Impeller is set 15 thousands degrees off the front of the case ???? I think you mean 15 thou of an inch! lol .How come you fit the set screws to tapped holes in the bearing frame/power end/ adaptor used when separating the pump casing if it sticks?, you can just use one of the casing screws you have removed. Nice rotating table tho that makes things easier
How come you didn't address total travel?
Bonjour
Je voudrais faire une formation accélérée (payante ) sur les pompes pouvez vous m'orienter ?
Merci
Any tips for removing a stubborn (stuck) impeller from the shaft?
heat it up
Use brass and a 4lb hammer had one last night
@@Posibrian Be careful doing this as there could be a trapped vapor pocket. Peaceful days to you
Impeller is set 15 thousands degrees off the front of the case ???? I think you mean 15 thou of an inch! lol .How come you fit the set screws to tapped holes in the bearing frame/power end/ adaptor used when separating the pump casing if it sticks?, you can just use one of the casing screws you have removed. Nice rotating table tho that makes things easier
big pump.....