Weber 40 IDTP Carburetors. 3C 4835 & 3C-1 5229
ฝัง
- เผยแพร่เมื่อ 7 ม.ค. 2025
- Weber 40IDTP Carburetor Set
Carburetor numbers 4835 and 5229
This set is sold.
The Weber 40 IDTP carburetors were factory installed on the 1969-71 911T models. These carburetors were the 4th evolution of the original IDA design that was first installed on Porsche 911 engines as of late 1966. There are 5 main differences between the original Weber IDA and the IDTP series carburetors.
This set of carburetors.
This IDTP set is an original set delivered to Porsche. Both carburetor bodies bear the Porsche parts insignia stamped into the front of the housing. This feature is only found on carburetors that were factory installed on the engine at birth. Replacement carburetors did not bear this mark. The bodies are also made in Italy.
Rebuilding process
These carburetors have been professionally remanufactured. This started with a full teardown to bare aluminum housings, all studs removed as well as all other components. The gasket surfaces were machined flat. All lead passageway plugs were removed so that all fuel passageways could be manually cleaned.
After cleaning and machining, the bodies were re-anodized in their original color. The re-used hardware, (studs and some brackets) were re-plated in yellow cad. The velocity stacks were plated in a bright nickel finish.
Assembly
After refinishing the carburetors, they were assembled using all new brass jet holders, jets, emulsion tubes, bowl plugs, progression port plugs, floats, and accelerator pump components. A new set of throttle shafts with new bushings and new throttle plates were also installed. The 27 mm chokes that had been modified by a previous owner were replaced with a new set of 30 mm chokes and a matching jet package. Though not completely stock the 30 mm choke and jet package will tend to really wake up the 911T engine. It provides smooth driving with increased upper RPM performance without sacrificing idle quality or low-end acceleration.
Run Testing
Both carburetors were set up on the bench before being transferred to our own test engine. The carburetors were run tested and checked for leaks. Both carburetors have been balanced and mixtures set. The accelerator pump circuits have also been fine-tuned to ensure a smooth response from both light and aggressive throttle movements.
After successfully passing the engine run test and full tune the carburetors have been fully drained of fuel and aired out ready for shipping. In our test engine, we always run a small amount of 2 stroke oil and fuel conditioner in our tank. This helps to lubricate the fuel system internals and ensuring that any fuel however small the amount will not contaminate the freshly rebuilt carburetors.
Lastly of course the entire rebuild process including the run test has been caught on film. This allows you to see the entire job.
Jet Package Installed
Choke 30 mm Auxiliary Booster 4.5 mm
Main Jet 125 Idle Jet 55
Main Air Jet 170 Emulsion Tube F26
Needle / Seat 1.75 Pump Discharge Volume .50 cc
Pump nozzle .50
New Parts Installed
Full Gasket Set Needle and Seat Assemblies New Weber Floats
New Nylock Nuts, (M4/M5) Throttle Return Springs Throttle Pivot Balls
Main Jets Main Jet Holders Idle Jet Holders
Idle Jets Progression Port Plugs Bowl Plugs
Float Pivot Pins Mixture Screws Mixture Screw cups
Emulsion Tubes Main Air Correctors Fuel Strainers
Fuel Hose and Ferrules Throttle Shafts Throttle Plates and Screws
Accel/pump Lever Accel Pump Rods Accelerator pump pivot
Choke Set Inlet/Exhaust Valve Accel Pump Banjo Bolts
Pump Discharge Nozzles Pump Springs Lead passageway plugs
Needle/seat cover plugs Idle jet/Mixture Screw Orings
These carburetors are about as new as you can get. Just install and drive…
The carburetor set comes with a 6-month warranty on parts and workmanship.
One of the true hidden gems on TH-cam. Hands down the best for straight information and no fluff on air cooled Porsches. This channel should have hundreds of thousands subscribers. Pay this man some respect, smash the like button, and subscribe. Well done!!!!
Thanks for the awesome comment Charles
Kurt
I own the car these exact carbs were installed onto. 1971 911T. They run incredible!
Glad to hear it
Kurt
ThankYou !!!! Your channel is The Very Most Informative and Inclusive !!!! :) I am glad that You Exist !!!! I would like to shake Your hand !!!
Wow, thank you!
and thanks for watching
Kurt
Beautiful as always!
Thank you! 😊
Lovely job .
Thank you!
Bravo!!!
Thanks
When does mechanical engineering become art? I will take a guess and say in the above!!
Paul,
Yes working on these often feels like building a piece of art...
Thanks for watching and glad you enjoyed it
Kurt
I have a set of 40-IDA-3C’s that need your service, is this an option and what kind of budget should I plan on?
Perry, Yes I can do a set of carburetors for you. Pricing will vary greatly depending on the starting condition of the carburetors and what kind of finish you would like applied to the bodies. The best way would to send us an email at contact@klassikats.com and send me some pictures of what you have.
Thanks Kurt