It does look and run fantastic!! BUT for those who dont know (this isnt really directed at you), aluminum arms are a big no no when going offroad and bashing/jumping. You WILL break something down the line worse than the arms. Also, another tip to those that dont know, that chassis plate is great, just make sure you cut a hole where the spur gear sits so dirt and debris can escape and save the spur from stripping. Awesome build again!
That typhon is decked out brother I absolutely love what you did with it! 4S is ballistic, sick ass angles! You Rock man! Keep up the great work! Best Typhon 3S model on TH-cam hands down!👊👊💯🔥✌💪😃
Appreciate the kind words brother. Always appreciate you stopping by and checking out the vid brother. Such a killer Rig bro. Hats off to Arrma. So much FUN and addicting to drive. Loving this speed monster buggy.
Awesome bud. You have killed any sadness I had because of the announcement of the new 6s Typhon ;). Plenty of life in the 3s Typhon, totally worth upgrading and I like the t-bones additions. I put them on my Losi Stadium truck recently, T-bone's are the bomb. Great vid, thanks man!
Thanks my friend. Always appreciate you stopping by and checking out the vid brother. Was actually considering getting the 6S version but I was blown away and super impressed with this Typhon 3S in terms of speed and simplicity of the truck. Super easy to work on. It's a nice change from 6S BLX Trucks for sure. tons of upgrade parts support as well.
I appreciate your time watching friend. I no longer have this truck. I believe I had a BLX185 6s system running it on 4s. Aluminum arms. I have a few videos on this truck in my channel.
Thanks very much bro. She's is super fun for just messing around in the streets. Something different to do when not Sending my other Beast LOL 😂. I was debating if I should go up to 26t maybe not...
@@andybcardoso1978 you're daring me bro, you're daring me! LOL 😂. I might as well try to run it on 6S since I have the BLX 185 on it and watch her tear it up! Watch all tires explode LOL 😂.
@@CommanderAstigRC nah man don't rip up the new badlands get some proper street tires like SRC terrain crushers! I have a set on my losi shelf queen ...they dont balloon either
@@andybcardoso1978 I do have 2 sets of those SRC road crushers for my Talion but they're way too big in my opinion man.. ordering a set of the GRP tires, suits way better for this speed monster buggy.
Sweet street run buddy! My typhon 3s is VERY similar. Blx 185 23t, Same hsp 81002 front 81003 rear shocks. 4mm shafts are impressive. Nero ends fit perfect. Just dialing/tuning her and she'll be in a vid soon.
Thanks very much bro. She's quite a ripper for sure. Planning on upping to the highest pinion the motor mount can hold which is 26t and running it on 4S. We'll see how it goes. What could go wrong.. right?! LOL 😂
Your Typhon screams on 4s. I think I should upgrade my steering rack on mine too. That seems like a good way to improve tracking at high speed. Awesome video man. ⭐⭐⭐⭐⭐
@@CommanderAstigRC I had to come back and watch again. It would be nice to have 2 3s Typhons. One for off-road and one for street. 4s really rips. No worries on your shock covers as they are super reasonably priced. That's what I like about the 3s Arrma's. Again you did an amazing job on your Typhon. 👍👍
Thanks very much bro. This 3S buggy is way more capable than she's made for no doubt. She smooth nice and stable so far. We'll see how she does on 26t pinion.
Thanks very much man.. always appreciate it. I finally got the steering nice and dialed on this buggy. The GPM Aluminum steering bellcrank upgrade pretty much eliminated all of that. Killer upgrade made a huge difference on keeping nice and straight and stable.. love this monster speedy buggy.
Thanks Sami. Appreciate it very much bro. Love this buggy man.. she never cease to impress me. Hats off to Arrma from r such a killer Rig. Tons of value for the money. Love the simplicity and affordability of parts..
Appreciate it my friend. She's quiet Fast for sure man.. the added weight from the aluminum upgrades keeps her planted but the bigger tires still lift her front end up tho. Gonna try a low profile tires next street run. And maybe gear up to 26t running 4S. What could go wrong.. right?! LOL 😂
Thanks very much bro. Appreciate it. She's my dedicated street ripper Typhon. So only running her on streets and open Parking lots.. it's a good change from bashing and Sending my other Rigs out. We all need some high speed runs here and there sometimes... LOL 😂
Thanks very much bro. I just feel like this rig is lot more fun on 4s man.. she's way more capable for sure. Or Maybe I just like to push things over the edge LOL 😂.. I'm debating on upping to 26t.
I'm wondering what aluminum arms would work with the typhon 3s Don want to buy any and notice they don't work would the granite senton and such be the same? Or is the typhons Alitalia longer? Or are you running stock shafts?
bro again, great job man your vids on the 3s are a treat! mate, can you please tell me how did you zip tie fasten the 185 blx esc there? Did you have to make holes in the chassis yourself? I'm adding the 185 blx esc as well on my 3s Typhon. Would the body still fit if I just double sided taped it back in the original position where the stock esc normally screws in? Your time and help is greatly appreciated as always man! Thank you!
No the body won't fit if you place the blx185 ESC where the stock was. There are two holes in between the receiver and motor. You can mod a plastic plate piece that you can screw into those hole like an ESC plate. It's a tight spot but ESC should fit just right.
@@CommanderAstigRC Are you having any problems with it coming loose? mine went bust yesterday kept coming loose then the center screen broke on me. So I drilled a hole in it and epoxied a pin through to eliminate the slip. Seems to be working ok super responsive. but idk if it will cause any problems in the long run.
@@operation11charlieinc hope you feel better soon bro.. you got the heavily upgraded Typhon 3S and a brand new Kraton to break in for some speed run brother.. 👍👍. Looking forward seeing you bashing/running and having fun bro.
eBay.....big bore aluminum shocks $39 all 4...I love em...just add oil....I use the gold shocks.....diff colors avail www.ebay.com/i/283867073394?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=283867073394&targetid=935083617307&device=m&mktype=pla&googleloc=9025754&poi=&campaignid=10897980225&mkgroupid=108153775340&rlsatarget=pla-935083617307&abcId=9300403&merchantid=114608936&gclid=CjwKCAiA7939BRBMEiwA-hX5JzOdVvlKKo6acorRkyYOlO83DQuVQoZukKt8pOt1VQ_3AfN635StvxoCv-wQAvD_BwE
Thanks very much man. She's my dedicated street ripper Typhon. She replaced my street ripper Talion since I converted it to a Notorious hybrid. Impressive little Beast.
Thanks very much bro. Appreciate you stopping by and checking out the vid. This buggy is awesome man.. LOVE it. Just watched your Typhon video too. Awesome run. 20t really wakes buggy up to Life man.. trying 26t running 4S next run.
Man that looks like such a sweet rig, seriously quick and super stable with the new wide stance! Makes my Hyper VSe look seriously slow man 🙈 the stability is immense dude 👍🏻
Always appreciate it very much bro. I'm Loving this little speed monster man. She's quite quick on 4S kinda scary little bit LOL 😂. I need to pay close attention on this up close and personal speed runs coz it could get NASTY if it hits me😲😱😬. How's your MT410 doing bro? I need to take mine out badly coz it's been quite a long time..
CommanderAstig RC Yeah man defo need to pay attention 😂 I sold. My MT410 🙈 just wasn’t getting used enough and I hated having such an expensive build sat there doing nothing. I’m likely gonna replace it with a Kraton V4 once the weather improves 👍🏻
@@cbix86 oh WOW 😲. Sad to hear 😢 you let her go bro. But I also understand what you're saying.. Kraton will be an awesome and even more Beastly of a replacement for sure. My MT410 is still hanging tough and strong man.. taking her out next bash. Bash on brother..
CommanderAstig RC The tekno is a great rig but at a high cost and I’m moving house so had to let it go 😕 at least I’ve got your running videos to watch 😉
Quick question, I have an ARRMA 3s #Typhon and I am wondering what Hot Racing extenders can I run for improved stability? Are they the Hot Racing Arrma Nero 17mm +5mm Wide Hex set so I can run the proline 2.8 badlands on my 3s Typhon?
If you read the comments? Plz get back to me with a responce. I have the same one and they told me I can only use a 3's 5000 emp battery. What 4's battery you have?
Sorry late reply. This Typhon was running an upgraded system BLX 185 6s system but running it on 4s Lipo batteries. You can run 4s on stock system. I recommend mixing it up, run it on 3s and 4s. Hope this helps.
That is the best typhon 3s to date bro,Its the only vehicle I see where alumi arms would be a benefit,keep more wait at lcg to help anchor down with all that power🤜🔥🤛
Thanks for the kind words brother. Always appreciate it. She's solid and stable so far.. loving this setup so much FUN to drive.. let's see how she does on 26t pinion.. what could go wrong.. right?! LOL 😂
New to RC cars. Just bought my nephew the base version of this same car (Brushed motor. max 30mph). I’m not sure if we got a defected unit but we can’t run this brand new car more than 4-5 minutes before it quits. The red light on the ESC flashes red, I’m assuming for overheat? Please share any knowledge on what could be wrong..
Appreciate you stopping by and checking out the video Benjamin. Two things could be going on there. Either thermal shutdown (overheated or LVC (low battery). Let it sit for a bit to cool down electronics and try again. Lastly Recharge the battery and try again. I recommend converting to a brushless system to get the most Fun out of this Typhon. Hit me up on Facebook messenger Crisanthony Astig RC. I can help you there more.
What esc are you using? I just bought the 3s version and I wanna run my 4s lipos.I have a Hobbywing max 10 setup laying around and was thinking about doing the swap and selling the stock arma setup.Thx for the video.I love the setup man
Thanks very much bro. This 3sers are very impressive Rigs man.. definitely worth looking at. Great value tons of speed even on stock electronics. 4S definitely brought her to different level 😂. She's gonna be ballistic on 6S!!😂😂😲😱. Love the weight from those aluminum upgrades keeps her planted to the group mostly. gonna try a low profile tires next run and maybe 6S??😬😲😂🤞. What's the worse that could happen.. right?! LOL 😂
@@CommanderAstigRC ah I forgot they make 2.8s now! I was gonna grab those new badland 1/8 buggy wheels but maybe I'll grab these. Thanks for the help commander! I realized notifications weren't on for your channel so I turned it on so I won't miss anymore vids 👌👊
this is so awesome big thank you from all of us 3s Typhon owners! Mate if you don't mind could you please tell me if that is the same motor that came stock with the 3s? Did you just add the 185 BLX esc to it? Thanks again mate!
@@CommanderAstigRC so much appreciate your prompt reply and everything else man, means a lot to us enthusiasts, you're doing an awesome job! Keep up the great work and enjoy bro! thanks again!
@@CommanderAstigRC Bro quick question please, did you have the 2050kv motor too with that system? ..and did it slip right in as an easy swap out/ swap in from the original stock system? Thank you so much man!
CommanderAstig 🚀 CA🔸RC Thanks bro. I have a 3s Granite/ typhon with 6s esc and currently 4 s motor and I have the brace / body and tbone parts for making my truck a Outcast. It’s going to have 4 cars different parts when I am all done. Thanks for the info bro. ❤️👊😀
CommanderAstig 🚀 CA🔸RC ❤️👊😀For sure Bro. I have my own channel now and my first TH-cam vid I put up a bit ago. Arrma bash / jump vid It’s nothing special. 😌 It’s been to long since that video. I will have another one up soon All powered up going CRAZY. 👊😀
Bro I put that blx 185 6s system in my typhon 3s with a 21t pinion and ran it on 4s and feel like it's slower then the 3s system... I was super disappointed. Somthing has to be wrong, I put the gos on it and too speed was 46.8 mph.. the battery was a 4s 6500mah. 100c power hobby battery...WTF...any ideas why it's performance was so bad
@@wynnfpv I started with drones and I still fly once in a while. I'm into RC Trucks at moment.. if you try RC Trucks I'd recommend taking a look at Arrma RC Trucks. They're by far the best in terms of durability and just overall awesome experience.. you want a truck that's durable enough to start with and doesn't break easily. More running/bashing and less fixing/wrenching..
Hey brother, just a heads up. There's quite a work goes into this build if you're thinking about going this route. Please watch this video if haven't. th-cam.com/video/r_V08MUoHsY/w-d-xo.html
That is looking very aggressive man, verrrry fast!!! What hex extenders did you use? Ive got the hot racing 12 to 17 ones on my granite atm and they keep snapping my axles. I wanna fit some typhon axles instead but I need to throw my wheels out more with some extenders. They drive so much better with a wider stance dont they.
Thanks brother. Appreciate it. The Typhon comes with a 17mm hex and I used the Redcat Racing Bs936 003 hex extenders plus another 1/2 from running the Badlands tires.
Appreciate your time watching brother. Can't list them all. GPM arms, 2.8 Badlands on f11 rims, DHK zombie shocks, BLX 185 system (motor & ESC) Tbone racing bumpers and skids.
Have you put a GPS on it yet to see what MPH you get on 4s? I just destroyed my typhon last night doing speed runs on 4s BLX 120....but my Traxxas TQi TX lost signal to my receiver and I literally watched my Typhon drive straight under my own actual car...split the front end chassis, bulkhead and shock tower
@@CommanderAstigRC Thats too bad. What made you get rid of it? She ran like a demon man, absolute beast. Im watching this too many times because I am waiting for my motor, aside from that my new roller is all ready to rip 😎😎
@@RileyBanksWho too many trucks gotta make room for new ones LoL 🤣. Was having too many issues with the popping driveshafts then. Was an awesome Fun buggy. She was definitely little ripper!
Curious how long the 3s max difs, will hold up under 4s power. Why do all those upgrades, when you can put the 4s pack into a 6s Typhon and gear it up. Kinda the same thing....Nice build though. :)
TBH. I feel like the diffs are way my re capable than 3S man.. time will tell. Had a huge wrecked and no arms replacement available at that time so went GPM Aluminum arms route and made to work.
CommanderAstig RC, My comment wasn't meant to down play your build. Its a fantastic build you've done💪. I did the same thing to a Stampede back in the day. But as we all know, traxxas difs are garbage. The fluid would be gone after one use under 4s. 😕...love the videos, keep them coming! 🤘
Nice runs. Cool spot with the corners in the middle. Perfect.
Thanks so much. I appreciate your time watching brother. I'm fortunate to have such a spot outside my garage.
It does look and run fantastic!! BUT for those who dont know (this isnt really directed at you), aluminum arms are a big no no when going offroad and bashing/jumping. You WILL break something down the line worse than the arms. Also, another tip to those that dont know, that chassis plate is great, just make sure you cut a hole where the spur gear sits so dirt and debris can escape and save the spur from stripping. Awesome build again!
That typhon is decked out brother I absolutely love what you did with it! 4S is ballistic, sick ass angles! You Rock man! Keep up the great work! Best Typhon 3S model on TH-cam hands down!👊👊💯🔥✌💪😃
Appreciate the kind words brother. Always appreciate you stopping by and checking out the vid brother. Such a killer Rig bro. Hats off to Arrma. So much FUN and addicting to drive. Loving this speed monster buggy.
Best Typhon 3s setup I've ever seen bar none!
How fast do u think it's running with that combo??
Awesome bud. You have killed any sadness I had because of the announcement of the new 6s Typhon ;). Plenty of life in the 3s Typhon, totally worth upgrading and I like the t-bones additions. I put them on my Losi Stadium truck recently, T-bone's are the bomb. Great vid, thanks man!
Thanks my friend. Always appreciate you stopping by and checking out the vid brother. Was actually considering getting the 6S version but I was blown away and super impressed with this Typhon 3S in terms of speed and simplicity of the truck. Super easy to work on. It's a nice change from 6S BLX Trucks for sure. tons of upgrade parts support as well.
Yeah I was blown away too. You made some great moves in your decisioning. GO ARRMA!
@@camillebrenes for the price.. it's no brainier. Tons of value for your money and affordable replacement parts! Just awesome man. Hats off to Arrma!
Would you be willing to share your setup that thing is AWESOME 👌
I appreciate your time watching friend. I no longer have this truck. I believe I had a BLX185 6s system running it on 4s. Aluminum arms. I have a few videos on this truck in my channel.
That Arrma looks like fun! She rides on rails , great control and very SPEEDY!!!
Thanks very much bro. She's is super fun for just messing around in the streets. Something different to do when not Sending my other Beast LOL 😂. I was debating if I should go up to 26t maybe not...
@@CommanderAstigRC go for it! 🚀😂
@@andybcardoso1978 you're daring me bro, you're daring me! LOL 😂. I might as well try to run it on 6S since I have the BLX 185 on it and watch her tear it up! Watch all tires explode LOL 😂.
@@CommanderAstigRC nah man don't rip up the new badlands get some proper street tires like SRC terrain crushers! I have a set on my losi shelf queen ...they dont balloon either
@@andybcardoso1978 I do have 2 sets of those SRC road crushers for my Talion but they're way too big in my opinion man.. ordering a set of the GRP tires, suits way better for this speed monster buggy.
Sweet street run buddy! My typhon 3s is VERY similar. Blx 185 23t, Same hsp 81002 front 81003 rear shocks. 4mm shafts are impressive. Nero ends fit perfect. Just dialing/tuning her and she'll be in a vid soon.
That is FAST! I am getting one next month.
Thanks so much Tommy. Congrats man. You'll love and enjoy it.
@@CommanderAstigRC Thanks!
That spot your driving is awesome!! Nice and tight !! Jeez!! That typhoon is fast!!👍👍
Muchly appreciated brother. This buggy is such an awesome value for the money. This thing is impressive.
off topic but your neighborhood looks very nice
Thanks so much 🙏👊🤘! Appreciate you stopping by and checking out the video.
Typhoon looking good a lil speed demon nice build
Thanks very much bro. She's quite a ripper for sure. Planning on upping to the highest pinion the motor mount can hold which is 26t and running it on 4S. We'll see how it goes. What could go wrong.. right?! LOL 😂
CommanderAstig RC all part of the game send it lol
Your Typhon screams on 4s. I think I should upgrade my steering rack on mine too. That seems like a good way to improve tracking at high speed. Awesome video man. ⭐⭐⭐⭐⭐
Appreciate your time watching brother. It definitely helps.
@@CommanderAstigRC I had to come back and watch again. It would be nice to have 2 3s Typhons. One for off-road and one for street. 4s really rips. No worries on your shock covers as they are super reasonably priced. That's what I like about the 3s Arrma's. Again you did an amazing job on your Typhon. 👍👍
@@RCRoads I appreciate you Bro.
That’s sweet me. She definitely gets in. Looks good👍👍
Always appreciate you stopping by and checking out the vid brother. I'm very impressed with this Rig. Not bad for my very first Buggy.
She's cruising!
Thanks brother man!! Appreciate it bro. She's ripper for sure.
Damn u have that arrma upgraded to the max wit top stuff!!👍
Your buggy looks awesome. Trying to decide if I want to pick up one of those while they are on sale. 2050kv?
Good value. Lot of fun to rip around. Ya I put blx185 system in it
@@CommanderAstigRC Okay cool. I saw that you put the 185 in it. Wasn''t sure if you had put in the 6s motor.
@@JasonPerrinRCVlogs yes motor and ESC but I was only running it on 4s.
Awesome build!
Appreciate your time watching and the kind words Polo.
Fantastic awesome speeds, great to see your mods working well, great video 👍😊👍
Always appreciate it very much bro. So far she's solid and stable. Gonna make her faster next run.. LOL 😂
Your welcome bro, bash on bro 👍😁👍
Nice upgrades brother very clean that bad boy is fast 🚀 I'm thinking about getting one keep the videos rolling 👍🏾 ARRMA 💪🏾
Thanks very much bro. This 3S buggy is way more capable than she's made for no doubt. She smooth nice and stable so far. We'll see how she does on 26t pinion.
She does drive very straight and stable. Flying she is damn nice upgrades looks great.😁👍
Thanks very much man.. always appreciate it. I finally got the steering nice and dialed on this buggy. The GPM Aluminum steering bellcrank upgrade pretty much eliminated all of that. Killer upgrade made a huge difference on keeping nice and straight and stable.. love this monster speedy buggy.
Remove the spacers out of the shocks..and the car handles far better💥it worked for me..nice vid⚡️👍
Appreciate your time watching brother. Was running upgraded Shock.
Very clean set up Anthony with all the aluminum, new aluminum shock and the esc directly on the chassis. It very fast and stable too :)
Thanks Sami. Appreciate it very much bro. Love this buggy man.. she never cease to impress me. Hats off to Arrma from r such a killer Rig. Tons of value for the money. Love the simplicity and affordability of parts..
Nice job with the Typhon Bro !!
Looks sweet and dam she moves
👍🏻😁🤟🏼🤙🏼
Cool vid man 😜👊🏻
Appreciate it my friend. She's quiet Fast for sure man.. the added weight from the aluminum upgrades keeps her planted but the bigger tires still lift her front end up tho. Gonna try a low profile tires next street run. And maybe gear up to 26t running 4S. What could go wrong.. right?! LOL 😂
CommanderAstig RC haha what’s the worst thing that could happen 🤟🏼
I like the upgrades you did. My Typhon don’t look new no more after racing it. Good job bro
Thanks very much bro. Appreciate it. She's my dedicated street ripper Typhon. So only running her on streets and open Parking lots.. it's a good change from bashing and Sending my other Rigs out. We all need some high speed runs here and there sometimes... LOL 😂
Nice buggy!!
Appreciate your time watching Trey.
Shes a runner for sure. Nice lik setup man
Muchly appreciated brother. Thanks very much for the sub support bro. Subbed right back at you 👍
Jump 2 houses with that speed😎
Took those corners pretty good! Mine would have flipped every time at those speeds
Nice! 👌👌 I really like what you have done with this 3s/4s Typhon 👍 It's a little rocket for sure!
Thanks very much bro. I just feel like this rig is lot more fun on 4s man.. she's way more capable for sure. Or Maybe I just like to push things over the edge LOL 😂.. I'm debating on upping to 26t.
Nice upgrades, she is looking fast 👍
Thanks Scott!! She's my first Buggy and she continues to impress me every time. Just a fun Rig. Hope things are awesome with you and your RC stuff.
So this is running 4s on a blx 100 amp controler? Its having no issues with the extra voltage?
It was running for 4s on blx185 6s system
Great video did you change esc and motor
What power batter 2
Did you get mph
Great video
Thanks so much. I swapped the system to BLX 185.
CommanderAstig 🚀 CA🔸RC wow when you say system do u mean motor and esc or just esc ❤️
@@CmwSpeedrunUk motor, ESC and servo.
CommanderAstig 🚀 CA🔸RC wow what a massive difference Brilliant speeds and control 🏆
Hey, can you tell me pls how thick that chassis skidplate is?
Appreciate your time watching Bro. Not 💯 sure. It made by Tbone racing. Should be on their website
You should do videos of the upgrades
I'm wondering what aluminum arms would work with the typhon 3s Don want to buy any and notice they don't work would the granite senton and such be the same? Or is the typhons Alitalia longer? Or are you running stock shafts?
Appreciate your time watching Kyle. GPM has some aluminum arms I believe. Was running stock shafts
bro again, great job man your vids on the 3s are a treat! mate, can you please tell me how did you zip tie fasten the 185 blx esc there? Did you have to make holes in the chassis yourself? I'm adding the 185 blx esc as well on my 3s Typhon. Would the body still fit if I just double sided taped it back in the original position where the stock esc normally screws in? Your time and help is greatly appreciated as always man! Thank you!
No the body won't fit if you place the blx185 ESC where the stock was. There are two holes in between the receiver and motor. You can mod a plastic plate piece that you can screw into those hole like an ESC plate. It's a tight spot but ESC should fit just right.
@@CommanderAstigRC man! Thank you ever so much bro, means a lot cheers!
I would have taken out the receiver box entirely to get that esc further away from motor
Did you remove the slipper clutch? If so how did you bypass?
Appreciate your time watching Gary. 4s metal Slipper clutch is intact.
@@CommanderAstigRC Are you having any problems with it coming loose? mine went bust yesterday kept coming loose then the center screen broke on me. So I drilled a hole in it and epoxied a pin through to eliminate the slip. Seems to be working ok super responsive. but idk if it will cause any problems in the long run.
@@garygolembiewski1085 I didn't have any slipper clutch issues when I had it. I did have it tight to avoid any slip for consistency.
Looks awesome brother
Always appreciate it bro. Loving this buggy so much FUN man.. how's yours? Haven't seen yours in action lately.
@@CommanderAstigRC Having feeling good lately,, haven't get out much ,,, will have them soon with the Kraton
@@operation11charlieinc hope you feel better soon bro.. you got the heavily upgraded Typhon 3S and a brand new Kraton to break in for some speed run brother.. 👍👍. Looking forward seeing you bashing/running and having fun bro.
@@CommanderAstigRC Thanks so much brother
Do you have information on the shocks, would like to upgrade my 3s. A part # and where to buy? Thanks ...Great videos :)
I wanted to know the same thing! I hope he replies...
eBay.....big bore aluminum shocks $39 all 4...I love em...just add oil....I use the gold shocks.....diff colors avail www.ebay.com/i/283867073394?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=283867073394&targetid=935083617307&device=m&mktype=pla&googleloc=9025754&poi=&campaignid=10897980225&mkgroupid=108153775340&rlsatarget=pla-935083617307&abcId=9300403&merchantid=114608936&gclid=CjwKCAiA7939BRBMEiwA-hX5JzOdVvlKKo6acorRkyYOlO83DQuVQoZukKt8pOt1VQ_3AfN635StvxoCv-wQAvD_BwE
@@redblue40rc33 got a buddy that has a granite with those shocks and he says they have been good and have taken beating in skateparks
Man she's quick on 4s!
Thanks very much bro. Loving this little buggy.
DHK shocks I see...very nice mods love what you did with this car brother and dam shes fast!!
Thanks very much bro. Yeah man .. zombie shocks doing good so far man.. going for the 26t next run.
@@CommanderAstigRC Awesome id like to see some top speeds..blow the dust off that garmin gps lets see what she can do!!! Anytime brotha!!
Lookin great bro...speed demon
Thanks very much man. She's my dedicated street ripper Typhon. She replaced my street ripper Talion since I converted it to a Notorious hybrid. Impressive little Beast.
Nice super pass love arrma rigs there pretty awesome 👍 👍 keep up the good work and I'm a new subscriber
Thanks very much bro. Appreciate the support. Subbed right back at you 👍. Same here Love Arrma.
Nice run👍. I felt like I needed more traction with my typhon, maybe I'll give the badlands a try🤙
Thanks very much bro. I definitely recommend the Badlands 2.8 it's looks awesome and tons of traction hooks up pretty good.
Very cool, extremely fast
Thanks very much bro. Appreciate you stopping by and checking out the vid. This buggy is awesome man.. LOVE it. Just watched your Typhon video too. Awesome run. 20t really wakes buggy up to Life man.. trying 26t running 4S next run.
@@CommanderAstigRC Awesome
Great build bro!
Man that looks like such a sweet rig, seriously quick and super stable with the new wide stance! Makes my Hyper VSe look seriously slow man 🙈 the stability is immense dude 👍🏻
Always appreciate it very much bro. I'm Loving this little speed monster man. She's quite quick on 4S kinda scary little bit LOL 😂. I need to pay close attention on this up close and personal speed runs coz it could get NASTY if it hits me😲😱😬. How's your MT410 doing bro? I need to take mine out badly coz it's been quite a long time..
CommanderAstig RC Yeah man defo need to pay attention 😂 I sold. My MT410 🙈 just wasn’t getting used enough and I hated having such an expensive build sat there doing nothing. I’m likely gonna replace it with a Kraton V4 once the weather improves 👍🏻
@@cbix86 oh WOW 😲. Sad to hear 😢 you let her go bro. But I also understand what you're saying.. Kraton will be an awesome and even more Beastly of a replacement for sure. My MT410 is still hanging tough and strong man.. taking her out next bash. Bash on brother..
CommanderAstig RC The tekno is a great rig but at a high cost and I’m moving house so had to let it go 😕 at least I’ve got your running videos to watch 😉
Can the 3s motor handle 4s easy or does it get hot and you only get to drive 15 min
Appreciate your time watching. Yes, it can handle 4s. But I recommend cycling between 3s and 4s from time to time since this is a 3s rated system.
Quick question, I have an ARRMA 3s #Typhon and I am wondering what Hot Racing extenders can I run for improved stability? Are they the Hot Racing Arrma Nero 17mm +5mm Wide Hex set so I can run the proline 2.8 badlands on my 3s Typhon?
Appreciate your time checking out the video brother. Hit me up on FB messenger I'll send you the pictures of what I use
@@CommanderAstigRC what the link of your FB page?
@@FLSharkdiver Crisanthony Astig RC
How you running that on 4s? Did u change any of the electronics or did u just put a 4s battery in?
Running BLX 185 6s system with metal spur.
Nice! Can you list the links for the upgrades you did?
If you read the comments? Plz get back to me with a responce. I have the same one and they told me I can only use a 3's 5000 emp battery. What 4's battery you have?
Sorry late reply. This Typhon was running an upgraded system BLX 185 6s system but running it on 4s Lipo batteries. You can run 4s on stock system. I recommend mixing it up, run it on 3s and 4s. Hope this helps.
That is the best typhon 3s to date bro,Its the only vehicle I see where alumi arms would be a benefit,keep more wait at lcg to help anchor down with all that power🤜🔥🤛
Thanks for the kind words brother. Always appreciate it. She's solid and stable so far.. loving this setup so much FUN to drive.. let's see how she does on 26t pinion.. what could go wrong.. right?! LOL 😂
New to RC cars. Just bought my nephew the base version of this same car (Brushed motor. max 30mph). I’m not sure if we got a defected unit but we can’t run this brand new car more than 4-5 minutes before it quits. The red light on the ESC flashes red, I’m assuming for overheat? Please share any knowledge on what could be wrong..
Appreciate you stopping by and checking out the video Benjamin. Two things could be going on there. Either thermal shutdown (overheated or LVC (low battery). Let it sit for a bit to cool down electronics and try again. Lastly Recharge the battery and try again. I recommend converting to a brushless system to get the most Fun out of this Typhon. Hit me up on Facebook messenger Crisanthony Astig RC. I can help you there more.
Makes sense. I’ll try what you suggested. Thanks a lot for the reply. Keep up the good work bro!
@@benjaminlam4770 you probably were running a battery larger than recommended.
What esc are you using? I just bought the 3s version and I wanna run my 4s lipos.I have a Hobbywing max 10 setup laying around and was thinking about doing the swap and selling the stock arma setup.Thx for the video.I love the setup man
Appreciate you stopping by and checking out the video brother. Was running Arrma BLX 185 running 4s.
Hobbywing Max10 is the way to go. 4s is stupid ridiculous. I camt keep it under control on 6s. Or I have to ony use quarter throttle
@@CommanderAstigRC what motor did you use?
@@snack6624 was running blx 185 running 4s.
CommanderAstig 🚀 CA🔸RC But what motor? stock motor, the motor I see in ur typhoon seems to be armma
It's a BEAST 🤯🤯🤩🤩🤘🤘😎😎😎😎
Nice upgrades bro , looks Amazing 😍
4s is very Naughty 😁😁😁🤘🤘🤘👊👊👊👍👍👍👍👍😎😎😎🤩🤩🤩🤩
Thanks very much bro. This 3sers are very impressive Rigs man.. definitely worth looking at. Great value tons of speed even on stock electronics. 4S definitely brought her to different level 😂. She's gonna be ballistic on 6S!!😂😂😲😱. Love the weight from those aluminum upgrades keeps her planted to the group mostly. gonna try a low profile tires next run and maybe 6S??😬😲😂🤞. What's the worse that could happen.. right?! LOL 😂
Are those the 3.8 badlands? That thing is a beauty!! Very well done bud!
These are 2.8 Badlands on f11 rims. Not to be confused with MX2.8 Badlands.
@@CommanderAstigRC ah I forgot they make 2.8s now! I was gonna grab those new badland 1/8 buggy wheels but maybe I'll grab these. Thanks for the help commander! I realized notifications weren't on for your channel so I turned it on so I won't miss anymore vids 👌👊
@@CommanderAstigRC to follow up my last reply I can only find those in 12mm hex 😟. You found some in 17mm?
this is so awesome big thank you from all of us 3s Typhon owners! Mate if you don't mind could you please tell me if that is the same motor that came stock with the 3s? Did you just add the 185 BLX esc to it? Thanks again mate!
Thanks so much for checking out the video brother Paul. This is BLX 185 combo Motor and ESC.
@@CommanderAstigRC so much appreciate your prompt reply and everything else man, means a lot to us enthusiasts, you're doing an awesome job! Keep up the great work and enjoy bro! thanks again!
@@paulmatheson9502 Happy to help brother 👍
@@CommanderAstigRC Bro quick question please, did you have the 2050kv motor too with that system? ..and did it slip right in as an easy swap out/ swap in from the original stock system? Thank you so much man!
@@madplan7 yes 2050 works just fine. Slide right in.
Help a Brutha out Do you have the stock motor plate or the adjustable plate.
I wanna build my platform with the 6s electronics I have here myself.
Stock motor mount should fit in most 6S motor brother. Especially the BLX185 system I'm running.
CommanderAstig 🚀 CA🔸RC
Thanks bro. I have a 3s Granite/ typhon with
6s esc and currently 4 s motor and I have the brace / body and tbone parts for making my truck a Outcast.
It’s going to have 4 cars different parts when I am all done.
Thanks for the info bro. ❤️👊😀
@@rcsendandblast1579looking forward to seeing your build in action brother. It's looking like it's gonna be one beast of project.
CommanderAstig 🚀 CA🔸RC
❤️👊😀For sure Bro. I have my own channel now and my first TH-cam vid I put up a bit ago. Arrma bash / jump vid
It’s nothing special. 😌
It’s been to long since that video. I will have another one up soon
All powered up going CRAZY. 👊😀
Bro I put that blx 185 6s system in my typhon 3s with a 21t pinion and ran it on 4s and feel like it's slower then the 3s system... I was super disappointed. Somthing has to be wrong, I put the gos on it and too speed was 46.8 mph.. the battery was a 4s 6500mah. 100c power hobby battery...WTF...any ideas why it's performance was so bad
Any drivetrain modifications to handle 4a?
Nope. All stock drivetrain.
@@CommanderAstigRC Oh wow. Is it still holding up on 4s?
@@Ajc606 no longer have this buggy.
Seems to hold the road really well. I live in the desert so I would use it on both pavement and some grass areas.
Love this buggy bro. Tons of value for the money. Hats off to Arrma.
Hi mate Iv just fitted a 185blx esc to typhon 3s with 20t pinion with 3 s motor and it’s slower than it was , can u help please
Make sure your slipper clutch isn't slipping. Right tightness. I run BLX 185 combo meaning motor and ESC. Might have to upgrade your motor.
CommanderAstig 🚀 CA🔸RC thanks for your advice I’ve just ordered 1 . Rc fam
Awesome! How has the stock drive train held up? Any issues
Appreciate you stopping by and checking out the video Raul. It held up well for me. I have no issue On-Road bashing. Off-road is a different story.
Would you be able to do some good drag racing with this setup on your RC?
How do run 4s? 3s only 🚙💨
Upgraded system to BLX185 6s system.
You have a BLX120 esc?
BLX 150
Stock motor and esc won't handle 4s power??
Can you share the parts number or parts used for this beautiful upgrade? Please?
Now I want one of those lol👍🏼👍🏼👍🏼👍🏼
Appreciate you watching the vid. This buggy is awesome! Tons of FUN great value for your money. Love this buggy.
CommanderAstig RC don’t have any rc cars.. just drones so far haha! But would love to get a couple!
@@wynnfpv I started with drones and I still fly once in a while. I'm into RC Trucks at moment.. if you try RC Trucks I'd recommend taking a look at Arrma RC Trucks. They're by far the best in terms of durability and just overall awesome experience.. you want a truck that's durable enough to start with and doesn't break easily. More running/bashing and less fixing/wrenching..
@@CommanderAstigRC yea thanks for the suggestion. I'll check them out!!
@@wynnfpv just checked out your channel and watched your latest video. You got SICK flight skills my friend. Liked and subbed ya.👍👍
Bro! Love those aluminum in that typhon u have. Can u tell mw what they are?. Please😁
Absolutely bro. They are GPM aluminum arms for the granite 3S blx.
Hey brother, just a heads up. There's quite a work goes into this build if you're thinking about going this route. Please watch this video if haven't. th-cam.com/video/r_V08MUoHsY/w-d-xo.html
Could you possibly put links for the stuff you did? I really want to truggy my 3s having trouble figuring it out
I have the spektrum 130a esc and blx 4s motor 21t pinion 0.8 mod spur metal and only doing 52 I want to go 60 70mph
Hi, are those the arrma typhoon 6s shocks on your buggy? Did u have to mod them or can u just buy the 6s shocks and mount them?
Buy and mounts them
That is looking very aggressive man, verrrry fast!!! What hex extenders did you use? Ive got the hot racing 12 to 17 ones on my granite atm and they keep snapping my axles. I wanna fit some typhon axles instead but I need to throw my wheels out more with some extenders. They drive so much better with a wider stance dont they.
Thanks brother. Appreciate it. The Typhon comes with a 17mm hex and I used the Redcat Racing Bs936 003 hex extenders plus another 1/2 from running the Badlands tires.
Link that metal spur gear please
Part #SATF257. Got on eBay brother 👍
@@CommanderAstigRC , thanks dude
Did you have to upgrade the diffs?
Appreciate your time watching the video brother. Was running Stock diff.
Some say it need to upgrade the diffs..
Amazing car! Are you running stock drive shafts? Plastic?
Yes stock driveshafts. But highly recommend upgrading to aluminum ones.
@@CommanderAstigRC any good aluminum ones to recommend ?
@@MRPB54 check out GPM and I believe Arrma themselves makes aluminum ones
@@CommanderAstigRC the arrma ones are a legend cause they seem to be out of stock all the time lol
links for the upgrades u did would be nice.
Appreciate your time watching brother. Can't list them all. GPM arms, 2.8 Badlands on f11 rims, DHK zombie shocks, BLX 185 system (motor & ESC) Tbone racing bumpers and skids.
Have you put a GPS on it yet to see what MPH you get on 4s? I just destroyed my typhon last night doing speed runs on 4s BLX 120....but my Traxxas TQi TX lost signal to my receiver and I literally watched my Typhon drive straight under my own actual car...split the front end chassis, bulkhead and shock tower
nice vid bro..
love the way you tear a round with her.lol
nice going..ant..
Thanks so much bro. Love the my Typhon 3S. I gotta get her out more often tho. Bash on brother
Can the stock ESC run a 4s lipo?
I believe it's only rated for 3s.
@@CommanderAstigRC thanks
@@CommanderAstigRC are you a filipino?
@@rrrrammmmz1285 Hindi po. LoL 🤣
@@CommanderAstigRC 😂😂😂 ayos!
You are ripping up Mister Rogers Neighborhood!
LOL 😂. She's a ripper for sure brother. With some upgrades really took it to the next level.
Where'd u get the rims and tires.
Appreciate you stopping by and checking out the video man. Got off of eBay. I still have it if you want it.
@@CommanderAstigRC hells yea....i just got a typhon 6s. I could use em big time
@@tropicthunderbolt PM me on Facebook messenger Crisanthony Astig RC
@@CommanderAstigRC just did bro. My names ron
@@CommanderAstigRC did u forget about me. Lol. I hit u up on fb
Got same 1!!! What's the fastest we can get it to go? Brush less motot
Appreciate your time watching the video Anthony. You could upgrade to a higher KV motor for more top Speed.
Can you can you send me the link to the hex extenders please
You got it brother.
Redcat Racing BS936-003 17mm Wheel Hub Fits Backdraft Models BS936-003
@@CommanderAstigRC thank you buddy appreciate your response
@@AlexGarcia-di7mf Happy to help brother 👍
Super mám ji také
Is it faster than the 6s version now?
6s Typhon is way faster than 3s Typhon.
@@CommanderAstigRC I mean since it's actually not a stock 3s
No. Even tho I had BLX 185 6s system in it I only been running it on 4s.
@@CommanderAstigRC to upgrade from 3s to 6s all you have to change is the motor and esc??
@@imserious2187 Yes. I upgraded to 6s system but I only recommend running 4s coz the gears are plastic and will strip with too much power.
Arrma Typhon is s very fast Rc car.. 😀😂😂😂👍
what motor ? TIA
Appreciate your time watching. Was running Arrma BLX 185 system.
Can this hold 4s with the stock 100a esc with cooling mods
Appreciate your time watching brother. Can definitely run 4s on 100a ESC. I recommend cycling 3s and 4s.
@@CommanderAstigRC oh hell yea thanks brother really appreciate the information! Cycle it so. First run 3s second run 4s so on and so on ?
Great Built!
Which badlands do u run?
Thanks very much bro. I'm running the OG proline 2.8 Badlands glued on f11 rims.
Wow this makes me want a 3s Typhon as well. Do you have any issues with axle breakage? Have you weighed that beast?
Thanks very much brother. haven't encountered any issues so far bro. I haven't weight this Beast the added weight isn't that bad or significant.
❤ muy lindo
Great vid! You can run 4s on this truggg?
In running an upgrade BLX 185 6S system running 4S in this video. I have ran this on 6S and it absolutely went rocket Launches LOL 😂.
Thanks brother
Add a link to Tbone racing upgrades please...!?
tboneracing.net/collections/typhon-3s/products/10098-tbr-protector-front-bumper-arrma-typhon-3s-4x4
Add a link for the rims & tires
Hows she running today
No longer have it.
@@CommanderAstigRC Thats too bad. What made you get rid of it? She ran like a demon man, absolute beast. Im watching this too many times because I am waiting for my motor, aside from that my new roller is all ready to rip 😎😎
@@RileyBanksWho too many trucks gotta make room for new ones LoL 🤣. Was having too many issues with the popping driveshafts then. Was an awesome Fun buggy. She was definitely little ripper!
Shocks looks like from dhk brand? Nice video tol..greatjob
Yes. Used to have the zombie 8e. Decent shocks not too bad. Little short for rear but mounted in inner most hole on GPM Aluminum arms
CommanderAstig RC yeah I used to have Zombie, Optimus and Maximus I ended up selling them, and got me an Arrma vehicles instead..
@@209rc7 it was a short live for the zombie, sad to say LOL 😂. Just couldn't hang with my kind of bashing LOL.. always nice to have spare parts tho..
Curious how long the 3s max difs, will hold up under 4s power. Why do all those upgrades, when you can put the 4s pack into a 6s Typhon and gear it up. Kinda the same thing....Nice build though. :)
TBH. I feel like the diffs are way my re capable than 3S man.. time will tell. Had a huge wrecked and no arms replacement available at that time so went GPM Aluminum arms route and made to work.
CommanderAstig RC, My comment wasn't meant to down play your build. Its a fantastic build you've done💪. I did the same thing to a Stampede back in the day. But as we all know, traxxas difs are garbage. The fluid would be gone after one use under 4s. 😕...love the videos, keep them coming! 🤘
@@kevink.8048 oh no bro... I didn't even think of such.. appreciate your time watching the vid brother.
Do you still have this rocket?
No longer have have her brother. She was definitely a Fun rocket 🚀 🚀.