11.5 Mph on a KAYAK! Stable High speed Electric Kayak Motor! LAKE TEST fail and SUCCESS!
ฝัง
- เผยแพร่เมื่อ 11 ส.ค. 2020
- Check out our instagram for the Speed test results with a 220lb person and a 160lb person! 2goodoftheland
The charger: www.banggood.com/custlink/vvv...
amzn.to/2PJg9u9
The Batteries: www.banggood.com/custlink/KDG...
The motor. Word of warning! Im still testing this thing for longevity under water! there are other options coming up! amzn.to/3axYtv4
Build your own battery!
The Waterproof connectors: amzn.to/3iB9K0w
Propeller:kenzenrcthruster.aliexpress.c...
Get your dirt cheap batteries here!
www.batteryhookup.com/?rfsn=3...
Silicone work mat.
amzn.to/2CubAjH
So much power!!!!
goodoftheland on Instagram
#restoration #oldiron
Follow MR COOL on Facebook! / mrcoolcomfort
If you want to learn how to install a MR COOL Mini split check out my install video!
• MR COOL DIY MINI SPLIT...
Don't work in the heat! Cool your shop wit the easy to install Mr Cool DIY unit.
800 sq foot shop model
amzn.to/2L9ZJIS
1000 sq foot
amzn.to/3ftKsjU
1
200 sq foot
amzn.to/3b8sEHO
Learn more about MR COOL here.
mrcool.com/
Brass punch and hammer set.
amzn.to/2CubNmZ
Support the channel here!
www.subscribestar.com/gotl
The stuff I use for the restorations!
This is the ultimate in rust prevention! CRC SP_400
amzn.to/2CtlgZL
Get your Evapo_rust here!
amzn.to/2BtwJdG
Cheap Engine Degreaser evaporates QUICKLY! Save yourself some money, and get the good stuff that I use here: amzn.to/2Insi3i
Want the ultimate RUST-PROOF finish on your steel without painting? This is the stuff I used on the Blower : amzn.to/2Io7yZk Gallon
Quart: amzn.to/3dfhnGB
Want the best penetrating lube on the market? amzn.to/2Inhsu2 Don't take my word for it. Watch this test video from Project Farm: • Penetrating Oil Showdo...
Dollar for dollar, Knock'er Loose wins every time.
Protect EVERYTHING against rust! Here's the CRC SP-400 that I trust to protect my work: amzn.to/2NLrUlb It's cosmoline in a can! - บันเทิง
After everything going on in the world right now the smile on your face was absolutely worth watching this video
Absolutely amazing. The world of kayaking is definitely changing. Thanks for sharing it.
Ç😊😊😊
I've powered 3 fishing kayaks over the past 5 years. Two using trilling motors and the last powered with a 9.9 gas motor.
I had to build custom mounts (all mounted at the stern) for the motors, and never used over 1/4" 6061 plate I never had any bending or distortion of any kind.
You need to make this a KIT for us to buy !!!! Want to make some great money build the kit start a business and get this out there... people would buy this NOW
I concur
Yes please
Agreed
Ready to pay today
@@thinkaboutit9891 fax
I hope you include a total full power run until reaching safe voltage cutoff so you determine the usable time of the unit. As an experimental platform. the second one should have upgraded hardware to clean the kinks out a bit. Looks good so far. Good job.
I'm raising money to fire him into the sun on the first Ugandan space flight
Absolutely amazing, quality work you did there. Nicely done
Wow! Great conversion!! All the benefits of electric power and a fun way to get to more fishing spots. Great job👍👍👍
Good job.
But I must tell you when it comes to propelling a kayak the KISS rule applies. The more electronics you introduce on the water the more problems you will have. Electronic speed controls and motor drives will fail , if not from stress when prop gets fouled with weed or shallow water , corrosion will destroy them.
I learnt this the hard way doing what you have done. In the end I fitted an off the shelf 12Volt brushed motor, 50 lb thrust , steered the kayak with the oars , fitted marine grade circuit breaker in case of prop fouling. No more problems, easy to maintain. Keep it simple on the water. Do more fishing than cruising.
I prefer to use Lead Acid Battery over Lion . When Lion battery reaches low voltage state it just shut off, Lead Acid Battery will keep prop turning on 12Volt motor even at 6 volts, will be good enough to get you home without paddling.
He's using lipo's which are so unbelievably much better than lead acid that I can't believe you even mentioned Pb acid. As little as 2 years ago, 8000mah lipo's would've been probably $250 each but they're cheap now. And the best thing about lipo batteries, when they die you take a nail gun and shoot a nail through the battery, shorting all the cells together, stand back and watch the show!
@@mboyer68 ,
I will look into the “lipo’s “ now...
@@mboyer68 trash.. Pure trash
Amazingly cool build, I’m so envious!!
Such a cool build. I was in the seat when you opened her up and the first thing in my mind was wondering about the steering being fluid enough to turn without turning over.
That looks like the hell of a lot of fun.
that smile bro, i was the same when i built v1, now I'm building a v2 with more power bigger prop and customising the whole rear end of the kayak to look like nothing on this world haha but the stability has gone thru the roof, i will be able to stand whilst in motion. good job on the build by the way
"This is as fast as Im ever guna drive....." Yeah RIGHT! 😂😅🤣🤣
Not bad. I dont know how much cooling you need but when I did model boats we installed a water pickup angled off the drive prop to cool the engine and had the exit off the side of the hull so you could see it running. It may be an option for your project.
This would be great!!! If he didn't do this he needs a radiator and fan in the loop on his water cooled ECU!
It may could clog up the fins if there are any in the ECU cooling block. CPU coolers have fins. Idk if that does. If it does use a corrosion inhibitor and a radiator and fan. Your build will last and not have over heating issues. Good luck
PC cooling hard Ware is your friend. I would use a 240mm radiator. You could get away with a thick 120mm rad with high fin density.
Also the feeling of zooming in a kayak after the hard work is one of the best I definitely understand why you couldn’t stop smiling feels like you got two giant outboards on there
Not an engineer or tech guy but LOVE ALL use of Electric! It will get you there!!
Anything that puts a smile on your...
Thats what lifes all bout
I love it! I love messing around with motors and electricity. I really love how you now get the Tesla effect in your kayak. lol You can't punch that motor without smiling!
What a crazy idea man! It might look ridiculous but is actually genius. Kayaks with a motor takes them to another level
I'm definitely building me one this winter thanks for the inspiration
Anytime you can create a wake in a kayak you were going somewhere fast. Great build 👍and tight lines
what a crazy invention, man😲 you need to patent this... Awesome
Its not new people are already selling a way better motor not in water kits
@@bgi142 Yet you don't provide any links or info. 🤦♂️
@@hugoh.9694 yea Google it dummy its a jetski motor propeller water intake wthat makes the motor be able to be out of the water way better than this fools prototype
It's always the loudest guy in the room that wrong. It's Jetski impeller, not "Jetski propeller" They are far less efficient than a propeller requiring dual motor and a ton of batteries. Click this link and watc the full video for more details.
th-cam.com/video/Dkk9gvTmCXY/w-d-xo.html
@@TK-oe1xm yeah. Okay. Let me just Google "way better motor" since that was the extent of the info you provided. Admit it. As my dad would say... your original comment was about "as useless as teets on a bull." And I'm the dummy. Lmao. Okay. 👍
Success! thanks for sharing your amazing journey with us!
Ah ha! I just a kayak with a trolling motor. I was thinking to myself, lipo brushless rc gear would be the go and there you are. Good work mate!
Its awesome Bro!!!
Respect from Europe Hungary :))
Decent! Maybe streamline the vertical shaft like an outboards prop shaft casing , it would also work like a rudder for steering without power. Great vid buddy
This is epic! I can't row like I used to but have been DYING to kayak again...definitely going to look into a mod like this!
That is awesome, and overbuilt in a good way. I just spent the afternoon making a trolling motor mount for my kayak, All heavy wall metal electrical conduit. I re-angled the rod holders and it slips in tight with no wobbling or play. One piece welded unit. Still keeping the paddle, just in case.
That's some heavy duty brackets. Should handle about 500 hp sir. Nice work
I know that bracket is way over built but looks good
@@williamglenn442 nice for sure. How I like things built.
@@williamglenn442 better too much than not enough right? Nice work sir
Holy Moly...that's nuts...now I'm pricing parts
I love watching people making stuff just for the smile factor. Well done!
It’s so good to see someone pioneer someone something new
Don't need machine tools. You would be suprized what you can build with a hacksaw, grinder, drill, and file.
that's all I needed for my kayak build and I'm only using the same for my v2
When you punch it, the smile on your face says, "Christmas morning!"
Like watching somebody shoot a full auto machine gun, uncontrollable instant smile no matter who it is!!
What lake is that? Beautiful.?These boats scare me around here too many gators. Great Job!
Dude has skills, so fun to watch!!
Nice work dude I have seen a few other electric motors out there and Ive always been curious on how much more speed you could add onto them.
I’m not sure, but I think you made a trolling motor? With lithium ion batteries?
I never thought I would see a kayak go fast enough to be up on plane. Wow!
1 A MORTE DE DIMAS - O PROCESSO DE DESENCARNAÇÃO - th-cam.com/video/saWecab-7Tk/w-d-xo.html 2 Morri e Agora? Áudio Livro Espírita th-cam.com/video/ajzzl9xgwyM/w-d-xo.html 3 Semeando e Colhendo - Contos Reencarnacionistas th-cam.com/video/wofFJWCx9uo/w-d-xo.html
4 Minha Vida na Outra Vida - th-cam.com/video/IdapEnq65Zo/w-d-xo.html
5 Dois goles para três th-cam.com/video/z5WMP25Fz0s/w-d-xo.html
6 A Reencarnação de Segismundo th-cam.com/video/4QYVPG5d7bs/w-d-xo.html 7 Sempre contigo senhor Jesus! th-cam.com/video/NwfpqRp3xRU/w-d-xo.html 8 Hora de desfazer os grilhões mentais de espiritos das trevas com a humanidade th-cam.com/video/cpXcqqMDn0M/w-d-xo.html 9 O Vôo da Esperança 1/2 th-cam.com/video/7Vqvrvck7ho/w-d-xo.html 10 Agnus Dei ♪ Alleluia th-cam.com/video/2Kl8_eLqXnQ/w-d-xo.html 11 Agnus Dei ♪ Alleluia Jotta A th-cam.com/video/y4LUcEcqbCw/w-d-xo.html 12 Canalização com Akhenaton/Reunião alienígena,a entidade Jeová, Moisés, Elias e Eliseu. th-cam.com/video/aTa49CE9r-U/w-d-xo.html
I know, how cool is it to see a kayak pass a gas outboard, lol
You know you fully succeeded something when you have a smile on your face like that haha this is so awesome!
Bought 2 kajaks 2 years ago, used them only once. (Not enough horse power.) After seeing this, I think I am going to try modifying a trolling motor... I think you did a great job, it looks awesome...
Hey Justin, you should lower the propeller "as deep as you can", it raises the water column (water pressure) above/behind the propeller, reducing the chance of cavitation around the impeller blades (power losses).
Great project!
Regards from Brazil!
What? Ventilation is not cavitation. A simple "fence" would stop the intrusion of air into the propeller. Fact, you raise an engine to get more speed. Sorry my friend.
@@gingerkitty1374 Do you know the boiling water temperature at the top of Everest? In Celsius, for obvious reasons.
@@ww07ff generally, anyone with "kitty" in their name is a moron ;)
now i wanna give my outboard a 10M leg...
They are called solder sleeves! I use them on the A10 all the time! Nice to see a link where you can get decent ones on the open market!
A10 meaning like A10 warthog.. Aircraft?
@@MrMd5555 👍yes sir
@@trialnterror well that's about the most badass thing I've heard all day. I've always loved jet aircrafts from a young age & the tank buster was always at the top of my favorite list
Actually i use them at work and we order them as "solder ferrals." I know its spelled wrong. Just thought they should be called what they are. Have a nice day. Awesome video.
Looks like Chesapeake bay from my holidays in 1989. Great work, nice build. Battery/more weight in the front helps with aquaplaning for my rigid boat. Efficiency curve always crashes at a certain point, about 20 mph in the case of an ebike.
Wow...amazing. I'm blown away. Great job, great vid!
"That's probably fast enough right there!" ..... Cranks it up and cranks the Grin up too!
+Dave W 😁
Love your work brother, you have inspired me to do something similar to my kayak.
I’m looking to run approximately 90 volts with a huge 720 phase amps controller.
Looking to have a lot fun with it but mostly using it for slower speed trolling and fishing.
I current setup is only 5 horsepower which is quite primitive in design but still a lot of fun.
Can’t wait to install the big system this weekend.
All the very best to you and your family.
Should show in video would be good to learn from
That look when you opened it up beyond 4 mph had me going too!
Those solder connectors are an actual game changer! Way faster and easier than traditional soldering and they aren't expensive at all.
Awesome work, I've really enjoyed this build, thanks for your trouble, fantastic result. I need to find a motor I can run in saltwater without it corroding then get building something similar.
We are actually building some for Garmin right now we have a fresh water and saltwater version in development
@@Apparition_Unknown Look forward to seeing more on that. Such a shame this series of videos here appears to have been abandoned though, I was really enjoying them.
Awesome work buddy!! I do high speed rc cars. (120-150mph) the sss motor in your video works great. If you want more power run two of them this will allow you to use even larger props by splitting the load. Not sure how you could mechanically mount two on there but all of the high speed rc boats run twin motors on twin seaking escs. You would literally almost your mph
Hell yea 30mph would be my goal atleast 🤣
Simplemente perfecto. Este soporte motor está muy buen fabricado. Enhorabuena!
Well done mate-great build.
Success!!!!! Awesome... LOVE IT! Congrats, Justin!
Demolition ranch’s dad ?
Yup
Sweet ride! I would love to know the current draw at various speed settings. Good luck with your further development.
+William Fraser That info is on the way!
Tem kit a venda ?
Id be smiling too. Thats awesome speed in that hobie. Love it!
Love your craft man! Been thinking what motor is good enough.. been thinking to use a OB motor.. now you have given me a different idea!! You rock!!
You're some kind of monster garage kind of genius! I have 100s of ideas and you could make them all come to fruition. Great video
have you explored any of your ideas one year later?
@@Spud620 I'm constantly making things from nothing or making things better. Whatever I can do in my free time.
@@robertbragg9364 sweet! glad to know you're chasing those ideas
@@Spud620 I appreciate that. Some people enjoy sports but not me. I wanna know how everything works, how to fix everything and I fix things for people as often as possible. I had to go back to work for someone else because working for free constantly doesn't pay the bills. Ill always fix and create things as often as possible but for now I have to be an adult and be responsible. Whomp whomp whomp
@@robertbragg9364 I’m much the same. Ideas just flow from my head like a burst dam it’s pretty hard to find the balance between dreaming and living. I hope everything will continue to be alright for you
That thing will be nuts with the higher voltage packs! Considering the amount of draw on that controller, you might want to make a heat exchanger out of an old heater core or something, so you can keep it submerged. That water bottle is going to get hot in a short while and burn up your nice 300 amp controller. I think you might want to invest in a better pump also. Those washer pumps are made for intermittent duty, so they won't last very long. If you can find one from an old water cooled computer setup, they're quiet and made to run continuously at 12v. Can't wait to see more on this!😁
A D5 pump
That thing is frickin awesome! Man, I give it to you for successfully pulling it off and finding ways to make it better. I tip my hat to you sir!
Pretty cool Justin, I mounted twin 55 lb, thrust trolling motors on my kayak, each motor has it's own battery supply and the batteries are Dakota Lithium Ultra light weight. My top speed with this setup is 11.7 knots. I did add a pair of Wave Armor outriggers to give me more stability and those outriggers really do their job, very stable ride.....
If you were using a planing hull instead of a displacement hull (like all kayaks) you could double your speed and reduce power requirements.
I think fundamentally changing the design of the boat kinda defeats the entire purpose...
Yea a solo skiff hull is what you need to plane out
You should get a shirt that says.
"Makes me happy"
The thickness of your material is big enough for a full size outboard. Awesome work
Love this and youre a genius. Ive donated to your gofundme tonight. You make me wanna get up early and fish but we dont have marlin here so i dunno what im gonna troll for with this but it will make my fishing time more productive to get to my spots faster and make wind a non-issue.
dude, your machining is clean af.
nicely done
Just a heads up if you plan on continuing with this without ELECTROFISHING. I would advise to protect against Ingress of any sharp sediment settling between the rotor and the stator which will strip the winding coating. This will cause a massive short which could potentially hurt you considering you plan to run a higher voltage. Please stay safe.
Do you know where I can purchase one of those?
Lol ELECTROFISHING... could it be dangerous?
@@phantomdoesgames Take a look in my channel
Vladimir Herceg what’s the worst that could happen
Big Pete I hope you’re joking.
LOOKING FORWARD TO THE UPDATES…GREAT JOB!
Great build, thanks for sharing.
Great video! Most impressed by your level of knowledge, intelligence. A vitamin bottle! Go work for nasa. Great job!
That's a lot of aluminum. I bet that mount could hold a cummins lol 💪
Yeah, I thought Chevy 350.
Def could be lightened up a ton. Lots of lightning holes would help a lot.
Grossly over engineered compared to the strength of the Hull material that is soo over the top, just my opinion
I would say under engineered,over built. I don't have the skills to calculate stress loads so that issue is solved by not having to worry about it. Probably didn't see the video where I collected the material but it was $6 from a scrap yard and the final weight of the bracket itself is just over two lbs. Not bad for a backyard diy project.
@@TheGoodoftheLand no problem with building something stronger then it needs to be I was being honest when I said I bet it could hold a cummins with it being that strong a couple some supports to it and it could hold what ever power you put on it as long as it doesn't tear up your kayak
I like that mount with contact points on 2 different planes. What is the wattage it takes to go 11.5mph? Do you know of any tandem boats that'd have mounting points similar to yours ?
I liked it. That really looked good. Thank you for sharing your video and your info with all of us. Fantastic the way it all turned out.
When you get this all sorts out I would be very interested in purchasing your plans/kits/systems for my yak! I have far more trust in your method than the mass production manufactured cheap crap being offered these days.
I’m interested to know the total cost?
Those brackets he made would be pretty expensive to buy cause he made everything out of slab Al
Edit: that custom transom he fabbed would be veryyyyyy expensive
+Ryan Bernard Check out the previous video. The aluminum was $6 at the scrap yard. That is the only reason it is so thick.
Smart Guy with access to tools and the talent to make them work together 👍
I would love to see a twin motor set-up and have races with others. Could be a new race scene if enough people get interested. Open Class Races.
"Lets see how it compares!"
Translation
"Lets see if my 1 occupant lighter kayak with an electric motor can beat your aluminum flat bottom with 3 occupants and a 5hp motor!"
Hm, im 26 seconds in and im anxious with anticipation of who is going to win this race!
I can see Hydrofoils in the future :D
+Sparky Projects Sparky ,you are a wizard! After this video I added one.
Incredible dude, and yes if you could get up on plane I don't see any reason not being able to do 15 mph or better. Good luck with it. You and the family stay safe
was so glad to hear you give zoffinger a shout out
it is a great setup. The kayak is a nice slim hull but it is made as a displacement hull. the reason it will put the bow up is because it will try to climb out of the hole in the water made by the kayak itself. A displacement hull will have nice lines to let the water flow around the hull with as little disturbance and waves as possible. Each hull has his own parameters and with them it is possible to calculate the specific max hull speed for that hull. Adding more power only will result in a higher pitched bow and higher wave making and bigger fuel/amp consumption. I am pretty sure that in case you would make a light planing hull and mount this motor that it will get up, start riding on top of the water (planing) and go much faster compared to the kayak. have a look at this:
m.th-cam.com/video/i65mI8jA96w/w-d-xo.html
maybe you will understand the difference
Yup, that is correct. With the exception of this kayak being a displacement hull. The top speed in this video is 8.5 mph. In the video dropping today the kayak hits 11.5 mph. The calculated top speed of my kayak as a displacement hull is 4mph. The displacement hull calculation is a rough estimate based on actual rounded true displacement hulls. Most fishing kayaks have have a flat bottom in the center for stability and some elevated chines for tracking. My particular hull is perfect for getting on top of the water with the exception if the rear of the boat where the boat tapers to a point. The water is not supporting the rear as it climes out of its own bow wake. This causes the front to pitch up. Not near as much as you would think but it is a problem. As you will see in the next video I overcame this with a small hydrofoil just above the prop and the boat hit plane at 11.5 mph.its able do do this because it is a hybrid hull. The test was cut short due to a manufacturer defect so we only have one run on this setup but it was enough to move forward and design a true efficient hydrofoil. The cool thing is we are running at about 1/3 of the rated power capability of the electrical system. It's going to be interesting to see what happens at full power with less resistance from the water. My goal was 10mph. At this point I'm excited to see the top speed. The boat is incredibly stable and controlled at speed and can handle alot more power.
Hope this helps. Thanks for watching, much more to come!
A Perception Triumph 13 Kayak would work great with a motor. They cut through waves like butter.
when do you start putting them into production.....i want one.
@@owenair8242 can you send me the link....thank you
Nice job Jason. I never saw a kayak making a wake! I guess the next thing will be to see if you can waterski off the back!
I've been looking for the thrust mount in the video, is there a link where you got it ? I've got a Turnigy large brushless motor that I'm ready to start for my kayak monster motor.
Once you get it figured out you need to sell them. This would turn my canoe in to a rocket.
Adam Weintraub I would buy one
@@JettJohnson4 ditto
I’ll get one!
@Mik Wri I'm surprised the Chinese haven't made one then. They love going after overpriced stuff and making it cheaper.
Ill venmo cash for a trolling motor kit.....maybe utilize and old m8nkota as framework
Is the thickness of plate wayyyy over kill?
Definitely, but is great if happened to have it around and avoiding spend more money and time!
U could mount a 50 hp outboard to that thing holy f#%k
Nah man.
1) Overkill is overrated
2) Moderation is for cowards
😂🤣
Sweet homemade trolling motor bro!
A buddy of mine put a saltwater trolling motor on his small boat, it was soooo fast.
Wow your a genius man, the engineering you just did was really amazing. 😁
Surprised it didn't sink by the stern. Overkill taken to Nth degree, next one you should cut the thickness by at least half! You not putting a V8 outdrive on your kayak.
Its aluminum. The entire thing weighs five lbs. The battery is less than 10. This kayak can carry 450 lbs. The material used is certainly overkill but it plus several other pieces were picked up at the local scrap yard for $6. Can't beat that price for a prototype. I'm with you in thinking the ones made available for purchase could be 2/3 thinner.
guys have a internal combustion engine on their boat and they call it a motor. Guys with a motor on their boat call it an engine.................. lol
Spinny boi?
It's like, Park on a Driveway but Drive on a Parkway
The drone footage cut at the end with outro music...perfect.
This video was so much fun to watch! Fastest Jackson on the planet. Thanks!
Elon Musk (Tesla) just called...🤑
I can imagine you never have to excercise again.
luckily there is this diet called KETO so you can drop down to your natural body weight without excercise :)
Super cool man! thanks for sharing!
Very cool project! Love the rudder. It's very clever.
Perfect work! Good luck and all the best!
Dude, that is really awesome all that hard work paying off for you.
Having too much fun again!
Cheers, Gary