I love my UR816C even more now ❤ Now we can use UR mixer to easily reference our mixes with direct Spotify streaming switching between DAW and MUSIC channels…. Thanks Steinberg! This is a great update 🙏
3.2 firmware update NO NEED FOR LOOPBACK In the past, the Loopback parameter was used to configure the signals sent to the computer, but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple applications on the computer. With this change, the Loopback parameter has been eliminated.
I have owned the UR22C Rec pack for almost a year but still haven’t been able to figure out dspmixfx, today I saw that there is a new update to version 3 on the site and it became even more difficult for me to understand how dspmixfx works in the new version. There are no tutorials in my Ukrainian language at all, but I managed to find your video and understand how it works, now I love my UR22C even more and again I was convinced that I made a great choice for my first sound card in my life ❤ Thank you very much
@Dom I would love a session on going from zero to hero with the UR22C (for music production). Today I simply plug a mic in and go straight to the DAW. Seems like I'm probably not leveraging it the best I could. Love the new streamer/voice call options.
This is a fantastic update for UR-C owners (including me!). But I also have an older UR824 and I'd love to see some of these updates flowing back to the older models - please?
Thank you for the free update and new tools, The only component that did not get an update was the Basic FX Suite 2.0 😟I am praying for an update soon as I want to ditch the e-licenser. Please make this happen.
The Steinberg UR22C Streaming/Music Driver is just amazing !! This replaced my use for Loopback from Rogue Amoeba. I can directly record my live performance into Quicktime.
Steinberg has done it again. I was waiting for the gate feature. I got the UR 816C, UR44C & UR 22C Now the pitch function...smh really really nice!👋👋👋👋👋❤
Important feature request! Please ad a link fader and mute channels option between Mix 1 & the Stream Mix. That means the Stream Mix is linked to the Mix 1 fader moves and mutes. At the moment its a big hassle to switch back and fourth between The Mix and Stream Mix sections for monitoring the Stream Mix. Otherwise, I really like the new update a lot.
hello sir i have updated version 3 but after that in my ipad and iphone recording effect is not recording i can just hear on my headphone can yo solve my issue please will be appreciate.
I had the same question. I think the reason is that now you have three separate drivers for only mic, DAW and Music. If you chose music for you input device in OBS, then all sour es of sounds (mic, daw, music, etc.) will play in obs, unless you mute them in ur22c app. It's kind of your loop back now. If you want just your mic to be played in OBS then you choose the mic driver, and all music that you hear will not be played in OBS
In the past, the Loopback parameter was used to configure the signals sent to the computer, but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple applications on the computer. With this change, the Loopback parameter has been eliminated.
Наконец-то! ) Раньше очень не хватало ещё некоторых виртуальных каналов и отдельного стрим-микса, а то неудобно было, когда первый и второй каналы были заняты под Loopback. Но тепеееерь! Скорей бы опробовать 😎 Спасибо за видео ❤
@@isburov Привет) Если ты обновил дрова и прошивку аудиокарты, то теперь у тебя как и в этом видео должен появиться отдельный stream-микс. Думаю, тебе нужно включить мониторинг обычного микса через наушники (нажать на значок наушников) и там уже пустить себе в уши и звук игры, и свой микрофон, и звук дискорда, а в Stream-Mix можно пустить только свой микрофон, отключив звук игры. Таким образом ты будешь слышать всё, а в дискорд можно будет отправить только звук микрофона. Также в дискорде тебе нужно выбрать нужный входной канал. Я не скажу щас точно какой именно, но ты поэкспериментируй) Потому что аудиокарта после обновления предоставляет не только один стереовход, но теперь и Voice, и Line, и какой-то из этих каналов идёт с первого микса, какой-то со stream-mix. В общем, потыкай, я думаю, всё получится) Успехов!
Тоже был рад этому обновлению, но звук именно с DAW не транслируется напрямую в OBS через канал DAW (Steinberg UR22C), только на общий канал Streaming/Line, другие каналы - Voice, Music - без проблем транслируются. Решение нашел - мьютить микрофон, либо чисто настраивать канал Streaming, но хотелось бы писать все дорожки отдельно, для более гибкого монтажа/трансляции
3.2 firmware update NO NEED FOR LOOPBACK In the past, the Loopback parameter was used to configure the signals sent to the computer, but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple applications on the computer. With this change, the Loopback parameter has been eliminated.
After the update, the mix controller on the sound card stopped adjusting the volume of music on Windows. It only works in the dspMixFx application. Help!
I use Yamaha ur22c to record video tutorials. After I finish recording, the microphone of the video content only has the left channel. What should I do if there is no sound on the right side?
When I turn on the compressor, it only affects the voice for the Streaming input, not the Input 1/2 or the Voice input. Is there a way to get the compressor to affect these as well? I want the compressor for voice call as well, not just for the stream, so AT LEAST for the Voice input, not just the Streaming input so I can send the compressed voice to the voice call (Discord, while streaming) and also record the Input 1/2 for the not compressed voice (for the local recording that I edit after the stream where I can adjust every sound source individually). So what I wish was possible it so have checkboxes for where the compressor is working: Input 1/2: ⬛ Streaming: ✔ Voice: ✔ Or however I want. Had I known it wouldn't work like this, I wouldn't have gotten this, cause the way it is now, I'll have to do some compressing in Voicemeeter like before anyway, so what's the point then?
10:14 I have a question about the Link button that sits above the mic channel in the Mixer. Why don't you turn it on? It makes the sound richer and more spacious. Or is that wrong? I only turn it on when I have a Rode NT1000 connected.
Are there plugin versions of the new effects (pitch fix, delay etc.) for us to use inside our DAWs like we can with the original effects (Ch.Strip, clean, crunch, lead, hall, room etc.) ?
Hope there is mate would need that stuff to insert in cubase myself. If not I'll probably not update just yet.. the streaming only fx need to be in the daw in this way.. I could do with the new multi compressor and delay too
3.2 firmware update NO NEED FOR LOOPBACK In the past, the Loopback parameter was used to configure the signals sent to the computer, but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple applications on the computer. With this change, the Loopback parameter has been eliminated.
Where can we find the complimentary manual which describes how to use the various mixer views in detail? From what I understand the streaming view on the mixer controls what the other side hears (e.g. on a discord call). Just don't know how to map my mic (input 1) to the voice channel. PS: apart from Mixer 1 and Streaming Mixer I also have a Mixer 2 on my UR44C what's that one about?
Guys - please help. I watched a video from 2020 on connecting this interface to your iPhone and making live-streaming to whatever platform. (No computer needed!) It said you had to turn loopback on. So, I bought the UR44C to use with my iPhone 15 (usb-c). I have all the connections needed. I can hear my mix of piano, pads, voice, and all of the effects in my headphones, but when I live stream I’m only hearing my vocals with effects (no other sounds like piano or pads). What is happening?
Up!!!!!! I don’t remember, but I’ve definitely been waiting for an answer and help for more than a month. Send instructions and use. Still no Tech support sucks and the form is also quiet
I have been looking at some different videos about the Steinberg UR816C and I wonder two things. 1, Is it possible to use two or more Steinberg UR-C on the Mac? 2, Does 32 bit recording on the Steinberg UR-C work in the same way as om Zoom and other devices where you can bring down the recording of a high clipped signal so it is does not clip?
Dom, for whatever reason, my iTop Screen Recorder doesn't not record audio from both Spectralayers 11 Pro and Cubase 14 Pro on my UR 44 C.😢 I tried to select different drivers e.g. streaming, DAW etc on Itop Screen Recorder but it still does not receive the signal. 😢 Windows 11.
Steinberg, why it’s so complicated to register and download the drivers. What’s going on Focusrite is quick and easy, I just purchase ur44c today and it’s giving headache downloading drivers and elicense 🤦🏻♂️ can’t activate my product
3.2 firmware update NO NEED FOR LOOPBACK In the past, the Loopback parameter was used to configure the signals sent to the computer, but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple applications on the computer. With this change, the Loopback parameter has been eliminated.
You talked very briefly about the reverb. So with this update, can you now *RECORD* / print the reverb effect, live, in real-time, so you don't have to apply reverb in post? I am talking about recording a video, for example, to later upload to TH-cam, and I want the reverb to get recorded live as I am playing my guitar. In other words, I want the reverb being applied in real-time to become part of the final recording, *not* only for monitoring purposes. Please advise!
I recently upgraded my UR22C software to version 3, and one of the most notable features for me was the ability to split the ASIO driver into three parts: Music, DAW, and Voice. However, when I’m working in Cubase, I find that I’m unable to select anything other than the usual ASIO driver. Moreover, when I opt for the DAW driver in OBS, there is no audio output from Cubase. I came across this video where this guy effortlessly selected the DAW ASIO driver from the audio settings in Cubase, but I’m not seeing the same option. Any insights on this issue? Thanks in advance!
Hello, I am experiencing a technical issue with my interface after upgrading to version 2.1. Specifically, when I am singing, the audio cuts out intermittently as if it is on a timer. I would appreciate your assistance in resolving this problem.
I just got my urc816C. Sounds great, but I have this issue. Everything what is coming out from my Macbook, like Cubase or Tidal is only routed to the DAW channel. nothing's coming on the Music channel. That only would not be the biggest problem, but it is only routed to the Mix1 DAW channel. Of course, I want to send this to the other mixes too. Where can I route these kinda things?
I'm somewhat kind of jealous of these features, I love how Steinberg simplified the driver choices, it makes things straightforward. Now the question is do I buy this or keep my Audient? 😆
3.2 firmware update NO NEED FOR LOOPBACK In the past, the Loopback parameter was used to configure the signals sent to the computer, but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple applications on the computer. With this change, the Loopback parameter has been eliminated.
You have to wait for the next release of this device, and maybe there will be a reduction in features from the previous series, a market strategy to reap even greater profits from users.
I have installed the update and have a Steinberg URC 22 interface, but the new drivers are not showing in the menu. I still see only the Steinberg URC22 driver. Any suggestions to see all the drivers ?
It would be really nice to get an update from Steinberg on the availability Of the UR816C and the AXR4 interfaces here in the US. Online retailers are showing these products as discontinued. Is that the case? It's a pretty straight forward question that there doesn't seem to be an answer for for some highly annoying reason. I like Stenberg/Yamaha interfaces a lot. What's going on?
3.2 firmware update NO NEED FOR LOOPBACK In the past, the Loopback parameter was used to configure the signals sent to the computer, but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple applications on the computer. With this change, the Loopback parameter has been eliminated.
You have to wait for the next release of this device, and maybe there will be a reduction in features from the previous series, a market strategy to reap even greater profits from users.
3.2 firmware update NO NEED FOR LOOPBACK In the past, the Loopback parameter was used to configure the signals sent to the computer, but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple applications on the computer. With this change, the Loopback parameter has been eliminated.
Hi i have the older UR44 HW and the main problem for me with it is that when cubase is runing i cant hear the input signal from it, only when creating a project and create audio channels and all routing to monitor the inputs ,and that’s the reason why i disabled (with a workaround) the UR extension from my computer and i use the DSP mixer even when cubase is running. does the new UR-C can monitor now the inputs when cubase is running even when there is no project opened ?
So on the new dspfx instead of loopback i would use the streammix for using my inputs for going live on instagram and tiktok? Because i have been so confused trying to set up my audio settings for streaming through my phone
when i open obs in windows there is no input "Steinberg ur22c DAW". what happened there? i have followed the step by step instructions from the installation guide. please answer, i am really crazy can't find the answer
Moin, leider habe ich ein Bug festgestellt mit dem UR 44C. Das Gerät hat 2 HP-Ausgänge, jedoch kann ich den Effekt vom ducker nur über den Ausgang HP-2 hören und nicht über HP-1. Woran liegt das? ist HP-1 PreFader geschaltet?
It's been transformed into a completely different device. I'm using UR24C and AXR4, and after watching this video I bought another UR44C for multi purpose use today. Rather the UR-C series is functionally better than the AXR4 because it has a multi-stream driver and even a guitar amplifier. It's nonsense! I hope AXR4 will also make such a drastic upgrade in the future.
I use my axr4 slaved to another interface with a better DSP mixer. They probably just didn't sell enough units to really keep updating it which is a huge bummer because it's great and it would be amazing to have this mixer on it!!!
Great video, thanks! 🙂I have a question, maybe someone can answer it for me. I would like to use the signal from the voice channel for Discord, Zoom, in-game, etc. Unfortunately, the gate doesn't work there, only the top two effects, e.g. the channel strip effect. Does anyone know if it's possible to use the gate somehow? It works with the streaming channel, but then everything else is included, such as music that is currently playing or a game that you are currently playing. Therefore, the streaming channel is unfortunately not usable for in-game, for example. I am now helping myself by redirecting the voice channel to the Nvidia Broadcast Tool and picking up the signal from there. But a more elegant and latency-free solution would be to do it directly via the interface.
May be great for streamers and podcasters but has made Cubase 13 pro crash regularly which is a shame(Midi is unpredictable). I loved it before firmware update and now after disconnecting it, removing all drivers on my Mac and using the Montage M as the interface, Cubase works perfectly. Hopefully Steinberg will look into this midi bug in the future so my UR-C 44 will not cause Cubase crashes
3.2 firmware update NO NEED FOR LOOPBACK In the past, the Loopback parameter was used to configure the signals sent to the computer, but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple applications on the computer. With this change, the Loopback parameter has been eliminated.
There is a Multi-Band-Compressor effect in the dspMixFx, and if you turn off the low band and the mid band, and adjust only the high band, then it can work similarly to a de-esser, so it can do the same job as a de-esser's job, ex.: tame the loud "S" sounds, so because of these reasons de-esser can be thought of as "High Band Only Multi-Band-Compressor".
I just noticed now that my original comment doew not appear for some reason. If you solo the Mid or the High band of the dspMixFx's Multi-Band-Compressor, then you can use it as a de-esser. If you type this into the youtube searchbar, it will give you a video that shows how it looks/works (you can skip to the last timestamp): How to create a DE-ESSER with Multiband Dynamics
Help. Chipboard effects don't work for me. An error comes up where it says there is no valid license, when I try to register nothing comes out since they were already registered earlier. What should I do?
I've gone all-over looking for the UR816-C interface and it's gone like it never came out. What is going on here? I'm in need to replace my old UR824 but all I see is UBS driver issues with these interfaces :( And the fact that is no longer available. Even their top $$$ interface is not available. Dom! is the DM3 a solid DAW interface? It uses Yamaha USB drivers. I'm also looking around for people that has used it in this way. I DO NOT want a Presonus interface of any kind.
Hi @JonteWasaPer You can get help in our help center - helpcenter.steinberg.de/hc/en-us There you can write in the appropriate forum and/or contact our support directly. Thank you!
Am I to understand that the way the mixer works has been revamped compared to previous versions, allowing you to open the mixer panel while Cubase is open? The previous version disables the DSPMixFX mixer panel and the parameters are made to be only available through the Cubase's own mixer. This behavior has always irked me a bit, it would be much easier to dial in those DSP FX from its own mixer.
I think that’s an option in Cubase settings, you choose if you want Cubase to take control over your interface so you can control your interface inputs and efx right from Cubase channel, or if you uncheck this option, UR-C will work independently as with any other daw…
please help me guys, I have Windows 10 and when I play a game with friends on Discord, they hear the actions that happen in the game through Discord. How to separate microphone sound from game sounds in discord?
This should be really useful for remote collaboration. Now it will be easier to share DAW output and screen while allowing voice comms.
I love my UR816C even more now ❤
Now we can use UR mixer to easily reference our mixes with direct Spotify streaming switching between DAW and MUSIC channels….
Thanks Steinberg! This is a great update 🙏
3.2 firmware update
NO NEED FOR LOOPBACK
In the past, the Loopback parameter was used to configure the signals sent to the computer,
but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple
applications on the computer. With this change, the Loopback parameter has been
eliminated.
Because of that I Love Steinberg
I have owned the UR22C Rec pack for almost a year but still haven’t been able to figure out dspmixfx, today I saw that there is a new update to version 3 on the site and it became even more difficult for me to understand how dspmixfx works in the new version.
There are no tutorials in my Ukrainian language at all, but I managed to find your video and understand how it works, now I love my UR22C even more and again I was convinced that I made a great choice for my first sound card in my life ❤
Thank you very much
@Dom I would love a session on going from zero to hero with the UR22C (for music production). Today I simply plug a mic in and go straight to the DAW. Seems like I'm probably not leveraging it the best I could. Love the new streamer/voice call options.
This is a fantastic update for UR-C owners (including me!). But I also have an older UR824 and I'd love to see some of these updates flowing back to the older models - please?
Thank you for the free update and new tools, The only component that did not get an update was the Basic FX Suite 2.0 😟I am praying for an update soon as I want to ditch the e-licenser. Please make this happen.
The Steinberg UR22C Streaming/Music Driver is just amazing !! This replaced my use for Loopback from Rogue Amoeba. I can directly record my live performance into Quicktime.
Steinberg has done it again. I was waiting for the gate feature. I got the UR 816C, UR44C & UR 22C Now the pitch function...smh really really nice!👋👋👋👋👋❤
I can't find the pitch fix on it with my ur22c..
great, hope you can also add the ability for dspmixfx to be controlled through streamdeck or trough midi hardware directly.
Thanks Steinberg! I don’t regret choosing you in 2019)
Not working I see the new effects but they are not working... do i need to update the i pad?... I have the latest update in
Nice update Steinberg, thank you! Also, would be useful to add volume faders for the aux outputs on the units with multiple outs like my UR44C.
Dear Domenic, its a best news in recent times, at last we have waited for a new wonderful update! Thank you very much!
Important feature request! Please ad a link fader and mute channels option between Mix 1 & the Stream Mix. That means the Stream Mix is linked to the Mix 1 fader moves and mutes. At the moment its a big hassle to switch back and fourth between The Mix and Stream Mix sections for monitoring the Stream Mix. Otherwise, I really like the new update a lot.
How I can use DSPMix with StreamDeck? Any integration plugins with new Stream Deck knobs?
Need this!!!
hello sir i have updated version 3 but after that in my ipad and iphone recording effect is not recording i can just hear on my headphone can yo solve my issue please will be appreciate.
But the Loopback has disappeared !!! Why???
I had the same question. I think the reason is that now you have three separate drivers for only mic, DAW and Music. If you chose music for you input device in OBS, then all sour es of sounds (mic, daw, music, etc.) will play in obs, unless you mute them in ur22c app. It's kind of your loop back now.
If you want just your mic to be played in OBS then you choose the mic driver, and all music that you hear will not be played in OBS
In the past, the Loopback parameter was used to configure the signals sent to the computer,
but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple
applications on the computer. With this change, the Loopback parameter has been
eliminated.
Наконец-то! )
Раньше очень не хватало ещё некоторых виртуальных каналов и отдельного стрим-микса, а то неудобно было, когда первый и второй каналы были заняты под Loopback.
Но тепеееерь! Скорей бы опробовать 😎
Спасибо за видео ❤
Братец , помоги, пожалуйста. Как сделать так чтобы ребята в дискорде перестали слышать звуки игры? У меня виндовс 10 и ur22c
@@isburov
Привет)
Если ты обновил дрова и прошивку аудиокарты, то теперь у тебя как и в этом видео должен появиться отдельный stream-микс. Думаю, тебе нужно включить мониторинг обычного микса через наушники (нажать на значок наушников) и там уже пустить себе в уши и звук игры, и свой микрофон, и звук дискорда, а в Stream-Mix можно пустить только свой микрофон, отключив звук игры. Таким образом ты будешь слышать всё, а в дискорд можно будет отправить только звук микрофона.
Также в дискорде тебе нужно выбрать нужный входной канал. Я не скажу щас точно какой именно, но ты поэкспериментируй)
Потому что аудиокарта после обновления предоставляет не только один стереовход, но теперь и Voice, и Line, и какой-то из этих каналов идёт с первого микса, какой-то со stream-mix.
В общем, потыкай, я думаю, всё получится)
Успехов!
@@karamush а можно с вами списаться в телеграме?
Тоже был рад этому обновлению, но звук именно с DAW не транслируется напрямую в OBS через канал DAW (Steinberg UR22C), только на общий канал Streaming/Line, другие каналы - Voice, Music - без проблем транслируются. Решение нашел - мьютить микрофон, либо чисто настраивать канал Streaming, но хотелось бы писать все дорожки отдельно, для более гибкого монтажа/трансляции
in version 2 , I can use loopback "live chat" record video with REV-X , how can I do this in version 3 ?
Can we change volumes of Monitor and Headphone separately from Software?
Where's the loopback on windows pls? I can't find it on 3.0 Ver. I do need the loopback function to record in DAW with backing track.
any updates on this?
3.2 firmware update
NO NEED FOR LOOPBACK
In the past, the Loopback parameter was used to configure the signals sent to the computer,
but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple
applications on the computer. With this change, the Loopback parameter has been
eliminated.
@@takaliuang Thanks. But I don't have the Voice outputs on my computer for unknown resaon...
Hello! I have the URRT2 Trying to get Dspmix to pop up. How do you activate it? Ive downloaded the basic fx Suite but nothing is happening
After the update, the mix controller on the sound card stopped adjusting the volume of music on Windows. It only works in the dspMixFx application. Help!
I use Yamaha ur22c to record video tutorials. After I finish recording, the microphone of the video content only has the left channel. What should I do if there is no sound on the right side?
OMG!!!! GUYS!!!! THANK YOU VERY MUCH!!!!!!!!!!!!!!!!!!!!
9:50 I cant hear any differences in noise backgroung sound before/after the Gate was enabled. I'm listening in my DT 770 PRO
Please provide a Windows equivalent demo and show using the UR44C with multiple inputs for zoom streaming. The current docs are super confusing to me.
what if i want to use onboard effects but no loopback while streaming?
There's no pitch fix effect on the ur22c for windows...
When I turn on the compressor, it only affects the voice for the Streaming input, not the Input 1/2 or the Voice input. Is there a way to get the compressor to affect these as well? I want the compressor for voice call as well, not just for the stream, so AT LEAST for the Voice input, not just the Streaming input so I can send the compressed voice to the voice call (Discord, while streaming) and also record the Input 1/2 for the not compressed voice (for the local recording that I edit after the stream where I can adjust every sound source individually).
So what I wish was possible it so have checkboxes for where the compressor is working:
Input 1/2: ⬛
Streaming: ✔
Voice: ✔
Or however I want.
Had I known it wouldn't work like this, I wouldn't have gotten this, cause the way it is now, I'll have to do some compressing in Voicemeeter like before anyway, so what's the point then?
10:14 I have a question about the Link button that sits above the mic channel in the Mixer. Why don't you turn it on? It makes the sound richer and more spacious. Or is that wrong? I only turn it on when I have a Rode NT1000 connected.
Are there plugin versions of the new effects (pitch fix, delay etc.) for us to use inside our DAWs like we can with the original effects (Ch.Strip, clean, crunch, lead, hall, room etc.) ?
Hope there is mate would need that stuff to insert in cubase myself. If not I'll probably not update just yet.. the streaming only fx need to be in the daw in this way.. I could do with the new multi compressor and delay too
hi please help with loopback
How to enable it? I can not find
Windows
Ur22c
Thank you
3.2 firmware update
NO NEED FOR LOOPBACK
In the past, the Loopback parameter was used to configure the signals sent to the computer,
but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple
applications on the computer. With this change, the Loopback parameter has been
eliminated.
Where can we find the complimentary manual which describes how to use the various mixer views in detail? From what I understand the streaming view on the mixer controls what the other side hears (e.g. on a discord call). Just don't know how to map my mic (input 1) to the voice channel. PS: apart from Mixer 1 and Streaming Mixer I also have a Mixer 2 on my UR44C what's that one about?
The manual is on the website, with all the diagrams
Guys - please help. I watched a video from 2020 on connecting this interface to your iPhone and making live-streaming to whatever platform. (No computer needed!) It said you had to turn loopback on.
So, I bought the UR44C to use with my iPhone 15 (usb-c). I have all the connections needed. I can hear my mix of piano, pads, voice, and all of the effects in my headphones, but when I live stream I’m only hearing my vocals with effects (no other sounds like piano or pads). What is happening?
If anyone can help me. In control panel i dont see any line or streaming mode. Only DAW MUSIC VOICE
Up!!!!!!
I don’t remember, but I’ve definitely been waiting for an answer and help for more than a month. Send instructions and use. Still no Tech support sucks and the form is also quiet
I have been looking at some different videos about the Steinberg UR816C and I wonder two things.
1, Is it possible to use two or more Steinberg UR-C on the Mac?
2, Does 32 bit recording on the Steinberg UR-C work in the same way as om Zoom and other devices where you can bring down the recording of a high clipped signal so it is does not clip?
Dom, for whatever reason, my iTop Screen Recorder doesn't not record audio from both Spectralayers 11 Pro and Cubase 14 Pro on my UR 44 C.😢
I tried to select different drivers e.g. streaming, DAW etc on Itop Screen Recorder but it still does not receive the signal. 😢
Windows 11.
what is the name of this software you open up on the computer?
why i don't have the Streaming Music driver option? only voice/daw/line
Which interface are you using in your studio on a daily basis Dom?
Steinberg, why it’s so complicated to register and download the drivers. What’s going on
Focusrite is quick and easy, I just purchase ur44c today and it’s giving headache downloading drivers and elicense 🤦🏻♂️ can’t activate my product
where is loopback in version 3 ? I need record video with REV-X .
It's been removed. Loopback is handled differently in v3
@danielayotalks how is loopback handled?
3.2 firmware update
NO NEED FOR LOOPBACK
In the past, the Loopback parameter was used to configure the signals sent to the computer,
but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple
applications on the computer. With this change, the Loopback parameter has been
eliminated.
You talked very briefly about the reverb. So with this update, can you now *RECORD* / print the reverb effect, live, in real-time, so you don't have to apply reverb in post? I am talking about recording a video, for example, to later upload to TH-cam, and I want the reverb to get recorded live as I am playing my guitar. In other words, I want the reverb being applied in real-time to become part of the final recording, *not* only for monitoring purposes. Please advise!
The confirmed answer - YES. :)
@@rombsix How do you record the reverb into the DAW ? not just for monitoring...thanks
@@manu_mx I think you have to set the recording source as "Streaming" and that should do the trick
This is awesome, i need to update my UR44C drivers, thanks for this!
I recently upgraded my UR22C software to version 3, and one of the most notable features for me was the ability to split the ASIO driver into three parts: Music, DAW, and Voice. However, when I’m working in Cubase, I find that I’m unable to select anything other than the usual ASIO driver. Moreover, when I opt for the DAW driver in OBS, there is no audio output from Cubase. I came across this video where this guy effortlessly selected the DAW ASIO driver from the audio settings in Cubase, but I’m not seeing the same option. Any insights on this issue?
Thanks in advance!
I have this problem too but in the discord. I can play game with Friends because my friends hear sound in my game
@@isburov but in obs if I select daw I can’t hear nothing from cubase
Hello,
I am experiencing a technical issue with my interface after upgrading to version 2.1. Specifically, when I am singing, the audio cuts out intermittently as if it is on a timer. I would appreciate your assistance in resolving this problem.
I don’t have a Steinberg UR22C Streaming/Music tab, can you tell me how I can fix the problem?
I just got my urc816C. Sounds great, but I have this issue. Everything what is coming out from my Macbook, like Cubase or Tidal is only routed to the DAW channel. nothing's coming on the Music channel. That only would not be the biggest problem, but it is only routed to the Mix1 DAW channel. Of course, I want to send this to the other mixes too. Where can I route these kinda things?
I'm somewhat kind of jealous of these features, I love how Steinberg simplified the driver choices, it makes things straightforward. Now the question is do I buy this or keep my Audient? 😆
Hi @tonylancer7367
We don't need to explain our opinion on your question in detail, do we? ;)
Thx! Great update. How can I use the ducker effect when my mic is not in Input 1 or 2? How can I get my Mic audio trough the new Voice channel?
SIR plse tell me please can i
Connect two ur24c in series to get delay+ reverb ,bcse i cant select rev + delay 3.0 at same time
I will buy this, since Presonus abandoned their Revelator io24. Congratulations Steinberg and thanks for this great run through.
How to turn on the original loop back function？
Well I'm also looking for that
3.2 firmware update
NO NEED FOR LOOPBACK
In the past, the Loopback parameter was used to configure the signals sent to the computer,
but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple
applications on the computer. With this change, the Loopback parameter has been
eliminated.
Installed the new software but no pitch fix on my UR22c, any ideas
The loopback is auto enable, how to turn it off on ipad?
You have to wait for the next release of this device, and maybe there will be a reduction in features from the previous series, a market strategy to reap even greater profits from users.
I have installed the update and have a Steinberg URC 22 interface, but the new drivers are not showing in the menu. I still see only the Steinberg URC22 driver. Any suggestions to see all the drivers ?
It would be really nice to get an update from Steinberg on the availability Of the UR816C and the AXR4 interfaces here in the US. Online retailers are showing these products as discontinued. Is that the case? It's a pretty straight forward question that there doesn't seem to be an answer for for some highly annoying reason. I like Stenberg/Yamaha interfaces a lot. What's going on?
So.. no more loopback ??
Loopback is not needed anymore (read the Steinberg instructions)
3.2 firmware update
NO NEED FOR LOOPBACK
In the past, the Loopback parameter was used to configure the signals sent to the computer,
but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple
applications on the computer. With this change, the Loopback parameter has been
eliminated.
I can't access the Streaming/Music driver... it doesn't show up on my driver list?
i have the same question too.I only have three options:line,voice and DAW
Where did the loopback funcion go? I cant get it going to record music in Cubase from TH-cam for example anymore. Can somebody help me out?
You have to wait for the next release of this device, and maybe there will be a reduction in features from the previous series, a market strategy to reap even greater profits from users.
3.2 firmware update
NO NEED FOR LOOPBACK
In the past, the Loopback parameter was used to configure the signals sent to the computer,
but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple
applications on the computer. With this change, the Loopback parameter has been
eliminated.
I tried updating it but it does not work, I still can't get it show me the 3.0 option
On my UR22C, is there a way to stream Cubase to Discord using the new URC software, but not OBS?
What about iPad users of Cubasis? What does this do for us?
Is there any further tutorial or a manual for version 3.0?
Hi
i have the older UR44 HW and the main problem for me with it is that when cubase is runing i cant hear the input signal from it, only when creating a project and create audio channels and all routing to monitor the inputs ,and that’s the reason why i disabled (with a workaround) the UR extension from my computer and i use the DSP mixer even when cubase is running.
does the new UR-C can monitor now the inputs when cubase is running even when there is no project opened ?
So on the new dspfx instead of loopback i would use the streammix for using my inputs for going live on instagram and tiktok? Because i have been so confused trying to set up my audio settings for streaming through my phone
when i open obs in windows there is no input "Steinberg ur22c DAW". what happened there? i have followed the step by step instructions from the installation guide. please answer, i am really crazy can't find the answer
Moin, leider habe ich ein Bug festgestellt mit dem UR 44C. Das Gerät hat 2 HP-Ausgänge, jedoch kann ich den Effekt vom ducker nur über den Ausgang HP-2 hören und nicht über HP-1. Woran liegt das? ist HP-1 PreFader geschaltet?
It's been transformed into a completely different device. I'm using UR24C and AXR4, and after watching this video I bought another UR44C for multi purpose use today. Rather the UR-C series is functionally better than the AXR4 because it has a multi-stream driver and even a guitar amplifier. It's nonsense! I hope AXR4 will also make such a drastic upgrade in the future.
I use my axr4 slaved to another interface with a better DSP mixer. They probably just didn't sell enough units to really keep updating it which is a huge bummer because it's great and it would be amazing to have this mixer on it!!!
What about the new IXO Model , ?
No DSP.
Great video, thanks! 🙂I have a question, maybe someone can answer it for me. I would like to use the signal from the voice channel for Discord, Zoom, in-game, etc. Unfortunately, the gate doesn't work there, only the top two effects, e.g. the channel strip effect. Does anyone know if it's possible to use the gate somehow?
It works with the streaming channel, but then everything else is included, such as music that is currently playing or a game that you are currently playing. Therefore, the streaming channel is unfortunately not usable for in-game, for example. I am now helping myself by redirecting the voice channel to the Nvidia Broadcast Tool and picking up the signal from there. But a more elegant and latency-free solution would be to do it directly via the interface.
May be great for streamers and podcasters but has made Cubase 13 pro crash regularly which is a shame(Midi is unpredictable). I loved it before firmware update and now after disconnecting it, removing all drivers on my Mac and using the Montage M as the interface, Cubase works perfectly. Hopefully Steinberg will look into this midi bug in the future so my UR-C 44 will not cause Cubase crashes
When can we expect a better Steinberg audio? AOmething that can rival Focusrite, Audient and SSL
Tell me how to enable the Loopback function now?
Loopback is gone since it is not needed anymore (read the Steinberg instructions)
@@JohnnyBEWork bit this is a problem. Because i can't play game with my friends on the discord. My friends all time hear sounds in my game
3.2 firmware update
NO NEED FOR LOOPBACK
In the past, the Loopback parameter was used to configure the signals sent to the computer,
but now the Streaming, Voice and Input1/2 outputs can be output individually to multiple
applications on the computer. With this change, the Loopback parameter has been
eliminated.
NEED THE DE-ESSER!!
Isn't the high band of the multiband compressor up like a de-esser?
@@kaisfp ???
There is a Multi-Band-Compressor effect in the dspMixFx,
and if you turn off the low band and the mid band, and adjust only the high band,
then it can work similarly to a de-esser,
so it can do the same job as a de-esser's job, ex.: tame the loud "S" sounds,
so because of these reasons
de-esser can be thought of as "High Band Only Multi-Band-Compressor".
(PS. In my first comment I wrote "up" instead of "work", I don't know why :), sorry)
I just noticed now that
my original comment doew not appear for some reason.
If you solo the Mid or the High band of the dspMixFx's Multi-Band-Compressor,
then you can use it as a de-esser.
If you type this into the youtube searchbar, it will give you a video that shows how it looks/works
(you can skip to the last timestamp):
How to create a DE-ESSER with Multiband Dynamics
Help. Chipboard effects don't work for me. An error comes up where it says there is no valid license, when I try to register nothing comes out since they were already registered earlier. What should I do?
Hope that don't happen to me I'm supposed to be updating tomorrow
Hi, is the ur22c with ios 17.5. compatible?
Are you running your Mac with the apple silicon chip? How about compability with the apple silicon Mac’s? Is the UR-C tools natively supported?
Yes, but you need to follow the installation guide, it explains a lot
Looks great, but are all these functions available on both pc and mac?
Yes, for sure! :)
How do i record the effects into daw?
UR12 ?? any chance under Windows ??
how can I bind a voice changer to a hotkey?
How to use it as an insert?
thanks steinberg
I've gone all-over looking for the UR816-C interface and it's gone like it never came out. What is going on here?
I'm in need to replace my old UR824 but all I see is UBS driver issues with these interfaces :( And the fact that is no longer available. Even their top $$$ interface is not available.
Dom! is the DM3 a solid DAW interface? It uses Yamaha USB drivers. I'm also looking around for people that has used it in this way. I DO NOT want a Presonus interface of any kind.
I have installed the update, but can only see one driver for the UR-C 44. How to get all three visible/installed?
Hi @JonteWasaPer
You can get help in our help center - helpcenter.steinberg.de/hc/en-us
There you can write in the appropriate forum and/or contact our support directly.
Thank you!
Thanks, I did that. Will try again.@karlkaos
Great update! 🥳🎉Thanks a lot, dear Steinberg!🫂🤝
What if I'm streaming but also active in a discord voice channel or twitch stream together?
11:05 Do you really have that feminine voice when you sing, or is it done with the Pith Shift of some plugin?
Am I to understand that the way the mixer works has been revamped compared to previous versions, allowing you to open the mixer panel while Cubase is open? The previous version disables the DSPMixFX mixer panel and the parameters are made to be only available through the Cubase's own mixer. This behavior has always irked me a bit, it would be much easier to dial in those DSP FX from its own mixer.
I think that’s an option in Cubase settings, you choose if you want Cubase to take control over your interface so you can control your interface inputs and efx right from Cubase channel, or if you uncheck this option, UR-C will work independently as with any other daw…
please help me guys, I have Windows 10 and when I play a game with friends on Discord, they hear the actions that happen in the game through Discord. How to separate microphone sound from game sounds in discord?
Лучшее обновление! Спасибо!
Well this is very nice
Please make a gate effect for your old users Steinberg ur44 & ur242😢😢😢 The filling allows this.
Thx!!! Great update!!!
How glorious!!!!
Thank you !!!