aescripts.com/contact/
Fantastic!
Great Video... Thanks
Аскар Акаев в молодости!)))
May I know the name of the Effect searching plug in which was used in this tutorial frequently?
Офигительный плагин, моё почтение!
Set speed to 0? Would like to pause the effect in some manner.
I apply the effect but only reveals the first letter of the word. What happend?
Reduce the Border Strength to extend the area or add another points
Check at Min 7:30
@@omarrocha8663 I've reduced border strength..but now it just reveals the text in the same way expanding a circular mask would....doesn't look that great
мало кто знает, но он создатель этого плагина)) Большое спасибо тебе! ( и да, он Русский))
So feeling like a bit of an imposter here haha, but trying to have the fill have hard edge to it. Seems like no matter what I do it has a bump/smoothness to it. Like animating the letter S, I want to have the hard line of the ends of the S not the curve fill of the edges of the s. Any solution to this. Tried radial wipes and derping as it starts to animate the bottom half and trying to compensate with another comp and alpha layers but feel like im over complicating this simple animation haha. Also tried manual masks but very choppy fill, would love to have the speed/motion of autofill but a hard edge.line as it follows the path.
I personally love the autofill, but clients obviously gotta find the one thing that is hard mode when it shouldn't be.....would be sweet to have a toggle in the plugin that makes the edge hard?
Please go here for assistance: aescripts.com/contact/
Curious about this too. Did you ever figure this out?
рашн детекдет! крутой плагин, надо прикупить
Ага, а прям моментально мой акцент палится?)
@@triton2030 и акцент(местами) и русская раскладка промелькнула)))). Но это не уровень "индуса из саппорта", так что всё ок.
Я бы сказал казах детектед 😂
What's your accent? It's nice.
At the zeroth frame there is still some of the logo visible, how can I get rid of that(start with zero).
Please go here for assistance: aescripts.com/contact/
cool
How can we pause the animation and then resume it? Do we have to pre-comp it and tweak the timing manually? Thanks
Please go here for assistance: aescripts.com/contact/
I bought autofill, where can I see the template for cyber?
Please go here for assistance: aescripts.com/contact/
is the edit speed map suposed to be generated automatically or do you make it by yourself ??
How to stop those crossing lines interfering the animation?
Please go here for assistance: aescripts.com/contact/
Could you please tell me the name of the last song please? 13:43
Either this is alien tech. or its sorcery. No one can convince me otherwise....
for some reason the border strength is not working with a logo I have...
Please go here for assistance: aescripts.com/contact/
Is there an easy way to align the pre-comp 'Edit Speed Map' with the layer you want it to be applied to? I found that the pre-comp was misaligned with the layer I wanted to apply it to when I created it.
Please go here for assistance: aescripts.com/contact/
i am trying to render using media encoder, but its painfully slow
Please go here for assistance: aescripts.com/contact/
Which Font is this
почему после рендера автофилл не работает (нет анимации автофилла) - после рендеринга просто шейп появляется вообще без никакого эффекта
Please go here for assistance: aescripts.com/contact/
Anyone know if you can apply deep glow to the autofill?
yes of course!
im considering buying this script, but, can i use it to footage layer? im creating Michael Jackson Black or White Morphing faces...i think i can use this preset
Please go here for assistance: aescripts.com/contact/
When I apply autofill, it doesn't work.
Please go here for assistance: aescripts.com/contact/
Does anyone get those two line crossing in front of the image when applying autofill? I cannot get rid of them.
Please see our FAQ on registering your plugins: aescripts.com/knowledgebase/index/view/faq/how-to-register-plugins/
If you are still experiencing difficulty, please open a support ticket and send screenshots so that we can troubleshoot further: aescripts.com/contact/
LoL it happens. Maybe you should try registering it first and if that persist, contact support.
😂
you must register it first
It's not working properly. It doesn't fill it all. Something always goes blank.
Please go here for assistance: aescripts.com/contact/
@@aescripts Border Strenght doesn't work and not fill everyting. 7:47
Why don’t render?
Sorcery!!
красавчик
Any idea why the autofill is stuttering?
on the presets?
Please go here for assistance: aescripts.com/contact/
Try pressing the "Resimulate" button. It takes care of that stuttering.
Is it paid or free?
Фенк ю фо зэ лессен)
русскоязычный, наверно из Казахстана или Киргизии.
Ф? Вот ты и спалился казах-кыргыз)))😂