Aftermarket Speedometer for the Xpro 2022 Vader Gen 2
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2022
- Installing a SAMDO universal speedometer on the 2022 xpro vader, as well as troubleshooting and install tips for aftermarket speedos on bikes in general
The speedo:
a.co/d/8RPZYOs
The clunky bracket option:
a.co/d/3N5yJlY
My facebook: snubfighter/
You are genius!!. I have been looking for these answers for a year now! Now, I can finally finish installing my speedometer.
You basically reverse engineered the hole wiring for the bike basically making your own wiring spec sheets that definitely some work and dedication 💪🛠️🍻💯🏍️👍✌️
Best detailed video I have seen. I have been searching this. Honestly it’s basic wiring kit adding a few power and relay wires. Now if you put the 190 I bet brown is 5th
Full guess.
Depinning and repining is always a pain in the ass. It also keep it looking factory. jegs auto parts use to have Kit's to build your own that were simple 🛠️🍻💯🏍️👍✌️
Great video worked like a charm.
is brown wire constant power for the tail light as a running light?
Its possible if you're referring to the other 9pin harness but I'm not sure, I was only working on the three connected directly to the speedo, I ignored the other 2. If your talking about the 6 wire harness for the gear indicator, I doubt it. I'm thinking it may be a power feed for the sensor or something
But if your talking the wires under the seat, I remember it being either for the actual brakes or a running light since the orange and blue wires were for the turn signals
My rear is off if I have them switched off it’s not ATR. I mean I leave the switch on all the time if the key kills it. I also have a few spare ignition cylinders. I lose my keys all the time and it easier to find the new key assembly than it is to find my keys.