Honestly dude... you and these videos are the reason i went and spent all my damn money on one lol i love my k8s bro... you sold this truck and your videos are pure bait...another great bash session
@@RCDUDE81 totally agree man...I just got my badlands... next will be the xlx2 1100kv... watch out...I might start flipping that thing better than you lol
Awesome run Brother Eric 😜!!!! Nice bench overview of this Epic 8s beefcake option 🤗. So stoked Mitch and Avery are going full bore with the hardened steel parts to put the finishing touches on these Killer Big Beasts 😱!!!! The cartridges are such a perfect fit 👌. So impressed with Mitch's wizardry🥰🥰. It's great he'll be offering both EXB and RTR direct fit options too. Waiting patiently for the 7075 chassis brace ends and hardened set pins 👀. The platform is super impressive even stock, but there's no question M2C has taken large scale durability to a completely different level 😂. Absolutely sick bash with some huge floaters Bro!!!! Thanks for another great upload 🍻🤙🤙😎💪👊👊
Thanks so much Rich!🤗Stoked as well about these new M2C options! The driveshafts, shocks and rod ends are icing on the cake for this monster!💪💪Brace ends and pins will also be a savior!😍I was really diggin the new spot with the Mega down slope hill and death pit!👀Fortunately it's really close to my house! Just got to learn their schedule!🤣🤣Thanks for watching and your comment bro!😁💪👊👊
Dude 81 you are clear for lift off!! Another Great Bash ! You and Rich are just KILLING IT! Those shock shafts are stout. That flair to side landing plus slide was Amazing!! Always entertaining Bro!! Stay safe and bash on from Colorado!!!
aww hell yeah! that kraton is beefcakes! seems like though these upgrades are very necessary for such a heavy basher. if you want to actually get some that is
Wow, Eric, some of those landings were pretty scary, a stock k8s would have left in pieces, you've got that thing looking mighty! Some epic saves Bro, I love the k8s, but I'm always scared to drive it cause I break it so easy, hopefully with a few more upgrades I'll be able to bash it harder. Thanks for another great video!
Great bash Eric. M2C upgrades have always impressed me. I'm a huge Arrma fan but man all that stuff adds up. To get the K8 to where it needs to be once purchased you'd have more money in it than a lot of people have in their full sized cars 😳
Sickkkk Brother Eric No way even the new EXB shafts could have taken some of them huge sideways landings. I was like, 'somthing had to break on that one' and she just took it! Complete M2C Tank👍 Not gonna lie, was waiting for these (M2C 7mm Conversion), glad y'all bashing them hard Full confidence sends brother.. Just killer video See ya round my friend
Why? Keep em both bro. I have the same but have 3 K8's one of them being a EXB but the XMaXX is.fkn awesome at soaking up jumps on flat lands etc etc. They're both Great.
@@Cornelius456 with a beefed up kraton, the xmaxx seems like a 10yo toy to me. wont go as fast, wont travel as far in the air, isnt as athletic, and wont handle as well since the trick to the xmaxx is to just keep it as stock and light as possible. once you upgrade the powertrain, it turns into a neverending money pit.
As always an excellent bash session and pumped to get my hands on some of the m2c parts once released. I was out bashing yesterday and brought my ramps for the first time since lady year... I was talking to a buddy about ideas on how to either modify or build an adapter of some sort so that we could take a pair of ramps and securely mount them(temporarily mount if poss to make hauling them easier but not 100% necessary) . Than I suddenly realized you have been using the stacked ramps for a long time and still seem to be getting used... anyway you might be sale to give me any tips or info on how you tend to stack your ramps please ? I've got 3 pair of kickers that are all very close in dimensions. One pair is discounted ramps old composite kickers that they no longer seem to sell and the other 2 pair are almost identical to the Disc ramps but smaller in width by maybe 2-3 inches total when comparing one pair to the other pair with them both 2 ramps wide. As always apor you and all the insane content. Hope all is well and hoping maybe you can find time to offer some insight (unfortunately no pickup truck so that a main concern asidevfrom total weight if they need to be mounted somewhat permanently) thanks brother 🍻
Hey I recently got a k8 rtr and I’m thinking of adding m2c parts to it (chassis, driveshafts, shockshafts) but do you think it’s better to just go with EXB version instead of upgrading the K8 rtr? Thanks!
What is your opinion of the rpm arms? Some say not to do the upgrade bc of bending drive shafts. I have the M2C driveshafts and just curious if you found additional flexing of the driveshafts bc of the more flexible plastic
They are more durable for sure but also flex more. I don't like that they don't have a place for droop screws so it's full shock action which puts a lot of strain on the shocks. You can add limiters inside the shocks to compensate if you decide to run them.😎👊
m2cracing.net/shop/shop.php#!/M2C-3240-ARRMA-OUTCAST-8S-5MM-FRONT-OR-REAR-SHOCK-KIT/p/478044653 This a 5mm kit with m2C shock rod ends and shafts. You can also get the 7mm beefcake version. They don't sell just the shock rod ends as they work together with the upgraded M2C shafts. You could also go stock EXB shocks. Those rod ends hold up much better!
With out the cost of the kraton truggie just all the m2c upgrades how much would you say ball park looking to get out of my gas an into electric right now I have a ro an with a .71 motor it screams but looking for something different now
For all these upgrades probably $500ish depending on what all you get. Arrma also has the EXB roller version that is upgraded out of the box for a bit lesser cost all together but not as strong as the M2C upgrades. All up to how hard you bash!
I would full send it like how you do that's how I do my gas one up until an hour ago just sold it for 1320 lost my butt on it but never get what you have in them
Hi dude, how are you? Could you help me please? I bended the rear M2C CVD and broken one on the front, after big jumps and bad landing. Can you suggest me an upgrade, I was thinking about the titanium CVDs, what do you think? Nice video as always mate 😉
Are we having a tiger wood competition here (hold in one), rich duperbash just did that not long ago with his rig.😂🤣 let see who can get it hold in one with out demage.😂🤣
Hey bro. Wat if we talk on the side r publicly it doesn’t matter to me i just fig. Its no 1 business wat we chat about but please let me know an yes its about the Rc ? Thanks for ur time bro.
If u wanna chat i can give u my cell so no rush just when u get a chance please cuz ive got to get me 1 of those an i want it identical to the 1 i just watched on ur last TH-cam video so please get bk. To me an looking fwd. to talking with ya!
AWESOME BASH! Thanks for the shout outs! you really beat the heck out of it! i lost count of the backflips on one of them. thanks for posting!!!
When should these be available
Honestly dude... you and these videos are the reason i went and spent all my damn money on one lol i love my k8s bro... you sold this truck and your videos are pure bait...another great bash session
That's awesome! The K8 is a pure weapon once the right electronics and upgrades are in it! Love it!! Thanks for your comment!😎👊💪💪
@@RCDUDE81 totally agree man...I just got my badlands... next will be the xlx2 1100kv... watch out...I might start flipping that thing better than you lol
Dude...you a the Basher KING!!!! I'm amazing with your bashing skills and power
I really appreciate it bro! Just having fun!😜👊🤘🤘
M2c couldn’t have a better tester. Love your videos. Been around since the beginning and love the way you drive these rigs
Nice run! I thought I saw new shock body ends. No more shafts jamming up and bending! About time!
Awesome run Brother Eric 😜!!!! Nice bench overview of this Epic 8s beefcake option 🤗. So stoked Mitch and Avery are going full bore with the hardened steel parts to put the finishing touches on these Killer Big Beasts 😱!!!! The cartridges are such a perfect fit 👌. So impressed with Mitch's wizardry🥰🥰. It's great he'll be offering both EXB and RTR direct fit options too. Waiting patiently for the 7075 chassis brace ends and hardened set pins 👀. The platform is super impressive even stock, but there's no question M2C has taken large scale durability to a completely different level 😂. Absolutely sick bash with some huge floaters Bro!!!! Thanks for another great upload 🍻🤙🤙😎💪👊👊
Thanks so much Rich!🤗Stoked as well about these new M2C options! The driveshafts, shocks and rod ends are icing on the cake for this monster!💪💪Brace ends and pins will also be a savior!😍I was really diggin the new spot with the Mega down slope hill and death pit!👀Fortunately it's really close to my house! Just got to learn their schedule!🤣🤣Thanks for watching and your comment bro!😁💪👊👊
You, Rich and Chris Anthony are the guys who brought me back to rc! Love your videos! There's no one better!
That's awesome!! Thanks so much!😎💪👊👊
Dude 81 you are clear for lift off!! Another Great Bash ! You and Rich are just KILLING IT! Those shock shafts are stout. That flair to side landing plus slide was Amazing!! Always entertaining Bro!! Stay safe and bash on from Colorado!!!
aww hell yeah! that kraton is beefcakes! seems like though these upgrades are very necessary for such a heavy basher. if you want to actually get some that is
Wow, Eric, some of those landings were pretty scary, a stock k8s would have left in pieces, you've got that thing looking mighty! Some epic saves Bro, I love the k8s, but I'm always scared to drive it cause I break it so easy, hopefully with a few more upgrades I'll be able to bash it harder. Thanks for another great video!
Great bash Eric. M2C upgrades have always impressed me. I'm a huge Arrma fan but man all that stuff adds up. To get the K8 to where it needs to be once purchased you'd have more money in it than a lot of people have in their full sized cars 😳
Can’t wait for those M2C axle shafts. I’ve been pounding my stock ones back into the best shape I can manage. Awesome bash man!
Sickkkk Brother Eric
No way even the new EXB shafts could have taken some of them huge sideways landings.
I was like, 'somthing had to break on that one' and she just took it!
Complete M2C Tank👍
Not gonna lie, was waiting for these (M2C 7mm Conversion), glad y'all bashing them hard
Full confidence sends brother.. Just killer video
See ya round my friend
Nice upgrade of the prototypes
Yup I’ll be getting me a pair for my outcast 8s looks awesome man!
Killer bash session! I think once Mitch releases these parts I'm finally going to pull the trigger on a K8 EXB and sell my Xmaxx.
Why?
Keep em both bro.
I have the same but have 3 K8's one of them being a EXB but the XMaXX is.fkn awesome at soaking up jumps on flat lands etc etc.
They're both Great.
@@Cornelius456 with a beefed up kraton, the xmaxx seems like a 10yo toy to me. wont go as fast, wont travel as far in the air, isnt as athletic, and wont handle as well since the trick to the xmaxx is to just keep it as stock and light as possible. once you upgrade the powertrain, it turns into a neverending money pit.
I see those EXB turnbuckles fitted up knackers.
I did the same.
You almost always save them wild ones👍 I get a lil squirrelly and break a arm or turnbuckle rod end every time. Nice one as always brother 💪👊
Another wicked bash Homie! Inspirational as usual, can’t wait for those new upgrades. 😎🤙
Thanks so much!!😁👊
Nice dude! Need to get some of them for my outcast 8s. Hopefully they will be available in the UK soon. Awsome bash brother!!👍🙂
Badtouch Breakers is your man for all thing's M2c in the UK
@@reubydo yeah Adrian is the man! I will give him a shout and see wen these are available.
Great video, you have the best bash spots👊👊💯💯
Can't wait for the drive shafts!
Absolutely love video bro testing these things to there limits is a blast were would arrma be with out m2c .haha
Absolutely bro!😎👊👊
As always an excellent bash session and pumped to get my hands on some of the m2c parts once released. I was out bashing yesterday and brought my ramps for the first time since lady year... I was talking to a buddy about ideas on how to either modify or build an adapter of some sort so that we could take a pair of ramps and securely mount them(temporarily mount if poss to make hauling them easier but not 100% necessary) . Than I suddenly realized you have been using the stacked ramps for a long time and still seem to be getting used... anyway you might be sale to give me any tips or info on how you tend to stack your ramps please ? I've got 3 pair of kickers that are all very close in dimensions. One pair is discounted ramps old composite kickers that they no longer seem to sell and the other 2 pair are almost identical to the Disc ramps but smaller in width by maybe 2-3 inches total when comparing one pair to the other pair with them both 2 ramps wide. As always apor you and all the insane content. Hope all is well and hoping maybe you can find time to offer some insight (unfortunately no pickup truck so that a main concern asidevfrom total weight if they need to be mounted somewhat permanently) thanks brother 🍻
Nice drivein man
Hey I recently got a k8 rtr and I’m thinking of adding m2c parts to it (chassis, driveshafts, shockshafts) but do you think it’s better to just go with EXB version instead of upgrading the K8 rtr? Thanks!
A M2C'd truck will be much stronger and more bang for your buck imo! I'd at least go chassis, towers, driveshafts and braces!😎💪💪
Wow!!! That was impressive!!!
Amazing video, may I ask what modification were done to your diffs? Shims, lock, or open?
Thanks!!👊I'm running stock diffs just 1.5 mill front, 20 mill center and 500k rear.
@@RCDUDE81 thank you, may I ask if you know the m2c part number used for your motor slide?
What is your opinion of the rpm arms? Some say not to do the upgrade bc of bending drive shafts. I have the M2C driveshafts and just curious if you found additional flexing of the driveshafts bc of the more flexible plastic
They are more durable for sure but also flex more. I don't like that they don't have a place for droop screws so it's full shock action which puts a lot of strain on the shocks. You can add limiters inside the shocks to compensate if you decide to run them.😎👊
Them parts look tuff 💪💪💪💪. Nice bash to brother. You think Mitch will do something for the 6s line as well? Thanks for the vids bro👊👊👊👊🤙🤙🤙🤙💯💯💯🔥🔥🔥
Nice video. Do u have a part # for those o rings?
Thanks!👊The O rings actually didn't last long term. I'll probably experiment with rubber tubing like rc boat cooling line or gas line.
Made my day brother Eric 🥰. Looked dialed as few, with the all new 7mills shaft and the beef rod-end ❤. Big airs at its finest 🥰🥰
Thanks Brother T!!😁Yeah these upgrades are icing on the cake! Fearless bashing now!😜
Will they have shock upgrades for the 6s lineup?
patience
@@averylooper5534 🙍♂️🙇♂️
Maaan this has me wanting to pull the trigger on a exb
Any info on those shock o rings?
Can we buy the o rings from m2c ?
I'm not sure. I'll ask him. These are 7mm o rings to fit these shafts. Works perfect!🤙
@@RCDUDE81 thanks bro. I get some whenever Mitch release the shafts
Blast killer is back...🤟🏻
Im working night shift now.. after i watch your video..man.. my hand are itchy..can't wait to get home tomorrow morning..and bash my rc..😜
I have a beefcake k8s and running 1 to 1 using 39 tooth. What do you prefer when using 1 to 1 the 34 tooth or the 39 setup? Keep up the AWESOME vids
I've never tried a 39/39 setup so I honestly can't say. That is a larger gearing profile so may run hotter. 34/34 is about perfect imo.
When will the shafts be available to the public?
Soon! Just a tad more testing and fine tuning! We will keep everyone updated!😎👊
Which turnbuckles did you use? I didn't know it was a common issue, I'm on my second set of them. Thank you
I believe I was using EXB turnbuckle in the rear. Much more durable!
OMG 8s
Extreme rc car 😯😯
So expensive for me 😞
Where did you get your ramps from?
Can you send link or provide part number for those shock rod ends? And are they from m2c?
m2cracing.net/shop/shop.php#!/M2C-3240-ARRMA-OUTCAST-8S-5MM-FRONT-OR-REAR-SHOCK-KIT/p/478044653 This a 5mm kit with m2C shock rod ends and shafts. You can also get the 7mm beefcake version. They don't sell just the shock rod ends as they work together with the upgraded M2C shafts. You could also go stock EXB shocks. Those rod ends hold up much better!
With out the cost of the kraton truggie just all the m2c upgrades how much would you say ball park looking to get out of my gas an into electric right now I have a ro an with a .71 motor it screams but looking for something different now
For all these upgrades probably $500ish depending on what all you get. Arrma also has the EXB roller version that is upgraded out of the box for a bit lesser cost all together but not as strong as the M2C upgrades. All up to how hard you bash!
I would full send it like how you do that's how I do my gas one up until an hour ago just sold it for 1320 lost my butt on it but never get what you have in them
Name of the o rings to shorten the shocks can't find them
The o rings didn't last. I ended up taking them out.
@@RCDUDE81 what happen, and how you realize they wasn't working. I did the same
You are a seriously good fucking operator bro.
What kind of ramps are those and where can I get them.
Unfortunately you can't get these anymore. It's a custom set I made too. They came from discountramps.com but they are disco'd😝
did this got any high temps with that gearing and no fan ?
my motor gets so hot i can not touch it.
Hi dude, how are you? Could you help me please? I bended the rear M2C CVD and broken one on the front, after big jumps and bad landing. Can you suggest me an upgrade, I was thinking about the titanium CVDs, what do you think? Nice video as always mate 😉
That's some serious jumping.
How fast is it?
Thanks!👊 With this setup around 60mph.
Be careful when entering any excavation. That one looks stable but I wouldn't trust it especially if your out there by yourself.
Bloody entertaining!!!!!!
Thanks!😜👊👊🤘
What oil weight are you running in the shocks
Stock 40wt with the M2C setup.
Part number to exb 1/5 rear turnbuckles? Btw awesome bashing as usual bro 🚀 🚀 🚀 🚀
Not sure on the part #. I looked it up and scored some on ebay!😎👊
Enjoyed 👊🏻👍🏻
Thanks!😎👊
👍
Are we having a tiger wood competition here (hold in one), rich duperbash just did that not long ago with his rig.😂🤣 let see who can get it hold in one with out demage.😂🤣
Man why don't you ever aim for a down ramp at least? Always with the flat lands!!
😆Well trying to give parts the best possible test!👌I did have some nice slope transfers at the end of the vid. Hard to see.😜
🤘🏼🤠
Wish you did an install video on this. You and rich need to make actual install videos instead of just showing the product on the car then sending it
Love your video. Can u read my name?🤣
Bro please be careful when playing with them and dont let them give u a headshot in air
Full concentration believe me!😜💪💪👊
Dude bulletproof? That thing is bombproof🤣 Awesome vid sick upgrades!!
🤘🏼🤘🏼
Hey bro. Wat if we talk on the side r publicly it doesn’t matter to me i just fig. Its no 1 business wat we chat about but please let me know an yes its about the Rc ? Thanks for ur time bro.
If u wanna chat i can give u my cell so no rush just when u get a chance please cuz ive got to get me 1 of those an i want it identical to the 1 i just watched on ur last TH-cam video so please get bk. To me an looking fwd. to talking with ya!