Used this to mount and wire up my 10 inch android for my EVO x. Only thing I have to do is wire a trigger wire off the yellow camera wire that was on the CAN BUS. Thank you for the help . It came out nice !!!
@@xtra_slo1596 would this camera work on the X!? www.bestbuy.com/site/ibeam-license-plate-back-up-camera-with-night-vision-and-active-parking-lines/6294611.p?skuId=6294611
@@xtra_slo1596 I got one but no plans to do this... although I just clipped a kerb (it’s snowing in Scotland and many morons on the road. Gutted. Probably bent the chassis or something knowing my luck 😔
I'm usually one that hates on backup cameras because I think they're gimmicky, but knowing how annoying it is to see out the back of these cars, I may do it just for the fact I like to tinker. However, my only gripe is those splice clips. I would suggest soldering them directly for the best possible solid connection. Love your videos though man. I've owned my X for about a year and a half now and just found your channel and loving it.
I'm definitely gonna do this, Thank you so much.. I have the OEM Fosgate GPS head unit. I'm sure the wiring in the car is the same. I'll let you know what happens though.
niban Glad this project gets you excited to get it done ✅ the connection in the truck will be the same but I’d try finding the diagram for the oem gps headunit to make sure you have the proper blank plugs holes to connect to. It’s an factory option so it’s for sure behind the unit but just in case it’s a different plug I’d just double check for peace of mind before you have everything apart. Good luck and keep us updated 👍🏼
Andreas Schittkaeker you have to find the diagram for the gps head unit and the connection will be there 100%. The cars naturally can get a oem reverse camera so there is always a hook up just gotta find it. 👍🏼
@@xtra_slo1596 thanks for your answer. There is for sure a pin for the camera and the pilot line, as it is a OEM option. But all I found up to now in the diagrams is the connection for the OEM video aux in. By logical thinking the reverse camera pin should be near by. Most likely in the same plug/connector. I will figure it out eventually.
i just placed order for Lancer Radio Android 8.0to9.0 Touch Screen Octa Core 10.2 Screen 64G i have add rear cam and try to see if someone install it and your video pop up on my face .... now i can do it pretty Easy i guess , just need some extra wires Black and RED AS YOU SAID the am good to go , so excited for this Radio and definitely 5 Stares for your video ,,,
I ordered everything to do this. Bec i seen my video cable has these “trigger wires” that are only 5 inches of wire. Idk if I can use this wire as it is different to your. If you know what I am talking about and Can clarify it to me. That would be so helpful.
bought a ‘15 evo x 5 years ago new and i somehow just found your channel. loving the stuff i’m seeing! also, do you think it’s possible to use that video line to connect to something like a raspberry pi? to make a custom head unit out of the stock one?
Tyler Dean Thanks for watching and subscribing 🤙🏼 That video wire goes into the stock head unit where a stock reverse camera would go. Not sure if you wire into it you’d have functions. If interested in something like that I’d try getting a android tablet dash
Just want to know the red and yellow wires did they come with the camera. Asking because the one I have is not the same as yours. Reason being when i cut the yellow one there’s no red and black wire to extend but there 3 red,black and blue. And a red wire just outside of them.? And my red power wire is already in black and red coming out. So should I get a video wire that dose have black and red inside.
hey man I love your videos! but I was wondering if I can mount my reverse cam without removing the bumper? I figured I can try to snake the wire through blindly and pray that it will poke out where the plate lights are lol. hopefully you have heard of people trying to go the lazy route like I am and know from their experience whether I would be ok doing it that way?
ItWasWritten516 I honestly feel trying to do that would end up taking more time and definitely frustration then just piping the rear bumper off. Here’s a rear bumper removal video I made 👉🏼 th-cam.com/video/tkBWejnY9oU/w-d-xo.html
I got a 2011 evo, its a used model. It has the sygav aftermarket head unit. Would you know if mine came with the same head unit as you or no? It didn't come with a sub, but in the back i did find a thick blue wire that would be hooked up to a sub. the speakers sound blown as well, unless the speakers are pure trash to begin with.
Dave Budness Im almost sure the 2011’s did not come with a touch screen yet unless you had the oem navigation. If you have a after market head unit then you’d need to see if that new unit takes a reverse camera and wire it into that. I don’t have the sub either but it also has the wires if I did and yes the stock regular speakers are horrible.
Intenté instalarlo pero no funcionó? Tendra algo relacionado con la marca de la cámara? Compre una de la marca Audiobahn. Hice todo igual y nada. Cuál podrá ser la falla¿
@@xtra_slo1596 no aparece nada. La imagen de la pantalla se queda igual en azul reproduciendo la música aún poniendo la reversa. Las conexiones en la cajuela quedaron iguales. Positivo en cable blanco, negativo al negro y en el conector gris positivo en pin 7 y negativo al pin 3
@@tonocanse7770 Si no está recibiendo una señal que cambia la pantalla cuando está en reversa tiene que ser una conexión suelta que entra en el enchufe. He tenido la conexión suelta antes al instalar donde la pantalla no apareció, pero arreglarlo no hay problema al obtener una mejor conexión en el enchufe. Asegúrese de que los cables están entrando en el enchufe y mostrando un poco de alambre arrojado el otro lado. Eso debería garantizar la conexión.
if anyone buys the camera linked the 2 wires that connects to the head unit are yellow and black i left red disconnected and works fine, i was having a hard time because on the video he uses different wiring that the one that come with the camera linked.
I purchased a similar camera; however, my camera comes with a reverse trigger on the AV signal cable. In this case, do you have any suggestion on what to do with the reverse wire? PS: I purchase the exact camera on the link above that you suggested.
Ricky Lor I just checked the link to double check. Only thing I’m spotting a little different is the loop wire that either you keep or cut for reverse lines. Besides that it has direct pictures for connections just the same as this install. Lmk if this didn’t clear it up
Xtra_Slo, thanks for the clarification. It cleared thing a up and it worked! Awesome tutorial! Been searching for one like this for years. Keep up the good work!
Hey i need help! So i recently tackled this project about a week ago and i have not been able to successfully install the back up camera. The issue im having is that im having a black screen on my head unit when i try to go in revers. once i get out of revers the screen goes back to the screen it was on previously. i have checked all my wires and even used a voltage meter to make sure my camera is getting the 12v power it needs. im stuck and i thought maybe it was the camera but i got a new one today and i had the same issue. Please help.
Hey dude, I seemingly got the same reverse camera but noticing that the red/black cables from the camera are considerably higher gauge (smaller) than the 18AWG extension wire, is that all good? Thanks!
Hey there I know this a old video but I have a question here I just bought a digital stereo with backup camera the yellow wired comes with a red wire hanging out I don't know what it goes too any idea. Thank you
I need help, i got one of the RCA camera cable with the head on both side and read wire out.. how do i cut the head so i know how to connect the cable. because after i connect the head, there are 3 wire inside of the cable.
Hello, I just installed my backup camera on my Evo and it works fine, but when I put I'd pack into park or drive the screen goes fuzzy for like 10sec than it goes to the Android ui
@@xtra_slo1596 What do you think could be loose on it? I wasn't too sure where to connect the extra wire on the video cable that goes to the backup camera itself so I connected it to the red power cable for the backup camera. is that connected properly?
@@xtra_slo1596 Nico EvoX I figured it out. Pain in the ass to say the least. If you have an led reverse bulb the car will still send out a little bit of power enough to keep the reverse camera mode on but not enough to power the camera. Thanks for the help though!
Boost King I have the led reverse lights but I don’t put it in park being a gsr. Sounds like you a have an MR. Good to know for anyone who has the Android and the paddles 👍🏼
Alex Enriquez It should have no issues considering the reverse camera was an option on our cars from factory. That being said you’d have to find the wiring diagram for the plug behind the unit to know which two spots you will wire into
@@xtra_slo1596 same problem here. 2011 EVO X SST (MR) UK version with Rockford Fosgate. The grey connector you show is in not here. Two additional white ones are. But all are connected. There is one free 4 or 5 pin connection on the fosgate. I checked the evo wiring diagram, but no info how or where to connect the camera.
Andreas Schittkaeker I wrote In the other comment you made butter cars have a connection for the oem reverse camera option so you just have to find the proper diagram
Joe Mazzurco Going great, still gathering the rest of the build parts and then planning deconstruction to get her sleeved. In motion slow and steady 👍🏼
Joe Mazzurco stock sleeves won’t last for the power level I’d like the keep the car at plus to bore the stock block would make the structural integrity even weaker. Iron sleeves strengthen it greatly and add security for high power.
Joe Mazzurco idk if there is an exact number on it. I think anything over 700whp it would be a good investment but I’m sure there are all types of opinions on that. More then what it can hold is also how long would it last at the big power levels. With a big build and so much invested I personally think it’s worth the extra investment.
Marcos Reyes Everyone has that plug in the truck I spliced into. It’s the the rear lights for the car lol. I’ve done it on 1, 2014 and 2, 2015’s. In some weird way they are not in that location on your car then just find the wire cluster for the rear lights. Make sure you take all the panels out the truck. To find them easy follow down the wire stream coming out of the inside of the actual trunk lid running down into the body which is inside the trunk jam and into the trunk
Eric Ruiz Yes it’s the SSCO heavy weighted shift knob you can find on eBay. Company was called CSK when I purchased mine but has changed the name to that since then.
Finally doing this install this weekend. I saw it years ago on Evo X forums but happy someone did a video on it
Used this to mount and wire up my 10 inch android for my EVO x. Only thing I have to do is wire a trigger wire off the yellow camera wire that was on the CAN BUS. Thank you for the help . It came out nice !!!
Bravo! All details explained very well! Very helpful. Now we need the courage to do it ourselves :D
Always a fan.. most DEFINITELY my next install.
Richard Knight Thanks! So simple, cheap, hidden and works as oem 🤯
@@xtra_slo1596 thanks am gonna invest in one.
@@xtra_slo1596 would this camera work on the X!? www.bestbuy.com/site/ibeam-license-plate-back-up-camera-with-night-vision-and-active-parking-lines/6294611.p?skuId=6294611
Another great tutorial. Always well explained. Love the videos!.
Rowan Stewart Thanks Rowan! Tackle the project! 🤙🏼
Nicely explained especially when you flashed up the pin out diagrams, Thank you for that.
Allan Morris all about details 👌🏼
Do I own an Evo?
No.
Do I plan to do this?
No.
Am I still watching?
Yes.
SKDK YES!!! 🙌🏼 this is awesome! 🙌🏼
@@xtra_slo1596 I got one but no plans to do this... although I just clipped a kerb (it’s snowing in Scotland and many morons on the road. Gutted. Probably bent the chassis or something knowing my luck 😔
@@xtra_slo1596 ima still watch tho 😂✌️
Lmao sameeeee. I would never do this to an Evo
Thanks for the video, from this I was able to figure it out on my 2013 with OEM nav.
c00lybw0y Great to hear that! 👍🏼
How? Where did you plug yours?
I'm usually one that hates on backup cameras because I think they're gimmicky, but knowing how annoying it is to see out the back of these cars, I may do it just for the fact I like to tinker. However, my only gripe is those splice clips. I would suggest soldering them directly for the best possible solid connection.
Love your videos though man. I've owned my X for about a year and a half now and just found your channel and loving it.
Jared Frederick Thanjs for enjoying and the tips 👍🏼
That fitment is so good I need wheels like that for my evo
TheBlackCrown30 !! 👍🏼
I'm definitely gonna do this, Thank you so much.. I have the OEM Fosgate GPS head unit. I'm sure the wiring in the car is the same. I'll let you know what happens though.
niban Glad this project gets you excited to get it done ✅ the connection in the truck will be the same but I’d try finding the diagram for the oem gps headunit to make sure you have the proper blank plugs holes to connect to. It’s an factory option so it’s for sure behind the unit but just in case it’s a different plug I’d just double check for peace of mind before you have everything apart. Good luck and keep us updated 👍🏼
@@xtra_slo1596 I tried it with my Rockford Fosgate GPS. I could not figure out which pins I have to connect to.
Andreas Schittkaeker you have to find the diagram for the gps head unit and the connection will be there 100%. The cars naturally can get a oem reverse camera so there is always a hook up just gotta find it. 👍🏼
@@xtra_slo1596 thanks for your answer. There is for sure a pin for the camera and the pilot line, as it is a OEM option. But all I found up to now in the diagrams is the connection for the OEM video aux in. By logical thinking the reverse camera pin should be near by. Most likely in the same plug/connector. I will figure it out eventually.
Andreas Schittkaeker good luck and hope you find the source 👍🏼
Im from Malaysia but this still helps. Thanks for good content.
Perfect Vid, been wanting to do this on my 14 for a few years now. About to go searching for some camera's and do a little Covid project.
Awesome 🤟🏼 Makes reversing into spot 100% better
i just placed order for Lancer Radio Android 8.0to9.0 Touch Screen Octa Core 10.2 Screen 64G i have add rear cam and try to see if someone install it and your video pop up on my face .... now i can do it pretty Easy i guess , just need some extra wires Black and RED AS YOU SAID the am good to go , so excited for this Radio and definitely 5 Stares for your video ,,,
Awesome upgrade! Good luck with the install and thanks for the 5 star review!!!⭐️ ⭐️⭐️⭐️⭐️
Love the video man!! Thanks for all the tutorials again
Michael Ruiz 🙌🏼Appreciate🙌🏼
Yes! I need this. I dont trust myself haha
Evo X Pov Glad this helps! Best $10-$20 you’ll ever spend on the Evo!
I ordered everything to do this. Bec i seen my video cable has these “trigger wires” that are only 5 inches of wire. Idk if I can use this wire as it is different to your. If you know what I am talking about and Can clarify it to me. That would be so helpful.
How can I do this to my Evo? I have a 2013 GSR with the Rockford fosgate Mitsubishi multimedia screen and I don’t know what harness to tap into.
bought a ‘15 evo x 5 years ago new and i somehow just found your channel. loving the stuff i’m seeing! also, do you think it’s possible to use that video line to connect to something like a raspberry pi? to make a custom head unit out of the stock one?
Tyler Dean Thanks for watching and subscribing 🤙🏼 That video wire goes into the stock head unit where a stock reverse camera would go. Not sure if you wire into it you’d have functions. If interested in something like that I’d try getting a android tablet dash
So if you have a Tesla radio in the evo x , would you still connect the wires to the factory backup camera plug still ?
Just want to know the red and yellow wires did they come with the camera. Asking because the one I have is not the same as yours. Reason being when i cut the yellow one there’s no red and black wire to extend but there 3 red,black and blue. And a red wire just outside of them.? And my red power wire is already in black and red coming out. So should I get a video wire that dose have black and red inside.
Hi. Would this install work for the SST model?. Or would there need to be some changes compared to your guide?. Thank You.
Rowan Stewart yes it should work the exact same 👍🏼
Keepin it cleannnn
hey man I love your videos! but I was wondering if I can mount my reverse cam without removing the bumper? I figured I can try to snake the wire through blindly and pray that it will poke out where the plate lights are lol. hopefully you have heard of people trying to go the lazy route like I am and know from their experience whether I would be ok doing it that way?
ItWasWritten516 I honestly feel trying to do that would end up taking more time and definitely frustration then just piping the rear bumper off. Here’s a rear bumper removal video I made 👉🏼 th-cam.com/video/tkBWejnY9oU/w-d-xo.html
Hi. I connect the reverse camera, but the image appears in black and white, in addition to rotating the screen. What can be the error? Thanks bro
And AGAIN great content man!!
Colton Nowakowski Thanks Colton 🤙🏼
I have a different radio on mine. Will this work too 2008 evo x sss package
This video really helps! Thanks for sharing bro.
I got a 2011 evo, its a used model. It has the sygav aftermarket head unit. Would you know if mine came with the same head unit as you or no? It didn't come with a sub, but in the back i did find a thick blue wire that would be hooked up to a sub. the speakers sound blown as well, unless the speakers are pure trash to begin with.
Dave Budness Im almost sure the 2011’s did not come with a touch screen yet unless you had the oem navigation. If you have a after market head unit then you’d need to see if that new unit takes a reverse camera and wire it into that. I don’t have the sub either but it also has the wires if I did and yes the stock regular speakers are horrible.
That’ll work on the final edition radio too I’m assuming right?
Yes same head units 👌🏼
Excelente video. Te agradezco mucho la aportación. Seguro la instalaré en mi auto.
Un abrazo y mis mejores deseos amigo.
Toño Canse ¡Muchas gracias! Me alegro de que disfrutes el video y espero que esto ayude. la mejor de las suertes en una instalación fácil mi amigo.
Intenté instalarlo pero no funcionó? Tendra algo relacionado con la marca de la cámara? Compre una de la marca Audiobahn. Hice todo igual y nada. Cuál podrá ser la falla¿
@@tonocanse7770Esa marca parece estar bien. ¿Aparece una pantalla negra en reversa o no hay ninguna conexión? Debe ser una conexión suelta
@@xtra_slo1596 no aparece nada. La imagen de la pantalla se queda igual en azul reproduciendo la música aún poniendo la reversa. Las conexiones en la cajuela quedaron iguales. Positivo en cable blanco, negativo al negro y en el conector gris positivo en pin 7 y negativo al pin 3
@@tonocanse7770 Si no está recibiendo una señal que cambia la pantalla cuando está en reversa tiene que ser una conexión suelta que entra en el enchufe. He tenido la conexión suelta antes al instalar donde la pantalla no apareció, pero arreglarlo no hay problema al obtener una mejor conexión en el enchufe. Asegúrese de que los cables están entrando en el enchufe y mostrando un poco de alambre arrojado el otro lado. Eso debería garantizar la conexión.
Just bought 1👀 Where did you get the hardware for this man?
Anthony Harris all can be found at Ace or your local hardware store
Extremely helpful thank you 🙏🏼
if anyone buys the camera linked the 2 wires that connects to the head unit are yellow and black i left red disconnected and works fine, i was having a hard time because on the video he uses different wiring that the one that come with the camera linked.
I purchased a similar camera; however, my camera comes with a reverse trigger on the AV signal cable. In this case, do you have any suggestion on what to do with the reverse wire? PS: I purchase the exact camera on the link above that you suggested.
Ricky Lor I just checked the link to double check. Only thing I’m spotting a little different is the loop wire that either you keep or cut for reverse lines. Besides that it has direct pictures for connections just the same as this install. Lmk if this didn’t clear it up
Xtra_Slo, thanks for the clarification. It cleared thing a up and it worked! Awesome tutorial! Been searching for one like this for years. Keep up the good work!
Ricky Lor Great! Glad to hear that helped and the video was useful. I love mine too
Thank you for this video very informative.
Glad it helps
I have done the exact same but the photo quality is not great on my screen. Any ideas why?
Most likely need a better connection
I have reconnected everything but feels like maybe the camera itself has an issue.
Thanks for reply.
Hey i need help! So i recently tackled this project about a week ago and i have not been able to successfully install the back up camera. The issue im having is that im having a black screen on my head unit when i try to go in revers. once i get out of revers the screen goes back to the screen it was on previously. i have checked all my wires and even used a voltage meter to make sure my camera is getting the 12v power it needs. im stuck and i thought maybe it was the camera but i got a new one today and i had the same issue. Please help.
Dm me on Insta, I can help. @elkoqui8
Nice video! . Link to your cubby pod?
Ry Guy it’s just an eBay dual pod I modified to fit. They sell a ton cheap , just make you check your measurements before ordering
Where can I get the manual (wiring and pin connections) as seen in the video?
Should be in the glove box. If it look online for pictures
Hey dude, I seemingly got the same reverse camera but noticing that the red/black cables from the camera are considerably higher gauge (smaller) than the 18AWG extension wire, is that all good? Thanks!
Yea they are small inside after split but yes they will work just like I did in the video
Hey there I know this a old video but I have a question here I just bought a digital stereo with backup camera the yellow wired comes with a red wire hanging out I don't know what it goes too any idea.
Thank you
Red goes to whatever ur power is for the camera
@@Evoxdonii I found out thanks
I need help, i got one of the RCA camera cable with the head on both side and read wire out.. how do i cut the head so i know how to connect the cable. because after i connect the head, there are 3 wire inside of the cable.
Aaron Ou message me on Instagram so we can have a conversations with pictures ig: xtra_slo
Aaron Ou im having the same problem i have 3 wires red,yellow,black .. what did you do?
I just installed a back up camera n when i put in reverse i get nothing, take it out of reverse screen goes black for a second and goes away
Hey I’m having the same issue did you ever get it fixed? I need help!
can you share the cámara link you use please
will thos work on the final edition with navi screen
In pin #2 , reverse sensor wire , where can i find it ?? , cuz i dont have the original camera harness
Rayan M in the back where you pin it there isn’t one but rather the new red positive wire you’ve ran from the new camera goes in it
Hello, I just installed my backup camera on my Evo and it works fine, but when I put I'd pack into park or drive the screen goes fuzzy for like 10sec than it goes to the Android ui
Boost King I’m not fully familiar with the Android unit connection but almost sounds like a loose connection?
@@xtra_slo1596 What do you think could be loose on it? I wasn't too sure where to connect the extra wire on the video cable that goes to the backup camera itself so I connected it to the red power cable for the backup camera. is that connected properly?
@@xtra_slo1596 Nico EvoX I figured it out. Pain in the ass to say the least. If you have an led reverse bulb the car will still send out a little bit of power enough to keep the reverse camera mode on but not enough to power the camera. Thanks for the help though!
Boost King I have the led reverse lights but I don’t put it in park being a gsr. Sounds like you a have an MR. Good to know for anyone who has the Android and the paddles 👍🏼
Tried this and the camera would not turn on when going to reverse 😞
@@user-nd8uz3xe6b loose connection somewhere
What size wheels are on the white evo
TheBlackCrown30 !! 18x9.5 +15
Wondering if this will work with mine. I have the rockford fosgate in my 2011
Alex Enriquez It should have no issues considering the reverse camera was an option on our cars from factory. That being said you’d have to find the wiring diagram for the plug behind the unit to know which two spots you will wire into
Xtra_Slo got it. Thanks man 🙏🏼
Alex Enriquez no problem, good luck! 👍🏼
@@xtra_slo1596 same problem here. 2011 EVO X SST (MR) UK version with Rockford Fosgate. The grey connector you show is in not here. Two additional white ones are. But all are connected. There is one free 4 or 5 pin connection on the fosgate. I checked the evo wiring diagram, but no info how or where to connect the camera.
Andreas Schittkaeker I wrote In the other comment you made butter cars have a connection for the oem reverse camera option so you just have to find the proper diagram
Next video ams cmc install please!
Cyril John Soon! Right before I pull the motor to get sleeved I’ll be making that video 👍🏼
Cool man! I did my back up camera thanks to you man! Hoping more content from you. Have a good one!
Just installed when i put in reverse nothing, out of reverse i get black screen for a few seconds
Make sure your video cable is powered.
Hey hows the build going??
Joe Mazzurco Going great, still gathering the rest of the build parts and then planning deconstruction to get her sleeved. In motion slow and steady 👍🏼
Xtra_Slo so how come your going sleeved and not just bore with upgraded pistons??
Joe Mazzurco stock sleeves won’t last for the power level I’d like the keep the car at plus to bore the stock block would make the structural integrity even weaker. Iron sleeves strengthen it greatly and add security for high power.
How much power should you run on the 4b11t without sleeving it??
Joe Mazzurco idk if there is an exact number on it. I think anything over 700whp it would be a good investment but I’m sure there are all types of opinions on that. More then what it can hold is also how long would it last at the big power levels. With a big build and so much invested I personally think it’s worth the extra investment.
Very good bro, 👍👍👍 you amazing
Thank you 🙌🏼
Badass video bro
Thanks man 🤙🏼
Where did you get your quick splice clips?
Everardo Flores I think I got mine from Harbor freight
Xtra_Slo thank you sir. Great video.
Everardo Flores Thanks man glad it helps 👍🏼
So why hasn't anyone asked how to remove the extra back up lines on the screen? Lol. So my question is how do you?
The directions for the camera should show which wire needs to be cut to delete the lines.
what part of Florida are you in
Tampa, Fl
my 2015 doesnt have that plug in the trunk :/
Marcos Reyes Everyone has that plug in the truck I spliced into. It’s the the rear lights for the car lol. I’ve done it on 1, 2014 and 2, 2015’s. In some weird way they are not in that location on your car then just find the wire cluster for the rear lights. Make sure you take all the panels out the truck. To find them easy follow down the wire stream coming out of the inside of the actual trunk lid running down into the body which is inside the trunk jam and into the trunk
@@xtra_slo1596 I'll double check again. When I tried doing this the last time it was a bust for me but I'll give it another go 👍
Marcos Reyes you got it 💪🏼 good luck and message me with any questions if you get stuck
does anyone know what shift knob that is ?
Eric Ruiz Yes it’s the SSCO heavy weighted shift knob you can find on eBay. Company was called CSK when I purchased mine but has changed the name to that since then.
Mi lancer 2016
Here first 🙌🏼😘
Your video is not clearly instructor you're splicing in wire before you are not even show the people what you're using, you're just saying color code.