Thank you for these types of videos, I hope you've been doing well, I love your rig & what you did with your fathers rig. Keep up the amazing work and the beautiful content, much love and godspeed
Boy I can say one thing ,,the ones commentating on here and reading the load securement book at the same time ,,kills me ,, this ole boy does it like we do and everyone else for that matter ,, you co. Kickers just do as your told or be a door dummy but please stop telling this kid he’s doing it all wrong , good lord…Son your doing a fine job and keep it up. 👍 🇺🇸 Holy shit the new generation of TH-cam couch cookies critters and Dudley doo rites commentating and the know it alls and your doing it all wrong is straight hilarious,, best commentating night club comedians yet, Keep ‘em coming 😂😂
Well done the pedal on the dozer Its called a (de-acceleratror) It does help to be an operator and a truck driver, I just use handle of binder to clean off spot on track for chain hook instead of a bar Nice job
You should do a video about the chains and binders you use. Like the sizes of chains and binders. Working load limits and how much securement you carry as well as safety flags.
Here in VA I use 1/2" chains and 1/2" binders. Got 4) 20' 1/2" chains and 4) 5' 1/2" chains with 8) 1/2" binders. Remember you can never get in trouble for having to many binders and chains.
Hauling residential demo excavator half of the time is the only way to do it. Hauling machines to construction sites there’s plenty of space to disconnect
Todo chingon el video. Dale duro hermano y con cuidado. Saludos desde aqui mero en H-Town. Feliz Navidad y prospero Año Nuevo de parte de otro trokero chingon 💪🏽👍🏽🚚
The Military made me cross chain a 53 million dollar jet engines when I took it to Boing. I didn't want to, but, had no choice. When I got to Boing, they were pissed. I told them I had no choice. He went in and got a printout of chaining and engine properly, "just like I wanted to chain it" he said, give them that next time, if it's not chained like that, tell them don't send it. I don't like cross chain.
We got this trailer at a auction years ago, was already beat from the sides. But one thing for sure this trailer has taken a beating and still has lots of life to go.
it is in Alabama, seen so many dozers sitting on flatbeds at weigh stations out back. Yes, flatbeds. They think they got a good paying load till they get stopped. Amber light permit in Alabama too. Weather it works or not, loaded or empty. you better have it.
So i have watched a few Videos and i am ashamed how you safe your Loads. I mean i am from Germany, i don`t know if it is right in your Country, but in Germany or Europe at all you cant`t safe your Bulldozer like that. You never should safe your Doze on the tracks, every construction equipment has it`s exact spots where you can put your chains on to secure it, but you never secure it on the tracks, because everyone who workes with Dozers or Excavators knows that these tracks sometimes come lose or off, so they are no propert point to secure your load. At least in Germany it is like this, but i would recommend you to look for the right spot on the construction equipment to secure it. Just a little tip from Germany 🤙
That was a $hitty tie down job. Should’ve used the d rings on the trailer, not the rail. And don’t hook to the tracks. This video is educational on what not to do.
I normally don't get mad at tutorials being slightly wrong but you're going to get someone killed "teaching people" how to load down their trailer. THIS IS WRONG PEOPLE!
Thank you for these types of videos, I hope you've been doing well, I love your rig & what you did with your fathers rig. Keep up the amazing work and the beautiful content, much love and godspeed
Best HH trucking on freakin TH-cam right here…!!
Boy I can say one thing ,,the ones commentating on here and reading the load securement book at the same time ,,kills me ,, this ole boy does it like we do and everyone else for that matter ,, you co. Kickers just do as your told or be a door dummy but please stop telling this kid he’s doing it all wrong , good lord…Son your doing a fine job and keep it up. 👍 🇺🇸
Holy shit the new generation of TH-cam couch cookies critters and Dudley doo rites commentating and the know it alls and your doing it all wrong is straight hilarious,, best commentating night club comedians yet,
Keep ‘em coming 😂😂
Well done the pedal on the dozer Its called a (de-acceleratror)
It does help to be an operator and a truck driver, I just use handle of binder to clean off spot on track for chain hook instead of a bar
Nice job
hello trucker I'm from the Czech Republic and I like watching your videos. so I'm sending greetings from the Czech Republic
Cool, thanks!
I’ve learned a thing or two from watching you work and I just want to say thank you!
You should do a video about the chains and binders you use. Like the sizes of chains and binders. Working load limits and how much securement you carry as well as safety flags.
Here in VA I use 1/2" chains and 1/2" binders. Got 4) 20' 1/2" chains and 4) 5' 1/2" chains with 8) 1/2" binders.
Remember you can never get in trouble for having to many binders and chains.
Love the educational videos. Can you please make more loading and changing videos. Great content as always
Thank you
Awesome man ! 👍🏼 I learn a lot just from watching good job I really appreciate your videos 💯
Great work with great quality. Appreciate your videos man😎
I appreciate that!
Bruh you're the man. I ain't side load/unloading no machine.
Hauling residential demo excavator half of the time is the only way to do it. Hauling machines to construction sites there’s plenty of space to disconnect
That is some real skill.
Thanks 🙏🏿 you for everything been learning a lot from you 💯
Buenas Gerardo como andamos saludos acá de Austin tx Freddy Delgado ánimo chulada de videos y se oye perron el trailer ánimo
Cool job man 👏👏👏👏👏
SMOOOth unloading
Great video. Thank you!!!
Awesome video
Todo chingon el video. Dale duro hermano y con cuidado. Saludos desde aqui mero en H-Town. Feliz Navidad y prospero Año Nuevo de parte de otro trokero chingon 💪🏽👍🏽🚚
Gr8 Vids & Content!!!!!!
Thanks for the great videos 🤟🏽
thinking bout doin equipment transport but heat is tough in aZ lol
Hello trucker i am from Indonesia 👍👍👍
What kind of quick connects do you use for your airlines?
Saludasos amigo. Jerardo.
How did you get those contracts
Dont forget to activate the trailer magnets 😅
Is that a 55 ton Fontaine Trl
50 ton
Hi bro! What do you use for filming? Glasses with cameras or GoPro type thing? Thanks for the video!
It’s just a go pro
@@Grtruckingdemolitionllc thanks
how much HP should your truck have to haul these types of equipment maybe even bigger.
475hp
Do you need permits just running around Texas?
Yes sir
Have you looked into the new speed binders?
I’ve seen them but not interested in getting any.
Bro, you sound like the guy who runs Pepe Towing Channel. Runs a rotator rig ‘Hulk.’
I’ve heard of that channel. But never have seen it. I’ll have to take a look
Always worried about how clean your bed is, but you leave all that dirt on the tracks
Do you have to tie down the blade? Iv hauled plenty of dozer up to the D8s never tied them down never had an issue with DOT
the proper way is to secure the blade. But you know how it is. Everyone does their own thing when hauling
You should always cross the chain on the back and on the blade I would go through the d ring and hook it kind short
That could work to, there’s different ways I secure dozers. Sometimes I use 2 small 5ft chains on the blade one pulling each corner in.
The Military made me cross chain a 53 million dollar jet engines when I took it to Boing. I didn't want to, but, had no choice. When I got to Boing, they were pissed. I told them I had no choice. He went in and got a printout of chaining and engine properly, "just like I wanted to chain it" he said, give them that next time, if it's not chained like that, tell them don't send it. I don't like cross chain.
Klk hermano bendiciones
Are you using 3/8 chain or 1/2" chain ? thanks
I carry both, but 1/2 I use most of the time. I do use 3/8 for the dozer blades or small excavators/ skid steers
Hi! Tell me please, why do you chain the blade of a bulldozer? Are these some rules?
Yes you must secure anything that is articulating per the fmcsa
There’s a REASON you see on all new RGN trailers “DO NOT SIDE UNLOAD”! Look at all the damage to the top of the side rails on your trailer.
We got this trailer at a auction years ago, was already beat from the sides. But one thing for sure this trailer has taken a beating and still has lots of life to go.
@@Grtruckingdemolitionllc If you are going to film yourself, why not do it right?? Signed, 70 years old, 49 years trucking, 25 years heavy haul.
God! He secure the load on side rails of the trailer. It’s work’s but dmg the trailer… and depending of load weight could cause an accident.
@@danmetcalf7184shut up!
why do u have to chain and bind the blade?
anything hydraulic
Hey, what model of lowboy is that??
Fontaine RAM 50
You should get a couple carabiner clips instead of zip ties. You’re wasting money with zip ties
Zip ties ain’t that expensive, but your right never thought about that. I’ll definitely will invest a couple dollars on that. Thanks for the tip 👍🏼
Can any one help me with the name of the first truck exactly model
kenworth T800
Are there any regulations for debris coming off the equipment during transit? Example dried mudd
Hello
It’s not called the pedal. It’s called the decelerator.
That decelerator looks like a pedal to me
😂😂
How could we contact with you ?
Instagram: grtruckingdemolitionllc
@@Grtruckingdemolitionllc Thank you very much, leave a message to you.
Tell your operators to start cleaning there equipment before delivery!
Never turn your back to traffic
That’s right, someone can be distracted and not see you
And I thought it was illegal to load bladed equipment forward?
Never had a problem with it here in tx
it is in Alabama, seen so many dozers sitting on flatbeds at weigh stations out back. Yes, flatbeds. They think they got a good paying load till they get stopped. Amber light permit in Alabama too. Weather it works or not, loaded or empty. you better have it.
Zip ties?..... bahahaha 😂
I wouldn't use that type of knife.i would use a snip cutter or a wire cutter and reduce the chances of cutting myself.
Say buddy u should sell him one of those vest just looking at him he turn his back to the traffic I am gone to buy me two of them
Your right, im going to gift my friend bubba a vest so he can wear it.
I would never chain it down like that
😂😂
So i have watched a few Videos and i am ashamed how you safe your Loads. I mean i am from Germany, i don`t know if it is right in your Country, but in Germany or Europe at all you cant`t safe your Bulldozer like that. You never should safe your Doze on the tracks, every construction equipment has it`s exact spots where you can put your chains on to secure it, but you never secure it on the tracks, because everyone who workes with Dozers or Excavators knows that these tracks sometimes come lose or off, so they are no propert point to secure your load.
At least in Germany it is like this, but i would recommend you to look for the right spot on the construction equipment to secure it. Just a little tip from Germany 🤙
That was a $hitty tie down job. Should’ve used the d rings on the trailer, not the rail. And don’t hook to the tracks. This video is educational on what not to do.
What the fuck ever snowflake ,,,
We do this everyday day,, and hell for the last 41 yrs for me ..these comments are just too much these days 😂😂
!/2" binders fit the beam, you butt them up against the mounts for the plank extensions that swing out. Much better than D rings.
Don't cry when you guys see outsider and company trucks moving your freight.. all you social media boys are showing too much secrets on the game ..
You have to be able to drive stick lol these door dummies can’t 😅
Nobody is CRYING, GET YO LOADS, MIND YO OWN BUSINESS, GET TO WORK, AND QUIT GIVING SO MUCH THIUGHT TO WHAT OTHERS THINK ABOUT YOU..
Make yo money and SHUT UP YOU PUNK
Dot will have a bigger problem with dirt between the tracks instead of one end of the chain flopping around.
No they don’t 😂
Mandale castellano amigo
I normally don't get mad at tutorials being slightly wrong but you're going to get someone killed "teaching people" how to load down their trailer. THIS IS WRONG PEOPLE!
😂😂😂
You snowflakes are killing me personally 🤦♂️🤦♂️