Make your system stand out with EZDIY-FAB Multi-Angle Vertical GPU Mount

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 ม.ค. 2025

ความคิดเห็น • 48

  • @4ujase
    @4ujase 9 หลายเดือนก่อน +2

    I have the the PHANTEKS GPUKT 4.0 ARGB Rotatable Video Cards Bracket Kit much better quality but you do pay much more for it.

  • @inmitch
    @inmitch ปีที่แล้ว +2

    Thanks for covering this, I'm looking at possibly using one of these to mount a 7900XTX in a Hyte Y60 where that card normally sits too close to the glass.

    • @blk02ta
      @blk02ta 9 หลายเดือนก่อน +1

      Did you end up doing this? I've also got a 7900XTX and am curious about a vertical mount that works with a triple thick GPU.

    • @inmitch
      @inmitch 9 หลายเดือนก่อน +1

      @@blk02ta I went with a Lian Li Vision case and a 4080 Super. I'm very happy with both, didn't really want to support Nvidia, but I did want Ray Tracing and a cooler running card. It may be my last Nvidia card.

  • @chrisvashck1141
    @chrisvashck1141 2 ปีที่แล้ว +3

    How do you run display cables in this thing? I would say it is useless tbh.

  • @nachovidal4047
    @nachovidal4047 หลายเดือนก่อน

    Nicee! If you remove the 2 feet that make the job of the multi angle, could be used like a vertical standard mount?

  • @Omnitrio1
    @Omnitrio1 ปีที่แล้ว +1

    this is hopefully the answer to may oculink egpu set up. i just bought a 4090 for a egpu and i canot figure out how to mount to anything i cant make a bracket as i am not getting razer chore x just to use it as a case lol. arrives tommorow and i have the new gigaybte 4090 v2 which is 2 and half slots thin. shweeeeeeeeeeeeeeeet

  • @Monkeylog
    @Monkeylog ปีที่แล้ว

    i found an ex-display black model and some company is selling it for only $35 USD def gonna buy it

  • @stephenzetts1839
    @stephenzetts1839 2 ปีที่แล้ว +5

    Just bought this because your vid. You could always move the screws to the back slot to make more space if completely vertically mounted? I have a 4090 and Hytey60 on the way. This will give me much more space in that case and be less against the glass. But even more if I mount it straight up and down and just move it further back correct?

    • @Funkykit
      @Funkykit  2 ปีที่แล้ว

      Glad our video helped. Thanks for the supprt ... please subscribe and share our content

    • @cackoocacho1629
      @cackoocacho1629 2 ปีที่แล้ว

      Curious if you successfully mounted a 4090 to this bracket? If so, which model 4090 is it?
      I am mostly concerned about the thicker 75mm models, whether this would accommodate them or not.

    • @stephenzetts1839
      @stephenzetts1839 2 ปีที่แล้ว +1

      Hey! I have a zotac 4090 Trinity and it works perfect. I can totally make it tilt back a ton but that’s because the GPU would hit the mobo in my pc case. Honestly helped my temps like crazy too!

    • @stephenzetts1839
      @stephenzetts1839 2 ปีที่แล้ว +1

      Can’t make it tilt a ton**

    • @cackoocacho1629
      @cackoocacho1629 2 ปีที่แล้ว

      ​@@stephenzetts1839 I have the Meshify 2 XL, and as big as it is, I am still concerned with space with these 4090s. XD It sounds like it could work out though.
      I'd be willing to run with my side glass off, if absolutely necessary, but, would rather keep it on. Will see how things come together.
      Thanks for the reply, appreciated. I think I'll go ahead and try one of these for the Gaming X Trio I have incoming.

  • @jax6300
    @jax6300 5 หลายเดือนก่อน +1

    can it be angled when it just floats in the air?

    • @Funkykit
      @Funkykit  5 หลายเดือนก่อน

      Yes it can be angled 👍

  • @Stanislav7180
    @Stanislav7180 8 หลายเดือนก่อน

    pls make bracket with bolts

  • @frankdelisa1613
    @frankdelisa1613 ปีที่แล้ว

    What keeps the bracket mounted to the bottom of the case or the case itself? Is it just free standing?

  • @Vinchucca1984
    @Vinchucca1984 ปีที่แล้ว +1

    How much length would this add to the GPU? Trying to figure out if this would fit in a Fractal Design North TG case with my Gigabyte 3070Ti gaming 8G.

  • @bigdaddyschin5692
    @bigdaddyschin5692 ปีที่แล้ว

    If I could please ask that your BOOST your audio when making these types of videos. Kinda hard to hear you

  • @TheEightshot
    @TheEightshot ปีที่แล้ว +3

    That plate that the GPU leans against looks like I would block A LOT of air flow. Also it appears to completely lack any kind of plate to attach it to the case at the back, meaning you have to sort of dangle the cables into the back of your case. Its a shame really, 10 seconds of actual thought could have made this a fantastic product.

    • @bigdaddyschin5692
      @bigdaddyschin5692 ปีที่แล้ว +3

      Yeah that would be helpful. But thank Jesus there’s nothing of importance on the back of your GPU that requires it needing air flow. Also not the fact that air dispels out the SIDES of the GPU and not the back plate. ALSO not the fact that you completely missed it having 3 giant slots on the back of the vertical mount FOR airflow if you wanted. Sure you could dangle your cables into the back of the case. Or clean it up with some zip ties….

    • @MichelleKirkwood-kd7lq
      @MichelleKirkwood-kd7lq ปีที่แล้ว +4

      Fundamental lack of knowledge. Air doesn't flow through pcb. It comes it through the fins such as the i/o intake. Used a cfm flow meter, air flow is fine.

  • @LicoFn
    @LicoFn ปีที่แล้ว +1

    Does it need to be on the bottom off the chase or can it hang ?

  • @pvp1589
    @pvp1589 2 ปีที่แล้ว

    hi howdy, what is the model of the pc case you are using on this video ? thanks

  • @larryjasper9721
    @larryjasper9721 ปีที่แล้ว

    lets see it with the monitor cables plugged in and routed

    • @Funkykit
      @Funkykit  ปีที่แล้ว

      Haha yes it was a pain to get those monitor cables plugged it 😅

  • @snoopaloop65
    @snoopaloop65 2 ปีที่แล้ว

    do they have one for 4070 ti

  • @InfernoTrees
    @InfernoTrees ปีที่แล้ว

    How'd u get that second screw in man I'm STRUGGLING

    • @inmitch
      @inmitch 9 หลายเดือนก่อน

      Magnetic tip screwdriver or it's impossible.

  • @astralboy
    @astralboy 2 ปีที่แล้ว

    no mention about the dimensions, seems like a miss to me. no info on amazon product page either, fools.

  • @DoooFus
    @DoooFus 2 ปีที่แล้ว +3

    its a cool concept but i feel like the led diffusion could be done better

    • @otreblarazalas669
      @otreblarazalas669 2 ปีที่แล้ว

      It looks good. It isn't well diffused from the bottom when it's angled but it's diffused well from above

  • @darkwizzard0058
    @darkwizzard0058 ปีที่แล้ว

    Hello there , I’ve got some issues that you might be familiar with , so I’ve tried 2 of this brackets and when mounted there is no display from the GPU , although if GPU mounted originally then I’ve got image. This sound familiar to you ? Do you have a solution for this ? Thank on advance

  • @lawshadow2011
    @lawshadow2011 ปีที่แล้ว +2

    I don't get this video WHY did you swapped the PCIE cable yeah i NOTISED this pretty uninformative from your side you should tell your viewers about your changing cables because THIS is not a true repressentation of this product. Most videos you make are GOOD but this one is not.

    • @Funkykit
      @Funkykit  ปีที่แล้ว

      Yes I used a different cable so that I can use it for my PC project. Apologies if it was misleading

    • @lawshadow2011
      @lawshadow2011 ปีที่แล้ว +1

      @@Funkykit No worries man, i was interested in this product since it is "advertised" as PCIE4 yet many people complain about companies who made these "PCIE4" cables actually lie all it does its a improved PCIE3 cable that does not cause BSOD and crashes when putting it in a PCIE4 slot but not at FULL PCIE4 bandwith. At first glanse the stock cable is a bit short for my RTX 4090. Keep up the good work cheers.

  • @Damaged7
    @Damaged7 2 ปีที่แล้ว

    Is your Brick of a GPU just not bulky enough for you? Do you laugh at 3 slot designs? Now you can bulk up that pixel brick and show that FPS counter who's boss.

    • @edioi_com
      @edioi_com 2 ปีที่แล้ว

      man, could be a reason that someone need this kinda pixel brick, eg with water block, your GPU could look less bulky and better cooling however most of the time it might be too high to fit into the case by using the horizontal (standard) mounting position.

  • @Factsfun-kg4xc
    @Factsfun-kg4xc ปีที่แล้ว

    $68 thanks but no thanks

  • @2011jaydog
    @2011jaydog 2 ปีที่แล้ว

    THATS NEAT...NEED 1 GOR THE WIFES PC, GET HER 3070 AWAY FROM GLASS IN HER THERMALTAKE VIEW31 CASR I THINK IT IS, CAME WITH VERTICAL BRACKET BUT LIL CLOSE..