Buck and Minnie looked like they were having such a good time! The military truck is looking very cool and I have done my fair share of stacking wood… I kind of enjoyed it.. lol
Hanna you can't be a hater on the Namco. Early 80's had one and it was a work horse. It would get in tight spots like your shop. We told new hires to check the oil and coolant. haha being air cooled, we would see how long they would look for the radiator. And J-Bird your going to be the coolest girl in school!!!
You can also undo zip ties with a small flat blade screwdriver. You push it in on the actual part that clips in, you lift it up and the zip tie comes undone.
I like the way the 41 Dodge is headed . wish my wife worked with me on my projects she does not even want to come in the garage which ay be a good thing when you really think about it.
I think you should rework the front fenders and put a rolled edge on them to hide the ends of the braces. Maybe you could cut the rolled edge off the part already cut off and weld it back on the fenders. It would look like the rear fenders then if you are going to use the rolled edge on the back. Just a thought. Love your channel and thanks for taking us all along with you to North Carolina. I would have loved to have been there with you.
Brilliant one as usual, the truck is looking good. We hope your voting went your way, we are well chuffed over here..😉 Oh Cory fancy admitting your wife was right!! 🤣. Take care for now, love from us two in the UK.💖
Hannah has the strength of an Ox. That's a lot of strength. I saw her pull that zip tie apart with her bare hands. Ignore the pliers please. Military Truck gets a Salute.
You can put that rubber edging around the inside of the cutout for the shock to dress up your cut, Corey! You can also get a nibbler for cutting thin metal my friend! They work great on sheet metal!
Here in Australia apparently we have to have a wheel guard that cover's the wheel, no tyre past the fender, truck's looking great, thanks for sharing, all the best to yous and your loved ones
Candy world for fabricators, not all guys are into fabrication! I am because I’m retired from welding, fabrication and pipe fitting, Corey! I love fabrication and since I’m retired I love watching y’all and I have been waiting for the 41 Dodge! Put whatever you want in your truck, it’s your business what you want in the 41 Dodge brother! I’m just enjoying watching Corey! 👌🏻👍🏻👍🏻
Y'all build some pretty cool stuff but my favorite is the 41 I prefer a four-wheel drive over two-wheel drive low setting trucks but the other stuff y'all built are pretty cool
Hi could you not cut the piece of tubing on the rear a little more so fender would go up a little bit , you are both amazing you give me something to look forward to, sorry about the cutting comment
You should be in barriers its a Very cool i love kustoms guys i miss out on a 48 Ghevy Pick-up it had a inline six look great it would have painted it satin black with blue Flames on it or just left satin black and have the inline six Re built or put a .LS1 in it they are a great motor guy's i will keep my eyes open one more met show up 41 Ghevy not to bad looking . guy's i wish i had a great shed like you guys or i will get a ford truck i not really care guy's i would do it in satin black guys so be safe guys
Yo CWC Corey and Hannah HI again from the D Mi 😎 thanks for sharing another great video update on your progress with your projects/new Toy's especially the non-power wagon 😅😁😳🤩💞😎
Hi there theirs guys it great to see you guys again its been a Wild are you going to paint the old 40 truck your cool old truck green is nice colour guys
Cory, seeing dodge truck cab on the ground in front of the chassis (part where j-bird was standing in front of it) would look killer bagged and laying rocker
and good to see Trump get back in for a American he would be a lot better than the last one and you hope they this lot helps the poor people From the shocking floods.
I love watching you guys and how easy going you both are! My son and I have been working on a 70’ Loadstar. I’m currently looking for a donor truck. I know you guys like second GEN dodges, just wanted to pick your brain to see if a late 90s Chevrolet chassis would work also? Or does the second GEN Dodge just work better?
Cory you should definitely take some like 1/4” or 1/2” round rod and weld the round rod around the edge of of the fender so that you don’t have the sharp edge on the fender plus the round rod will definitely help make the fender much more sturdier and much more stout for sure!!! Plus it would help it look more finished and complete!!! I have done this to a square body truck that a friend didn’t have room for the bigger tires he had got for his truck and didn’t want to spend the money to put a bigger lift kit on his truck so he had me figure out something for him and I just cut his fenders out and then the fenders were more floppy until I put some round rod around where I had cut the fenders off and was actually really surprised at how much it made it more sturdy!!! Jay bird heck know that uncle Cory picked you up in the mouse trap you got something that none of your other class mates parents or uncle have like your uncle Cory does!!! You should definitely be really happy to be able to ride in the mouse trap!!! Oh one last thing Cory !! Trump all the way and so sorry Harris fans but she is definitely FIRED NOW for sure!!!! Go Trump!!!!
You might want to weld some 5/16 round rod on the edge of the front fenders. It will give them more strength and you won’t have that sharp edge that will cut you or cut into the tire if the tire happens to hit it.
Me likey this a lot..think I would bedliner the rock bar step for traction. Couldn't you cut the stake pockets halfway and move the rear fenders up...keep up the good work
Though our taste in fenders differ, I'm loving yal getting back on the military truck, and I being in Tennessee wish I had known the 60 Dodge was available and could have been my very first old truck, farm truck, or Rat truck . All the old trucks appeal to me in a huge way . I'm looking forward to meeting yal, Tim and Jennifer at an event soon . I actually feel that Tim and me are brothers from different parents with my being 60 ofcourse I would be the older brother but looking to him and you for advice as I dig the hell out of the work from both channels and am always impressed by the finished products. Hannah's 58 will forever be my favorite as Turquoise is and always has been my color of choice much like her . And my final comment this time is to say the Halloween episode is hands down my all time favorite Wheats video with more of the complete crew including little J-bird and her gorgeous mom Hayley . The only people missing from the real regular crew was mom and Jimmy from that episode. I do also enjoy the ride alongs to your dad's shop as well . Many years ago I worked in New Albany Indiana at Beech Mold and Tool where I met and got to become friends with so many truly good people while I lived way out in Waddy Kentucky until I found out my wife at the time was engaged to the most afraid fella I ever scared the life out of so bad he literally was jumping across the hoods and deck lids of vehicles parked in the motel parking lot I found them at . I never really expected better from her due to the fact she was supposedly secretly married to another fella they were not supposed to know she was married to, but I later accidentally found her wedding pictures complete with parents in the pictures and by then we had a daughter together, so what do ya do but wait things out and prepare the best you can to get out of the wasted 7 plus years of my life . I also want to extend much gratitude for everything yal and the other fine folks did for the tragic storms that ripped North Carolina and East Tennessee as well as Florida apart . I thank you all as well as your followers very much for everything you all done for those devastated!!!! I already found the kindness of Indiana people after what happened to me in my last marriage and divorce 30 years ago . I grew to love and miss the friends made there that I've since lost touch with but have never forgotten. Lastly I'd like to say hello to Hayley and little J-bird ❤ !
I have a 47 dodge panel wagon In great condition the body work and paint is already done. Original everything. And I'm not sure what to do with it. Thought about hemi in flat head 6 out. Semi wheels would be nice. Any suggestions??????
Hell yeah what a great election day it was! 🇺🇸 1ST 🇺🇸 Don't be afraid to show your patriotism! You got static over your Trump shirt quite some time ago. TRUMP2024 we did & it & it feels amazing already! Love ❤️ you guys I hope to meet you this coming summer.
I can relate to the wood stacking ! I still heat with wood. I always sit back and admire my wood pile after it’s all stacked .
Love that you take Buck and Minnie with you we take our dogs everywhere we can
Take a pc of 1/4" round and weld to fender, keep fender from cutting tire if hit fender
A well timed movie clip is always apropos!
"Well that's too bad!! You keep diggin'!" 😆
I wish my gal got excited about going to the junk yard. You're a lucky dog.
Thanks for sharing Hannah and Corey, Louisiana sending prayers and positive vibes to you and your families! 🙏🏻🙏🏻🙏🏻👏🏻👏🏻👏🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🙋🏼🙋🏼✌🏻✌🏻💯💯💯💯💯💯
Buck and Minnie looked like they were having such a good time! The military truck is looking very cool and I have done my fair share of stacking wood… I kind of enjoyed it.. lol
Yes it ain’t the worst chore in the world! I forget how sore I get from it lol
No worries. I really like watching yall. Yall are so much fun. Thanks for your channel
Awesome work guys 🛠🛠👍🏼👍🏼
Hanna you can't be a hater on the Namco. Early 80's had one and it was a work horse. It would get in tight spots like your shop. We told new hires to check the oil and coolant. haha being air cooled, we would see how long they would look for the radiator. And J-Bird your going to be the coolest girl in school!!!
I am glad to see the 41 getting some attention looking forward to wheeling with you two
Good looking blue hoodie !!!
41 is looking great.
the fender look at 23:21 was great//// removing the fender regardless of the tire movement loses the look.
Fyi, you dimple the fenders using the dimple dies. I'm really digging the way this truck is coming along. Hope to see it at some show soon!
Thanks for the Content! It's good to see you two working on projects!
You can also undo zip ties with a small flat blade screwdriver. You push it in on the actual part that clips in, you lift it up and the zip tie comes undone.
Great progress on the 41, thanks for sharing.
I like the way the 41 Dodge is headed . wish my wife worked with me on my projects she does not even want to come in the garage which ay be a good thing when you really think about it.
I think you should rework the front fenders and put a rolled edge on them to hide the ends of the braces. Maybe you could cut the rolled edge off the part already cut off and weld it back on the fenders. It would look like the rear fenders then if you are going to use the rolled edge on the back. Just a thought. Love your channel and thanks for taking us all along with you to North Carolina. I would have loved to have been there with you.
I love your dogs, Buckwheat and Minnie, they love Hannah playing with them! 👌🏻👍🏻👍🏻
Rock sliders looking good on that 41. That C10 stepside in the background lookin sweet, can’t wait to see the finished product.
You just committed the cardinal sin. Never admit the wife is right! ✅️ 💯 😅
If she's right she's right!
Happy to see it coming together. Thanks for sharing with us.
Brilliant one as usual, the truck is looking good. We hope your voting went your way, we are well chuffed over here..😉 Oh Cory fancy admitting your wife was right!! 🤣. Take care for now, love from us two in the UK.💖
Don't worry your young you guys will finish ,❤Love Jim J&R mobile service God Bless Y'all and your critters
Great to meet you and get a signature shirt last Saturday. Love the channel.
You guys always put out the best videos thanks a lot really enjoy them
Hannah has the strength of an Ox. That's a lot of strength.
I saw her pull that zip tie apart with her bare hands.
Ignore the pliers please. Military Truck gets a Salute.
Great progress on the Dodge
Good job and video Homies. WC , stands for Weapon Carrier which is based on the Power wagon
That’s really cool I didn’t know that!
@ I’ve always been a fan of the old military vehicles
You can put that rubber edging around the inside of the cutout for the shock to dress up your cut, Corey! You can also get a nibbler for cutting thin metal my friend! They work great on sheet metal!
I love the look of the front end of the dodge, it’s awesome!
Here in Australia apparently we have to have a wheel guard that cover's the wheel, no tyre past the fender, truck's looking great, thanks for sharing, all the best to yous and your loved ones
You could take the front fender part you cut off and flip it to opposite sides. Make the back of the fender wider to catch mud.
Candy world for fabricators, not all guys are into fabrication! I am because I’m retired from welding, fabrication and pipe fitting, Corey! I love fabrication and since I’m retired I love watching y’all and I have been waiting for the 41 Dodge! Put whatever you want in your truck, it’s your business what you want in the 41 Dodge brother! I’m just enjoying watching Corey! 👌🏻👍🏻👍🏻
Looks good need to round front edge of fender and if you use some 3/8 tubeing on edge of fender it shouldn't cut tire .
In regards the rear fenders, cut the tube brace up a bit further.
YES the 41 is Back, My FAV
Y'all build some pretty cool stuff but my favorite is the 41 I prefer a four-wheel drive over two-wheel drive low setting trucks but the other stuff y'all built are pretty cool
Hi could you not cut the piece of tubing on the rear a little more so fender would go up a little bit , you are both amazing you give me something to look forward to, sorry about the cutting comment
Sure enjoy your builds TKS for sharing 😊.
Nice flex on the truck. Keep up the good work kids!✌️
Y’all do really make an Amazing team. Keep up the awesome work…
Always doing a great job guys 😁😁😁 from Odessa Texas
You should be in barriers its a
Very cool i love kustoms guys i miss out on a 48 Ghevy
Pick-up it had a inline six look great it would have painted it satin black with blue Flames on it or just left satin black and have the inline six
Re built or put a .LS1 in it they
are a great motor guy's i will keep my eyes open one more met show up 41 Ghevy not to bad looking . guy's i wish i had a great shed like you guys or i will get a ford truck i not really care guy's i would do it in satin black guys so be safe guys
Definitely put some kind of grip on the running boards for traction getting in the truck!
Running from zombies 🤣😂🤣😂
lol
Hi Hannah, Looking Good Doll!! : )
Here comes that rainy day feeling!
Looking great. Take some rebar and weld to fender to protect from cutting tire.
Yo CWC Corey and Hannah HI again from the D Mi 😎 thanks for sharing another great video update on your progress with your projects/new Toy's especially the non-power wagon 😅😁😳🤩💞😎
Cory you need to trim the front fenders down and put the rolled edges back on the outside, that would really look better
She will love it
Hi there theirs guys it great to see you guys again its been a
Wild are you going to paint the old 40 truck your cool old truck green is nice colour guys
Take 2 in out of the center and weld it back together🤔🤓
Cory, seeing dodge truck cab on the ground in front of the chassis (part where j-bird was standing in front of it) would look killer bagged and laying rocker
Mish mash if content but loved every minute of it. ❤
You guys need to invest in individual clip on mic’s.
Keep’em coming!!
and good to see Trump get back in for a American he would be a lot better than the last one and you hope they this lot helps the poor people
From the shocking floods.
I love watching you guys and how easy going you both are!
My son and I have been working on a 70’ Loadstar. I’m currently looking for a donor truck. I know you guys like second GEN dodges, just wanted to pick your brain to see if a late 90s Chevrolet chassis would work also?
Or does the second GEN Dodge just work better?
So cool wht abt rebar around the fender to gv it the edge.
Love your videos, homies!
Still have to drill a hole in the Garage door so hannah can peep out to see who's coming up the driveway in the winter.
Looks good 🎉🎉❤❤❤
Great video keep up the great videos you guys make a great team
Forklift is stronger than you think brother! 👌🏻👍🏻👍🏻
Cory you should definitely take some like 1/4” or 1/2” round rod and weld the round rod around the edge of of the fender so that you don’t have the sharp edge on the fender plus the round rod will definitely help make the fender much more sturdier and much more stout for sure!!! Plus it would help it look more finished and complete!!! I have done this to a square body truck that a friend didn’t have room for the bigger tires he had got for his truck and didn’t want to spend the money to put a bigger lift kit on his truck so he had me figure out something for him and I just cut his fenders out and then the fenders were more floppy until I put some round rod around where I had cut the fenders off and was actually really surprised at how much it made it more sturdy!!! Jay bird heck know that uncle Cory picked you up in the mouse trap you got something that none of your other class mates parents or uncle have like your uncle Cory does!!! You should definitely be really happy to be able to ride in the mouse trap!!! Oh one last thing Cory !! Trump all the way and so sorry Harris fans but she is definitely FIRED NOW for sure!!!! Go Trump!!!!
You might want to weld some 5/16 round rod on the edge of the front fenders. It will give them more strength and you won’t have that sharp edge that will cut you or cut into the tire if the tire happens to hit it.
Keep up the great work love your videos thank you
Corey can't rush a beautiful lady
That’ll be cool to ride Jaybird in the mouse trap! 👍🏻👍🏻 She’s a sweetie for sure Corey! No need to be embarrassed! 👌🏻👍🏻👍🏻
Shaping up nicely Hannah and Corey
Me likey this a lot..think I would bedliner the rock bar step for traction. Couldn't you cut the stake pockets halfway and move the rear fenders up...keep up the good work
Expanded metal on the floorboards
You should make hing style arms for the garage door like from the building to the door and they should hold it up and fold down
Going to look great my friend! 👌🏻👌🏻👌🏻👍🏻
Though our taste in fenders differ, I'm loving yal getting back on the military truck, and I being in Tennessee wish I had known the 60 Dodge was available and could have been my very first old truck, farm truck, or Rat truck . All the old trucks appeal to me in a huge way . I'm looking forward to meeting yal, Tim and Jennifer at an event soon . I actually feel that Tim and me are brothers from different parents with my being 60 ofcourse I would be the older brother but looking to him and you for advice as I dig the hell out of the work from both channels and am always impressed by the finished products. Hannah's 58 will forever be my favorite as Turquoise is and always has been my color of choice much like her . And my final comment this time is to say the Halloween episode is hands down my all time favorite Wheats video with more of the complete crew including little J-bird and her gorgeous mom Hayley . The only people missing from the real regular crew was mom and Jimmy from that episode. I do also enjoy the ride alongs to your dad's shop as well . Many years ago I worked in New Albany Indiana at Beech Mold and Tool where I met and got to become friends with so many truly good people while I lived way out in Waddy Kentucky until I found out my wife at the time was engaged to the most afraid fella I ever scared the life out of so bad he literally was jumping across the hoods and deck lids of vehicles parked in the motel parking lot I found them at . I never really expected better from her due to the fact she was supposedly secretly married to another fella they were not supposed to know she was married to, but I later accidentally found her wedding pictures complete with parents in the pictures and by then we had a daughter together, so what do ya do but wait things out and prepare the best you can to get out of the wasted 7 plus years of my life . I also want to extend much gratitude for everything yal and the other fine folks did for the tragic storms that ripped North Carolina and East Tennessee as well as Florida apart . I thank you all as well as your followers very much for everything you all done for those devastated!!!! I already found the kindness of Indiana people after what happened to me in my last marriage and divorce 30 years ago . I grew to love and miss the friends made there that I've since lost touch with but have never forgotten. Lastly I'd like to say hello to Hayley and little J-bird ❤ !
Ps. I've watched the Halloween camping episode 10 or 12 times and if it shows up, I'm the one hitting rewind .
U could finish off fender edge with round bar
I thought you would’ve done that on the front fenders Corey but it’s hard to film everything and think at the same time! Kinda stressing!
In Australia your fenders HAVE to cover the tyres.
Wow!! Not here half the young kids tires are hardly under the body lol
I wish my wife enjoyed the junkyard like Hannah 😂
My grandfather used to stack his fire wood on tin and after he got it stacked up he would lay a piece of tin on top of it and it always stayed dry
If I was you I would admit that Hannah is ALWAYS right. Ha Ha
You need the lips on the front fenders as well 🧐 Hanna had stars in her eyes at the junkyard 😂😂
What about using the outer edge of the fender that you cut off as the fenders? That way you have the finished edge. Just a thought.
That's what they call penicillin in it
I have a 47 dodge panel wagon In great condition the body work and paint is already done. Original everything. And I'm not sure what to do with it. Thought about hemi in flat head 6 out. Semi wheels would be nice. Any suggestions??????
Weld round rod to the top of the fenders on the edge.
Question, where do you get your large cut off wheels. Are they for skillsaws? Or 7 inch grinders
Harbor freight 🤘🏼7 inch grinder
@corywheatcustoms thank you I'll get some
Looking Goooood!
I have a lot of free firewood in Scott county IN if y’all need more!
WOW! That is a LOT OF SUSPENSION TRAVEL!!! You Could Crawl Over Teslas All Day With No Problem!!!
So I have a question which old truck can fit on a 2000 f250 frame rails long bed king cab?
Hell yeah what a great election day it was! 🇺🇸 1ST 🇺🇸 Don't be afraid to show your patriotism! You got static over your Trump shirt quite some time ago. TRUMP2024 we did & it & it feels amazing already! Love ❤️ you guys I hope to meet you this coming summer.
How is all that steel not more rusty from sitting out like that ? Wow !
Why did you have to show that rotten sausage in the middle of me eating. lol 😂
Guys as always awesome awesome video
I split cardboard the same way Hannah.
Cardboard well that’s a whole new level
Did y’all film any from Russell Springs?? Ky
Yes we are going to try to have that video out Sunday or Wednesday
@@Hannahwheatcustoms
Yey!!!!
Save the outer part of the fender with the finished edge
Why not over the top of the spring tower to the top off the headlight protector frames.