Ellipse By Eccentricity Method or General Methid//Conic Sections //Engg. Drawing //Engg. Graphics
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- Edited by YouCut:youcutapp.page...,
Ellipse By Concentric Circle Method: • Ellipse By Concentric ... ,
Ellipse By Parallelogram Method: • Ellipse By Parallelogr... ,
Ellipse By Arc Of Circle Method:
• Ellipse By Arcs Of Cir... ,
Ellipse By Rectangle Method: • Ellipse By Oblong Meth... ,
Ellipse By Four Center Method:
• Ellipse By Four Center... ,
Parabola by Eccentricity Method: • Parabola By Eccentrici... ,
Hyperbola By Eccentricity Method: • Hyperbola By Eccentric... ,
Parabola by Eccentricity Method: • Parabola By Eccentrici... ,
Parabola By Tangent Method:
• Parabola by Tangent Me... ,
Parabola By Oblong Method: • Parabola By Rectangle ... ,
Parabola By Parallelogram Method: • Parabola by Parallelog... ,
Hyperbola By Eccentricity Method: • Hyperbola By Eccentric... ,
Hyperbola By Orthogonal Method: • Hyperbole by Rectangul... ,
Hyperbola By Oblique Method : • Hyperbola By Oblique A... ,
Hyperbola by Assmtotes Method: • Hyperbole By intersect... ,
CyCloid video link: • Cycloid// Engineering ... ,
EpiCycloid: • EpiCyCloid ,
Hypocycloid: • HypoCycloid//Engineeri... ,
#engineeringclasses #engineeringclasses#b.tech classes
#Computerscience
#it #engineering graphics playlist
#graphics
#civilengineeringclasses #engineeringdrawingclasses #mechanicalengineeringclasses #electrical and Electronics classee
#electronics #Instrumentation and control systems
#onlineengineeringclasses #onlinebtechclasses #engineeringdrawingclasses#engineeringgraphicsclasses#onlinegraphicsclasses
#engineeringclasses #instrumentationandcontrolsystemsonline #mechanicalengineeringclasses #onlinemechanicalengineeringclasses #civilengineeringclasses#onlineengineeringclasses #onlinebtechclasses #engineeringdrawingclasses#engineeringgraphicsclasses#onlinegraphicsclasses
#onlineengineeringclasses #instrumentationandcontrolsystemsonline #mechanicalengineeringclasses #onlinemechanicalengineeringclasses #civilengineeringclasses #onlinepolytechnicclasses #onlineiticlasses
#onlinegateclasses #gatemechanicalclasses
Now I clearly understand the CONCEPT , madam
Thank you😊😊😊
Madam why you are not my University Teacher 😢
Anyhow, I'm teaching u through videos. 😊
Thanks mam seriously very very thanks today i got conic section perfect and detail understand by u
Good.
Explanation is too good mam..... anyone can understand easily
Mam now i got clear view about how to draw an ellipse perfectly, the video was very useful thank you mam
Good.
Explanation is excellent
Thank you mam for your efforts ☺️
Tq madam explaining super 🎉
superb teaching mam😇😇
Why should we take 45⁰ angle mam in some problems it is not necessary but this one why is it necessary can you please explain why?
We r creating a right angle triangle I. e(45°,90°,45°.)after marking Focus, whatever length of the ellipse is equal to height of the triangle. Both height and width is equal at 45° only. That's why taking this angle.
Mam very thank you.i was studying good by you mam ❤
It's nice.
All the Best for your Future.
Good explanation madam 👍
Now we don't need sir in class , Until we have madam 😁
Nice teaching mamm
Thank you Nandini.
Thanks a lot mam your explanation is amazing and clear 😊
Thank you.
Clear explanation ❤
Super explanation madam😊
Thank you.
Plz make all videos related to EGD
Check All EGD videos in the playlist.
Mam please make video on all topics
Thank you mam i was studying for my exam its very useful 🙂
Thank you maim👍
Tq so much mamm❤
What is the number of French curve you have used??
There r tree types, only first one is using here.
Eccentricity line and 45° line doesn't intersect eachother mam, what to do?
Draw according to procedure as I did.
@@engineeringclassesbydr.noo3377Thx mam, I perfected this now!
Sriram Have u got perfect diagram now?
Mam the 10 point which is drawed in axis should be equal
We can take equal or unequal. It's our choice. For good appearance we need to take equal distance points.
Mam can you give important questions for mids and sems for colleges affiliated by jntuh
Whatever I. Kept the videos of engineering Drawing, those r important for jntuh mid& sems. See those questions according to your syllabus.
Thanks 😊
Mam you have to join in Malla Reddy college
Sure, recommend to your Management.
@@engineeringclassesbydr.noo3377 mam you are really good teaching mam when I saw this video i really feel good and at first time only I will get understand mam pls do more videos mam ❤️
❤
4:15 why 45°
At 45° ,the remaining length of ellipse is equal to height of the right angle. U can see clearly at 45°, we r creating a right angle triangle. At 45° width of triangle is equal to height of triangle.
@@engineeringclassesbydr.noo3377 thoda thoda smjha
Mam what if it is 30 instead of 50 and eccentricity is 3/4? Then how to mark the vertex V🤔
For solution watch this:th-cam.com/video/tGW9vVhtcDs/w-d-xo.htmlsi=I9hvuuI-FtK8DDEE
@@engineeringclassesbydr.noo3377 Thank you mam. If I got the approx. value, like here the value of VC=17 mm and I got 17.2 mm, is it valid?
Yes
ma why 44 degrees pls i have exams soon
It's 45degrees, not 44
@@engineeringclassesbydr.noo3377 why 45 degrees tho
We r creating right angle triangle for constructing ellipse. That's why we are taking 45°in the left hand side. Just remember for doing ellipse it's 45°.
Mam what are the materials which you have use in this video to draw the ellipse
Drawing instruments & French curve.
Thank you mam🥰
Why don't faculty in our college dint teach like this
Deepika, Anyhow I am teaching through TH-cam.
Hello mam mi videos playlist motham chesna eg subject kani anni measurements different ga unay problems asal ardam kavatle is there any solution?? Latest ga konni ayina important questions cheandi mam plzzzz😇😇🥹
Always Dimensions same undavu , same problem unna different dimensions untai. Procedure same untadi. According to the given dimensions u have to draw diagram.
In my channel in videos check the popular videos, those r the important for exam point of view.
@@engineeringclassesbydr.noo3377 okay mam !! Thank you 👍😊
@@engineeringclassesbydr.noo3377 yeah mam kani latest ga oka video upload cheyandi mam topics wise okka problem ala fast ga cheyandi pass Ela avali takkuva nerchukuna caeg plzz mam my kindly request!! I will recommend everyone of my friends!!
Ma'am is 1mm to 2mm deviation okay in graphics??
Ok
Thank you ma'am
Where we use the 70 mm mam?
It's the distance between directrix & 'P 'point.
Thank you mam ☺️