ฝัง
- เผยแพร่เมื่อ 23 ก.ค. 2024
- In this video, the importance of PRF tubes is presented. It is hard to imagine that the effect of centrifugation tubes may in fact be more relevant for the production of PRF than the actual centrifugation device. Unfortunately, the majority of tubes utilized for the production of PRF are not purposefully designed for PRF; they are generally laboratory test tubes utilized for lab testing, which have since beenbrought to market and utilized for human clinical applications (many without FDA/CE clearance). In a recent technical note on this topic, it was discovered that many PRF tubes are filled with chemical additives such as silica/silicone with unpredictable clinical outcomes.
Many clinicians have noted an increased variability in PRF clot sizes, a decreased rate of clot formation (PRF remains liquid even after an adequate protocol is followed), or even an increased rate in the clinical signs of inflammation following the use of PRF. This video addresses these more recent issues as well as the research under investigation to develop hydrophilic/hydrophobic chemical-free tubes for the production of PRF.
Understanding Platelet-Rich Fibrin Full Textbook is available for purchase at www.prfedu.com/product-page/p...
Chemical free tubes designed specifically for the production of PRF can be found at: www.bio-prf.com
Full PRF textbook and Hands-on courses are available at www.prfedu.com/
Over 50 publication downloads available free at www.bio-prf.com/research
Please leave comments below. - วิทยาศาสตร์และเทคโนโลยี
Thanks for this!
You give me better perspective as to what is REALLY going on!
Great video. Thank you for sharing. Yes, glass is reusable, strong, from Eastern European background you right.
Super great video. Thanks a lot.
Great videos and really well explained! I did a trial run with 160 g for 4 minutes and it took the prf longer than 35 minutes to clot. With 70 g for 4 minutes there were clots after 28 minutes. According to your research 160 g should give a higher platelet concentration but why am I observing a longer time until it clots? I would be assuming a longer time until it clots means less platelets?
Are the tubes only for that specific celinger?? Or it fits in any .thanks
Hi, Doc! What are the side effects of this silica stuff once this gets injected into the joints? Many thanks!
I’m SO UPSET I really been injecting tht foam under my eye!!!!!
WOOOOW jst did the water test. Two hundred tubes I have to get rid of. Thank you
What tube types are you using?
@@prfedu I purchased from a medical supplier from China ( red top glass tubes)
Will silica be expelled from my body thru lymphatic system? Or you I do something
I injected Prf multiple times under eye with these chemicals. Last time I did. I swelled up more then usual
@@Cinren This is why you need to use the correct tubes. I hope swelling goes down and you don't lose too much volume loss from the chemicals.
@@prfedu Yes jst purchase two boxes from your website. Is injecting proper correct PRF beneficial for the area ?
@@Cinren yes, most certainly. Chemical-free has no pronounced side effects.
We use PRF for face injections. Do you think glass tubes are superior to plastic?
Plastic is better for that application as it will minimize clotting (you want it to stay liquid as long as possible).
@@prfedu is it the plastic or the clot activator that plays a role in the clotting??
@@prfedu Either red or white tubes with clot activators are useless for i prf, right?
@@prfedu Why the blood is clotting in C-PRF? neither we are using clot activators nor glass/silica coated tubes, so it shouldn't clot right?
Wow. Just wow. I have learned so much from watching your videos. My gosh the tubes! What you discovered was happening is insane! So thankful for your research and for finding out there was a major problem happening with the tubes that people were using then making a solution, a reputable solution. Really thankful for your research and your team. Great videos! Stellar information! Keep up the phenomenal work!
Go Blue!
Please guide me for liquid prf. Ive tried 300 to 1000rpm for 5 minutes and always got fibrin clot. Im aesthetic physician & need liquid for skin indication. Please guide me.
you should use white tube.
What type of tubes did you use?
maybe its because u have high colesterol?
Hello dr .
I bought lots of tubes for my clinic but when I did water test there are foam showing . I don’t want to get ride of the tubes , so my question is this can I put the additives down the sink and rinse it with water before I use it on patient. But the tubes not made from glass its plastic tube .
Any suggestions please ?
After rinsing, they are no longer considered sterile.
turn the water OFF!!!
one can barely hear what are you saying
And also ....wasting clean energy 😮
The water test on red caps and green caps from the
same manufacturer showed foam in the red cap tubes
and no foam in the green cap… the red cap says no
additives, the green cap says heparin sodium. Could you
kindly explain why this is please
It means your red caps have additives and you shouldn't use them. Many tubes write no chemical additives but in fact they do.
@@prfedu do you send your products to the UK?
@@Lana-bp5tf Yes we do. Orders of over 500 USD so order a few cases and we will definitely ship to you.
I just want affordable plastic vacutainers with nothing in them to spin iprf. WHY is this so much to ask for!? I think I'm going to just retrofit my centrifuge to hold these 10ml sterile plastic vials I got online.
Any coupon's 😂