The only thing I have never liked about the ready lift uca’s is the lack of protection for the top of the ball joint with grease zerk. I put my lift on during winter and got some rust by week one because the little pocket holds water and road salt. I 3D printer an abs plug that holds a retained o ring to seal out weather. Works great. Ready lift should send a plug for this purpose! Try the rear blocks and see what that looks like.
These longer more informative videos are just so much better then, here I’m gonna change my antenna. Combine those small items together to make longer, better videos. Truck looks awesome. Looking forward to your larger tire video. Have a great day.
That truck looks so damn good, I gotta say the squat was needed just so the height of the bed lined up well with the height of the hood, it looks like it sits leveled all around, the lift really set it off.
Truck looks great. I’d have to go ahead and install the rear blocks. I don’t know how bright the new LED reverse lights are. But the Diesel LED’s I installed in mine are insanely bright. I’ve seen peoples headlights that aren’t as bright as they are.
The truck looks mean and stanced up. Getting them baby squat vibes again ❤️. Also, have you considered repainting your wheels? The white ring definitely is unique, but I think it would look best if they were black again. Maybe someone around where you live can repaint and restore them, unless you’re up for the challenge.
I like a little squat in the back 1-2" is perfection. The only way to setup the newer trucks with the big front end. My platinum f150 looked like an old school drag car with her ass up in the air before I tuned it in... to each their own, don't worry about people talking trash that trucks stance is perfect bro! You got it first try! Hope yall are enjoying the new ride.
thanks, this is the first step by step install on the new sierras. I like the readylift, i think I will go with the same kit but i only want a 3", this is for a 22 regular cab short bed. i want the readylift control arms but not sure how I can only do 3"
Frankie again [70yr.old kid] from L.I. saying hello. The truck looks better & better. When I was your age their were plenty of magazines about trucks. Now I only find STREET TRUCKS. It is o.k. but they push these low to the ground trucks, low riders. They look rediculous.I can not see the attraction but to each his own. Again truck looks great!!! I'm going to putt putt over to Dunkin in my colorado to get a snack. Y'all STAY WELL & SAFE FRANKIE FLORAL PARK.
Love it man absolutely love it some chrome split 7s would make all the chrome pop even more in my opinion to each it’s own tho keep up the great work much love 💚
Truck looks great.. I have a 4 on my sierra (14) but personally I'm not a person that does squat.. my rear sits a half inch taller than the front. So just the slightest rake... lifted is always the way to go
Id probably not throw the top strut spacer on it and just the preload on in between the coil should leave it right at level with the rear or 1/2-3/4 lower than rear But then again on 12wides might not clear them 😅
Looks GREAT! I'm about to invest in this same kit for my 2019 GMC Sierra SLT 4x4! I need more clearance for the ruts we have on NM range roads, Did you add the rear 3" blocks and what rear shocks are you sporting how about the tire size? I like the aggressive look, please respond.👍
The truck looks good! Did the CV axle straighten back out to a more level position with the wheel and tire back on it sitting on the ground than the position it was in when you were installing the kit with the wheel and tire off the truck. What size wheel and tire are you running on the truck with this lift. I have a 2019 GMC sierra 1500 Denali and I'm looking for something like this for my truck.
Ooooohhhh looking fire!! I love the lift, can't wait to see the new wheel and tire setup. Edit: Should've watched the whole video. Pick that back end up. Lol.
Honestly, truck looks great. But I'm considering trading my Gladiator with 4" lift and 38s. It just isn't that drastic. I would only run 35s. I don't know. The perspective is just off for what I expected. Again, truck looks sharp as hell.
Was this the 899.99 4in kit? It comes with lift for rear too but you stated that you didn’t lift rear? I ordered the 4 in kit too, hopefully it arrives Wednesday.
I noticed when looking at the factory website, they offer a 2" leveling kit that looks like longer half shafts. Your Readylift didn't replace these. Any issues? What did you do with your kit after you removed it to trade the truck?
BEST installation demo on TH-cam!
I’d love to see the wheels from chomper on this truck. Not necessarily the wheels themselves but the graps would be 🤌🏼
fax
I love seeing 8 extensions being used on a ratchet. 100% dad move. 😉👍
Dad engineering.
The only thing I have never liked about the ready lift uca’s is the lack of protection for the top of the ball joint with grease zerk. I put my lift on during winter and got some rust by week one because the little pocket holds water and road salt. I 3D printer an abs plug that holds a retained o ring to seal out weather. Works great. Ready lift should send a plug for this purpose!
Try the rear blocks and see what that looks like.
Could I get a set lmao. I’d pay
Great idea! I had same issue with my Trail Boss.
Love you trucks and I joy the longer 15-25 min videos
Just got off work and instantly watched this ! Looks absolutely amazing. Cant wait to see whats next
I’m the 69th like lol, and the truck looks amazing! The lean gives the truck a better look to me (please don’t hate me)
Nothing wrong with a LITTLE lean. Like an inch up in the front maybe. Looks more aggressive to me.
I agree man
Agreed bro
Agreed
RIP Noobaonoverwatch
These longer more informative videos are just so much better then, here I’m gonna change my antenna. Combine those small items together to make longer, better videos. Truck looks awesome. Looking forward to your larger tire video. Have a great day.
Chase you need to invest in ratcheting wrenches, they will make your life so much easier
Little low in the rear due to the drop shackles but overall love it! Love the havoc wheels
i agree, looks a little squat'd
He said he has the drop shackles off in this video
Man those 33s look tiny with the lift
Truck looks killer, I'm not usually a fan of chrome but it flows nicely with your setup on black.
Had a lifted 2015 gmc sierra black and chrome with a 6.5 inch lift with 20s 12.5 wide miss that thing. Wasn’t a fan of the crime but it grew on me
Since u like wides with lip you should run some 24x14. But personally I love truck on 17’s with 35’s or 37’s
the headlights on this truck with the black paint look insane
With black paint you should protect the paint with a film
Had to come back and see this setup after your last community post. This setup was absolutely killer bro
The chrome on the top of the grille would look soo good color matched
Dude, you need to ditch those old ass wheels and get something newer for a 60+ thousand $ truck. Black needs chrome.
He needs to put 5e chrome snowflake wheels he had on the white truck on this one,chrome looks awesome with darker colors..black wheels are nasty.
I love the lift you should keep it like that
That truck looks so damn good, I gotta say the squat was needed just so the height of the bed lined up well with the height of the hood, it looks like it sits leveled all around, the lift really set it off.
Looks great time for reps or chrome wides
Some 6s an 5s would set it off man
nice rig🔥🔥🔥... do a vid on lowering the beams on the headlights
Truck looks great. I’d have to go ahead and install the rear blocks. I don’t know how bright the new LED reverse lights are. But the Diesel LED’s I installed in mine are insanely bright. I’ve seen peoples headlights that aren’t as bright as they are.
Time for some 24x14 and 35s!
Oh my god man way better! Truck is perfect now!
The truck looks mean and stanced up. Getting them baby squat vibes again ❤️. Also, have you considered repainting your wheels? The white ring definitely is unique, but I think it would look best if they were black again. Maybe someone around where you live can repaint and restore them, unless you’re up for the challenge.
The ring still hasn’t grown on me either, I think that’d look sick!
How are your cv angles? Is that not a concern with a 4” lift?
that's clean af man perfect amount of lean!
video quality and cinematics are getting 🔥
What size are the tires? Truck looks beautiful.
I like a little squat in the back 1-2" is perfection. The only way to setup the newer trucks with the big front end. My platinum f150 looked like an old school drag car with her ass up in the air before I tuned it in... to each their own, don't worry about people talking trash that trucks stance is perfect bro! You got it first try! Hope yall are enjoying the new ride.
you're very right! the little bit of lean on these new trucks with huge front ends like F250's and Sierra's is perfect.
Looks super good dude perfect squat 😜
Needs to put black tail lights and the lights on top of the back window the same it will look amazing if you did
It always looks better in person then on cam 😊
That thing looks nice 👌🏽 I didn’t think a 4 inch lift looks so good
Lookin purdy good LMF!
Looks incredible! I always find myself moving away from the screen when you picked up the strut assembly and took off that top nut… 🤣🤣
Beautiful truck bro all you need is a corsa exhaust with the dual tip to finish the icing on the cake
Damm it. You have a lot of patience. Truck looken good
@22:23 that’s an awesome setup and thats also what she said 😁
Grapps on the stocks would look so good!!
Looking good bro! Hoping I can get to where you are
I like how it looks now 👌🏻
I’m always picking rocks from my tires to keep from chipping paint 😊
thanks, this is the first step by step install on the new sierras. I like the readylift, i think I will go with the same kit but i only want a 3", this is for a 22 regular cab short bed. i want the readylift control arms but not sure how I can only do 3"
What size wheels and tires do you have ? Did you have to trim or any rubbing?
Absolutely love it..great work..make sure you get a bed liner to protect your beautiful truck..best wishes.
I love the little lean I would keep it how it is
Frankie again [70yr.old kid] from L.I. saying hello. The truck looks better & better. When I was your age their were plenty of magazines about trucks. Now I only find STREET TRUCKS. It is o.k. but they push these low to the ground trucks, low riders. They look rediculous.I can not see the attraction but to each his own. Again truck looks great!!! I'm going to putt putt over to Dunkin in my colorado to get a snack. Y'all STAY WELL & SAFE FRANKIE FLORAL PARK.
Looks good, how’s the quality of the ride since you installed it and how’s the lift been holding up and have you done any fixing since u got it ?
I am absolutely sold on the new gmc’s. The chevys were growing on me but damn tht ass doe
Awesome tutorial! That would never go that smooth for me!! Looks awesome!!
looks absolutely sick!!
Some big chrome reps would look fire asf.
Did you have to reconfigure the windshield camera and the electronic power steering? Love the information in your videos. Thank you!
Gooooossshhhhhh dang who don’t like a black truck 🔥, Gmc baby yeeyee
Love it man absolutely love it some chrome split 7s would make all the chrome pop even more in my opinion to each it’s own tho keep up the great work much love 💚
Really hoping he does the same wheel/tire setup from baby squat.. I don’t like many reps but 24” split 7’s and 35 XComps would set this one off!
For a fact bro the way it looks he might be able to clear some 26’s
Truck looks great.. I have a 4 on my sierra (14) but personally I'm not a person that does squat.. my rear sits a half inch taller than the front. So just the slightest rake... lifted is always the way to go
Alright now I miss the 24x12s… looks MEAN dude!!
That thing is a beast!
Thanks for the wonderful contact Chase I appreciate all that you do man truck looks great by the way
Hi looks great I was wondering how your axle alignment is ? Is it pretty straight ?
How are the CV angles and lower ball joints?
Id probably not throw the top strut spacer on it and just the preload on in between the coil should leave it right at level with the rear or 1/2-3/4 lower than rear
But then again on 12wides might not clear them 😅
Bro the rear end squat is killing what would be a perfect lift
the lights are insane lol
Love the new look how's the new jack
Please put rear kit on
I can’t wait to lift my truck. Be a pair of leaning bros 😎
How’s the ride Quality with the front springs being compressed
Put the rear kit on and it will really feel and look big.
You should take the spare tire because it would look clean seeing the back differential
You should do true dual cat backs out the side in front of the rear wheels.
Do some rear drop shackles it would be so clean
I have a 2022 AT4 in which already has a factory 2 inch lift, I want to add two more inches or a level kit so to kits my 35x12.50x20 tires.
is this the same height as your last white silverado trailboss? or is it taller than that truck?
Looks GREAT! I'm about to invest in this same kit for my 2019 GMC Sierra SLT 4x4! I need more clearance for the ruts we have on NM range roads, Did you add the rear 3" blocks and what rear shocks are you sporting how about the tire size? I like the aggressive look, please respond.👍
The truck looks good! Did the CV axle straighten back out to a more level position with the wheel and tire back on it sitting on the ground than the position it was in when you were installing the kit with the wheel and tire off the truck. What size wheel and tire are you running on the truck with this lift. I have a 2019 GMC sierra 1500 Denali and I'm looking for something like this for my truck.
With the front axle angles.....how much vibration in 4x4 do you have ?
Ooooohhhh looking fire!! I love the lift, can't wait to see the new wheel and tire setup.
Edit: Should've watched the whole video. Pick that back end up. Lol.
back end is perfectly fine
needa see this thing wit the mud grapps on
Love the truck
“Don’t kill yourself with a spring compressor” lol
Love it man 💯 my favorite truck of yours
Honestly, truck looks great. But I'm considering trading my Gladiator with 4" lift and 38s. It just isn't that drastic. I would only run 35s. I don't know. The perspective is just off for what I expected. Again, truck looks sharp as hell.
Looks dope man
Looks good man, are you looking for a different wheel setup or sticking with that one?
Looks good. Are you going to lift the back end up or leave it like it is. Are u going to do the exhaust too
so did you or did you not add the rear lift blocks ?
Does that affect the performance of the cv axel?
You should get some 26 inch spilt 7s
Was this the 899.99 4in kit? It comes with lift for rear too but you stated that you didn’t lift rear? I ordered the 4 in kit too, hopefully it arrives Wednesday.
Nice work
Another good looking truck you have put your touch on. Don’t sale it lol!
I think now that you have the new jack that I have like 3 of but I think you need a good set ot ball pen hammers
After the lift do you have any scrubbing with the 12 wides or can you do a full lock to lock turn now?
I noticed when looking at the factory website, they offer a 2" leveling kit that looks like longer half shafts. Your Readylift didn't replace these. Any issues? What did you do with your kit after you removed it to trade the truck?
I bought a 2022 Sierra elevation with absolutely no intentions of modifying. But damnnnnnn
Do you need shock extensions in the rear?
These newer trucks dont need cotterpins on the axle nut or on the uca ball joint? My 18 did