Thanks for watching ! Please support this channel by clicking the Like, Subscribe, and SUPER THANKS buttons. Your support will help me to continue and improve my videos 👍
My mother drives this car and had the same problem! I followed your video exactly. And it actually worked straight away! I thank you so much! Who knows how long it would have taken a mechanic to find this problem. Saved nerves and money, thanks to you!👍👍
Why have I only just found your youtube channel? I have been hornless for 4 years with this car - I have a month off work and loads of stuff to do to the car now, thanks to you! Magic.
Habe gleiches Problem bis heute, aber toleranten TÜV Prüfer...."Die Hupe sollte man einmal überprüfen! " ...aber immer Plakette erhalten. Hatte nie Ahnung, wie ich das Problem lösen könnte. Danke für dieses ausführliche Video!
Thank you so much for the Amazing tutorial! The mechanic I went to said the problem was probably a broken spiral or something like that and it would cost like 800€ for the spare part and the work needed. Watched your video and followed the instructions and now my horn works again! And it it was completely free! Such a simple fix and it took almost no time at all.
Epic! Had a dry few hours this afternoon and followed this advice, and what do you know... I have a horn again!! The white airbag wires were little tighter than in your video, so I basically used masking tape to tape the airbag to the upper wheel to give me hands free access to the wire and connection. Worked a treat. Horn now working after 4 years! Not once has it been tested on an MOT... so I consider myself lucky! Thank you, you're an absolute star! 2003 307 SW 110 HDI.
Shout-out to this tutorial, this is marvelous! I didn't had horn for 2 years, mechanics don't want to deal with this because they can't charge this, it's a small thing but you are my savior, thanks to the moon and back!
This video saved my days and my ass everytime I needed to blow the horn. A tip for whoever struggles with reaching to the (-) pole of the battery: I fixed this problem with a friend of mine who is an electrician, he suggested to remove the (+) pole (because it was easier to reach) and it worked real good. Only thing to notice is the reset of date and time on the screen, all the other infos are saved. Thanks a lot for the community service, really saving our pockets' weights!
(-) pole is also more complicated for my car, because it doesn't have a clamp like (+) does. I'm not sure if it is the same which one you remove, especialy because the video says it's the earth wire connector? I mean, it should be the same, but I don't know.
Thank you, great video, very well presented. I have a 2009 Berlingo with this problem, I have to hit the horn area hard a few times to get the horn to start working. It will work after that for a day or so then stop working again. I've been wanting to take off the steering cover to take a look at what is going on but I have been apprehensive about the air bag. I will give this a go using your instructions, hopefully it will go straight forward. Further note, I had a garage try to fix this a few years back, and they replaced the squib stating it was faulty, but the problem remained. A couple hundred quid down the drain using the garage.
A careless mechanic cut the white wire for the airbag, the horn stopped working and another claimed it's because of that. Thanks to this video, now I know which is actually connected to the horn and airbag
This fix worked for me. The bit was getting the centre/horn button bit off. I found putting it back in reverse order helped, ie side clips first then bottom clip last
Brilliant video, I’ve just bought a 307sw and the horn wasn’t working (had a fresh MOT!!!), n/s wheel arch liner was loose so someone had obviously checked the horn and fuse box then given up. Took me 10 minutes after watching your video to fix it, would never have known this was the problem.👍
Thanks for the video. Had the same issue with a 206. Checked the fuse ,took out the horn and put 12v on it direct and it was working . I saw your video and it was a similar issue . I cleaned up a spade connector under the airbag and squeezed it a bit with a pliers . Job done . For anyone doing it on a 206 there's one clip to be pushed directly under the steering wheel.
Worked a treat for me this thank you! That said, the copper connector needed sanding but the wire for me was snapped off it! Thankfully, soldering the wire to the connector worked 👌
The garage servicing my 2003 Pug Partner couldn't fix the horn for it's MOT. Nervously followed your video. (Cleaned up the contact instead of screwing it in). Horn works. Cheers! 👍
No annoying background music was nice, but, the silence made it seem like the airbag was gonna go off any moment and it was just building up the suspense the entire video monkaS
Worked like a charm. Cant believe I was hornless for years due simple contact issue... Good thing I did not listen to advice from service when the issue first came up, to replace com2000.
Ça marche 👌 ça fait des années que je me passais de mon Klaxon ... je vous laisse imaginer la frustration dans certaines situations 😬😅 alors que la manip est toute simple pour résoudre ce problème ! Merci 🙏
Muchas gracias por este video, ya estaba desesperado por que no funcionaba, y en el taller me ubiese costado una pasta, lo hice tal cual el video y funciona como el primer día. Gran trabajo!
Thanks for your informative video, very well done and informative. Actually on my part I have the inverse problem. The horn works randomly without me touching it, especially when I turn the wheel. A few times I almost had problems with the drivers around me, I'm so afraid it happens while I'm driving behind or next to a police car. Do you think that I could use the same technique on my horn. Thanks in advance
You're welcome. I don't think it's the same issue. It sounds like there could be a short circuit in the wiring somewhere or a faulty relay. If it stays on constantly, you may need to remove the horn fuse temporarily until you fix the issue. You can find the fuses on this link: fuse-box.info/peugeot/peugeot-307-2002-2008-fuses
Thanks for the video! I did it according to you and it only helped when I put the airback back in and plugged in the battery so I was driving a click in the steering wheel whenever I passed the center of the steering wheel, don't you know what it could be?
Hello my brother. Please why i should reconnect the battery with door driver open and switch on the ignition outside the car please. I have this problem in my car. And im scary
Just for your info some Peugeots have 2 torx srcews behind the steering wheel accessible through the small holes, no clamp in there!!! Looks to me that all with the horn function in the handle have those trorx screws holding the airbag in the steering-wheel . In fact those wheels look similar to this one, but the top of the airbag/steering-wheel is different. the airbag module (cover) bends over the steering-weel top in this model but those whit the screws have a foam like rubber that is part of the steering-wheel and a more flat airbag module, also minor wiring differences. My model has only 1 connector (orange) going from the spring clock behind the steering wheel towards the airbag module and no wires for the horn of course. You can damage this connector/wiring while poking in these holes trying to find the clamp!
Fixed ! , it was a bit hard to remove the connector , my 307sw is second hand and the connector had a screw insert it !, probably the last owner or his mechanic put it in there ! ... anyhow now is working , thanks
It was working this morning. I go to work. When I was on my way home. I tried to salut my friend with my horn and it was not working anymore. I dont understand. Where I live a working horn is a must. Our state does not let cars into traffic if their horn is not working. So is it possible you can upload a 206 horn tutorial as well. Cuz I suck at repairing things. But I m sure a video should do more than enough.
It's a lot of work. You have to take off the lower center part of the front fascia and then remove the center console, which involves disconnecting a passenger airbag sensor. To be honest, it would be easier to quit smoking ! :)
@@screwsnutsandbolts Actually I admit I watched it 3 times, I'm a bit slow like that but hey I did it, after cleaning I added a piece of wood jammed in between the spade clip to force its sides outward, now i have a very strong contact. Thank You I couldn't have done it without you.
It's hard to say. I'm not sure if the earth wire is the same as the 307. Did you already check the horn fuse ?. You can find the fuse diagrams here: fuse-box.info/peugeot/peugeot-partner-2008-2018-fuses
When the connection is bad, you hear a clicking sound of the horn relay or none at all? My 307 is without horn sound but I suspect it might be something else, as the relay makes a sound indicates that the button pressing seems to be working. Thanks!
Thanks, really clear explanation. I have a Berlingo 2008, and the horn doesn't work. I'm just a bit nervous to touch the Airbag. Is it safe to work around it if I unplug the battery?
It should be safe but be very careful. Make sure nothing electrical gets anywhere near the airbag contacts when you unplug them. This is from the 1996-2005 Haynes Berlingo Manual so I don't know if it's the exact same with the 2008 model : a) Switch on the igniton and check the operation of the airbag warning light on the instrument panel. The light should illuminate when the ignition is switched and then extinguish. b) Switch off the ignition. c) Remove the ignition key. d) Switch off all electrical equipment. e) Disconnect the battery negative terminal f) Insulate the battery negative terminal and the end of the battery negative lead to prevent any possibility of contact. g) Wait for at least two minutes before carrying out any further work. Wait at least ten mlnutes if the airbag waring light did not operate correctly. Good luck 👍
@@screwsnutsandbolts wow, you are a star. What's the d) Switch off all electrical equipments? Is this i.e. Enything connected to the cigarette lighter or similar? If you disconnect the battery there shouldn't be any other source of electricity in the car? Am I wrong?
@@ps-3dforgingyouridea711 Probably switch off lights, wipers etc. before disconnecting the battery. I not exactly sure why but better safe than sorry :)
@@ps-3dforgingyouridea711 By the way, This is is what it says about the re-activation of airbag system. To activate the system on completion of any work, proceed as follows: a) Ensure that there are no occupants in the vehicle and that there are no Ioose objects around the vicinity of the steering wheel. Close the vehicle doors and windows. b) Ensure that the ignition is switched off then reconnect the battery negative terminal. c) Open the drivers door and switch on the ignition without reaching in front of the steering wheel. Check that the airbag warning light illuminates briefly and then extinguishes . d) Switch off the ignition. e) If the airbag warning light does not operate as described, consuIt a Peugeot/Citroen dealer before driving the vehicle.
@@screwsnutsandbolts f) if the airbag warning light does not operate has described..... BANG too late..... Thanks mate, really appreciate your help. I will give a go as soon as I have time. Thanks again, Best Steve
Lepo pojasnjeno detaljno svaka cast. Inace ne radi mi sirena na xsari vtr godinu dana i jace ! Kupio sam cak i novu sirenu probao opet nista. Proverio kablove da nije neki u prekidu slucajno medjutim sve je tu ok samo truba ne trubi. Moracu da otvaram volan sad nzm.ako iskljucim akumulator smem da ceprkam ili? Pozdrav iz Srbije Beograda
@@monique380 If you're positive that they are not working then you don't have to wait but I would disconnect the battery and wait a couple of minutes anyway as a precaution.
hello, first of all, thanks for the video, my car is citroen xsara, the horn works in the off position, but it does not work in the open position, I would appreciate it if you could help me.
Thanks for watching !
Please support this channel by clicking the Like, Subscribe, and SUPER THANKS buttons.
Your support will help me to continue and improve my videos 👍
My mother drives this car and had the same problem! I followed your video exactly. And it actually worked straight away! I thank you so much! Who knows how long it would have taken a mechanic to find this problem. Saved nerves and money, thanks to you!👍👍
You're very welcome, thanks for watching !
@@screwsnutsandbolts greetings from Germany! 🤝
So far better than all our french video for this ptoblem on this french car 😂👍🫶👏
Sorry if my english is bad, i don't use the translate.
Why have I only just found your youtube channel? I have been hornless for 4 years with this car - I have a month off work and loads of stuff to do to the car now, thanks to you! Magic.
Thank you :)
How have you managed to get through 4 years worth of MOT tests without the horn working?
@@snoopy10411You only need to put a little money on top of the standard price of MOT testing and they will stamp your MOT no problem :D
@@Bossix84depends who you know I guess 😂
Nice informative tutorial with no aggressive background music. Thanks!
You're very welcome. Thanks for watching ! :)
Habe gleiches Problem bis heute, aber toleranten TÜV Prüfer...."Die Hupe sollte man einmal überprüfen! " ...aber immer Plakette erhalten. Hatte nie Ahnung, wie ich das Problem lösen könnte. Danke für dieses ausführliche Video!
Thank you so much for the Amazing tutorial! The mechanic I went to said the problem was probably a broken spiral or something like that and it would cost like 800€ for the spare part and the work needed. Watched your video and followed the instructions and now my horn works again! And it it was completely free! Such a simple fix and it took almost no time at all.
You're very welcome, thanks for watching !
Epic! Had a dry few hours this afternoon and followed this advice, and what do you know... I have a horn again!! The white airbag wires were little tighter than in your video, so I basically used masking tape to tape the airbag to the upper wheel to give me hands free access to the wire and connection. Worked a treat. Horn now working after 4 years! Not once has it been tested on an MOT... so I consider myself lucky! Thank you, you're an absolute star! 2003 307 SW 110 HDI.
You're very welcome ! :)
Shout-out to this tutorial, this is marvelous! I didn't had horn for 2 years, mechanics don't want to deal with this because they can't charge this, it's a small thing but you are my savior, thanks to the moon and back!
You're very welcome, thanks for watching !
This video saved my days and my ass everytime I needed to blow the horn. A tip for whoever struggles with reaching to the (-) pole of the battery: I fixed this problem with a friend of mine who is an electrician, he suggested to remove the (+) pole (because it was easier to reach) and it worked real good. Only thing to notice is the reset of date and time on the screen, all the other infos are saved.
Thanks a lot for the community service, really saving our pockets' weights!
(-) pole is also more complicated for my car, because it doesn't have a clamp like (+) does. I'm not sure if it is the same which one you remove, especialy because the video says it's the earth wire connector? I mean, it should be the same, but I don't know.
Awesome !!!!! electrician asked me 70 euros to fix the horn. Done in 5 minutes . Many thanks.
You're very welcome, thanks for watching !
Thank you, great video, very well presented. I have a 2009 Berlingo with this problem, I have to hit the horn area hard a few times to get the horn to start working. It will work after that for a day or so then stop working again. I've been wanting to take off the steering cover to take a look at what is going on but I have been apprehensive about the air bag. I will give this a go using your instructions, hopefully it will go straight forward. Further note, I had a garage try to fix this a few years back, and they replaced the squib stating it was faulty, but the problem remained. A couple hundred quid down the drain using the garage.
A careless mechanic cut the white wire for the airbag, the horn stopped working and another claimed it's because of that. Thanks to this video, now I know which is actually connected to the horn and airbag
Thanks for watching :)
This fix worked for me. The bit was getting the centre/horn button bit off. I found putting it back in reverse order helped, ie side clips first then bottom clip last
20 years without horn. Problem solved in 5 minutes! Thank you very much
You're welcome!
Brilliant video, I’ve just bought a 307sw and the horn wasn’t working (had a fresh MOT!!!), n/s wheel arch liner was loose so someone had obviously checked the horn and fuse box then given up. Took me 10 minutes after watching your video to fix it, would never have known this was the problem.👍
You're very welcome, thanks for watching !
Ser gut hat bei meinem Wagen geklappt 😅 10 schterne für den Tipp vielen Dank
You're welcome, thanks for watching !
Thanks for the video. Had the same issue with a 206. Checked the fuse ,took out the horn and put 12v on it direct and it was working . I saw your video and it was a similar issue . I cleaned up a spade connector under the airbag and squeezed it a bit with a pliers . Job done . For anyone doing it on a 206 there's one clip to be pushed directly under the steering wheel.
You're welcome, thanks for watching :)
Thanks good to know ..looks like I'll be having to do this on my 206
Worked a treat for me this thank you! That said, the copper connector needed sanding but the wire for me was snapped off it! Thankfully, soldering the wire to the connector worked 👌
Well done 👍
The perfect instructional video. You’ve earned a subscription.
Thank you ! 👍
The garage servicing my 2003 Pug Partner couldn't fix the horn for it's MOT. Nervously followed your video. (Cleaned up the contact instead of screwing it in). Horn works. Cheers! 👍
You're very welcome, glad you got it sorted 👍
Thanks a lot dude. I was four years without a horn. Super easy and fast fix on my 307. God bless you 😃😄😄👍👍👍
You're very welcome, thanks for watching !
Thanks to this video I fixed my car horn without paying a mechanic!! Thank you sir!!
You're welcome, thanks for watching :)
No annoying background music was nice, but, the silence made it seem like the airbag was gonna go off any moment and it was just building up the suspense the entire video
monkaS
Worked like a charm.
Cant believe I was hornless for years due simple contact issue...
Good thing I did not listen to advice from service when the issue first came up, to replace com2000.
Thanks for watching ! :)
@@screwsnutsandbolts No, no, thank you for sharing the knowledge. Saving $$$ on maintenance is always nice ;)
Dziś zrobiłem tak jak w przedstawionym filmie i klakson działa 💪👍
Very good 👍
Very interesting tuto: clear, soothing and calm. many thanks in all languages of the world
You're very welcome, thanks for watching !
Ça marche 👌 ça fait des années que je me passais de mon Klaxon ... je vous laisse imaginer la frustration dans certaines situations 😬😅 alors que la manip est toute simple pour résoudre ce problème ! Merci 🙏
You're very welcome, thanks for watching ! :)
Great video, thank you !
You're welcome, thanks for watching !
Muchas gracias por este video, ya estaba desesperado por que no funcionaba, y en el taller me ubiese costado una pasta, lo hice tal cual el video y funciona como el primer día.
Gran trabajo!
You are very welcome. Thank you for watching !
Big up from Scotland and Will it work?on Citroën berlingo multispace 2010 😊
Thanks, I haven't worked on one so I can't be sure, sorry :)
Thanks a lot for this video... Had the same Problem on my 307 SW... Followed the steps shown here and its working again.
Thanks again.
You're welcome, thanks for watching ! :)
Tausenmal Dankeschön Habe es genauso gemacht und es hat sehr gutfunktioniert. Ich fahre auch dieselbe Auto.Danke nochmals.
You're welcome !. Thanks for watching !
esta bien esplicado para llegar a desmontar,ok
Thank you !
Thanks for your informative video, very well done and informative.
Actually on my part I have the inverse problem. The horn works randomly without me touching it, especially when I turn the wheel.
A few times I almost had problems with the drivers around me, I'm so afraid it happens while I'm driving behind or next to a police car.
Do you think that I could use the same technique on my horn.
Thanks in advance
You're welcome. I don't think it's the same issue. It sounds like there could be a short circuit in the wiring somewhere or a faulty relay. If it stays on constantly, you may need to remove the horn fuse temporarily until you fix the issue. You can find the fuses on this link: fuse-box.info/peugeot/peugeot-307-2002-2008-fuses
Thanks for the video! I did it according to you and it only helped when I put the airback back in and plugged in the battery so I was driving a click in the steering wheel whenever I passed the center of the steering wheel, don't you know what it could be?
You're welcome. It sounds like the sound could be coming from the clock spring: th-cam.com/video/KaaJrfeV918/w-d-xo.html
Very Big thanks from France and Algéria, 👍👍👍
You're very welcome !
A very good video. Very clear and easy to follow. Thanks man.
You're welcome, thanks for watching !
Thank you, you advice fixed my horn problem, May God Bless you
You're very welcome, thank you
Hello my brother. Please why i should reconnect the battery with door driver open and switch on the ignition outside the car please. I have this problem in my car. And im scary
It's just a precaution, in case the airbag deploys when the power is reconnected.
Thank you. The video above worked on my citroen berlingo. 👍
Excellent !. Thanks for watching 👍
Thank you very much. Watched your video and gathered some strengt to try fix kt myself, works like charm
Excellent, well done !
@@screwsnutsandbolts do you have some video/instructions for fan/blower? Just stoped working, like he didnt have strengt to work.. automatic climate
@@Bodika. I don't, sorry about that.
worked for me on 307 sw 2003 diddnt see anything wrong stil try it and it worked from nothing to working completley thanks for the vid
You're welcome ! 👍
Thanks. Apart from slightly different removal of the airbag, this was useful to fix the issue on my 2008 berlingo. Cheers 👍
Thanks for watching :)
Hi Toy, I have a Berlingo 2008 too. Was it difficult to do it? Any issue with the Airbag? I am freaking out it will explode....
Thinking of having a go at my 2007 Berlingo so good to hear it's a winner
it was so much easier than i thought it would be. Thank you for the great video. Followed instructions and it worked!
You're very welcome, thanks for watching !
Spot on this, all done, horn working, very happy. Thanks
You're very welcome, thanks for watching !
Very informative. Thank you very much! Informative warnings help me lowering unsure feelings. 👏👍😄
Thanks for watching !
Tanks for this vidéo ! My Horn is OK now !
You're welcome !
Your video save my Life broo thank you very much good blees you 🙌
Thanks for watching !
Comprei uma recente é seu vídeo foi o melhor que encontrei, muito obrigado já sou seu escrito!
Thanks for watching !
@@screwsnutsandbolts olhei aqui amigo, porém o meu é uma partner 2010 você tem algum vídeo explicando?
Tack mannen du är bäst 🇸🇪 jag 🦧
Thanks for watching !
Thx very very much bro.
It's 👌
Really good tuto👍😉
You're very welcome, thanks for watching !
Muy bueno gracias por el video, lo voy a hacer ahora. Por favor put some oil in the crankcase!!
Thanks !. The oil level is good but the oil level sensor is faulty. Sometimes it works and sometimes it doesn't :)
is this similar on a 2004 Peugeot 406? or is there a big difference from the 307?
I haven't worked on a 406 so I can't be sure, sorry.
Muchas gracias amigo solucione mi problema de bocina
You're very welcome 👍
Demostacion rapida,efectiva y eficas.gracias por compartir
You're very welcome, thanks for watching !
Just for your info some Peugeots have 2 torx srcews behind the steering wheel accessible through the small holes, no clamp in there!!! Looks to me that all with the horn function in the handle have those trorx screws holding the airbag in the steering-wheel . In fact those wheels look similar to this one, but the top of the airbag/steering-wheel is different. the airbag module (cover) bends over the steering-weel top in this model but those whit the screws have a foam like rubber that is part of the steering-wheel and a more flat airbag module, also minor wiring differences. My model has only 1 connector (orange) going from the spring clock behind the steering wheel towards the airbag module and no wires for the horn of course. You can damage this connector/wiring while poking in these holes trying to find the clamp!
Thanks for the info. I did state in the description that this fix is for the 2001-2008 peugeot 307 model only
Thanks
Same think for peugeot 208 ???
No it's probably different in a 208
My car horn a 208 sometimes work sometimes not.
I don't know what to do to fix it
There is no earth wire in 208 horn
I thank you so much Mr. Your explication is very good
You're welcome, thanks for watching !
ياأخي بارك الله فيك هذي مدا ونا نحاول كيفاه نفتحا
Fixed ! , it was a bit hard to remove the connector , my 307sw is second hand and the connector had a screw insert it !, probably the last owner or his mechanic put it in there ! ... anyhow now is working , thanks
You're welcome, thanks for watching !
Funcionó gracias,thanks!
You're welcome, thanks for watching !
If I try same solution for Peugeot 206 will it work?
The earth wire is different on the 206 so I'm not sure
It was working this morning. I go to work. When I was on my way home. I tried to salut my friend with my horn and it was not working anymore. I dont understand. Where I live a working horn is a must. Our state does not let cars into traffic if their horn is not working. So is it possible you can upload a 206 horn tutorial as well. Cuz I suck at repairing things. But I m sure a video should do more than enough.
@@sefadursun2463 I don't have the 206 any more, sorry
Okey, thanks anyway. :)
@@sefadursun2463 You're welcome. Good luck !
60 yeara worhout horn! Fixed in 6 seconds. Thank you!
Merci beaucoup pour cette vidéo grâce à vous mon klaxon fonctionne de nouveau 👍🙂.
You're welcome, thanks for watching ! 👍
Top marks, one excellent video
Thank you !
Thank you so much .
Can you show us how to change the cigaret ligther ???
It's a lot of work. You have to take off the lower center part of the front fascia and then remove the center console, which involves disconnecting a passenger airbag sensor. To be honest, it would be easier to quit smoking ! :)
@@screwsnutsandbolts thanks you
Very well explained,especially the safety aspect.I think the fault is probably common to other makes of cars too.Thanks for sharing.M
Thanks. Yeah I wouldn't be surprised. It's a strange way to connect it !
Thank you very much man for video ❤😊
You're welcome !
Good 👍
Thanks !
My 107 horn keeps going. Could it be the relais of the claxon or just replace steeringwheel because of the spring inside might be broken?
It sounds more like an issue where you push the horn
Superb video, Thank You for your effort to help.
You're very welcome. Thanks for watching !
@@screwsnutsandbolts Actually I admit I watched it 3 times, I'm a bit slow like that but hey I did it, after cleaning I added a piece of wood jammed in between the spade clip to force its sides outward, now i have a very strong contact.
Thank You I couldn't have done it without you.
@@themilktrayman7369 Well done ! :)
May this fix work on a peugeot partner year 2006 aswell ?
It may be different but I'm not sure as I haven't worked on a Partner, sorry
Thank you so much. Worked a treat. 😊
You're welcome !
I have a Peugeot partner 1.6 2014 van
Same problem, horn has stopped working, would it be the same thing?
It's hard to say. I'm not sure if the earth wire is the same as the 307. Did you already check the horn fuse ?. You can find the fuse diagrams here: fuse-box.info/peugeot/peugeot-partner-2008-2018-fuses
Great stuff mine is now working a treat , thanks 😊
You're very welcome, glad it helped ! :)
worked for me! 🙂
Thanks for watching !
When the connection is bad, you hear a clicking sound of the horn relay or none at all? My 307 is without horn sound but I suspect it might be something else, as the relay makes a sound indicates that the button pressing seems to be working. Thanks!
I didn't hear anything when I pressed the horn before I fixed it
@@screwsnutsandbolts thanks for your feedback. so I guess with that my problem might be on the horn itself, not on the wheel switch. Thanks! =)
@ You're welcome, good luck !
thank you verycvery very very much 👍👍👍👍👍👍👍👍
You're very welcome, thanks for watching !
Oh thank you, a very good instruction🙏
Thanks for watching !
Thanks, really clear explanation. I have a Berlingo 2008, and the horn doesn't work. I'm just a bit nervous to touch the Airbag. Is it safe to work around it if I unplug the battery?
It should be safe but be very careful. Make sure nothing electrical gets anywhere near the airbag contacts when you unplug them. This is from the 1996-2005 Haynes Berlingo Manual so I don't know if it's the exact same with the 2008 model :
a) Switch on the igniton and check the
operation of the airbag warning light on
the instrument panel. The light should
illuminate when the ignition is switched
and then extinguish.
b) Switch off the ignition.
c) Remove the ignition key.
d) Switch off all electrical equipment.
e) Disconnect the battery negative terminal
f) Insulate the battery negative terminal and
the end of the battery negative lead to
prevent any possibility of contact.
g) Wait for at least two minutes before
carrying out any further work. Wait at least
ten mlnutes if the airbag waring light did
not operate correctly.
Good luck 👍
@@screwsnutsandbolts wow, you are a star. What's the d) Switch off all electrical equipments?
Is this i.e. Enything connected to the cigarette lighter or similar? If you disconnect the battery there shouldn't be any other source of electricity in the car? Am I wrong?
@@ps-3dforgingyouridea711 Probably switch off lights, wipers etc. before disconnecting the battery. I not exactly sure why but better safe than sorry :)
@@ps-3dforgingyouridea711 By the way, This is is what it says about the re-activation of airbag system.
To activate the system on completion of
any work, proceed as follows:
a) Ensure that there are no occupants in the vehicle and that there are no Ioose
objects around the vicinity of the steering
wheel. Close the vehicle doors and
windows.
b) Ensure that the ignition is switched off then reconnect the battery negative terminal.
c) Open the drivers door and switch on the
ignition without reaching in front of the
steering wheel. Check that the airbag
warning light illuminates briefly and then
extinguishes .
d) Switch off the ignition.
e) If the airbag warning light does not
operate as described,
consuIt a Peugeot/Citroen dealer before
driving the vehicle.
@@screwsnutsandbolts f) if the airbag warning light does not operate has described..... BANG too late.....
Thanks mate, really appreciate your help.
I will give a go as soon as I have time.
Thanks again,
Best
Steve
Thanks and its cool but i hate videos where they dont talk to ya.
Great video. Thanks for sharing
You're very welcome, thanks for watching !
So informative , thank you so much
You're very welcome !
Great job sir. 100 % working 😊.
Thanks for watching !
Thank you so much for your help
God bless you brother
You're very welcome !
Lepo pojasnjeno detaljno svaka cast. Inace ne radi mi sirena na xsari vtr godinu dana i jace ! Kupio sam cak i novu sirenu probao opet nista. Proverio kablove da nije neki u prekidu slucajno medjutim sve je tu ok samo truba ne trubi. Moracu da otvaram volan sad nzm.ako iskljucim akumulator smem da ceprkam ili? Pozdrav iz Srbije Beograda
Hi, what if the car doesnt have the airbags working? Should i Wait 30 minutes anyway?
How do you know they're not working ?, have they been deployed already ?
Yes, after a car crash
@@monique380 If you're positive that they are not working then you don't have to wait but I would disconnect the battery and wait a couple of minutes anyway as a precaution.
Tenia el mismo problema... Y funciono perfecto 👍👍👍
Thanks for watching !
Excelente.. saludos desde argentina
Thank you !
hello, first of all, thanks for the video, my car is citroen xsara, the horn works in the off position, but it does not work in the open position, I would appreciate it if you could help me.
You're welcome. I haven't come across that problem to be honest. I'm not sure why that could be happening, sorry
@@screwsnutsandbolts ok thanks
I hope this works for me
I will try it asap
Thanks bro 🙏
You're welcome !
Where to buy that brass if it gets damaged ?
I'm not sure, sorry
My p5008 is same this problems. Can i try this step?
I haven't worked on a 5008 so I can't help you there, it could be very different.
I haven't worked on a 5008 so I can't help you there, it could be very different.
Great video. Just a question : why is your Airbag light still on ? It's not supposed to stay on afaik
The airbag light was already on before I started. That was a different issue
My 3008 gt is having same issue
Can I go ahead like this
I haven't worked on a 3008 so I don't know to be honest. It could be very different to this car
bonjour je peut déconnecter le plus sur la batterie au lieux du moins?
It's important to disconnect the negative side of the battery first, otherwise you can cause an electrical short if the positive is removed first
Thank you bro , it really worked :)) made my day
You're very welcome, thanks for watching !
Tank you this vídeo hekp me to fix my 307 horn fix.
You're welcome !
Do you think this would work on a 207
I'm not sure to be honest. Depending on the year, it may be identical or very similar but I haven't worked on a 207 so I can't say for certain.
Another awesome video! Thank you! :)
Thanks for watching !